The Bull Moxon Vise

[@raphaellouis1077]

As Minecraft Kid says so well, you are perfection. I discover your channel and it's magic for the eyes, so much passion for this work just makes you want to do the same. really respect, the word is weak ..... you have to invent the word that goes with the passion you give to your work

[@TheWoodCrafter1]

It is always pleasure to have great people like you around, like the sun light brighten our life! I pined your comment. Thank you.

[@marklybrand820]

Your attention to detail in everything you build IMO rises to the level of art. Keep it up.

[@TheWoodCrafter1]

Thank you Mark 🤝

[@normolson1]

Precision personified, beautiful, thank you

[@TheWoodCrafter1]

Appreciate it your nice comment 👍

[@brucecomerford]

Lovely. Dramatic music too!

[@TheWoodCrafter1]

Thank you 🤝

[@GuffyOffical]

If perfection has a name it would be you for sure!!! Every piece you start is always a mystery. I love the details, the precision and most importantly the passion for what you do. This is absolutely spectacular. Always following!!

[@TheWoodCrafter1]

❤️ Thank you so much 😊

[@jeffforbes3772]

Very cool! Nice production as well. Thanks for posting.

[@TheWoodCrafter1]

Thx, 👍

[@KieuPho]

Beautiful craftsmanship & ZEN to watch.

[@TheWoodCrafter1]

Thx man🤝

[@dondavis769]

Where can I buy the parts to make this vise? Beautiful work by the way!

[@TheWoodCrafter1]

Here you go www.dictum.com/en/accessories-and-clamping-devices-baoe/moxon-vice-spindle-set-716278

[@GOMacDUB]

Beautiful work.

[@michaelrosenlof1084]

Superlative job, thank you for sharing ✅👍

[@TheWoodCrafter1]

Thanx Michael, I too like all your sweet comments, appreciate your support man.

[@adventurer1977]

Epic build

[@sadik9013]

I have no words it's some thing like magic great job really impressive

[@TheWoodCrafter1]

Thank you Sadik, appreciate your nice comment 🤝

[@basharkhawaja3852]

what a piece of work! All the best buddy :)

[@TheWoodCrafter1]

Thanks man, glad to hear that 👍

[@bg6217]

You do some seriously nice work! That said, and admitting that I watched this after a cocktail, the “epic music” at the end made me laugh hard! A bit over the top… keep that up!!! :)

[@TheWoodCrafter1]

🤗 thx man 🤝

[@ahmedmo4727]

فيديوهاتك راحة نفسية ❤️🥰🥰🥰تسلم هاي الأيدين الي أنتجت لنا هذا الفن المتقن أن الله يجب من عمل عمل أن يتقنه وأنت وصلت لدرجة أعلى من الأتقان الله يخليك ويوفقك ❤️❤️❤️

[@TheWoodCrafter1]

حبيب تسلم هذا من لطفك وذوقك الرفيع تحياتي لك واهلا وسهلا فيك كل عام وانتم بخير

[@ahmedmo4727]

@@TheWoodCrafter1 وأنت بخير والصحة والسلامة ❤️

[@jasonbrown5060]

Very nice. Where did you get the vise hardware from?

[@TheWoodCrafter1]

Thank you, www.dictum.com/en/accessories-and-clamping-devices-baoe/moxon-vice-spindle-set-716278

[@dirdick43]

Nicely done!

[@TheWoodCrafter1]

Thx man

[@southernstar4353]

Beautiful work. I just watched the build for your workshop, i would be interested in a video about wood working techniques, tools and styles from your part of the world. Im sure others would be too, just something to think about if you run out of video ideas in the future. Keep up the good work my friend.

[@TheWoodCrafter1]

Thank you for watching and for your comment, will consider this for future 👍

[@leonardogarabitolopez7606]

Sencillamente Hermoso y duradero! Digno de tenerlo en cada Taller!

[@FaridQQ]

Professional work 👏👏 أحييك على هالعمل المتقن والاحترافي ..بالتوفيق 🌷

[@TheWoodCrafter1]

تحياتي لك وشكرا على المتابعة

[@cristianemanuelherlein6462]

Hi, i am new to carpentry and i am planning to build a Moxon vice. There is any reason for the treaded rod to be sticking out in the front instead of sticking out of the back? Could you fix the handles to the rod and spin them all together to tighten the vise?

[@TheWoodCrafter1]

Hello Cristian and welcome to the lovely woodworking world 🤝 About your question, the old Moxon vise design was similar to the one you have described, however modern Moxon vise designs have a Moxon with cast iron hand wheels for rapid and easy movement. However, Instead of the handwheel turning the screws and having to work under the weight of the moveable jaw, the new design fixes the screws to the vise itself (they don’t move) and tapped the handwheels, allowing them to move in and out on the rigid screws.The mass of the cast iron and the polished acme threads allows the handwheels to spin freely and do the work of drawing the jaws together effort- lessly. If you use the old design that fixes the wheel to the threaded rod you will not be able to spin the wheel that fast for rapid gripping. Hope this will help you decide. My 2 cents 🙂

[@michaeldoherty3693]

Great work as usual , do you have plans and where did you get hardware ?

[@TheWoodCrafter1]

Thx Michael, Unfortunately this project was sketched on paper not on a CAD software, for the hardware here is a link www.dictum.com/en/accessories-and-clamping-devices-baoe/moxon-vice-spindle-set-716278

[@michaeldoherty3693]

Thank you very much , I want to build that moxon vise. Went to website. Have to figure out how to order from Germany. Thanks again

[@TheWoodCrafter1]

I think they ship internationally, good luck 🤝

[@luismigueldominguez5487]

Excellent work, 👏👏👏👏

[@TheWoodCrafter1]

Thank you 👍

[@khaledelarbawy862]

God willing, great artist.

[@TheWoodCrafter1]

Thank you my friend 😊

[@rickhickman2730]

What finish did you apply? Wonderful work!

[@TheWoodCrafter1]

Thank you, for this I used polyurethane for more protection, hope this helps.

[@carldoucet]

Outstanding workmanship! Now, where's mine?

[@TheWoodCrafter1]

Thank you, 🙂

[@dobbysocks4826]

Wonderful build. Can I ask the source of the t style nuts on the back of the vise?

[@TheWoodCrafter1]

Thank you, sir, for the Moxon vise hardware, it is from Germany, the Dictum company. you can search the company name and you will find it easly. hope this will help you.

[@dobbysocks4826]

@@TheWoodCrafter1 Thank you so much for you time.

[@TheWoodCrafter1]

Most welcome 🤝

[@defensorforge3239]

Very Nice!

[@Bjornarp]

how anyone can downvote this is beyond me. Beautiful vise!

[@TheWoodCrafter1]

Thank you sir 🤝

[@loydalexander154]

What kind of wood are you useing on your vice please

[@TheWoodCrafter1]

Hard maple and for the vise face cherry

[@loydalexander154]

@@TheWoodCrafter1 thank you he'll of a job on it that's cool 😎

[@BrentDaughertyMe]

Where did you get the moxon hardware? I didn't see it in the video or the description. Beautiful execution.

[@TheWoodCrafter1]

Thank you Brent, I hope this will help www.dictum.com/en/accessories-and-clamping-devices-baoe/moxon-vice-spindle-set-716278

[@13Adenilson]

Que perfeição, parabéns, congratulations

[@Mr.Amplifier.]

Do you have a link for those wheels ?

[@TheWoodCrafter1]

Here you go www.dictum.com/en/accessories-and-clamping-devices-baoe/moxon-vice-spindle-set-716278

[@Pyatigor4anin]

Хорошая работа. Ну или-good job. 👌👍

[@TheWoodCrafter1]

Спасибо 🙂🤝

[@michaelshipman1171]

Another precise build, very well done. I was wondering what was different about your timber, then I realised, I haven’t seen a single knot in any you used! What timber is that?

[@TheWoodCrafter1]

Thx Michael, The one used for the Moxon vise was hard maple, and for the front jaw was the cherry wood! cherry wood usually has knots but I tried to avoid them as much as I could especially for a vise. hope this helps.

[@amantegamboa4213]

Wow excellent

[@malathabunasser6895]

ايش هالحلاوه هاي، الله يسلم ايديك 💪🏿

[@TheWoodCrafter1]

حبيب تسلم ملاذ 🌹

[@eliekassis7877]

Amazing well done !

[@TheWoodCrafter1]

Thank you bro 🌹🌹

[@rickkinney1249]

WOW THANX RICK

[@ВладимирЗахаров-в7б]

Не знаю, стану ли я когда-нибудь пытаться сделать себе что-то хоть отдалённо похожее на ваши приспособления...... Но ваши видео смотреть буду всегда и с удовольствием.

[@TheWoodCrafter1]

Спасибо, сэр, за ваш комментарий, мне приятно это читать, и я желаю вам всего наилучшего.🤝

[@xpdarkface]

Merhaba Ölçüleri paylaşa bilir misiniz lütfen.Mükemmel işçilik saygılar

[@khaledelarbawy862]

ماشاء الله روعة ربنا يبارك لك يا محترم

[@TheWoodCrafter1]

تسلم يامحترم واياك ان شاء الله 🌹

[@MrQotoz]

رائع.. أحييك

[@TheWoodCrafter1]

شكرا على المشاركة 👌

[@robertharper8702]

Over kill