Forgotten Woodworking Tool (The Chair Maker's Vise)

[@MarkLitchfield]

This is like the woodworker's equivalent of the Clickspring channel (minus dialog). It is another one of those that I could watch non-stop.

[@TheWoodCrafter1]

🙏🌹🤝

[@jimmyfleebot]

First video I've watched from this channel... about 1min in and saw this comment. Subscribed. Anything worth comparing to Clickspring must be worth a sub.

[@TheWoodCrafter1]

@@jimmyfleebot Welcome aboard

[@jimmyfleebot]

@@TheWoodCrafter1 "board" I see what you did there

[@PyroForge]

Agreed. Another channel to add to the list with Clickspring and Stavros Gakos. Just discovered and subscribed!

[@DUSTEATER2]

After 40 yrs of working wood I thought I had seen it all, you sir are truly a craftsman. This is now my favorite WW channel.

[@TheWoodCrafter1]

Thank you sir, pleasure to read your comment and welcome aboard 🤝

[@WideAwakeHuman]

That horizontal japanese saw blade holder along with the flat surface on that vise is genius and actually something new that I've ever seen before.. brilliant!!

[@TheWoodCrafter1]

Thank you 🤝

[@Osianr]

Yeah I’ve never seen that type of saw either, very clever!! Did you invent that saw mr woodcrafter Just subscribed after watching this, carpenter myself, excellent work, second to none!👍👍

[@TheWoodCrafter1]

@@Osianr thank you, no I didn’t invent it but I made my own version using a Japanese saw for cross cutting and rip cutting! and used it for tenon cutting to start a straight and parallel cuts! Hope it was helpful 🤝

[@gbwildlifeuk8269]

Let's think of a more difficult way for a saw to follow a line. I know, let's saw horizontally with a very short blade between two pieces of wood! 🤦‍♂️

[@dragunov525]

I've watched this 3 times already because of how impressive your precision is. I hope to one day be as skilled as you. Thank you for sharing.

[@TheWoodCrafter1]

Thank you, Scott, it is my pleasure to read your comment, it is all about practice and patience, my skills are no better than yours, I just spent more time doing this than you, that is all my friend.

[@Uli_Krosse]

The KZbin algorithm works in misterious and unpredictable ways. Oftentimes it seems to have lost all of its marbles, but every once in a blue moon it drags me to a channel like this one. Yes, this is what I want. Thank you, algorithm. You could have given this one to me sooner, but I am grateful nonetheless.

[@TheWoodCrafter1]

😊🌹🙏🤝

[@Neeboopsh]

yes it does, fellow skull guy. note the "dimples". durham is incoming

[@mjiii]

I can't get over how great that wood looks. Beautiful grain pattern and no defects whatsoever!

[@TheWoodCrafter1]

Thank you very much!

[@crowlers6]

Sir, your woodworking precision, perfect 45 degree and 90 degree angles are perfect every time! I absolutely love your woodcraft KZbin channel!

[@TheWoodCrafter1]

thank you sir and most welcome 🤝

[@ZenEugene]

Wow. I'm a carpenter with five years of experience but have never seen such precision in a hand saw.

[@johnbesharian9965]

Just like Carnegie Hall, it takes practice [to get there].

[@ared18t]

Look up sashimono woodworking

[@reaper060670]

I saw the Forgotten Tool and what was in the brackets and it peaked my interest. I have heard about these devices before but never seen one being made or even one in use. My 1st words when I saw it fully assembled were WOW, WOW, oh my days, that is beautifully made. The dovetails look so good too. I don't know what it is about Dovetail joints but I love the look of them when the colour of the end grain .. Brilliant build my friend. Really enjoy ur videos. I don't comment on many videos with woodworking over the last while but this one is a stunning build it has to be said. I enjoy watching great craftsmen and women at work..

[@TheWoodCrafter1]

Thank you, appreciate your comment 🤝🌷

[@r.parker1933]

I absolutely love a good vise. I don't know what this one would bring me that my Moxon vise doesn't, but that's no reason for me not to make one! Really, really excellent craftsmanship.

[@TheWoodCrafter1]

Thank you 🤝, there is a link in the video description showing how it is used and I have used it also during this video too The Dwarfed Behemoth Roubo Bench with Arms (The making of the body). kzbin.info/www/bejne/mZixmWaZn6yVd80 Hope you find it useful!

[@johnk6352]

Incredible craftsmanship still exists in Massachusetts! Mesmerizing watching you make that. thank you so much.

[@TheWoodCrafter1]

Thank you buddy 🤝

[@Alex_science]

This is not a vise. This is an art piece! Fantastic the precision and quality. Congrats.

[@TheWoodCrafter1]

Thank you very much!

[@eclipsestorm1975]

It's guys like you that make it so damn hard to be good. You are a true Craftsman. Wonderful work sir

[@TheWoodCrafter1]

Thank you sir, my pleasure 🤝

[@brendaharrington5783]

This in itself is a beautiful work of art! Thank you for sharing this. You reminded me of working with my dad on his carpentry builds. He used all the tools you did and you reminded me of what each one was for.

[@TheWoodCrafter1]

Thank you, good to know that this video has brought to you good memories 🤝

[@fredcheung1940]

Truly wonderful craftsmanship. Thank you for sharing.

[@howler6490]

ZEN...and the art of vice making. True magic.

[@TheWoodCrafter1]

🌹🤝

[@tri4ben]

Wow, so much precision. Jood job!

[@deanwellerassociates]

Stunning craftmanship and a beautiful result.

[@TheWoodCrafter1]

Thank you Dean.

[@RBuckminsterFuller]

Liked for that saw. Holy crap the accuracy is intense.

[@markgoode4109]

Outstanding craftsmanship. It was a pleasure to watch and learn as you work to such a high standards. Thanks for sharing. Best wishes.

[@TheWoodCrafter1]

Thank you too, my pleasure 🤝

[@robertocspinto]

Not a tool but a masterpiece. Congrats!

[@TheWoodCrafter1]

:) Thank you sir

[@benrudman3917]

This is absolutely incredible. What a joy to watch.

[@TheWoodCrafter1]

Thank you ben, appreciate your comment man

[@Monkey80llx]

This is the kind of workmanship that made me obsessed with woodwork! ❤️🙏🏼

[@TheWoodCrafter1]

🌹🤝

[@colinmcmb]

I recommend skipping to 16:20 and turn off the sound.

[@DamnYankeeWorkshop]

You quickly earned my Like when I saw that cool jig to hold your detached Japanese saw blade so you could cut the first piece horizontally. Nice! I enjoyed the rest of the video too. Subbed!

[@TheWoodCrafter1]

🤝🌹

[@dariushmilani6760]

Great workmanship. Very enjoyable.👍👍Liked and subscribed.

[@pirakoXX]

First time here, but what a pleasure to watch that kind of precision and skills. And the tool with a saw blade between two pieces of wood to cut or start cutting a precise 90 degrees angle; I've never seen that before, and that is so genius and simple at the same time. Thank you so much! / Pia, a new subscriber from Denmark

[@TheWoodCrafter1]

Thank you sir, and welcome on board, pleasure to read your comment 🤝

[@pinkerbot]

Helt enig 🙂

[@ikust007]

Love your idea for the saw

[@saileshnamah]

You master your carpentry task well. You are dedicated to perfection with what you do and I really enjoyed watching this video. It inspires me and others. God bless you, take care and stay safe.

[@TheWoodCrafter1]

🤝🌹

[@ChristopherSalisburySalz]

Outstanding!! That is a great looking vise and some amazing craftsmanship.

[@TheWoodCrafter1]

Thank you Christopher, appreciate that man🤝

[@Keefymonoped]

Impressive level of both skill and patience. Brilliant, well done sir!

[@TheWoodCrafter1]

Thank you sir 🤝

[@donniewillis2926]

Please correct if I am wrong as I am still learning, but doesn't that truly magnificent work of art vise you made, function much like a tail vise but having the benefit of being fully enclosed? And I absolutely agree with everyone else, you are a true craftsman.

[@TheWoodCrafter1]

Thank you sir, please check here www.popularwoodworking.com/techniques/perfect-shoulders/

[@j.r.millstone]

I like the way you did the metal ways.

[@TheWoodCrafter1]

Thank you, this should be more durable than the wooden rails 👍

[@davidh5101]

Well done. You work wood like a machinist.

[@TheWoodCrafter1]

🤝🌹

[@joedance14]

Beautiful work!

[@adrian_belle_arti]

wow! beautiful piece and amazing skills! very pleasant to watch the process

[@TheWoodCrafter1]

🤝

[@angelremigiocardenasgutier2422]

Felicitaciones Estimado MAESTRO. Una presision milimétrica envidiable. Gracias mil por compartirme su excelente y práctico diseño.

[@TheWoodCrafter1]

Gracias amiga por tu tiempo y comentario.

[@VAFSH4LIF]

Absolutely Gorgeous.

[@FearsomeWarrior]

I saw the detailed handle and end cap the handle goes through. I think you made all that, but the thread and collar are from a kit? Lee Valley perhaps? Thank you.

[@TheWoodCrafter1]

Actually from a junkyard 🤷‍♂️

[@johnbesharian9965]

Marvelous; like a European cabinet makers shoulder vice, the bench screw is behind the movable jaw, so you can clamp dovetail boards at both a comfortable height [because there are no guide bars in the way like on an ordinary face vise], and you do not have to worry about the vise jaw wracking.

[@michaelrosenlof1084]

Absolutely superb-Thank You ✅👍

[@TheWoodCrafter1]

🤝🌹

[@5phutsangtao-iQ]

Valuable wood clamping tool

[@TheWoodCrafter1]

Thank you 🤝

[@johnmcclain3887]

I believe I need to make one out of steel to work tooling on my bench in my machine shop. I've never seen one before, but have built a wine press, and binding press, and can see it being able to be turned every which way, and clamped for more work. Thanks, I appreciate the idea!

[@TheWoodCrafter1]

🤝👌

[@johnmcclain3887]

@@TheWoodCrafter1 I've enjoyed working in wood my whole life, and yet work metal, despite the fact it doesn't bend to the will quite so easily. I love to see fine craftmanship, it's disappearing from my country, but is still to be found. I make tooling for my work, and generally put it in wood boxes, for protection for life. I've never used such a form of saw, to perfectly set the height of dovetails, and have always labored trying to get them at "the same deck height", I think I might have to make one. I use very similar method and tooling, to mark out precise lines, shapes, on a surface plate, but never thought to use it to set cutting height, and keep it. I learn something new every day. I'd enjoy a couple weeks in your shop, or you in mine. We'd do well together. Semper Fidelis, John

[@TheWoodCrafter1]

@@johnmcclain3887 pleasure reading this, I would enjoy working with someone who have a similar mindset, I enjoy experimenting with different techniques, I also believe that 2 brains are better than one, maybe one day we can meet who knows :) thank you for your time and thoughtful comment.

[@eightys_style6077]

That's really cool, I could of used one of these plenty of times. I'll attempt this one day.

[@TheWoodCrafter1]

Thank you, and good luck with your build you won’t regret it 🤝

[@elwakil]

In love… beautiful craftsman..

[@TheWoodCrafter1]

Thank you Alaa, appreciate it 🤝

[@GuffyOffical]

Man! This is incredibly satisfying to watch!! Amazing engineering and execution!! Way to go

[@TheWoodCrafter1]

🤝thank you man

[@pkart510]

Hello sir I'm from Nepal . I like and love your video . And your tools also it make me crazy .

[@TheWoodCrafter1]

Thank you and welcome friend 🤝, tools are essential for woodworking but you can start small and grow your collection by time , 🤞

[@pkart510]

@@TheWoodCrafter1 yes sir, I am a carpenter and I really love to collect the tools. And thanks for your suggestion .

[@TheWoodCrafter1]

🤝

[@mansourhindi5433]

جميل جداً جداً، فيديوهات ممتعة يسلموا إيديك على هالشغل المتقن

[@TheWoodCrafter1]

🤝

[@natazer]

As an introvert, I approve of this video.

[@bradthayer6782]

That thing is effectively one solid piece of wood, plus a movable jaw. Beautiful and incredibly solid.

[@TheWoodCrafter1]

🙂👌🤝

[@wolfpackpete6408]

A thing of beauty. Perfection achieved. 👌

[@wilarguello1598]

Gustó, limpieza, diseño y buena madera. Saludos desde Nicaragua

[@Mr_Rick]

Very nice work. Excellent build.

[@TheWoodCrafter1]

Thank you 🌹

[@andrefrost4631]

Beautiful work, that's what I call craftsmanship 👍

[@TheWoodCrafter1]

🤝🌹

[@isak990711]

Well thought out project! And very beautifully crafted. A small tip that can help with reducing gaps in the dovetail joint is to cut with the saw around 1mm from the marking and then finish working up to the marking with a hand chisel. If your markings are perfect, so will the joint become. Although it takes slightly longer to do the finishing touches by hand chisel. The results become more precise, IF you have a steady hand, then a tablesaw saw where if it is misaligned by half a millimeter, it will show up on the end result. My personal opinion aside, great video!

[@TheWoodCrafter1]

Thank you for the tip👌

[@timmellor1454]

Beautiful from start to finish

[@bolekilolek6318]

There is so much I could learn from this one video alone! I love all the simple jigs you use to ensure all your cuts stay accurate. I’m going to try each of them! Thank you keep up the quality craftsmanship.

[@TheWoodCrafter1]

Happy to know that man, thank you and good luck 🤝

[@ВладимирЗахаров-в7б]

Всегда приятно смотреть на работу перфекциониста ! Отличное видео, подписался не раздумывая ! Успехов !!!

[@TheWoodCrafter1]

и всегда приятно читать сладкие комментарии от хороших людей, спасибо и добро пожаловать

[@johnsutcliffe3209]

Can't wait to see what you make with this

[@TheWoodCrafter1]

👌

[@paulhaegi5817]

THANK YOU FOR YOUR EXCELLENT VIDEO, YOUR COMPETENCE AS A CRAFTSMAN. BEAUTIFULLY FILMED. WHERE COULD WE GET THE METALPARTS? COULD YOU PLEASE ADD A RETAILER TO BUY THEM? THANK YOU FOR SUPPORT. Paul, Italy

[@TheWoodCrafter1]

Thank you Paul, honestly I am not sure where you can find these in Italy, I found them on a junk shops and metal working supplies shops, maybe if you search for threaded rods and steel bars online you will find some online suppliers! Hope you will 🤝

[@ramezyaghnam5843]

Your videos are so satisfying to watch! Amazing work 👏

[@TheWoodCrafter1]

Thank you Ramez, appreciate it my friend 🤝🌹

[@TheWoodStroker]

Beautiful work. Only distraction is the overly dramatic music.

[@joegiotta7580]

Really nice work. Is that like a portable shoulder vise?

[@TheWoodCrafter1]

Thank you, you can use this vise to hold the workpiece and use the miter jack saw to cut tenon shoulders in reference to the vise top surface. I have uploaded previous video on this channel showing something similar if you wish to check it out “how to cut perfect tenons on the miter jack “

[@conkick1192]

Bonjour, Vraiment un belle étau, il faut que je m'en fasse un dans les plus brefs délais. Merci pour cette vidéo, prenez soin de vous et de votre famille, à bientôt.

[@КонстантинСавин-й6ы]

Даже слово,,великолепно "будет мало сказать!Это просто ФЕНОМЕНАЛЬНО!

[@TheWoodCrafter1]

человек! спасибо за ваш сладкий комментарий, ценю это.🤝

[@ilyakai10]

Сделано хорошо. Только не очень понятно зачем. Какой выигрыш дают эти тиски в сравнении с привычными столярными? Или просто реплика технологии 18 века?

[@TheWoodCrafter1]

@@ilyakai10 Скоро сделаю еще одно короткое видео.

[@tonyfrancisco6739]

Votre travail est purement magnifique avec une qualité d’ajustement incomparable ! Merci

[@TheWoodCrafter1]

merci monsieur 🌹

[@Rebel1280]

What a beautiful build and video but i just cant fathom the reason for its existence given that a leg vice exists. What a labor of love.

[@TheWoodCrafter1]

Thank you sir, I will make a quick video to demonstrate how it is used 🤝

[@MrToolmaker23]

Beautiful work. Are you a tool and die maker? You show such attention to the fine details of making something that it makes me think so. Liked and subscribed. Work safe.

[@TheWoodCrafter1]

Thank you and welcome, actually I enjoy making things out of wood in general, tools are fun to make especially if they were made right! You will appreciate them every time you use them, I respect good craftsmanship and try my best when I make something. 🤝

[@AssafOppenheimer]

speaking of vises, what is the sled you are using with the table saw @1:38? it looks amazing!

[@TheWoodCrafter1]

This is the tenoning jig, it is used to cut tenons on the table saw.

[@davidcollie2051]

where do you buy the actual metal parts for this vice.Amazing workmanship

[@TheWoodCrafter1]

Thank you, the threaded rod was setting lonely in the junkyard 🙂, the linear runners are regular steel nothing special, still more durable than wood, but still can be made of wood, the other parts where machined at metal milling shop, the brass parts were turned to size in the metal milling shop and finished by me in my workshop. Hope this helps

[@in2rock275]

Where can you get one of the saws shown around the 0:15 mark and what's it called? One of the top 3 vids I've seen and I can't recall the other 2. Mad skills you have. Kudos.

[@TheWoodCrafter1]

The saw you have seen at 0:15 is made from a Japanese saw blade, there is another video on my channel where I show how I build it “how to cut perfect tenons on the miter jack”. I think such a saw is expensive to buy but easy to make, if you still want to buy one then search for “miter jack saw” good luck and thank you for your sweet comment 🤝

[@burntsider8457]

I learned much from watching this video. Mostly I learned that I'll never be a craftsman so I'm burning my woodworking shop and taking up knitting.

[@TheWoodCrafter1]

Man your comment made laugh, don’t know what to say! regardless of that. It is all about practice and trying to imagine how to approach things before you start doing them! Hope this helps, my best wishes 🤝

[@farrier2708]

Beautiful build by a master craftsman. However, I would like to have seen the unique uses of this particular design. I can imagine that it could apply considerable pressure and still remain square but what is the advantage over a normal bench vice? Subject of another vid', perhaps? I must say that it's very rare that I see something completely new on YT but I have never seen the horizontal saw idea before. Thank you! It's something I will definitely try out for myself.

[@TheWoodCrafter1]

Pleasure to read that, I will think of another video to show how it is used, hopefully soon. Thank you for your comment. cheers

[@johnbesharian9965]

Well, for one thing, like a European cabinet makers vice, the bench screw is behind the movable jaw, so you can clamp dovetail boards at both a comfortable height [because there are no guide bars in the way like on an ordinary face vise], and you do not have to worry about the vise jaw wracking.

[@farrier2708]

@@johnbesharian9965 I'm judging from the vid' that the jaw width is around 100mm (4"). That's just marginally wider than the clearance between screw and guide bars on my 360mm (14") bench vices. I would, therefore, have no problem using my bench vice as he is doing here. The only thing I can see, that makes this tool different from my vices is that it is portable. Don't get me wrong, it's beautiful design expertly constructed. I just can't see any unique advantage other than portability. When I'm shown how to use it properly, I will in all probability say; "Oh yes! Why didn't I think of that."

[@TheWoodCrafter1]

Thank you for your comment, I just published a video showing how it is used, but still you might find other ways to do that.

[@farrier2708]

@@TheWoodCrafter1 I have just watched your vid' and it's nothing to do with the way the work is held. Is it? It's the support for the saw I liked so much that makes it a unique tool. "Oh yes! Why didn't I think of that." ¦¬)

[@mattwal43]

Hi, great stuff, out of curiosity, what is your background? You do woodworking like a toolmaker. What are the approximate dimensions of the chairmaker's vise? Thanks for the videos!

[@TheWoodCrafter1]

Thx, Matt, I studied Business and I work in supply chain field! My background has nothing to do with carpentry 🙂. This vise is 9.5” X 7” X 4”, stock thickness is 1 3/4”, nothing critical here though you can add some more inches if you don’t mind the weight and have enough space! Good luck 👍

[@JanStureNielsen]

Another beautiful build! I love your attention to details -- project really showcases your craftsmanship.

[@TheWoodCrafter1]

Thanx Jan, my pleasure reading that 🤝

[@JanStureNielsen]

You didn't do the metal lathe work in your shop, right -- the threads for the vice, etc.?

[@TheWoodCrafter1]

@@JanStureNielsen yes, I don’t own a metal lathe, I had to do that on a commercial metal workshop! I do this when I need some metal parts only.

[@nanaandbump.]

Beautiful work! And awesome idea for that plane/saw combo thing - I'm new to woodworking, but thats the first I've seen of such a tool, and it seems so incredibly useful! Great work

[@TheWoodCrafter1]

Thank you, 🤝glad you found it helpful

[@bethoughtprovoking]

Nice demonstration. But what more does this vise have to offer than a tail vise?

[@TheWoodCrafter1]

If you constructed your tail vise dead square from all sides and square in reference to the top surface on all 4 sides to give you exact same cut on the 4 sides of the tenon you are cutting then yes they can do the same job except for the mobility! Just wondering how the tail vise will be constructed to meet these standards, or maybe that is just me .

[@bethoughtprovoking]

The truth is that any functional vise has an acceptable degree of accuracy built into it; otherwise, it would serve no practical purpose as a tool. Consequently, anything beyond reasonably accurate is simply overkill for a vise. That said, you did build a robust vise, one that doubtless will last a lifetime. Nonetheless, I stand by my original query: What more does your vise have to offer? Apparently, it seems to come down to the advantage of mobility. Yet, as you’ll see in a moment, mobility can likewise be construed as a major disadvantage. In fact, one of the great benefits of incorporating a tail vise into a workbench is the added convenience of not having to bring one to the bench in the first place. Here are some problems with the concept of a bring-to-the-bench vise. First, consider that workbenches are built at the optimal height for doing handwork easily and comfortably. Your design, unfortunately, increases that optimal working height considerably; from the looks of it, your vise stands at least 6” off the bench surface. That’s not necessarily a bad thing; it could be that you want to get closer to your workpiece. But the truth is not everyone does. Next, the purported advantage of mobility is severely minimized by the realization that there is very little room to face your workpiece from either side of the vise. I could see myself standing there, cramped against the face of the bench, trying to get in line with my cut. Not exactly what I would consider an ideal work position for my back. Of course, you could clamp the vise to a corner of your bench and circumvent the problem entirely; but, in that case, why not just stick with the ideally-positioned and unobtrusive tail vise in the first place? Am I making sense? And, then, there’s the issue concerning the inherent bulkiness of the vise itself. Look at it. It’s massive! Imagine working in a busy shop and not being ready just yet to unclamp the vise. What a nuisance it would be, having a thing like that protrude from your bench! I don’t know about you, but I see that as clumsiness. In my opinion, it detracts from the work area’s efficiency. And, finally, the positioning of the vise is a limitation in itself. Needless to say, most of us have either cabinets, shelves, or drawers incorporated into the undersides of our benches. In woodworking, however, there are many instances in which a curved workpiece can only be clamped if there is clearance underneath the workbench. This problem is easily handled by the tail vise because of the overhang on the end of the bench.With your design, however, one can only perform such an operation if the vise is positioned on the end of the bench-not in front of it. Now, again, that might not be so bad, if that space is available. But what if it isn’t? More inconvenience…. I believe accessories in the shop must be duly warranted. Sorry to say, but all you accomplished was to construct a well-functioning tail vise. I prefer to have mine incorporated into my bench. (N.B.: I can do the same kind of accurate clamping with a piece of paper in my vise, too.)

[@TheWoodCrafter1]

@@bethoughtprovoking 🙂It is always a pleasure to read other opinions yet it offers a huge amount of shared experience, From what you wrote it shows that you are an experienced woodworker no doubts, I have no objections to your statement! I am just thinking how I will cut a tenon shoulder for a workpiece that is longer than the height of a workbench with a tail vise fitted on it? this may not be so common but that depends on what we are making.

[@davidhainline6357]

Beautiful. I’m wondering what engraving bit was used on the brass?

[@TheWoodCrafter1]

That was a 60 degrees v bit, any bit with zero point can do the job, the one I used is German made but there are other good brands on Amazon too.

[@francionedeoliveira2238]

Exelente projeto profissional mesmo parabéns, linda morsa.

[@TheWoodCrafter1]

Obrigado por seu comentário doce

[@tomkane5173]

Looks great, but...what do you do with it that a normal vice can't do?

[@gerryoneill8881]

Seems like a regular vice would do the same job. It was well made though with great skill and the right tools and machinery.

[@stevensantos3398]

Seems like a regular Gary would be a bit smarter than that but great spelling.

[@ckeithdunn]

Watching this was like witnessing the creation of the Universe. *Mind Blown*

[@TheWoodCrafter1]

🙂 Thank you for your sweet comment 🤝

[@mavenfeliciano1710]

My only question is how would this be any different than a regular table vise, (besides being able to hold tools on top)? It seems too small to actually hold a chair.

[@TheWoodCrafter1]

🙂 It won’t be used to hold the whole chair! Only parts of the chair before assembly, it will aid you in cutting tenon shoulders for the chair parts at 90 degrees and other angles, thus it is not a regular vise just for holding the workpiece.

[@maf3434]

Hey! I envy you. But I do not envy the fact that you have such a tool, I do not envy the fact that you have such material, I envy the way you love your work.

[@TheWoodCrafter1]

🤝

[@AeromodeloRCBr]

Congratulations, great job, could you describe what kind of wood was used in the project.

[@TheWoodCrafter1]

Hard maple sir

[@eggster71]

Stunning. I'll have two please! 👍

[@JasonQuackenbushonGoogle]

how did 18th century chairmakers set up their table saws and metal lathes though?

[@TheWoodCrafter1]

The old ones were made out of wood only, this is a modified one :)

[@jerrynix5206]

Man that is some amazing craftsmanship for sure! Also looks like you have a lot of cool shop toys, i'm jealous !!!

[@TheWoodCrafter1]

Thank you Jerry, 👌 🙂🤝

[@ZouritWoodshop]

Amazing work ! Congrats

[@TheWoodCrafter1]

Thank you mate.

[@hansholzwurm4875]

fantastic Job

[@TheWoodCrafter1]

🤝thank you

[@limpkhan1131]

Смотрю и просто наслаждаюсь вашей работой ! Здоровья вашим рукам 👍👏👏👏👍

[@TheWoodCrafter1]

спасибо, сэр, рад это прочитать🤝

[@leonardogarabitolopez7606]

Realmente una Obra de Arte. Demuestra carácter, pasión y amor por la Madera. Fabuloso! Quisiera tener un ejemplar como ése. Cómo podría, por favor?

[@TheWoodCrafter1]

¡Gracias, desearía poder hacer más! con el trabajo diario, la familia y el canal es difícil encontrar tiempo. perdóname, pero estoy seguro de que puedes hacerte uno.🤝

[@RPMWoodworks]

Is there a video on the 90° saw, assuming you made it?

[@TheWoodCrafter1]

Yes please check my videos list “how to cut a perfect tenons on the miter jack”

[@rayneaustephane2757]

hello, can you give us the interior and exterior dimensions, as well as the wood to use, please? thank you for your very informative videos.

[@TheWoodCrafter1]

Thank you for your comment, The wood I used was 1 13/16” thickness hard maple and that is after milling it square and flat, outside width 9 1/8” inside width 5 1/2”, outside length 10 1/4” and inside length 6 1/2”, being said that these are not very critical dimensions except for the thickness, you can add +1 inch for length and width, depending on how thick the stock you will be sawing but I don’t think you will need bigger than the dimensions I have mentioned! Good luck man

[@rayneaustephane2757]

@@TheWoodCrafter1 thanks very much.

[@dosulcruzeiro9672]

技術レベルの高さが異次元です。すごいです。

[@TheWoodCrafter1]

ありがとうございます

[@gilbertoportella7267]

Isso é uma obra de arte, que capricho, lindo, não teria coragem de usar.

[@TheWoodCrafter1]

😊🤝

[@davefieldhouse5119]

Very nice my friend 🙏

[@TheWoodCrafter1]

Thx dave 🤝

[@Chinochuu]

May I ask what is the name of that thing you used on the table saw to clamp your wood onto? 1:35

[@TheWoodCrafter1]

That is called the table saw tenoning jig, good luck 🍀

[@daveticehurst4191]

What's with the silly looking saw when cutting the Dovetail tenon's, why not use the correct tool a TENON saw ?

[@maf3434]

0:14 please show this tool in more detail!

[@TheWoodCrafter1]

I have another video showing how to make one , look for “how to cut perfect tenons on the miter jack “