The Charlie Show /// Episode 288 /// Max 10 G2 with EZrun G3 Unboxing and setup.

Join us for a fresh unboxing, feature run down, and setup pointers. We cover what the settings do and what you may or may not need to change. Programer usage, calibration process and more!
Product Link:
www.hobbywingd...
HOBBYWING Official KZbin
+++++ Cars & Trucks +++++
Xerun series (Professional grade)
Ezrun series (RTR / MAX upgrade)
QuicRun (starters)
+++++ Helicopters & Airplanes +++++
Platinum Series
Flyfun Series
Skywalker Series
+++++ DRONE +++++
XRotor Pro Series (Pro.Filming /industrial, Gov. research)
XRotor FPV "M" Series (FPV Racing)
XRotor Series
+++++ Marine +++++
SEAKING Pro Series (Speed racing)
SEAKING Series (Marine)
Our mission: Help create memorable moments worldwide.
HOBBYWING Factory: www.Hobbywing.com
HOBBYWING North America: www.HobbywingDirect.com
Hobbywing
Twitter.com/Hobbywing_
Copyright & Trademark
HOBBYWING is a registered trademark of Hobbywing technology.
#HOBBYWING #NerdTheNewCool #HDUB

[@4acae86]

I totally agree with you on that decal crease!!!

[@owen8538]

They should come with ec5 most battery s are ec5 connectors

[@LosihoTTT]

I get the feeling Max 5 & Max 6 G2s are on their way soon

[@JT-wf8cc]

Nice combo! I ordered the 140A with the 3665 motor for my onroad car build.

[@dandyer8351]

Look great love all the programing that we can do to them and the temps etc. Good value aswell going to try this on my senton 3s at some point thanks well presented.

[@aefanboy3464]

Hey.. I have that setup! Must install!

[@dakinechips]

I've been using the max10 for the 3 years I've been rc ing and I love em.

[@dpgcrypto7895]

I just order a 4000kv unit. I am new to RC (few weeks) and didnt do much research but seemed like the play from what i did. How do you like yours and what is your set up?

[@dakinechips]

@dpgcrypto7895 max10 140 amp with 4000kv motor on 2s on my slash and sct410.3. Trying to bring 10th scale off road to the NW where we live.

[@SurRon-GLE]

Sold ! Just Purchased 80A 4 Tec 2.0

[@Luke-en2tk]

Have they sorted the OTA programmer software problem out for Android phones yet. It seems there has finally been an update so will try again, fingers crossed

[@RC4us]

So a quick question I have the new combo with g2 140amp esc and the 2400kv g3 motor I have a guy telling me that it is not sensored that the 6 pin connector is only for temperature is this correct or is that a FULL sensor system

[@RC4us]

He says it's not fully a censored system whatever that means it either has one or it doesn't correct

[@paziwa5501]

Can i use the 80a esc with the 3665 motor?

[@AliChandra-ly4gu]

So if i dint need custom setting to this esc, i don't need program card right? Esc already good to use

[@IsaacSchultz-lz8jc]

Just wish it comes with the mounting plate.

[@justinhumphrey9260]

So can you still manually program these esc with the set button and remote/beep sounds like older hobbywing esc's? I tried the same method as with older hobbywing esc's but have no luck..im basicly asking can u still program these without the lcd box/bluetooth etc?

[@williamoleary9330]

You want to start selling lots of them? Start selling them soldered already to a variety of connectors. I hate soldering and I mean HATE IT.

[@hernandezvlog1939]

Can the programing port be used to power an additional fan?

[@thibster5590]

I notice the esc fan spins for a couple seconds then goes off. Does it automatically come on with higher esc temps

[@HOBBYWINGOfficial]

Yes, Max 10 G2, have temp sensing fans and only run when the ESC needs it.

[@albertkelly7129]

Charlie, is it possible to cut/ shorten the G3 motor wires? Thanks mate

[@HOBBYWINGOfficial]

Of course. Removing the plug ends, and re soldering them were they are needed.

[@albertkelly7129]

@@HOBBYWINGOfficial Thanks for confirming mate! [Wasnt sure as I read that some brushless motors the wires are part of the windings] Cheers!

[@dakinechips]

I mess those fans up with all the rallying I do

[@faizoulfasal3371]

I just bought the ezrun max10 g2 80amp combo..im converting from nimh..what lipo 2s C would you suggest i use?

[@HOBBYWINGOfficial]

[e-mail] can assist with Tech Support directly! Thanks!

[@ja_co_bus650]

Hi buddy, there are very little to no videos online to demonstrate the low speed startup of these systems. Could you maybe do a short video to show low speed and drag brake? I want to see if it is suitable for RC trail use since it is waterproof and sensored. I do not like the FOC on Fusion systems so I'm looking at alternatives. Thank you for your detailed tech videos.

[@HOBBYWINGOfficial]

Overall, they work "okay" for trail/scale usage, but in the end, a dedicated crawler system works a lot better and, has a stronger BEC. The drag brakes in the non crawling setups, are also "okay", but just not what most crawlers really want. More so, when compared to any of the dedicated crawling combos. On the FOC setups, you can turn off the motor pairing, or "lower" the FOC feel in the Fusion Pro and the Axe R2 combos. This makes them feel more normal when it comes to "faster driving".

[@AnthraxxRc]

So how would the 3665 3200kv do on 4s? In a heavier truck outcast 4s v2 my 120 has killed two 70$ servos and gets hot almost instantly and how would it preform with a gear ratio of 20p-50s?

[@tobydyes]

The length of the motor and just because of the sensored system

[@RC_Gubben]

Is timing changed for production? Is there only 20degree timing in 80amp esc?? (i want more) I looking for this with 3652 4100kv for my new 2wd SC.

[@lambo6892]

Hey Charlie, just received a Trax XRT, With weak links... here we go ") Got one of your max6 on the way , a steel gear servo . For now, stock motor & traxs ( cheap) gears . in your pro tip opinion , What optimal Gear ratio ? stock is 20/50 monkey metal Thank you for all your fun and support vids . Best regards, lamb Standing by in the Mountains of Maine

[@HOBBYWINGOfficial]

Please shoot us an email for questions - [e-mail]

[@thibster5590]

Hi Charlie, Love the very detailed videos. I seen a few systems for sale online and some have the color coded motor wires and esc locations. And some are just all black but are lettered. What's the difference? One newer than the other?

[@HOBBYWINGOfficial]

Models had colored wires. Most of today's do not but have letter markings on the case, or colorized shrink tubing on segments of the wires.

[@SUPERROOSTMATT]

@HOBBYWINGOfficial can you run these ESC's in the Blinky class for 4wd and 2wd 1/10 buggy?

[@sebastianjaromi3540]

would one or the other of these be better suited for my new Tekno ET410.2?

[@HOBBYWINGOfficial]

For many, they go with Racing systems from the XERun series over the basher based systems like this.

[@sebastianjaromi3540]

@@HOBBYWINGOfficial had the 80 amp in my tekno truggy for a few months now and it is working great! But i will be looking at getting the 120 amp to put into the truggy and the 80 into my soon to be acquired Team associated 2wd buggy. Ithink lol.

[@steviefpv]

Do the new g2’s come with the sticker to put on the old led program card ?

[@Xaand23]

Hey Charlie, I noticed you mentioned that you can run the G3 motor with a different ESC? I saw the adapter but it looks like that is to use the Max10 ESC with a different motor, not the other way around. Any help with that? Thanks!

[@HOBBYWINGOfficial]

Hello, We are working on releasing the "other" side of the sensor cable adaptor, but do not have it available at this time. Should be posted to our accessory section along with the other adaptor when they become available.

[@ty27tp]

Is there thermal cutoff on these systems? Is it just ESC thermal or motor too like normal max10?

[@EMERALDCOBRA]

Got a quick question, when im setting the throttle range, i follow your steps, hold set, turn on, then release set once it starts blinking but when i go to click set again when its in nuetral, the red light stops blinking but the green light doesnt come on, any fixes for this?

[@HOBBYWINGOfficial]

We'd suggest starting with the good old 'servo test'. Here's our video on it: kzbin.info/www/bejne/hIimmJWujK6jaJY

[@EMERALDCOBRA]

@@HOBBYWINGOfficial thanks, i figured it out an realised id plugged in my esc into the battery receiver plug when i shouldve put it in channel 2

[@NS5_USR]

Does the MAX10 fit on the arrma granite 4x4?

[@HOBBYWINGOfficial]

Please shoot us an email for questions - [e-mail]

[@Daytona89]

No mount plate included for the ESC....?

[@HOBBYWINGOfficial]

Correct. One can be "DIY" made out of a piece of material. Lexan/Poly Carbonate flash from a body works well, or any semi flexible abs/nylon style plastic.

[@DustinLeopard-wc3ez]

I’m looking for a combo for my Typhon 3s. With the Max10 g2 140amp esc which motor would be best running on 3s and 4s 2400 3200 or 4000. It will be just a basher vehicle.

[@HOBBYWINGOfficial]

Most are very pleased with the 3200 for 3s.

[@chrisvda7277]

​@HOBBYWINGOfficial Don't think the new 3665 fits in the MT10. Would the 3652 3300Kv with 80amp combo be better. Looking to get to 50-55 without overheating.

[@VITALIXX]

Am I able to use a g3 esc with a g2 motor (all I need to do is not plug in the temperature module)

[@HOBBYWINGOfficial]

Yes, the newer G2 ESC will work with the older motors in sensorless mode.

[@Bristol3490]

Will this run tt02 type s

[@HOBBYWINGOfficial]

Shoot us an email please! We'll be happy to assist. [e-mail]

[@tobydyes]

It was always waterproof the motor maybe not

[@SteveSoper1979]

I've been trying to get more information on this but I have a Tekno 410.3 SCT roller I came across. It is a somewhat heavy 4WD SCT. I want to run it at my track. 2s is all you're allowed there. For heavy 4WD SCTs, should I target a 540 sized can brushless motor? Or 550. My understanding is a 550 sized motor will run a pinch cooler & more torque. Really I'm just looking for a motor suitable for a SCT like that without absolutely breaking the bank. But curious on any thoughts anybody has. thanks.

[@Arturito2017]

What did you end up getting? I’m in same situation

[@runnerbaba]

Does the Max8 G2 ESC work with the new G3 3665 Motor?! sensored.

[@HOBBYWINGOfficial]

Please shoot us an email for questions - [e-mail]

[@RC.Car.007]

Would the 3300kv motor do 50mph on a 1/10 4wd

[@IsaacSchultz-lz8jc]

That definitely depends on the type of car and the gearing it could but you might need to change a few things.

[@RandomloserDK]

Is there any chance, that you would make a ~2950kv motor in the G3 SD range? It would match better with 4S and 50000rpm.

[@HOBBYWINGOfficial]

Hello, In the Max 10 G2, 140A combo has a 2400KV motor, and a 3100 KV motor option. www.hobbywingdirect.com/products/ezrun-max10-combo-3665sd?variant=40522184196211

[@RandomloserDK]

@@HOBBYWINGOfficial Yes, I know. I'm saying, it needs a ~2900kv option.

[@HOBBYWINGOfficial]

@@RandomloserDK Thank you for the input.

[@justinfraziet6843]

So you cant just install it and run it???

[@whorok305]

Time to sell all my max10s .