The "CHEAP" Tacoma, rear end and engine work! (This is Getting Expensive...) Ep.4

[@redline1666]

The 3.4 is actually zero interference so if you snap a belt its no big deal. Good video as always!

[@crashsoome]

Yes you beat me to it

[@crashsoome]

I had 282k on my engine never replaced the belt😊

[@justinmatthewl]

Yep I bought a tacoma with a broke belt. Owner thought the motor was trashed. Put a new belt on it and drove for years after that.

[@bige311]

​@@justinmatthewl same thing happened to me I almost felt guilty when I drove the truck :)..

[@KayBeee]

I know this video will be good because its Mike.

[@heladiomoreno5504]

I hit the like button before the video even starts

[@travisholmes05]

I think your suppose to use twin prong spark plugs on the 3.4 but I’ve heard guys say it doesn’t matter… there is a sticker from Toyota on the engine… love the build so far

[@MrDan1509]

OE plugs from the dealer are only a buck and some change more than the NGK Type R plugs.. I love NGK but you only get 17K miles before they have to be changed out. OE plugs are still like new at a 100k.. I just changed the factory plugs in my 2005 4runner 3 yrs ago at 235k. I know they was original because i got my rug from an old couple that bought it new and always serviced at a toyota dealership. The My Toyota Record shows they was never changed out! I gained 2 extra miles per gallon with the new plugs if that says anything about the OE plugs!

[@victorkirby7652]

Just as a heads up, that 3.4 is supposed to get a dual electrode spark plug. The 3.4 uses a waste spark ignition ignition system. The plugs fire on the exhaust stroke too when the cylinder that they are paired with is on it's compression stroke. Since the plugs fire twice as often, the dual prong makes them last as long as a single prong that is not installed in a waste spark application. Also, It's a non-interference engine, so pistons cant kiss valves in the event that the timing belt snaps

[@shelbysnake5003]

I don't mind waiting a few weeks for a new video because Mike always delivers!!

[@SDkillaa]

This Tacoma has quickly become my favorite truck on the channel! I think you should keep this one, Good budget build

[@jaromnord8325]

I’ve also heard that the oem spark plugs on these motors make a little bit of a difference over the NGK brand. Specifically for this Toyota motor. Something with the dual electrode keeps it burning the fuel more efficiently

[@JLeeChron]

3 coils for all 6 cylinders is why Toyota recommended Twins should be used for optimal spark/performance

[@jaromnord8325]

This motor is non interference which means if the timing belt breaks you actually won’t contact valves which is nie but definitely still don’t want that breaking on you. I just did my timing belt on my motor! Keep up the good work!

[@JD-um8sq]

Ive really started to dive into working on my own truck because of these videos. I like how you leave in the little mistakes here and there because it makes it seem so much more doable for us non mechanically inclined haha

[@MrDan1509]

Okay, Mike.....it's been close to a month now....we need a new video🤣

[@Tanner731]

the jeep timing chain should actually be replaced at some point, they stretch out eventually. just got done doing a 4.2 in my friends CJ and the chain was so sloppy it was eating a hole in the cover

[@g_ray_sr.]

Good thing about the 5VZFE it’s non interference so you wouldn’t have to worry about bending any valves 😊

[@ThatLJ20vGuy]

Do your self a favor and get a creeper

[@aubreychowdhury3012]

Replace the spark plugs you put in with dual electrode. That’s what these engines call for

[@tylermartelle7041]

The 5VZ is such a beast you can just let the timing belt uninstall itself and the valves won't meet the pistons.

[@atomicfroster]

timing chains can absolutely fail, ask me how i know

[@bradleyeychaner3777]

Don't know if you're a "by the book" guy but there is a sticker in the engine bay saying to use dual electrode plugs like the ones you pulled. Just an FYI. Love the vids man keep it up!

[@jsvallee567]

3.4 zero interference !

[@gk5392]

I like that you work on vehicles that us everyday folk would consider buying and building. Too many channels go to the extreme where it’s not even realistic unless you have a full blow fab shop. Keep it up

[@mikes4x4garage]

ha! im just a normal folk anyway lol

[@noahbaru]

That grill has got to go

[@cpsmonroe1]

Don’t sleep on the M12 Fuel Stubby. It gets into tight spaces and can still pull a bulls nuts off. It’s great for engine work as well lol. Still have my M18 but rarely does it need to come out of its drawer. Just use a 4,5, or 6.0 batt on it and you’ll see what I mean .

[@paraman1249]

Do you know how to make a little bit of money building custom off road vehicles?......................................Start with a Lot!

[@Elvisnotpresley97]

I actually bought the OEM spark plugs for my brother, same engine V6, I got 6 and it costed me $15 lol Also I think NGK spark plugs you should not put anti seize

[@lucsurmon2623]

The différence between chain and timing belt ? The money you spend on replace the timing belt kit ! Almost 40% of the car builder's benefit come from parts and repairs...

[@leadpilled5567]

I have the same wheels on my magnetic grey F150. I did take a hole saw cut out the Rocktrix logo and epoxied in some custom ones a friend 3D printed. Raptor caps will also work

[@anarchy_of_dirt]

Timing chains break, tensioners break, it’s a lot easier to change a belt than a chain. Both of my roommates had their timing chains break before 170k miles. One was a Colorado, the other was a Cobalt.

[@ThatLJ20vGuy]

Do your self a favor and get a creeper

[@mikes4x4garage]

I have one I just never think to use it

[@JLeeChron]

Waiting for some work on this truck! Non interference so if the belt does go -not tragic Ive had 224k on an original and it was still going .. cracked and needed done tho- Also twin tip replacements (see the decal on the tb cover) 👍 Great work Mike

[@mikes4x4garage]

That’s good to know! I wish rock auto would’ve suggested the double tips then, I didn’t do any research prior haha

[@theblack5heep682]

Looking good, I’ve got the same wheels on my 3rd gen 4Runner love ‘em! Keep up the good content!

[@theblack5heep682]

Looking good, I’ve got the same wheels on my 3rd gen 4Runner love ‘em! Keep up the good content!

[@erice4611]

I put a Eaton Elocker in my front diff with a 2.5” liftand a new set of Baja Boss A/T

[@Aaron-uz8xt]

Looks so much better already

[@mikes4x4garage]

Thank you🫡

[@PiddlinWilson]

Your shocks are to long is what caused the bracket to crack the dont compress far enough

[@philliphansen7060]

I'm going to be doing my timing belt why do people line up the cam marks on the belt

[@ragingbullet3952]

I have a 2.7 which actually has a chain, so toyota did do that for some models.

[@meznova3741]

I have had the rock trix wheels on my 1st gen for almost a year now. there great!

[@asherward2618]

all of the new v6 tacomas are timing belts ... ugh

[@colemoto1888]

I laugh every time when I see a shot of harbor freight in the video 😂

[@bajamedic]

I am in Vacaville. Get the proper adapter and I have nitrogen and we can re charge those shocks.

[@Bob-ir4lr]

Please be pre runner fenders please be pre runner fenders 😮

[@bucketings]

The cut to harbor freight 😂 every job ive ever done

[@TheDifferentLevel]

It's always a good day when Mike uploads. Great work!

[@mikes4x4garage]

Thank you!

[@patrickkopek9613]

Love this channel keep up the good content.

[@JoseGonzales-cv5ly]

Where do you find theses truck

[@ann-mariekitson9554]

Another great video👍👍👍

[@snook863]

Like the videos Mike. Always good to see someone figure things out instead of taking it somewhere to get done. Solid entertainment too. Thanks for the vids!

[@Kench149]

lol did you say lamineer flow?

[@ToolsInAction4u]

Fun fact. The timing chains on the 4.0 jeep motor can fail and cause a mess. Ask me how I know😅. They are both non-interference motors though.

[@mikes4x4garage]

Oh I’m sure, anything can!

[@rubuk2996]

8:31 are those leafs bent?

[@drew.blanks]

Gettin work done Mike! Supercharger in the future??

[@upperleftnorthwest4278]

Please paint it army green

[@williambabak6034]

Niiiice! Love mikes vids.

[@quinnreller]

Yew ! Stoked to watch

[@BDoh]

If you’ve got a cheap body guy in the bay let me know. I’d like my 95 painted but don’t want to pay half what I paid for the truck ha

[@mikes4x4garage]

Haha yes I’m the cheap body guy unfortunately

[@Earth_wind_dan_fire]

mikes4x4garage challenge: How long can you work with a cowboy hat on

[@mikes4x4garage]

About 35 seconds 😂

[@tjthompson6172]

I can’t wait for this channel to become huge so you can quit your day job and post more. Keep it up man!

[@mikes4x4garage]

That would be something! I’ll keep grinding!

[@cullenwhite4005]

Hey man did you check ur rear diff breather for mud? It’s on the top of the diff if it gets clogged it’ll make ur rear diff leak

[@mikes4x4garage]

Yeah I did, it’s looking good. The new seal has stopped the leak 🤌🏻

[@saltymethods2637]

Great content. Keep it up!

[@PaulWall78]

you're the man!! i have an '04. love it! 5 speed. very fun and useful

[@mikes4x4garage]

Thanks Paul!

[@johndeere8594]

Why a belt and not a chain? So you can come back to the dealership and spend some money.

[@mikes4x4garage]

😂😂😂

[@luisangelino9573]

Love your content sold my 2000 taco and now I want one again because of you 😂

[@mikes4x4garage]

They are fun little trucks

[@Animation-my8ug]

Nice 🔥

[@Patrick156843478]

Good soup

[@dontmindme317]

Chet Faker making an appearance at 17:31, a man of culture I see

[@mikes4x4garage]

🤌🏻

[@CA11100]

Cheap cars have been some of my most expensive cars haha

[@mikes4x4garage]

Absolutely!

[@Alphebetize]

This video hurt my back.

[@mikes4x4garage]

Mine too

[@gregoryadame3945]

What is the difference between double tip sparkies vs single tip? What are the pros & cons for running double tip NKG spark plugs in the 3.4L 5vz? Interested to learn more!

[@nathankoroush7918]

double tip is from factory and is called for on the 3.4

[@mikes4x4garage]

Yeah I would be interested to see if it actually makes a difference. No issues yet…..

[@Miata_dood]

A shawty underpaid mechanic

[@mikes4x4garage]

Shoddy, but yes 😂

[@stay4theride]

Awesome

[@rustybucket6014]

Noice

[@riders315]

That 3.4L takes those dual spark plugs! But good job on the truck man! Love the videos!!

[@beans4gas]

What color painting the body? Toyota Orange with black bumpers and flares would be nice. Can't believe a bit of work and those dampeners look new.

[@ukeacreator93]

If you really wanted to do it the easy you could of just unbolted the brake lines and pull the axle shafts out about 2-3 inches to get the third member out . I’ve done it without fully removing them . Just a tip

[@mikes4x4garage]

Good to know

[@ukeacreator93]

@@mikes4x4garage I think you did the right thing by leaving the leaf packs alone . It is sitting pretty nice they way it is !

[@UrbanOpsOffRoad]

Dude wtf! You’re always finding the best tire deals in the state! Wtf! Lol that’s awesome!

[@Tactical_Pterodactyl_Knives]

I had a set of rocktrix wheels on my old jk and the wheels were the best part of the jeep. The fit and finish was awesome and they actually had great customer service when i went to order a 5th but they were out of stock on their site. They balanced well with my MT's, looked awesome, and like you mentioned were by far the cheapest thing available.

[@JasonDivock]

I’d like to thank this channel for reminding me to blast 90s jams while I’m working on my bikes.

[@christophergiano2222]

Can't wait to see this thing out on the trail

[@mikes4x4garage]

😎😎😎

[@Breezy_alee]

Imy

[@ramirocantu307]

Great video to watch, just like back in the day watching truckin' on the weekends! Making a complex task so easy and simple to do is probably the best thing to watch on KZbin! Comes in handy for those who try and have troubleshooting similar tasks of there own with this model and make so thank you on behalf of those who need guidance! Great sound effects and nice cowboy hat! Lol keep these cool videos coming partner! Definitely enjoying the content! 💯🏁

[@hawaiian4934]

Supercharge it especially since you got a 3.4 engine the way it sounds with the supercharge is the best 💯

[@jacobjohns6047]

I can smell that diff from here

[@mikes4x4garage]

Yummy diff fluid

[@UrbanOpsOffRoad]

Don’t forget to like before you start asking if you can fit 33”s with stock suspension. Keep up the good work bro!

[@winter_ritual]

Fantastic job, man. Love watching your videos. Looking forward to the next one.

[@jasonjavelin]

So hype to see you upload this, been looking forward to it. Had the 3.4 in my 3rd Gen 4Runner and loved it. Also those wheels and tires are fucking SICK

[@user-np4fe2hq7b]

Would like to see a solid axle tacoma

[@mikes4x4garage]

Me too

[@TheExtra40414]

Your intro statement is exactly why im here for every video. LOL keep up the great entertaining videos.

[@williamtiernan1105]

Love it! Keep ‘em coming!

[@mikes4x4garage]

Thank you!

[@eric3301]

Great video dude, decided to get the same wheels on mine after this video. Just finished up putting new suspension on with a 3 inch lift and they will be the cherry on top. The money pit is deep over here.

[@ryanthompson2693]

You can discount the brake line mounts and pull the axles out just enough to pull the 3rd member.

[@daniellablee6682]

Perfecto el trabajo,no seria conveniente cambiar las correas exteriores o auxilisres? Excelente video ,saludos👏👏👏👏👍🍻

[@johnbailey1305]

Good work Mike. Lots accomplished!

[@rodthecollegeguy]

Love the Tacoma content! I’ve learned so much from you and appreciate the hard work 👊

[@SILVERGHOST-qu5cn]

Really enjoying this build I drive a 2004 love it 🤘

[@mandexter956]

No Brewskies on this one? lol... The truck is looking good!!

[@project4funner]

It’s wild that someone put kings on that beat up of a truck

[@JB50713]

Wicked repairs so far! Shocks came out beautiful.

[@sinister184]

I do like watching those kinds of videos 😉 Ready for body work!

[@jonaswilf1778]

I always love your vids man! Keep up the great work

[@justinb3007]

Thanks bro i love the 20min beer break you give me 🍻

[@robertthorgudmarsson4898]

fantastic video as always Mike, you have a good thing going here