Some of the best work I’ve seen on KZbin! Enjoy every video on these builds.
@austinniemela3 жыл бұрын
Wow, thanks!
@LOYLSkipSh0t3 жыл бұрын
SRQ fab makes extended brake lines for front and rear (i think three inches longer front) that i have in my 3g4r and they’re very good quality!
@125sm33 жыл бұрын
As a helpful hint, remove bleed nipple and use compressed air line to blow out/remove the pistons. Just hold a rag against the pistons to catch them lol.
@ryanmacs24863 жыл бұрын
I hope you know that you are putting out the best content. I hope you keep giving us more for years and years to come. Keep living the Toyota Truck Dream.
@austinniemela3 жыл бұрын
Thanks man!! Glad you enjoy!
@WeekendWrenchTurner3 жыл бұрын
Awesome stuff👍👍 This is the best upgrade I've done on the 4Runner along with converting the rear to discs. Keep up the great content🍺🍺
@670fastcrf3 жыл бұрын
I have never disassembled calipers down that far!! I always thought they were filled with magic brake voodoo.. ha ha awesome content and information as always Austin! Keep on keepin' on!!!
@3rdgenbestgen213 жыл бұрын
😂
@stevanrose7439 Жыл бұрын
Ha ha magic brake voodoo. Because of these videos I’m gonna rebuild my calipers.
@alexei92163 жыл бұрын
It gets just better and better, that's awesome
@Jaws6773 жыл бұрын
A little of conpressed air would have popped those pistons out without any effort or risk of damaging the piston with screwdrivers and pliers
@robertboyer54983 жыл бұрын
Was just getting on here to say the same thing. 😂
@garethl.21233 жыл бұрын
I always leave a block of wood on the middle to prevent one piston from rocketing out before the others release.
@motorhead-kf3nc3 жыл бұрын
a 4runner rear disk setup would be pretty sweet too 👌
@brianross40573 жыл бұрын
This is an easy kit, The bracket is From Australia but the rest of the parts you can get from Rockauto. www.designfab.com.au/buying/how-to/toyota-hilux-rear-disc-brake-conversion/
@thomasmitchell69213 жыл бұрын
Love your work. Please consider painting the bed cover in black! The white just seems out of place
@richardwilkinson35943 жыл бұрын
You put the clips for the braided lines on backwards.
@cotisado163 жыл бұрын
Yup, thats why they have a little bit of play.
@austinniemela3 жыл бұрын
For factory lines yes, with these lines not exactly working with the mounts I had to improvise
@たぁ紺緋3 жыл бұрын
Brake hose clip installation upside down
@scottkailey13 жыл бұрын
I can't believe how clean the frame on that truck is!!
@genxiong26952 жыл бұрын
Not the rear end 🤣I'm from Cali. I have a 2000 4runner 3rd gen and the only rust is old mud.
@juanjosewtf78253 жыл бұрын
Beautiful tacoma project, always waiting for the next video 🔧⚙️
@stevanrose7439 Жыл бұрын
Is the new bigger calipers compatible with the stock wheels 🛞.
@luvkountry Жыл бұрын
What type of masking tape is used that can withstand the 400 degrees heat? Also is there any danger of the rotors becoming warped from the heat? Thank you for sharing your talent.
@maddgoatee97083 жыл бұрын
Killer brake up grade. Can't wait to see what's next.
@LuisRamirez-wr4of3 жыл бұрын
Its hard to make things with one hand, great video 😀
@MonkeyWithAWrench3 жыл бұрын
Powdercoat seems like a better way to go over a rattle can. How hard is it to get a good looking part compared to a rattle can?
@danielbyars63 жыл бұрын
Would you reccomend this on all tacoma's? Ive had issues with my brakes for a while...
@austinniemela3 жыл бұрын
Yes this is a great upgrade for the 1st gen tacoma
@Wyo_Roadhunter2 жыл бұрын
Hey I was wondering if you could post the part numbers for the hard brake lines and the brackets. I was going to buy the big brake kit but looks like I can buy everything separate for quite a bit cheaper. Thanks!
@levimonsen10063 жыл бұрын
There’s a guy on the forums that made a rear disc conversion kit using Shelby rotors
@BigMike9517 ай бұрын
What do you do with rear drum brakes ? Stick with oem?
@1808lcp13 жыл бұрын
Do you need to upgrade the brake booster for this mod?
@andreykonovalov73063 жыл бұрын
you can pull out the pistons by air pressure ;)
@bigmackstruckstop92133 жыл бұрын
Educational and learning about late model toyota tacoma trucks I like
@yendortgone3 жыл бұрын
Tacoma calibers are notorious for premature failure i.e. one or two pistons seizing. Does this swap fix that?
@jacobshulikov79933 жыл бұрын
I work with UPS at PDX and we get entire airplanes full of Prismatic Powders and boy are they heavy
@miguelromero84832 жыл бұрын
Hey where can I go buy this kit for my 96 tacoma 4x4 thanks
@johnpyle80273 жыл бұрын
With the detail you're putting under the truck in places most won't see, do you have any plans for the paint on the truck? Man you put that second caliper together way faster! ;o)
@bendaff96183 жыл бұрын
Could I do this to a mk5 (2004) hilux?
@Jrerecich3 жыл бұрын
Do you have a part number for the calipers? I’m not a huge fan of the powder coated red calipers you linked in the description.
@MrQdawgs3 жыл бұрын
Everything you do is super clean!
@arthurdent59033 жыл бұрын
Have you tried the cerakote products ? They work great on rifle parts and are very durable.
@austinniemela3 жыл бұрын
Yes I have! It’s a very good product!
@abpsd733 жыл бұрын
Too funny, I saw my comment a couple times as you were scrolling back and forth.
@politicalcheddar686 Жыл бұрын
Will the 13WL brake calipers work?
@koybuscho588014 күн бұрын
Is there a reason to not use cericote on brake calipers?
@bmxtaz2 жыл бұрын
When you reassembled the calipers, What did you tourqe the bolts to on the caliper halfs?
@austinniemela2 жыл бұрын
I couldn't find a spec, I just went tight plus a smidge haha
@thescottishhammer75703 жыл бұрын
Loving these videos. Quick question, what model of Kobalt air compressor are you using and do you like it?
@austinniemela3 жыл бұрын
It’s a 60 gallon. I have had it for 5-6 years and hasn’t let me down yet!
@thescottishhammer75703 жыл бұрын
@@austinniemela Right on. Thanks!!!!
@douglasthompson27402 жыл бұрын
Rats! I was all ready for you to be doing a drum to disc conversion on the rear axle. Updates on how the Kei truck is plowing??
@kinanramroop63653 жыл бұрын
Good day, Awesome videos!! Will this work on a toyota 4x4 pickup?
@cauchalookn2 жыл бұрын
Will these be a good upgrade the gen 5 4runner as well?
@its_phillkuz3 жыл бұрын
Lovin the progress bro, good work. What do you do for a living?
@shaikarshad13953 жыл бұрын
Nice job bro show with name replacement car parts details work on doing u r work
@James-of-all3 жыл бұрын
Another fantastic mod, excellent work sir!
@jeffreygonzalez85442 жыл бұрын
Do you know if this will work for the 2wd 5 lug version mine are trash
@UteTrac3 жыл бұрын
What! No swap for the back brakes? well more like dog food bowle's I for the life of me don't know why Toyota puts em on the taco but no other Toyota truck?
@johncourtneyscott27572 жыл бұрын
They look nice
@6719673 жыл бұрын
Congrats on the sponsorship!
@austinniemela3 жыл бұрын
Thank you!
@jimcatanzaro78082 жыл бұрын
Beautiful kit I wish I wasn’t broke
@273VIPER Жыл бұрын
That’s attention to details 👌🏾
@crlsvaldovinos2 жыл бұрын
Do they make this kit for a gen 2 taco. If they do. Do you have a link?
@bigchrisb592 жыл бұрын
Will this work on a 2022 tacoma by chance?
@juanv24662 жыл бұрын
Will this work on a 3rd gen Tacoma
@scottkailey13 жыл бұрын
Damit man you make me want to find a new first-gen ....mine is a rusted-out shit box!!
@Jonathan-gz6tu2 жыл бұрын
Are those brand new oem calipers?
@austinniemela2 жыл бұрын
No they are aftermarket!
@oONeMesiS0o2 жыл бұрын
how long to you degas them?
@dtemplman78163 жыл бұрын
Does the 13WL work on a second gen 4unner
@clk27us9 ай бұрын
What type of media do you use in your sand blaster?
@austinniemela9 ай бұрын
80 grit aluminum oxide
@kenny-d39443 жыл бұрын
Hi I wanna do the upgrade to my 96 Toyota Tacoma but my Mechanics shop manager told me that the calipers are to big and I will have to get bigger rims other then the stock rims..??? Is this true ??
@kikezurek343 ай бұрын
What the rotors brand from Amazon
@geomatiq2 жыл бұрын
whats that green transparent tape called?
@bungbentrip3 жыл бұрын
Very nice job dude...i love it👍👍👍👌
@binhamda3 жыл бұрын
So wear that masking tape not melt in oven under 400 temperature!!?
@acescape883 жыл бұрын
Did you paint the frame? If so what did you use?
@austinniemela3 жыл бұрын
Yes! I use napa chassis black or Eastwood chassis paint
@rampagedingo3 жыл бұрын
Congrats on the 100k subs!!!
@austinniemela3 жыл бұрын
Thanks!
@jimcatanzaro78082 жыл бұрын
The breaks are worth more then the truck
@Anthxoy3 жыл бұрын
man I really do enjoy your videos wow
@kikezurek343 ай бұрын
And what toyoyota parts are so I can go buy them at toyota dealer
@flexapex98013 жыл бұрын
Will this fit 3rd gen 4RUNNER?
@austinniemela3 жыл бұрын
Yes it will!
@nathankoroush79183 жыл бұрын
you will be able to sell this truck for around 30grand when your done, easy.
@donkeyrider3 жыл бұрын
I think I would go for 45k considering and see where it lands but yea 30k easy
@nathankoroush79183 жыл бұрын
@@donkeyrider Today's market, and 1st gen 4 door, you could be right.
@AatAdam3 жыл бұрын
The clips are backwards
@joshwheat3602 жыл бұрын
Good stuff right there
@geomatiq2 жыл бұрын
why doesnt 20:25 he powder coat the bolts?
@leopoldodiaz50783 жыл бұрын
Nice work
@inferno17703 жыл бұрын
Ahh my brand of bulbs aux beam
@triedandtrue1820 Жыл бұрын
Use original stock brakes, save some dough $
@austinniemela Жыл бұрын
Well that’s no fun!
@diyjeff18383 жыл бұрын
Love it!
@awhipps3 жыл бұрын
I can’t believe you stopped on my name for the 9007’s. When I watched the previous video I thought you had said 9003. I love my T100, but it seems like there’s nothing you can do with the headlights.