THE CHEAPEST 10 SEC HONDA IS READY TO RUN EP.4

[@dropinbiking92]

Been following this series. I love the more "realistic" builds. Not everybody has thousands to throw at a machine shop, engine builders, and fabricators. Looks pretty promising. I'm expecting low 11's, traction will be an issue. I do expect it to run pretty good if you don't get too greedy on the tune. Good luck boys!

[@LoserSnoozer]

They do have drag tyres on the front so it's the rear traction is their problem really

[@dropinbiking92]

Rear traction? It's a FWD, doesn't matter what's on the rear. It takes a lot of fine tuning to get a FWD to 60 foot well. It's going to want to spin, bog, or wheel hop.

[@LoserSnoozer]

So what it's FWD? Just since it's FWD, you think it won't spin out from the rear due to less grip? But I think they got wheel spin and hop and such covered or reduced well enough it shouldn't cause anything major, but there's so much less grip in the rear it could spin out on the track if anything that can make the rear loose

[@dropinbiking92]

Do you not notice every competition FWD car runs little skinny tires in the rear? They're useless, they just need to roll.

[@dropinbiking92]

You won't know if a car is going to spin, bog or hop until you're at the track setting up launch control and tire pressure. It always takes a handful of passes to dial in a car to get out of the hole well.

[@pipbuster]

Bug says "I eat RAID for breakfast bro!!!"

[@95TurboSol]

He's the Chuck Norris of the roach world

[@DevDoesAThing]

bug said oh word you gonna bring fire? starts coming for the camera man xD

[@markbutterfield5559]

Or more to the point, "I use RAID as mouthwash".

[@Michael-fl2hf]

Yes you should add in the cost of the Lexan; it will reflect the "cost if you did this at home" I think y'all are going for more accurately. Especially since the freebie was a result of your exposure on YT. Perhaps add it at the used/scrap/remnant value, instead of retail since anyone doing a bargain budget build would try to scrounge what they could first. Fantastic series you're doing. Thanks for sharing it with us! *edit*: I do pest control for a living. From now on, every time I spray a bug, I am gonna yell "WAZSSUP CUZ?!?!!" when I do it' idgaf what the clients think.

[@TheSpyChecker]

Dude, watch the video. It's not Lexan, it's plexi. That entire sheet is worth around $3. Maybe $4 if you're generous....

[@jwilliams703]

safety never counts in the budget bro. you good. Great job so far. cant wait to see some real good pulls in it.

[@sohctony]

J, Williams totally was gonna post otherwise but you made absolute sense

[@piercetonmazell9402]

Lemons rules

[@jwilliams703]

Paintball Bros. toltoly bro.

[@matth6762]

Why do i feel like this build is more interesting than clean builds? am i alone here? lol

[@Neozev]

It reminds me of the old Haggard Garage days with the shitty Protege, but this is more rad

[@stevensandoval729]

Right here with u brother

[@blazenemlgment]

Matt H it's because this is what most people do in real life lol...

[@josevinicius.z9977]

No bro, as you saw... You are not just

[@ChrisDavis-wi4yn]

I agree

[@professionalprofessor2719]

I mean you're borrowing wheels for the track too... Why not use the sub freebie?

[@troublesome3607]

Good luck! I'm glad to see a build that is honest in its numbers and goals. Seen too many BS 1000hp plus videos advertised. Keep getting it

[@Brock_Landers]

Mike brother, I'm sure that you know better than me, because I am not any sort of a tuner, and I understand that you don't want it to blow up (hence the reason why you want it to run rich), but under full boost you want that engine to stay around 12.5 air fuel ratio. I have a 500 whp LSVTEC Civic coupe and even though my engine is forged and bored, I have found that these Honda engines run the best around the 12.5 mark under full boost. That will keep it happy and cool. Where you're really going to see the best reaction from that engine is going to be adjusting the timing. That is also going to be nerve wracking because that is where some tuners get a little risky and end up melting a cast piston like what's in that B20. I get that the whole point of this project is to run 10s as cheap as possible, but if it were me I would've at least done some cheap eBay rods and pistons. The stock rods should hold 15 psi (mine did and put out 412 whp on an otherwise stock B18B1 non-VTEC with supporting mods), but those pistons might not be capable of getting you to that 10 second time slip. The axles as well, they're stock axles. My boy ran a 10.9 in his eBay internal B20VTEC EK hatch and he had to use slicks, and around 21 psi to get it there and he ended up chewing up the diff in his transmission. He also broke a couple axles along the way. All I'm trying to say is that it is much more difficult than you think and way more labor intensive than just slapping a stock engine in a car, throwing a turbo kit on it, and rolling out (as far as a Honda goes that is). That being said, I wish you the best and I hope that you prove me wrong and you get that 10 second slip that you've been working for. I don't want anything to happen to it.

[@cerealbobkiller]

I don't know how I got here but I liked and subbed. This was more fun than the last decade of tuning/rebuilding car show on tv. I wish you get that 10 seconds run

[@GuAp_JZ]

Been following this build since the beginning. You guys made some very quick progress. Love the channel and keep up the good work.

[@andrewdipaola8638]

You guys should upload more

[@LoserSnoozer]

They have to wait for both part deliveries and to assemble the car, so if it was daily updates, there wouldn't be much new

[@jakobnordin]

You should have stickers made for this car! The stickers should be styled like NOS-stickers but instead saying POS (piece of shit). 😂

[@Varnts]

YES PLEASE

[@Varnts]

Here I actually made one really quick i.imgur.com/0QotXB5.jpg

[@nugget1104]

Would buy.

[@jtmalone4832]

would buy as well

[@mannen12233]

Varnts should say piece of shit under POS, other than that it would look great

[@tedbear631]

6:50 For sure install it if anything for safety lol just don't forget to add it in the final price

[@themustangbrothers]

I like the whole budget build . Awesome. My project has been a budget build and slowly coming along. Get to do a final dyno n tune in couple weeks. Hope to get it down a track. Cant wait to see what your car runs

[@Herb.]

"Some Water Wetter" ... "Distilled Water, But-" *Pours in spring water* "Why Not?" ... "FUCKIT A LIL BEER WILL HELP!" *pours entire beer* Haha! God dude I lost it.

[@Divine_R]

I burst out laughing at that part. So unexpected lmao

[@chawizaud]

Love watching the videos by the way! They bring back all the memories I made in my two different del Sols I had! Prelude driver now! Still dream of that k20 build like I did with my Sol's

[@C4CH3S]

Put a top on it and build some kind of diffuser. Aero is more important than you think.

[@jonnyrocker7919]

I'm feelin it too! ... guys that's amazing, cant wait for the next PINK WIDOW vid

[@Oracheuety]

Good work boys, been watchin this one from the jump!! Cheap ass build that’s gonna shit on everything, I’m all bout that life!!

[@HunterTuned]

Let me know if I can help out with your build in any way! Hit me up if you guys need help tuning etc

[@foshizalmynizzal3862]

I noticed the Turbo takes a while to spool up .. What size is it?

[@TheSkatersoldier]

i plan on buying a €500 civic and put an ebay kit on it. do i also need to replace clutch/injectors and tune it? need a cheap car for a year. turbo kit seems fun but dont want to replace allot

[@BiGMiAMiTV]

Let's get it yesssssssss here we go pink widowed back at it again shout out to Mike's team.... Let's go. Team Rico suave!!!!!

[@kelevra558]

The fact you guys just dumped beer in there made me subscribe. I’m a Reno guy, Nevadans gotta stick together

[@josebatista759]

Nice!!... I understand its a bugdet build, but giving it a good wash shouldn't be a bad thing

[@davidv7616]

I love your vids guys look forward to every new one. Brings back memories of my younger days building cars

[@hondad-series9265]

Love the car I'm actually working on my Honda del Sol now making videos think of you guys you motivated me

[@streethonda95]

Freebies are welcome to me! That’s cool it’s like the channels car now! More people should give parts and make this beast amazing!

[@BboyDaquack]

Man this underrated ass channel right here

[@chikogota]

next time you need to take out a windshield, just cut a thorttle cable, pass one tip and cut it like it was butter, no need for fire and glass pieces ( this is the way you take out a windshield without breaking ) :D Good build

[@chaosmachinest9930]

In florida if you have a crack in the front windshield they will replace it for free if you have insurance in the state of florida. So why not freebe?

[@dri.productions]

I have a 93 sol myself not many build them i personally love the car do it big guys you have my support 💯💯💯 ima keep watching these sol vids quest for 9s ????

[@htconex19062012]

great job guys, love what you have done!

[@DaOnE51T]

Can’t wait for the track day! Hope she runs the number.

[@dannyanderson6405]

If you guys ever need a hand around the shop I have a C in C experience as well as backyard mechanic for over 15 years

[@VideoMaster5094]

Yo does anyone think they could help me out, I have a 1996 Stratus, and the PCM/ASD fuse keeps blowing when you crank the engine, it only happens with the asd relay in. But it needs that to run, I have tried everything I can think of. Any help would be greatly appreciated.

[@smithkid1996]

saw this car run at LVMS and thought "thank god, a honda thats finally fast!!" and didnt think much more of it. 2 days later it shows up on suggested videos. lol

[@markbutterfield5559]

I do think that it should be added just for the idea of knowing how much it would normally cost to do a cheap(est) build for the rest of us.

[@chawizaud]

Just count the lexan as a buddy deal freebie! What build doesn't have at least one of those or something close to it!

[@dominicrobertson6002]

You should put a clear sticker thing over the plexi glass so it doesn't scratch

[@alexeslinger9300]

You guys are gonna put some bracing on the windshield, right?

[@aoucelloutus3573]

This is so awesome, subbed because of this build.

[@driveVeight]

If you had a cage in the car.. You could go with the target top off.. An if I remember correctly 11.50 is the fastest it can run va Tec rules.. but you can always do a one an done full glory pass to hit your 10's you're after. But might not let you run again after that quick of a pass with no cage.

[@Dislob]

Mike Green thats their goal. They just wanna hit 10s

[@blake9414]

The only thing is, if anything goes wrong and they need to make a 2nd pass because they didnt hit 10s. They might not be able to if their trap speed is high. The track will sometimes kick you if your time is slow but they know the speed is high.

[@edmichaelmonares5161]

new sub here! i didn't know how i got to your channel. nice series!

[@DeBoswachter]

Lexan for sure! Every true car Guy building a budget car Will get some parts for free . Sweet @$$ build i love it

[@mitchellll86]

I have been waiting for your upload!!! I check everyday no shit hahahaha. Cant wait to see it run!

[@aubreykraeker4579]

Love the car! Super pumped to see it on the track! I see this car pissing off a lot of v8's lmao :D maybe I should lend you guys my 2013 dodge dart to do 😂😂😂 keep up the good work guys!

[@MrGmixx]

What turbo you guys running?

[@bseriesonlyhondasintegras1883]

Just do both.........say this is what we paid total out of pocket & this is how much it would cost if we paid for everything........that way if anyone wanted to copy the project they will no the around about total cost

[@garrettchappell3786]

Even if you get it for free, add everything up so we know how much you spent, that way we know how much it might cost us to do this. Enjoying this so far. Keep it up vato lol.

[@stbn100san00]

Are you guys located in Las Vegas ? If so y’all taking any apprentices or part timers

[@gearbaby279]

I think it should be added because not everyone can get the hand-downs that u guys were able to get lol.

[@arcine142]

Could you show two sets of totals, one being the current money spent without counting freebees and stuff like that and the second showing the cost of everything including the free stuff

[@adamsondergaard8159]

Little whiper snapper, must be yhe beer in thw coolant lol. Cant wait to see it on the track

[@notone4029]

Love this build series!!

[@SweetChariotOfFire]

SEND IT!!! STOKED TO SEE WHAT HAPPENS!!!

[@Lerma23]

i was gonna go to midnight mayhem too but decided not too. i would've seen you guys lol

[@6thgearinformant384]

The way it took off at 10:02 😍

[@12thhouseent.2]

Y’all should put a support bar going from top to bottom through the middle...

[@alonzo5.040]

How can I get y’all tune? 😦

[@BasketballAve]

Dang those are bigger then the ones in Florida!

[@barneyruckus]

Wow. Good work, gentlemen!

[@shawnprince7080]

midnight mayhem this friday?? :] i'd love to go out there and watch :D

[@Peachan123]

Since you're running a proper harness, are you going to cage it too? That thing goes on its "roof," you'll probably not survive it.

[@interestingvidz1345]

At the end show the total for everything spent only and another price which shows how much it would have been if you had bought them free parts

[@donovanjack1259]

So going to midnight Mayhem to see you guys run.

[@caduceus33]

Just make two lists: 1) What you paid out of pocket, and 2) the value of the freebies

[@MandeepSingh-jl3nj]

That turbo sound SHWORD BOI. Damn

[@driveVeight]

I think any parts or pieces that you acquire as (freebies) count as free in build cuz anyone trying to build one I'm sure would come acrossed couple deals or freebies them selves..

[@Nocrii]

Do you have any social medias like twitter/fb/insta where you post updates on that build? I've found your insta/twitter, but there's nothin about pink widow :/

[@Uniqueillusionz]

New to your channel. Love the vids man. Putting on for us in Sin City. Yee!

[@RemedyTalon]

It needs E85,

[@Brock_Landers]

Evil GST God does this make me miss my 4g63t swapped Dodge Colt hatch...or my 90 Talon Tsi AWD.

[@RemedyTalon]

I used to have a 88' 4dr civic with a B16, such a fun little car and I used to hardcore hustle with it, kept it looking bone stock even down to the stamp steel 13" rims. I miss that car.

[@Rarien1337]

SHIT why does this have to be the most up-to-date video? I wanna see this shit go lol

[@adamfletcher8338]

Why is there 2 pipes for

[@dabfiends8548]

No motor work??? Stock block stock head??

[@Mr401MoUa]

Not hating but with out the correct tune kaaaaabooooommmmmm!!!! 10s is pretty hard to shoot for my guess is 12s or 11s at best. Goodluck guys...

[@tedbear631]

3:20 dat fireball XD

[@tape4684]

Holy sh*t what the hell have I been doing all day. I’ve been waiting for this damn vid for the longest timeeeeeeeede lesssgooooo 10.99 here we comeeee

[@barneyruckus]

Re: adding cost of seat belts and windshield... it’s not going to inflate the cost of the build that much and it’s needed for safety purposes.

[@chippi3137]

My nigga told that roach “wassup cuz”😂

[@joshuapenn7112]

Thats a good intake manifold i had one on my b16a.

[@RitoFab]

I’d say the lexan is an optional part of the build so don’t count it on the budget, but damn that fridge need some water in it as you were just complaining about the heat lol

[@MrSamcro1976]

You guys are funny as enjoy for videos all the way over in Brisbane Australia

[@penguinpie5056]

you gotta do a paint can paint job on this thing. at least give it a pink spiderman spider on the hood.

[@rowindcbnell3631]

Wow!!!!! I love this since the beginning

[@drsvenoo]

why you didn't took a cast manifold

[@Troy_Audi0]

I would say put it the freebies in a category with a retail cost,

[@luccavit]

Crazy shit!!! Good work guys⚡

[@dominicrobertson6002]

Do 2 totals one with free bees one with the Avarage price of what it would cost

[@alimehrozi2828]

That's a high 11 second car guaranteed

[@12thhouseent.2]

One more thing when you guys done with that set me send me that joint...

[@watchingitallhere]

TENS. Pink Widow baby !!

[@damianhughes7034]

Can u guys tell me how u wired up that engine after swaping out the b15

[@LoserSnoozer]

It's basically the same as the stock engine, the only difference is that engine has VTEC compared to the one they swapped, but if the stock engine had VTEC, they wouldn't have swapped

[@damianhughes7034]

Drii_ft ok i see so if u have a single cam vtec and u can just add a good turbo and make power

[@LoserSnoozer]

not exactly, you need to add a tune and make sure the engine can handle it

[@Brock_Landers]

When I pulled the D15B VTEC out of my 97 Civic coupe I bought a mount kit, a 99-00 rear mount (t-bracket as it's called), both half shafts, the intermediate shaft that bolts to the back of the block, bought a B series shift linkage, dropped the engine in, plugged the harness into everything, put my stock electronic vehicle speed sensor into the transmission, socketed and chipped a P28 ecu (92-95 Civic EX/Si), put a basemap chip in it that I bought from Xenocron, put the turbo kit on, and fired it up. Did it all myself in my mud and gravel driveway. With the EG Civics, you can drop the engine in and everything will plug into it as it did with the single cam, but if it has a VTEC head you'll have to run the wires for the VTEC solenoid to the ECU if your harness doesn't already have the two VTEC plugs. Afaik, all 1992 models come with the VTEC wiring in the harness, the rest dont unless they came from the factory with a D16Z6 (92-95 EX/Si). Hope this helps brother.

[@juggnautbitch]

obd1 hondas are easy, you need the harness that comes with the engine then just plug it into the shock tower connectors where the old engine harness was.

[@coltonsalmons7321]

@diymike did you happen to live in Springfield Missouri a handful of years ago? Just wondering if you were the guy I almost bought an ef hatch from and then you kept it and totally built it in an apartment parking lot. I'm dying to know if you're the same guy.

[@Brock_Landers]

Colton Salmons My ex lives there...lmao

[@diymike]

kzbin.info/www/bejne/m2LKgJiFpLR2qqs&frags=pl%2Cwn

[@coltonsalmons7321]

Diymike that is crazy! It is you! That car was amazing. I think I was possibly gonna trade you a white eg coupe for that car when it was red with the D series. Mike Lapp and I I think went together to your apartment and drove it. I ended up trading for my crx that I basically built from the ground up just like you did and fully restored it. I still have mine though. It's been 12 years with this one. Sorry to hear the sad ending to the nicest ef hatch I've ever seen in person. If you're one Instagram you can check out my car @rexb16a. What a small world. Been following your channel and had no idea it was you!

[@5thgenprelude703]

That's so weird that's where I am from as well, it's not a bad place to live but can be boring at times.

[@zerocool328]

Parts list?

[@air.mdz1692]

Man I would go and watch it but I need to work on my own integra

[@iKennethzki]

I'm so hype man. I can't wait to see the next upload

[@The3nergyStar]

big shot! :D nice project

[@diegovargas3744]

Be safe you guys a free bee is great.