THE CRV BUILD PART 2

[@thematrixerror]

Greetings, what arrangements were to be made, or was it just to put the expansions and that's it? I ask you why I bought the 3 "

[@txUSMCdallas]

Can’t wait to get started on my CRV. Gonna paint it the Toyota charcoal grey and have the spare cover say “FauxRunner” in TRD font lol

[@chayingvang4797]

It looks good, what would’ve happened if you used 3inch spacers on the front too? Would it have affected anything?

[@joeaverage4029]

Nice 👍🏼 we’re you get the side steps??

[@Throne243]

Wheel and tire size please, and I like the fact that you kept the the way it was without removing the plastic strip around the tire frame.

[@Freshkicksvic]

Dre Junior thanks I’m gonna post another video on installing the lift on my brother crv this is my specs on it I’m on Aerogenics spacers 3” in the back and 1.5 in the front on and 15” wheels on some grabbers 215/75/15

[@fahimomar6449]

@@Freshkicksvic thx you for giving the wheels specs but I want to know does it scrape bad

[@emelya1977]

Ушастые сайлентблоки сразу умрут если их не выбить и не повернуть_ получилось красиво👍👍👍

[@justindark270]

Nice stuff man I got me a 2003 crv last Monday in the shop now though somebody stole my Cadillac converter on Friday😶 cant wait to get it fixed and get it back

[@bludragontruck9743]

LOL 😆 I see you guys around the town.

[@georgerosado5194]

Do u have any videos on the ABS SYSTEMS? They activate on their own & I also hear a SPRING sound aswell . any advice?

[@doortopgamingroblox6522]

how many inches of lift you put in there

[@bradbaker9367]

Is the rear sway bar still hooked up being lifed?

[@efjay5042]

What size rims and tires you running

[@beautifullyimperfect2441]

I love your crv!! I’m looking to raise mine up but not sure how much I should raise it. How many inches did you raise yours?

[@ilonggoeasyrider2178]

Best crv ever built.

[@Freshkicksvic]

gaming vampire aby thank you means a lot

[@nr9727]

Where did you purchase your spacers ? and what is the height for the front and the ones in the rear. Thanks

[@Freshkicksvic]

N R I bought them at aerogenics.com the front ones is 1.5 inches and the rear is 3 inches

[@travismcgreck1601]

Do your upper control arms hit your springs as well?

[@Freshkicksvic]

Travis McGreck so far not at all it rides good after I did the aliment

[@scoobydoezit]

Is that crash bar mad for the CRV or is it for another and you make it work??

[@Freshkicksvic]

Daniel Robles it’s made for the crv they have them on line it comes with the brackets and stuff

[@tonyrobles5499]

How's it holding up?

[@killerklown6905]

I love when ppl do this kind of stuff its exciting to see how they turn out!

[@Freshkicksvic]

KillerKlown690 thank you

[@felixnguyen6453]

Do you think its possible to run that tire set up without being lifted?

[@Freshkicksvic]

Felix Nguyen you can but it’s gonna rub ones the tire sinks in or when u go up drive ways or bumps

[@Iseekoutthetruth]

Nice Looking CRV, I just purchase 2 CRV's myself a 1997 and a 2000.

[@jadeedwards9732]

Yo man I am lifting my v right now and I can’t for the life of me figure out how to get the front spacers on, how did you get yours on?

[@Freshkicksvic]

Jolly Jonathon what’s the problem r they not going in where the bolts go ?

[@rusty-ole-boomstick1268]

Question. Does the steering get mods also? Thanks in advance.

[@Freshkicksvic]

Mike Aragon like after you lift it it’s gonna mess with the aliment so u have to get a aliment when u lift it

[@rusty-ole-boomstick1268]

Thanks for the information, peace out.

[@joshuathao4570]

What is wheel and tire size? That fitment looks great.

[@Freshkicksvic]

Joshua Thao I’m on Aerogenics spacers 3” in the back and 1.5 in the front on and 15” wheels on some grabbers 215/75/15

[@RobertJToledo]

I love it bro! I have the same one!

[@Fraggle190]

sweet! where did you purchase the lift kit from?

[@Freshkicksvic]

Fraggle190 I got the lift from aerogenics.com

[@Fraggle190]

ok thanks

[@prodriveawayman6943]

Good video. I have to lift one of my CRV's because I use it to carry my tools. Im going to make my own stuff.

[@driftblock3504]

Nice build, I see it everyday at work keep it up G 👍🏼

[@Freshkicksvic]

Driftblock350 thank you 🙏🏾

[@christian95421]

Nice clean look of the Heep, good choice on the first song: GT ✌

[@Дмитрий-ш7й1ж]

Cool lift!

[@AttainingExcellence1]

I wish you could give us the side of tire and ring combination

[@sonnynick1]

How many inch is that lift? I have a 2005 that I want to do the same thing to.

[@805willy]

Its a 1.5 in the front and 3" in the back from aerogenics

[@camposjrmartin]

How much did you buy the crv for been wanting one for a min and what year is it

[@Freshkicksvic]

Deimos663 I got for 2k and it’s a 1999 it’s a gas saver too

[@camposjrmartin]

That's wats up been looking at all this different builds for it can't wait to get my hands dirty and start wrenching at it nice content brother. Cheers from El Paso Texas

[@Freshkicksvic]

Thanks means a lot 🙏🏽

[@cesarmonzon6591]

Donde venden esos

[@neodemon283]

Nice lift build brotha. I'm going to so the samething

[@Freshkicksvic]

neodemon283 thank you means a lot 🙏🏽

[@AHScrewedu]

I’ve always wondered how crvs were lifted I’m wanting to get one as a daily

[@Freshkicksvic]

AHScrewedu there really good on gas I daily mine everyday to work i like so far

[@youngfeezy7969]

I just picked up a 2000 lx. It's got the sun roof too. 5 speed awd. Bout to start working on it this weekend

[@DavidGarate55]

I've got a 2000 EX, not lifted but I like it way better than my 2013 Ford Focus. It's not a s good on gas but I like to drive it more. They are awesome in the snow and pretty much bullet proof if you take care of it. Mine has 270,000 miles.

[@loganmoua9863]

You guy locate in Fresno ca or what part of ca

[@Freshkicksvic]

Nou Vang located in Modesto c.a area

[@loganmoua9863]

S2k_Vic me and my uncles we all use to roll in lifted Crv too

[@Freshkicksvic]

Nou Vang oh for real that’s tight

[@ueform-sf3eb]

Nice work!!! I have a green CR V 1999

[@Freshkicksvic]

u.e form thank you and oh really nice

[@tonyh3780]

Nice rig thinking about doing this to mine.

[@Freshkicksvic]

MadCap thanks I like it

[@adriangordillo6992]

What kind of rims are those brother ?

[@Freshkicksvic]

Adrian Gordillo there pacers they came off a Jeep

[@tylerbarrett8008]

Wow that's badass that guy is good

[@DogONRedRocket]

Two point half 😂😂 good vid bro!

[@Freshkicksvic]

DogONRedRocket lol thank you means a lot

[@danphillips8530]

I Wonder if i did this lift to my CRV would I be able to put 17"s on it. What I really mean is if I asked my brother to 'help me' do this if I could put 17's on it.

[@derchrissly]

I am also a CR-V owner and i am looking for distancedisc for my car. This video is pretty nice and i like the offroadstyle of your Honda. Greetings from Austria/Europe

[@Freshkicksvic]

tutnichtszursache thank you means a lot 🙏🏽

[@neuroleptika]

I like it

[@TheDerrty111]

Now i can go underneath your crv and steal those side running boards!

[@tylerwildman7119]

That crv looks sick!!! Ill buy that shiz from ya

[@manymartinez143]

Nice Wowow

[@cdpc211]

Those spacers are useless. I had those installed on my 2000 CRV. I took them off and replaced them with coil springs with 1.25" lift.

[@tonyrobles5499]

Why?

[@michaelmuniz5368]

Nice.

[@Freshkicksvic]

Michael Muniz thanks I’m gonna be posting more videos I haven’t lately because I bean working a lot of over time but work slowing down so I’ll have time now to post

[@ilonggoeasyrider2178]

Mud tyres looks better.

[@Altuhov.]

Тачка огонь!

[@afroman5531]

Was it just me or just me who was thinking damn i can chill under a car on a jack chillin on a drive way. No? Just me? Okay...

[@MRKLEEN-nj7ik]

I have a piece that will go with your ride really good I have a pair of Chrome metal taillights guard

[@drumminwithtony5147]

MR.KLEEN still have those?

[@alvaroferreyros8711]

Link for the strut kit please

[@Freshkicksvic]

Alvaro Revilla I’ll get right now

[@tongchang6198]

Nice Rd1

[@Freshkicksvic]

Tong Chang thank you 🙏🏾

[@shonuffisthemaster]

oh god, dont do it with spacers....seriously. they must be in california or something, because not only is this 100% for looks, but ive never seen one of those bolts through a bushing sleeve actually come out and not be completely rusted in place.

[@johnnycash1612]

I own a 89 crx si, 01 crv ex and 1979 jeep cj5. I love my crv but I would never try to compare a crv to a jeep. It's like comparing Joe Biden to Joe Montana. Jeeps are the real war machines.

[@miguelaltope7769]

I like

[@Freshkicksvic]

Miguel Altope thanks you means a lot

[@trynadosumn]

🌴⚡🍃

[@JosePerez-pj4cn]

Want to see hydraulics on these, that'd be awesome

[@jamiegunther2290]

dude must not want his legs

[@АлесяХижня]

Как вы бля их туда засунули ,это не реально?