The Dewalt DCF891 Mid Torque Impact Wrench Gets Put To The Test!

[@robcarr8505]

I just ordered one of these last night and after seeing this video, I obviously made the right decision. I'm not a mechanic. I just work on my own stuff a couple times a month. I'm just tired of using a tire iron. Thank you for this video. 🙏

[@EzTechJoe]

No problem man! I'm glad my video could help a bit!

[@cappalott6646]

Please don’t tell me you ordered it off Amazon

[@jucetgc2738]

​@cappalott6646 I was eyeing this on amazon, what's wrong with ordering from there?

[@hievoltage2]

@@jucetgc2738I orderd mine yesterday from Amazon. I would like to know also what the issue is.

[@XShadowAngel]

@@jucetgc2738 Nothing if you order it from dewalt's actual store and not some random person. Just lots of cheap chinese clones out there.

[@happygarage6310]

Thats a good impact, will do almost everything an auto tech needs , for less money than the high torque offerings

[@8power0]

I HAVE THE DCF891 ,,,,,,,,,,,,,,, I LIKE IT SO MUCH I AM GOING TO BUY THE NEW 6AMP BATTERY FOR IT . I GOT IT WITH THE 5AMP AND IT'S FANTASTIC BUT I KNOW THE 6AMP WILL TAKE IT TO THE NEXT LEVEL THANKS FOR THE VIDEO !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@EzTechJoe]

No doubt man!! It's a beast 💯

[@randythayer8440]

Thanks for the capital break down!

[@renforthe344]

Respect! I started with dewalt(high torqued, drill and impact driver) as well years ago. Love the the videos my man! Love your toolbox tour as well!! That showing and teaching younger generations of techs that you don’t need a fancy toolbox and expensive tools to started off in the industry! 😅. Definitely subscribing on your channel!🙏🏽 🤙🏽

[@EzTechJoe]

Thanks, man. I Appreciate that💯🙌🏾. And Exactly! Glad I share my journey with you guys

[@404notfound.....]

Very impressive !! My rigid mid torque will do the exact same job with the 33 mm socket. Again great video!!

[@claddagh1000]

I have the Ridgid and the 891 kills it

[@DiligentDave1966]

@@claddagh1000TTC showed that the 891 kills everything else. The only thing bad I’ve heard about it is that it’s so powerful that some of them have broken.

[@DiligentDave1966]

Sorry, 404, but I also have the Ridgid, but Dewalt and Kobalt have both beaten it. The Ridgid hits a respectable 600 foot pounds consistently in every test video I’ve seen, but Dewalt is around 800. I believe Kobalt hits around 700.

[@jbwilcomb]

Awesome! Obviously, it's not as snappy as a 1" air gun, but the fact it didn't struggle at all is very impressive. Great tool!

[@jerrysmith9935]

you have just put the test that everbody is looking to see real world action not a test machine numbers dont mean anything in actions tells it all great video

[@EzTechJoe]

Thanks man!. I firmly believe in that also!

[@davee6161]

Im just a backyard mechanic, that Dewalt impact is probably the best purchase that I've made. I haven't found one nut it wont break loose! Its a beast!

[@randythayer8440]

If that's a beast, I wonder what the max torque is?

[@davee6161]

I ment its a beast for the size vs. power. According to Dewalt it has up to 800ft lbs of breaking force. It does everything that I need it to do.

[@grandmastodon2848]

@@randythayer8440 dewalt has it rated for 800. however, there are many channels where it has broken 1000 ft lbs.

[@pauldollysweitzer9464]

That’s awesome. That was a great test. Might have to get one myself. My Milwaukee mid torque wouldn’t touch that.

[@EzTechJoe]

It's definitely worth it

[@vbarna4012]

Hello! Which Milwaukee do you have? I want to buy a mid torque for car repairs, that can loosen almost anything on a car (suspension, engine components). I looked at a Milwaukee 2962 and this DeWalt. I dont know which one I should buy.

[@michaeldeas1969]

Mine impressed me and I abused it for 6 months until I broke the planetary set. Ordered new parts for $94 and she's good as new. Got the dcf 861 on pre-order 😊

[@EzTechJoe]

I feel like I'll break something with the 861 lol

[@michaeldeas1969]

I'm planning on it😜

[@mick5740]

Whats the 861 ? Never heard of it

[@EzTechJoe]

@mick5740 it's the new high torque release by dewat. The DCF861. It's huge. Basically a 3/4 impact with a 1/2 anvil.

[@Johndeere60]

Dcf961

[@YouMotorcycle]

Thanks for doing this

[@BrainAny]

A high ring with a magnetic attachment would be great I think extra hold on sockets

[@paulp7561]

I could be wrong but I thought the #1-#3 adjustments only affected driving (forward) and didn't change anything when reversing.

[@EzTechJoe]

Honestly I never take it off of the #3 setting but you are right. But for a few different brands it affects both directions. But for dewalt I don't believe so. I never move it for the MOST part. When I need a few more ugga dugga is when I usually only grab this

[@JaiiClarkee]

Awesome man. I just got the monster DCF961 but now i orderd this because that one is such an over kill 😅

[@EzTechJoe]

Over kill is better than under kill, I always say 🤣

[@JaiiClarkee]

Haha thats true man!!

[@troyarrington5492]

How did you make the lug nuts just fall out of the socket like that? Sometimes mine get stuck in the socket

[@EzTechJoe]

Semi truck lugnuts are a 33mm socket. If you use a standard socket it probably would be to tight. Don't know if you do or not but that's usually the case. Just the wrong size

[@jiggyblends]

That’s sick

[@randythayer8440]

I didn't know tools could get sick!?

[@kellycowett6254]

Joe if your impressed with mid tourq get the full power one with a 8ah battery I've got 3/4 also it pretty dam hard hitter

[@EzTechJoe]

I'm actually thinking about going ahead and getting it

[@kellycowett6254]

@@EzTechJoe you will be pleased with it

[@randythayer8440]

Bully for you!

[@KingdomUploader]

Great joba showin it in action. Say, i'm looking at the amazon link and i see model number DCF891B - no straight up DCF891. You know, i have to wonder if they the same. What's up with that B Bro? :) thanks

[@EzTechJoe]

Appreciate it man. And yeah, the "b" just stands for "bare tool" no batteries or anything like that. Just the tool itself

[@KingdomUploader]

@@EzTechJoe not a lot of these that do come all together. guess they don't want to sticker shock folks. I did find it all with the dcf900 at walmark or just $257.99. pin detent style. if i can't find any dealbreakers i think i'll get it. Peace

[@abigailisrael8512]

Thats solid!

[@shawnm8232]

Is it too big in size for doing car brakes ?

[@EzTechJoe]

I honestly can't answer that because I don't work on cars. Never had to use it for that

[@inthedarkwoods2022]

youtube channel torquetest showed it hits around 560 pounds.. It's legit and a good one to use

[@grandmastodon2848]

Shop tool reviews, showed it breaking 1000 ft lbs.

[@mick5740]

🎉

[@NahyanQuasem]

Sheeeesh

[@jeremysuit6957]

I've got the dcf900 I love it but I'm saving up for the dcf961 ½ impact kit. I currently own 3 dewalt impacts two ½ an one ⅜