you had me at "I had sex with an overweight bridesmaid" lmao
@MrDJMikieMike2 ай бұрын
I had a Bride cancel the week of the wedding. Reason she calling off the wedding was the Groom knocked up his other girlfriend which the bride had no knowledge of. The young lady paid me in full for my services.
@aaronthedj122 ай бұрын
i rarely watch old live videos. this one worth the watch. good stuff.
@jerhart01Ай бұрын
I didn’t get a chance to read through all your comments, so I’m not sure if anyone suggested this, but I had the same issue that you’re having with your REV5 with my old S9. Literally the same exact issue and the only thing that worked for me, and I’m not even sure if this is a permanent fix yet but so far the past few months since it happened has been good, was unload the firmware and reload it back on. I’ve been told that depending on the way you power down certain items that the firmware can get corrupt on equipment. Try that if you haven’t already. You can get the new or old firmware on the Pioneer site itself.
@Dj3nigma2 ай бұрын
Buddy of mine sent me your channel. That was my post. Thanks for highlighting it lol happy to give an update on it but I’m def going to confront her.
@AaronStrawn2 ай бұрын
@@Dj3nigma bro- hit me up on Instagram if you do. I’ll bring you on to go over it- @djaaronstrawn
@Dj3nigma2 ай бұрын
@@AaronStrawn just sent the email out today. I’ll keep you posted on what happens!
@steveott18842 ай бұрын
I carry a Numark Mixstrem Pro as backup all the time. Sits on the floor behind me. All in 1. Perfect for backup to my Prime2. Same software. Also I love the IEC power supply for the Prime 2. Safer than a USB C in my opinion.
@djstreamtv2 ай бұрын
I think I had an issue with the Rev5 in the beginning where for a split second the audio cut out. Check to make sure you are on the latest firmware. Also most importantly I bought a usb c chroma cable to connect to computer. I don’t remember any audio cut outs in a long time.
@MrDJMikieMike2 ай бұрын
I’ve seen DJ’s, DJ weddings and other events with out and controller but still charged a Premium price.
@AaronStrawn2 ай бұрын
Hmmm
@djkeithjust2 ай бұрын
I love all you new DJs! Do a little research and you’ll see that Vestax came out with a mixer that did something similarly!
@djcarloАй бұрын
sorry to hear this
@AaronStrawnАй бұрын
@@djcarlo I think updating it helped!
@Earthcitizen46092 ай бұрын
If you’re losing sound route, your sound to a USB mixer and then use the rev 5 as midi controller only
@STATEMENTNYC2 ай бұрын
It VJ that happened with me with my flX 10 A DJ came to play with Vj in a club when you hooked up, all the music stop playing only1 red light was on. It’s virtual DJ causing the problem.
@ifonlyhowie2 ай бұрын
Hey Aaron. Just mentioned on Dj Pecks post last night about a new PA system thats just dropped in the UK called the DAP Frigga 12. Dual 12” sub with 6 x 4” column drivers with compression driver too. Look really nice and had a convo with a guy thats just got a set. Said they bump and punch WAYYY above their price tag. Sub seems pretty tall but not V heavy so prob grab a set in white. Not sure if they’ll make it across the pond but if it does as well as expected over here then maybe. Or get one of your contacts to take a look at the company. 😂 great vid as always 💪
@AaronStrawn2 ай бұрын
@@ifonlyhowie I’m always up for getting sent a pair!! Def gonna check these out.
That picture thing of the couple’s wedding doesn't strike me as a selling point to other potential clients…regardless if they have malicious intent. I have a 50% non-refundable deposit that has been working well for me. If they cancel a minimum of 14 days beforehand, their deposit is transferable to another client or they can postpone their event up to a year. If I facilitate contract transfer, only half of the deposit is transferable.
@DjTecniq2 ай бұрын
Def Furman power conditioner for big events. I have the straight furman power strip and it’s been flawless. I have like 3 of them.
@MrDJMikieMike2 ай бұрын
I only deal with a local printer in my area, I had Vista print do my cards one time and it was one and done.
@djplaybizy2 ай бұрын
Use the controller on your Serato on an off day for like 4/5 hours and see if it happens. You can put it on a auto Playlist for the majority of the time.
@johncolon8614Ай бұрын
Have you gone back to serato and see if it works and vdj is the issue
@cduemig12 ай бұрын
I took a tenant that trashed my house to small claims court and won a judgement for several thousand dollars. Doesn’t matter because you can force them to pay so it was another waste of money to fly in and go to court.
@NukePooch12 ай бұрын
Quite a few 15" subs are under 60 pounds....my RCF 705s are under 60. I definitely think it's doable for a 15" column. Heavier than that and it's a pain. Literally.
@djheattАй бұрын
i borrowed a friends ddj 1000 and it crashed serato. ended up being the windows sound output switched to the ddj so i had to select sound card for windows and ddj for serato
@djkeithjust2 ай бұрын
Also, we already swap drums with stems! This is just utilizing samples.
@Earthcitizen46092 ай бұрын
Had issues with rev 7 too
@djkeithjust2 ай бұрын
The GRV6 is a mid range controller and it’s a tool for learning not just for you bub.
@JohnLeyMystikmusic2 ай бұрын
try the Rane 4, it is a beast and works amazing on VDJ
@RNaz-c7t2 ай бұрын
Some of the new MacBook operating systems, require a os reboot after a driver install. It’s similar to a windows driver install
@AaronStrawn2 ай бұрын
@@RNaz-c7t definitely tried that
@pablomiami2 ай бұрын
the specs on the power adapter you have says 5Volts at 3amps (MAX) problem with the MAX part is that it doesn't specify if you're truly getting 3Amps when sharing power with other ports, think RMS vs PEAK on speaker power ratings. maybe 3A if you use it ONLY for the Controller without anything else connected to it. I would stick to the factory one if possible, the Pioneer Rev 5 uses 5V/3A aka 5V/3000mA. The Pioneer power supplies probably handles that or a lil more, and again is only supplying power for the controller so no issue there. If you need to use an aftermarket, buy one that has a higher current rating than your device, specially if it's an adapter that is sharing power with other devices. The higher rating on the power adapter only means that the max the adapter can handle not what will be sent to your controller. the rating on the controller/device is the highest rating of current that the device uses so in the case of the Rev5 it uses 3A(3000mA) at 5V. Which means that whatever adapter you buy, the Rev5 will try to pull 3A(3000mA) from the adapter. If the adapter is rated at say 6A(6000mA) then that means that the Rev5 will pull 3A(3000mA), leaving the adapter with plenty of headroom. The Voltage needs to be the exact same on both (5V), but the current (amps/mA/A) on the power adapter needs to be Same or Higher. I would opt for and adapter of higher 4A at least, if you're using all the USB ports or multiple ports I would aim for something with more current capacity
@AaronStrawn2 ай бұрын
Plugged into that strip in my booth is the mic receiver, touchmix 8, rev 5, and charging laptop. Is from what your saying, is that power strip not good enough to handle all that?
@pablomiami2 ай бұрын
@@AaronStrawn correct. I would look for a similar size device that says 5A (5000mA) or more. The fact that it says "3A MAX" makes it suspect....Pretty sure you're not getting a full 3A, which is what the controller needs. If your adapter says 3A but is sharing that with the other devices then is not going to be enough.
@pablomiami2 ай бұрын
@@AaronStrawn Also...as a test, run it at home by itself with the factory Pioneer OEM power adapter and see if you have the same issue...
@pablomiami2 ай бұрын
@@AaronStrawn I just thought of something else, if the adapter has surge protection, that could also cause some issues. Which shouldn't really be a problem for small equipment usually. is the reason it is not recommended to use surge protectors with speakers. i mean it could be a few things just hard to guess over the chat hehe
@viktorluchesse12 ай бұрын
That intro music lmao
@kudamah2 ай бұрын
There was an issue with the audio driver in the earlies ... but the last update sorted that issue out. Idk if u had the most updated drivers. So far mine with vdj has been fine - everything updated except the new macOS. I use vdj for hours ( 3 - 7 )with thddj 800/ ddj 1000/ ddj 400/ rev5 and never had dropouts. Did 3 gigs last wk with the 1000. All good.
@AaronStrawn2 ай бұрын
@@kudamah I was running the old firmware. I’m hoping that fixed it. Good to know we have very similar setup. That should solve it. What’s weird is that it started happening almost a year after I’ve had it
@kudamah2 ай бұрын
@@AaronStrawn issues with that old firmware... mainly a screeching sound was the most common. I believe u got away with it all this time cause vdj isn't as resource heavy compared to the others. Not using the original adapter and that fancy cheap extension could be other factors as well to look at if the issue shows up again. Hope it all works out.
@scottlapinski26022 ай бұрын
Are you sticking with the REV5? Or going with something else like a REV7?
@johncolon8614Ай бұрын
When i do 3 gigs I'm shot. Also
@Nogi-aka-DJNugz2 ай бұрын
I take 50% at time of contract
@DjTecniq2 ай бұрын
@@Nogi-aka-DJNugz same if not 50% then usually $500 and remaining balance paid the day of. I’ve even took weekly payments before. We all have family lives and I get it not everyone has money in this shitty economy.
@Earthcitizen46092 ай бұрын
Flex 10
@Baxter20052 ай бұрын
guitar center gives you like 2 weeks for returns try different controller bring it back if it doesnt work
@litproductions5032 ай бұрын
Bro you gotta make a Spotify album of your AI songs. That’s a thing now
@AaronStrawn2 ай бұрын
I love this idea
@bbsquared100Ай бұрын
I've had good luck with Pioneer customer service. Perhaps they watch your channel and have a * by your name? 🙂
@steveott18842 ай бұрын
More Amy!
@StevieRayEntertainme2 ай бұрын
Alpha Theta 4 is entry lvl 6 is mid tier and 10 is top of the line in Pioneers CDJ style controllers..... They use odd numbers for their turntablist systems 1, 5, 7 I think they skip numbers because they thought they would make others in between. 15" Sub 70lbs is lightweight for a 15 Whenever I buy a controller, I buy 2 of the same, 1 stays in the console, one goes on my desk for practice, the practice one gets in a lightweight carry case and goes to the gig too, just in case.
@OneElevenMediaCoАй бұрын
Yes!! Rev 7 has issues!!!! Just do some research and it will show sadly
@roymoxley25872 ай бұрын
Sorry breach of contract you don’t need a lawyer civil court it’s worth it
@DjTecniq2 ай бұрын
Curious did you do the firmware update? I had all sorts of robotic audio distortion and then it just cleared up and went away after I did the firmware update for Rev 5.
@AaronStrawn2 ай бұрын
@@DjTecniq I did one, and it’s supposed to be at 1.01. Hope that fixed it. If not, I’m trashing it
@DjTecniq2 ай бұрын
@@AaronStrawn may of been your issue as this was in the notes in the firmware “Fixed an issue where unwanted noise could be mixed with recorded audio”. However if you had anything else plugged into that tiny power strip you had chances are the power strip didn’t have enough juice to power the Rev 5 imo.
@andrepeterson71942 ай бұрын
Aaron… you can go back to your Prime 2!!!! Does it work with Virtual DJ!??
@kudamah2 ай бұрын
everything works with VirtualDj
@steveott18842 ай бұрын
If he got 50% downpayment and they still paid another DJ it's hard to believe there was much of a financial savings... Hope he got his downpayment...
@bizzybdj2 ай бұрын
Non refundable deposit in my contract... they trash though
@angelswithanedge2 ай бұрын
guess I won't buy a REV 5
@kudamah2 ай бұрын
don't be so quick to judge it based on his bad experience. He did admit to not using the original adapter and a cheap extension.
@nourdinh.14502 ай бұрын
Hey Dude play with Serato or Rekordbox thats it the Controller is Made for Pro DJ Software not bedroom Software hahahah 😉😉😉😉🤣🤣🤣🤣🤣🤣
@paulparrinello25262 ай бұрын
Aaron are you sure there will be a new EV Evolve array coming out soon? What gives you this idea in your mind? You need to have a back up controller. There is a glitch with the Rev 5 Aaron. Why are you not using the original brick that came with the Rev 5? That is not smart.
@DjBustaBust2 ай бұрын
Bad brain in it. Processor is cooked. Happens a lot due to microchip companies demand and supply issues. Pioneer is notorious for this
@AaronStrawn2 ай бұрын
@@DjBustaBust so you think it’s cooked?
@DjTecniq2 ай бұрын
@@AaronStrawn disagree. Try the Furman and the original power brick. If it’s under a year old you are still under warranty bottom line.
@AaronStrawn2 ай бұрын
@@DjTecniq if that power strip goes into the furman, would that help if it’s low on power or should I get a new strip?
@DjBustaBust2 ай бұрын
@@AaronStrawn if changing back to ur old power brick doesn't help it then ya
@StevieRayEntertainme2 ай бұрын
Rekordbox on iPad not as good as DJay...no stems, no video, beat grids not as good
@aaronthedj122 ай бұрын
@Drew Sim !!! thx for the gift sub bro! appreciate you