The Drinking Game, D6 Cat Clutch Removal Jan 25 2024

the only way to work on the D6 9U caterpillar cat is with lots of beverage and a box of Band-Aids. they are not the easiest piece of equipment to work on and that is why i only own 4 of these winter freighting cats. it has taken me 2 years to get the right mind set to change out the clutch which will cause me to drink more then usual. plus i might have to see Dr. Frazer Crane too. below is the link to the heavy metal rock band with the video of their song Bismarck which is what i listen to while working on my D6 9U known as the Bismark. thansk
SABATON - Bismarck (Official Music Video)
• SABATON - Bismarck (Of...
this is a daily updated channel from the Kingdom in Northern Manitoba Canada where every day is a struggle to survive in the new world we now live in. the life style of recycling, re-using, re-purposing plus living with no money is what the Kingdom has been all about for the last 28 years. we have been doing it long before it became a cool lifestyle. thansk
email ---- kingofobsolete(at)gmail.com
postal address ---- King of Obsolete, Box 372, Lynn Lake Manitoba, r0b 0w0, Canada
Joey Barnes KoO Amazon Author Page -- www.amazon.com...
20 years of my website -- www.kingofobso...

[@giork2828]

Hey folks look at Joey’s intro there, all playful like a cartoon deer in the snow 😊

[@kingofobsolete4789]

oh yes thansk

[@fredrikgustafsson8]

Yea🇸🇪🇸🇪🇸🇪 Great show👌

[@kingofobsolete4789]

thank you, just having fun thansk

[@thomasstewart9368]

Mental health is a valuable commodity. It gives us strength & problem solving abilities. You're the best 👍

[@kingofobsolete4789]

yes, that is why i drink, lol thansk

[@kennethsonier1766]

Good morning from Cape Cod 🦈 I think the image of you standing with a Budweiser in your hand next to the caterpillar clutch on the bench would be the best advertising. You certainly put a whole lot of effort into this repair, caterpillar certainly isn't mechanic friendly 😕 enough lubrication and you got it done 👍 I've been working on cars and trucks for 40 plus years and the newer the vehicle the worst piece of crap they become. My recourse is to hang with Mary Jane 😉 thanks for sharing and have a great day ✌️🇺🇲

[@kingofobsolete4789]

yes now days it is more computer work before you begin the project or figure out why. the new stuff will not be around in 70 years which is a known fact, lol thansk

[@littlepaddy7444]

I guess Caterpillar wasn't too concerned about ease of service but on the upside you're in a warm shop and there are no sand flies to help you.

[@kingofobsolete4789]

yes that is true plus i had 2 years to get the right mind set for the project, lol thansk

[@richardott643]

Feel your frustration when wrenching but still love the old cats. Got three 7u’s we have kept going for over 50 years. Here in interior Alaska.

[@kingofobsolete4789]

yes you will need then in the interior since you guys seem to get a lot of snow for some reason thansk

[@randymiller1604]

Good lesson on how to repair the cat clutch very educational video as always

[@kingofobsolete4789]

thank you, hopefully people will work on theirs and not give up thansk

[@ericmodeen4164]

I am glad you got your sewer line thawed with all the talk of assholes, your not wrong

[@kingofobsolete4789]

yes living remote we have to handle everything and anything including the not so nice people, lol thansk

[@TruthProvider]

I'm getting the distinct impression that IH cats are a lot easier to work on than Caterpillars... All that over-engineering on the Caterpillars and fiddling around to do what otherwise should be basic things but aren't, would cause me to lose lots of hair on my head (or cause me to drink!!)

[@kingofobsolete4789]

yes IH is user friendly and mechanic friendly with no special tools required or a box of band-aids. caterpillar you need lots of booze and a box of band-aids, lol thansk

[@giork2828]

I just commented in the Sabaton music video (link in description), and it would be nice if you folks could like my comment there or write your own, help divulge the King’s work! Nice energetic song there Joey!

[@kingofobsolete4789]

excellent thansk

[@tonyjones9715]

I did a lot of work on the old D8 cable blade cats back in my younger days.👍👏👏👏

[@kingofobsolete4789]

oh my, you drank lots and had lots of band-aids on you hands then, lol thansk

[@dave-uf8ir]

Dam Joey I ran into that bolt head problem clearance problem before also excellent video night guys 😊

[@kingofobsolete4789]

yes have a drink and continue on thansk

[@rickhewitt9529]

You and I would have had a lot of fun back in the day. I had a w1000 Ford cabover with a 335 Cummins. Lots of smoke but not a lot of miles in a day. 500 was a huge day back then. 😂

[@kingofobsolete4789]

yes and most likely we both had hair on top of our heads too, lol thansk

[@rickhewitt9529]

@@kingofobsolete4789 something else I just thought of. Mine had the 4 and 4 transmissions. Wasn't original. I bought it from a old school guy he didn't like the air shifted stuff.

[@rickhewitt9529]

I laugh when I see your hat. I live in northern California, but actually southern Ontario Canada. I have a hat like yours and my kids make fun of me. I guess they would rather freeze to death. Loading lumber in a yard in northern Ontario at 40 below, you do everything you can to stay warm.

[@kingofobsolete4789]

yes they are a warm hat and the best for when it is windy too thansk

[@shawnmcfee2333]

Good day

[@kingofobsolete4789]

yes it was thansk

[@chrismoody6920]

Joey You should get one your trucks on the road that way you can get the dog food yourself It really suck when you try to relie on people we are having the same problem here You can't rely on nobody now days Great video

[@kingofobsolete4789]

yes we willhave the film trucks on the road to go out shopping once the money tree blossoms. thansk

[@berniebuker1650]

Didn’t realize how different the IH and cat cats are. Great job explaining all this. Your a natural teacher.

[@kingofobsolete4789]

thank you, hope other watch and don't give up on working on their caterpillar cats. just need more beverage, lol thansk

[@jonnothetrucker]

Loved this one ! Also liked seeing the Australian flag up there flying 😊 greetings from a slightly warm 42 degrees celsius Newcastle Australia 🇦🇺

[@JohnShinn1960]

Oh those poor popsicles. 🥺 Happy Australia Day! 👍🤠 🇦🇺🇺🇸

[@jonnothetrucker]

@@JohnShinn1960 it's been a long very happy Australia day of beer, aircon, and between the pool table, and the fridge! Only meant to be +27 tomorrow instead of low 40's, so looking forward to that 😃 I hope your day is a good one sir !

[@JohnShinn1960]

@@jonnothetrucker It is, 🍻

[@kingofobsolete4789]

your welcome, the australian flag is to show my Kingdom Followers down there that we are thinking of them melting away, lol thansk

[@jonnothetrucker]

@kingofobsolete4789 +43 yesterday, now 0630 the next day, and it's drizzling rain, and it's +23 with a top of +27. some weird weather Joey 😂

[@benjamincresswell3713]

Mr. King, I believe that when something is hard to repair it's because: 1) They were copying someone else's work (reverse engineering it) and trying to make it just a little bit different to beat their patent or: 2) They just didn't know what the Hell they were doing, and lucked onto something that worked, so they went with it even if it ended up being clumsy. Very early on in my work life one of my boss's told me: The difference between an amateur and a professional is: The professional fixes his mistakes, The amateur lives with them. Later in my working life I was told: Some people make things difficult just because they can. It took me a long time to come to grips with the idea that someone would intentionally make something difficult for someone else. Maybe I come from a very protected childhood. I do wonder about it. Your work looks professional to me, I'd hire you. ben/ michigan

[@kingofobsolete4789]

yes the saying goes that caterpillar made a steam engine run on diesel fuel because they were so far behind in their development. not sure why they made things so hard to work on when there was no need. thansk

[@MatthewTomczyk-rk2cj]

KoO is the King of Adapt and Overcome all Obstacles. I started using your ‘Cut off plastic oil bottle’ ends for screw, part, bolt trays and they are working mint.

[@kingofobsolete4789]

excellent, the best way to live in this new world is to re-use, re-purpose and recycle because no one has money any more thansk

[@veccio65]

brilliant..no longer will I price a job by how long it will take, but by how many drinks I will need

[@kingofobsolete4789]

yes that is the best way to figure it out, lol thansk

[@certified68crazy3]

Joey the first rule of thumb for designing equipment is make it difficult to repair because WE are not going to have to. This coming from a retired locomotive mechanic. Their motto seems to be if it's not broken were not trying...

[@kingofobsolete4789]

yes it is unreal how hard they make things and that is why they don't get saved or become some ones hobby later in life thansk

[@SirRodney515]

1

[@ridewot]

Me first sirrodney 😊😊😊

[@TruthProvider]

Superb! 👍

[@kingofobsolete4789]

excellent thansk

[@peterandersen1378]

D6 repair budget: Parts = $200.00 Beer = $7,500.00. YES!

[@kingofobsolete4789]

yes that is about correct and we wonder why these projects cost so much, lol thansk

[@DerekKidder]

We seem to have the same weather a day or so later Friday it was 8 Celsius hardly any snow to worry about good for working in the buch D kidder Wakefield Quebec

[@kingofobsolete4789]

yes we get fort mcmurray weather in 24 hours and then you get it. better forecast then what the weatherman is paid to tell us. thansk

[@adz.gamestreamer]

Happy Australia Day Joey, I get to work tonight... Oh yay

[@kingofobsolete4789]

excellent, working when it is cooler temps is always the best thansk

[@danthompson1467]

I always found cat equipment not bad to work on if you had there service manual and there tooling that just was a way to get more money out of you lol 👍👍🇺🇸🇺🇸

[@kingofobsolete4789]

yes that is true once you know the tricks it is not too bad. thansk

[@929cbr_rr]

Oh man, that clutch does not look fun ! You're a better man than me fighting that thing !

[@kingofobsolete4789]

yes took 2 years to get the right mind set to do the project, lol thansk

[@joutdoorsmen23]

Great educational video, and great music video too thanks for suggesting it, enjoy till tomorrow

[@kingofobsolete4789]

thank you, sabaton has lots of good music to rock along with. thansk

[@digger0429]

Lot of take apart stuff keep going

[@kingofobsolete4789]

oh yes, extra hours added to the project thansk

[@rono108]

Your Pops would be pround of you King. Well done, and for sharing for us next generation of northern dwellers, Canadians and American Cousins 👍

[@kingofobsolete4789]

thank you, finishing his project will make him happy. thansk

[@genepolley2119]

Some of us don't know about the promo bike. Please educate us. I have watched you from back in the RED POWER FORUM. Keep going. Now I am reading your books too.

[@kingofobsolete4789]

oh my that was back when i had hair on top of my head. here is the video that Sir Rodney made of the Promo Bike. thansk kzbin.info/www/bejne/bHXaiGB-Yr6WfK8

[@liljoeii6091]

Yes always good to walk away a little bit take a break and have a fresh start in the morning. Get to relax and sit back and have a cold one. cheers to both and thank you for the video

[@kingofobsolete4789]

yes and have the right mind set before starting the project too thansk

[@arnoldvoth482]

Like I always say,I’m not an engineer but I knew how to fix their f$&& ups,they didn’t like it when I said that but like you with the flywheel bolts,unreal😂

[@kingofobsolete4789]

yes all they had to do on almost everything was give just a little more clearance but no, lol thansk

[@ridewot]

Hi 👋🏼 😊😊😊

[@kingofobsolete4789]

you came back, lol thansk

[@beginlivinglikeaboss]

I feel your pain. My D6 has a dry clutch at least 😊

[@kingofobsolete4789]

being a dry clutch it would be an early model year then. thansk

[@beginlivinglikeaboss]

@@kingofobsolete4789 yes a ‘51

[@kingofobsolete4789]

yes that is the early one. thansk@@beginlivinglikeaboss

[@LarryDeSilva64]

The Bismark went down running hopefully the operator bailed before it went under. Cat always did make engines a bit difficult to work on with bolts and pieces in the way you either had to try and work around or totally take apart. You are doing a great and what would be a frustrating job for me. What would we do without a come along hoist. Thanks for the video

[@kingofobsolete4789]

yes both operators survived the sinking. not sure why caterpillar made it so hard to work on and that is why i only have 4 which is 4 too many, lol thansk

[@williamgarrity9482]

Second. God bless yall real good.

[@kingofobsolete4789]

thansk

[@JohnShinn1960]

Stayin tuned! 👍🤠

[@kingofobsolete4789]

me too, lol thansk

[@rickhewitt9529]

Hahaha. 68 and I still do. Down to the middle of my back. The 70s keep calling and wanting it back but I ignore the call. 😂😂😂😂😂

[@kingofobsolete4789]

yes good times back then at least we have our memories, lol thansk

[@towdude7909]

hey brother joey i like your style when you talk and educate about your equipment i like that but it would nice if i could buy a movie with nice pretty ladies and tata's but i can't but also we have been getting alot rain here in the south and it's still cold here please stay in touch and stay warm and drink a beer for me and a shot of crown!!!!!!!!!!!!!!!!!

[@kingofobsolete4789]

yes these videos are to show people to get working on their projects no matter what. caterpillar is not an easy machine to work on but just have more beverage and a box of band-aids, lol thansk

[@ericmodeen4164]

If stallon would allow you prapane you could put a shrimp on the barbie

[@kingofobsolete4789]

yes we can't afford anything in the new world we now live in, lol thansk

[@fruitfarmfords8243]

That rod is like a certain prime minister.

[@HermanMunster-o2j]

He drives a ford💩 lol

[@fruitfarmfords8243]

@user-qi9bn2ns2l Any ford smaller than an F250, built after 97 doesn't count..

[@kingofobsolete4789]

oh my thansk

[@jiminalaska]

Sometime maybe you can tell us you really feel about the people you deal with LOL. You never run out of stuff to work on do you.

[@kingofobsolete4789]

i am being very polite in these videos about people who screw me over. so glad i retired because i would have just lots more and more money with them, lol thansk

[@jeffricher-qy4bq]

Your intro hurt my head was today tomorrow yesterday or was today tomorrow? 😁👍

[@kingofobsolete4789]

yes confusing like father's day in WHO-ville, lol thansk

[@rossclarke3663]

2

[@kingofobsolete4789]

thansk

[@HermanMunster-o2j]

Geez the same guy that designed that cat must have designed 💩Ford stuff also lol

[@fruitfarmfords8243]

Riiight

[@kingofobsolete4789]

yes or his cousin, lol thansk

[@dave-uf8ir]

12th common sense 😊

[@kingofobsolete4789]

thansk

[@duanedale2505]

Nice video , too bad about the drama , it seems like there always has to be a couple assholes to cause issues in life

[@kingofobsolete4789]

yes that is why i retired and only work on my collectables now thansk

[@JohnShinn1960]

Happy Aussie Day Australia! Aussie pie eating contest flushed with beer: kzbin.info/www/bejne/o5ixh618rsZkmZosi=dApz6QQzGNarguD3

[@kingofobsolete4789]

yes we should all have another drink for them, lol thansk

[@robertestes196]

So,the guy that your dad bought the truck from was impersonating a sphinkter muscle.

[@kingofobsolete4789]

i guess so. thansk

[@wilmamcdermott3065]

Cat is the. Hardest to work on

[@kingofobsolete4789]

oh yes, i will drink to that, lol thansk

[@wilmamcdermott3065]

Did a clutch and rear crankshaft seal on my td14 in a snow bank back in my late 30s took me about 7 hrs on this D7 I have I bet it would take 2 to 2.5 days longer now I am 69years old

[@kingofobsolete4789]

yes that is about right on the time frame thansk@@wilmamcdermott3065

[@jamesdavidsmith4033]

Do you like ELO?

[@kingofobsolete4789]

yes they seen to have their songs added to great video fun for some reason thansk

[@whitefordf15004]

Ole peg from zip ties and you need to get drunk

[@kingofobsolete4789]

any excuse to have a drink, lol thansk