The Easiest Way to fix your Hummer H2 or H2T Shift Cable!

Order Online at www.BushingFix.com
This shift cable bushing repair kit allows you to fix your Hummer H2 shift cable bushing very easily. Also works on Chevrolet Trailblazer, GMC Envoy, Saab 9-7x, Oldsmobile Bravada (02+), Isuzu Ascender and Buick Rainier, as well as Hummer H2 and H2T and Chevy SSR. It takes about 2 minutes and comes with a warranty, it's made from better material than the factory bushing so it'll last longer.
www.bushingfix....

[@latham110]

Thank you for making my Hummer easy and affordable to work on. Replacing this bushing took less time than it took to roll out my floor jack! Gary of Asheville, N.C.

[@BushingfixFL]

Thank you so much for the feedback. We love being able to help out.

[@AustynO100]

Very freaking helpful! I wish I would have seen this 3 days ago. 3 days wasted and still looking for a fix! Thank you

[@BushingfixFL]

Thank you so much for the feedback. We love being able to help out.

[@silenthillfarms]

This worked like a dream and got my Hummer back up and running in 1 minute. The original bushing was essentially disintegrated.

[@BushingfixFL]

Thank you so much for the feedback. We love being able to help out.

[@w4gap]

Thank you so much for providing this service. My 2005 H2 just experienced this issue last night....

[@BushingfixFL]

Thank you so much for the feedback. We love being able to help out.

[@Roalviro]

This just saved me $350 that a dealership tried to charge me... :) thank you!

[@BushingfixFL]

Thank you so much for the feedback. We love being able to help out.

[@tonylofu1970]

I am 2010 Hummer H3 transmission module problem where do I get it

[@ckjhill67]

i first went to Autozone and got their bushing repair kit...waste of money. busted my ass trying to get any if the bushing to fit. I order the bushingfix kitand I took me about 10 seconds to fix the cable. The bushing went right in...Great product.

[@BushingfixFL]

Thank you so much for the feedback. We love being able to help out.

[@cluck3627]

Ty bushing fix ....worked like a charm

[@BushingfixFL]

Thank you so much for the feedback. We love being able to help out.

[@Froztinc]

Mine was difficult to install and what worked for me was pressing the bushing on to the pin and then pushing the linkage on to it then it all snapped together.

[@BushingfixFL]

Well done! Thank you for sharing your tips and experience!

[@SGuirin]

awesome video. Thanks

[@BushingfixFL]

Glad you liked it!

[@SGuirin]

@@BushingfixFL it literally took me 1 minute to replace it. Great video, short and right to the point

[@user-ke5yb5mj3x]

Awesome! Thank you!

[@BushingfixFL]

You bet!

[@datzlukeh2627]

Thanks for the video! Very helpful fr!!

[@BushingfixFL]

Thank you so much for the feedback. We love being able to help out.

[@alexanderspanopoulos1385]

@@BushingfixFL question! My shifter interlock solenoid failed on my truck. I want to detach the shift cable from the transmission to manually get the truck into drive and get it to a shop. Does the cable just pop off, the reverse of what you did to put it on? I don’t want to break anything unnecessarily.

[@TRColclough]

Worked great

[@BushingfixFL]

Thank you so much for the feedback. We love being able to help out.

[@RENALCOP]

This is awesome

[@BushingfixFL]

Thank you so much for the feedback. We love being able to help out.

[@elvislives-gl4rv]

Mine failed yesterday. The problem is that I didn't first understand the issue. The shifter got locked in park when the tranny was still in drive. Once you shut off the engine, it won't restart and it won't shift. I had to remove the console, stick my hand down to the right of the bottom of the shift (tight fit) and push the silver mushroom shapped release pin to break free the shifter. That got the shifter working, but obviously didn't solve the problem since it was the bushing failure. Almost called the tow truck and went home. Looked it up and started to re-analyze the problem. Went back to the truck and got under. viola! Put it back in place manually to get home and now waiting on the mail for the bushing to fix permanently. In mean time.....duck tape.

[@BushingfixFL]

+elvislives81677 the repair with the new bushing is much easier than what you've had to do thus far! Good job figuring it all out I must say taking the console out is not a ton of fun. Let us know if you have any questions when your part arrives.

[@ahmadmathori5213]

Thanks your videos

[@BushingfixFL]

Glad you like them!

[@heronramos6398]

Gracia era exactamente lo que pasó con el mío iba de salida me reversie conecte la trailer y al querer moverlo ya no dio pa ningún lado. Muchas gracias por ese típ

[@BushingfixFL]

¡Muchas gracias por su comentario! Ayudará en gran medida a nuestros clientes de habla hispana. ¡Tan agradecido de que pudiéramos ayudarlo con su reparación!

[@rubenavila6415]

Is this only available at the dealer?

[@BushingfixFL]

No it can be purchased online or at select retail locations find one close to you at www.bushingfix.com

[@Thel2552]

My kit didn't cone with a cup

[@BushingfixFL]

If you would kindly send your order number to us we can reference what you ordered and send you the cup if you need it for your installation. Our email: [e-mail]

[@oldmanhendo7183]

So does your guys bushing actually last? Mine broke on my H2, took it to Midas and had it fixed only for it to break again two days later. Got it fixed again but I don’t even trust driving the car now

[@BushingfixFL]

Yes ours does work. We also offer a Lifetime warranty so if you have an issue we will replace the part. Its very simple to do yourself. Also, you want to check the pin the cable fits onto to ensure its not rusted because that will destroy a bushing. The shift arm can also be replaced without too mush difficulty.

[@oldmanhendo7183]

@@BushingfixFL ok thank you. I’m gonna give it shot

[@oldmanhendo7183]

@@BushingfixFL can we only order the part directly through your site?

[@BushingfixFL]

@@oldmanhendo7183 You can order through Ebay; Walmart; Amazon as well as Amazon Prime as well as our site!

[@BushingfixFL]

@@oldmanhendo7183 You can also order the TB1Kit9 via Amazon

[@enzodryfus]

You s this from underneath the truck? Thanks!

[@BushingfixFL]

Yes, under the truck, below about where the driver's seat would be.

[@BushingfixFL]

Currently only available at www.BushingFix.com, soon to be available in auto parts stores nationwide.

[@johnnyninetytwo]

What part number is this ? I see different ones for the h2

[@BushingfixFL]

Kits may vary by year. What is year of your H2? and are you replacing bushing at shifter or tranny end of cable?

[@johnnyninetytwo]

@@BushingfixFL it’s a 2006 & for the end by the trans