The EL34 Amp is Ready for Pre-Orders!

[@ThePerkri]

Congratulations!!! I’m so very happy, and excited for you! Can’t wait for you to notify us that the first five have been sold. Well done!

[@marksmusicobsession]

Congratulations on reaching the ready to sell point! I like the “speaking with perspective customer” practice. That alone makes the price point even more reasonable.

[@kdntool9369]

Skunkie Is Right!! I have been listening to an EL34/7025 amp, based on her 6SQ7 circuit, for a month now and it sounds wonderful!! I am using a pair of NOS Electro Harmonix EL34EH’s with a new production EH 7025 driver and the Edcor 5K iron. They all mate well with my vintage mid-70’s AVID 3-way sealed speakers. Plenty of clean power for my personal listening levels. The 3D imaging is excellent. I listen to vinyl thru an EAR834 clone and also digital via a home brew R2R ladder DAC. Congratulations Stephe on your accomplishments and I cannot thank you enough for re-igniting the tube bug in me. I wish you all the best!!

[@SkunkieDesignsElectronics]

Thanks for the update!

[@primepreowned1]

Congratulations Skunkie. I’m so Proud of you. Your the Bomb !!!

[@DrGIzmoBRad]

Edcor iron definitely plays nice w/ my Tongsol EL34B'z. Glad you've vetted the tube-iron mix and finally heading into production land :)

[@FredPutterman]

Very happy you are starting to sell. If I cannot purchase this first round, I hope to purchase in the future.

[@solomonstewart1025]

Wish you the best Steph!

[@billpeirce7]

Congratulations! Wishing you the best.

[@SkunkieDesignsElectronics]

Thank you so much!

[@TheJoyofVinylRecords]

I'm thrilled to see this and wish you the best. 2024 is your year, Steph!

[@jamesoneil9757]

I am excited to see this Skunkie amp go on the market. Where else could someone buy a tube amp where all the measurements, design concepts, component comparisons, and subjective listening is so well published. Not only can someone get a nice amp but also learn a lot about gear.

[@juanchapa71]

Congrats!! So excited for you and the community!!

[@lewiswaddo5045]

Absolutely amazing! Congratulations Stephe! Watching your journey on KZbin has been inspirational

[@cobar5342]

Going great Stephe!! Looking forward to kits - Living in Australia ....

[@ceylonmooney]

stephe, congradulations on this sweet amp! i admire and respect your work, and i really, really appreciate the videos.

[@JaqUkto]

Congratulations and good luck!!!

[@ceylonmooney]

5751 is not a drop-in replacement for 12AX7, but its very close and subs fine in many circuits.

[@bob_mosavo]

Thanks, Steph 👍

[@MarkSWilliams27]

Good going! I enjoy your videos and admire your skills. I can build a kit, but not from scratch!

[@SkunkieDesignsElectronics]

You can do it!

[@Mikegritz]

This and a pair of matched speakers would make a fabulous birthday gift for anyone who loves to listen to music.

[@SkunkieDesignsElectronics]

Amazon has the first version of the RP600M on sale right now, they work great with this amp!

[@jonwatchesnyc8777]

Congratulations! I am sure this will be a great success and hope to eventually buy one for myself

[@jorgemellooliveira9611]

Ótimo vídeo congratulações

[@toddhupp]

cool skunkie.You are on your way!

[@frankgeeraerts6243]

Great ..........wishing you all succes and pleasure realising your project . Indeed a good 5751 is a win win..........even in a vintage MC Intosh it sounds very good. You have a winning team with this amp...........few tubes , simple circuit ( lesser components ; less degradation and less loss of the musicalsugnal ) and resulting in great sound , the price of the Edcores makes it a steal to build and sell.. PS : It could be interesting to measure the resistance of the windings of the OPT as well as the symmetry of both PP windings and compare these on both OPT's . Kind regards

[@stuartmitchell1908]

Good luck! If I had the room.. and money. Hope you sell as many as you can make!

[@jangrinaert]

There is not a single 12AX7 I really like, and I tried many brands. 5751s are the tubes to go for, especially the military grade General Electrics.

[@thepracticalaudiophile]

Nice explanation. I have LRS+ so as you said not for me. Maybe in the future?

[@Cobra-ky9bt]

Great news!

[@drexellake4051]

Awesome!

[@I.am.KubKab]

Congrats

[@dtg474]

Congratulations Stephe. I like the 5751 in place of the 12AX7. I think it may tamp down the drive just a scosh. And of course it can drive a EL34 easily. I didnt know JJ made a 5751. I check it out. Congratulations again on the entire enterprise and i cant wait to see it take off. Thanks for sharing.

[@SkunkieDesignsElectronics]

Yeah, it's a GREAT sounding tube!!

[@C-man553]

12AT7 maybe? I like vintage Tele, fwiw.

[@dtg474]

Dave Hartwick take a look at the plate characteristic curves. A 12AT7 is very linear. Try 12AY7 instead. See the 12AT7 tube data sheet.

[@willwill5595]

Great channel. Was hoping you might consider a 2a3 amplifier with volume control some time in the future. I know you mentioned you want to build amps with easy to get components. But, I have always heard that 2a3 single ended is the way to go for voice. Thanks.

[@SkunkieDesignsElectronics]

I've got all the parts to build one here :)

[@sjhorton1184]

@@SkunkieDesignsElectronics Hope that this 2A3 amp is your next YT project and comes out right after the new BOM and updates for this amp over the 6SQ7 version.

[@michaeltierney514]

Congratulations Steph ! So proud of you ! USA !

[@NickP333]

Congratulations, Stephe! 🥳🎶🔊💜 This is great news!

[@hanksta34]

Congratulations! Good to hear about the bass response. Any expectation of a holographic soundstage?

[@SkunkieDesignsElectronics]

That's why I went with the Edcor.

[@markhershberger9477]

Very good Steph I hope that your project and enterprise is very successful! I may very well sometime be interested myself, although not at the moment. Maybe you would consider posting physical measurements with and without tubes, weight, sensitivity recommendations related to speakers and types, any disclaimers you feel appropriate, etc. It seems to me this would only benefit potential customers and yourself in the clarification of that information. Thank you for considering and good luck with you and your early adopters!

[@SkunkieDesignsElectronics]

Great tips. I hope to put an info page on the website this week.

[@jukingeo]

@Skunkie Nice to hear you are ready for production, but I am definitely going the DIY route. Glad to hear the Edcors won out with that pair of amps! Well, I was hoping that would be the case since I already have them and don't intend to buy another set of output transformers. As it is I still have to buy the power transformer. I know I have some EH, JJ, and Svetlana EL34's kicking around. Not sure if I have 5751 tubes for the input tube, but I certainly have quite a few 12AX7's laying around. Curious if you tried a 7025 input tube. I have a couple of those kicking around too. Can't wait for the BOM!

[@SkunkieDesignsElectronics]

yeah, 7025 works well too.

[@tedanderson5528]

🎉 awesome

[@nlaco-m1h]

Nice!

[@herminiogeronimo4269]

Congratulations Steph, I'm very excited to buy one, how could I? Thank you

[@SkunkieDesignsElectronics]

email me at [e-mail]

[@robertpollak6572]

Just a suggestion if you were listening to your amplifiers with two different speakers. Triangle bro 3's, for example. Now $350

[@1moderntalking1]

Looks great! How much including shipping to Sydney Aus?

[@SkunkieDesignsElectronics]

Sorry, as of right now I don't ship outside the US.

[@1moderntalking1]

@@SkunkieDesignsElectronics oh no 😢

[@briancampbell7712]

@@SkunkieDesignsElectronics is this a single ended 2 channel and how many watts per channel...also if 2 channel , how come only 2 el34 and not 4? I was intrested...but no shipping outside US😔 good work! & I love your passion...so I know it's great!

[@and1424]

Stephe, what are your favourite current porduction EL34s? Thanks!

[@SkunkieDesignsElectronics]

Easy, JJ EL34L. These new Horizon tubes from Psvane are also very good.

[@gee3883]

Go Skunkie.

[@AngelAlamedabailbondsman]

Why can I not have cool neighbors like you. You have so much knowledge and are so talented at tube amps. Thank you for all your videos. Greetings from Tulsa, Oklahoma amd best wishes on your company. L9ve the Skunkie Designs name.

[@SkunkieDesignsElectronics]

Wow, thanks!

[@bobbymccourt6794]

Congratulations any plans on offering these as a kit for us DIY guys

[@SkunkieDesignsElectronics]

Not sure yet. I need to get the chassis work outsourced to be able to do that, too much hand labor to just put that much work into a kit.

[@sixstringsdown1]

Enough power for my KLIPSCH FORTE' ONE'S? 😁 I'M thinking probably so, at 98 db efficiency.

[@SkunkieDesignsElectronics]

Absolutely. It easily drives a pair of RP600M.

[@sixstringsdown1]

@@SkunkieDesignsElectronics Steve Decart of DECWARE is only a couple of hours from me.

[@SkunkieDesignsElectronics]

He makes good stuff.

[@electronicmusic6609]

How much will cost ? Will be just for US ? Send to Europe ? Thank you !

[@SkunkieDesignsElectronics]

US only for now, sorry. And the price for the "basic amp" is $1950 USD

[@1mctous]

$2K isn't too much to ask for your level of parts, build quality, and customer support. It's all about long-term value.

[@SkunkieDesignsElectronics]

And honestly, if someone expects a hand made in USA amp, that are individually burned in and tested, both on an analyzer and listened to before they are shipped, using high quality hand picked parts, for the same price as a poorly engineered mass produced China amp off Amazon, they aren't my target market.

[@flyingmattyboy]

Very interesting steph those edcores have a good rep. It lookes awesome. I am very tempted to strip my tubelab sse and use the parts for one of these.This is so exciting, will we get to see the finished underside?

[@SkunkieDesignsElectronics]

Of course!

[@flyingmattyboy]

If you dont mind me asking Steph, u mentioned 600v solid wire, where can we get this? I struggle to find it at normal prices. Also what model edcores are they, assuming 5k or 3.5k.

[@SkunkieDesignsElectronics]

15W 5K Edcor and yeah I had to buy 100ft spools to get this 600V rated wire.

[@herbieschwartz9246]

I have a set of Cornwalls, vintage 1984, original drivers and crossovers. They are extremely efficient, but a little picky about what sounds good driving them. Have you powered any Klipsch with the EL34 amp?

[@SkunkieDesignsElectronics]

Not yet, I have a pair of Chorus II speakers but honestly my room is too small for them to sound good. You'd probably want to do something like triode strap the EL34's and run no feedback with those speakers?

[@herbieschwartz9246]

My listening room is only 20' x 25 ' which is probably why the amps driving those Cornwalls is critical. Hard to believe, but I use an old set of ADCOM pre and power amps (250 W per channel) and those sound very good, but they are getting tired and show signs of needing recap (left channel getting weak). I'm an engineer, but not electrical engineer so I only understand the basics of electrical voodoo. A friend (electrical technician) has measured the wattage of normal and MAX LOUD listening levels and those go between 0.5W to 5W max (at 5W I need to straighten all the pictures on the walls afterwards). Experimenting with the location of the Chorus II, you might find them really good, but they are not like the old-school Klipsch stuff. Anyway, shopping for a new power source for those old speakers and it sounds like you care, which is increasingly rare now days.

[@adamphillips1263]

@@herbieschwartz9246 They might be the last of the old-school Klipsch stuff. I have a pair - always wanted KHorns but see no good reason to buy anything else.

[@SkunkieDesignsElectronics]

I honestly think this amp wired as triode with zero FB might sound really good with those speakers.

[@dixter1652]

was curious what the output power is on this amp... looks nice

[@SkunkieDesignsElectronics]

7W, best used under 4W to allow some headroom for transients.

[@Pinball-Audio]

Any plans for 6L6 amps..?

[@SkunkieDesignsElectronics]

Not right now, a SE 6L6 would be pretty low powered.

[@jalford383]

Can it have a buffered Sub output ?

[@SkunkieDesignsElectronics]

Sorry, no. If you need that I would use a pre-amp that has that function.

[@C-man553]

I wonder how your amps would do on my Quad 57s or Sanders model 10?

[@SkunkieDesignsElectronics]

Probably the worst possible match for this amp. "The Quad ESL-57 is no easy task for an amplifier. Firstly, it is woefully inefficient: the speaker has a sensitivity of 83 dB at 2.83 volts"

[@C-man553]

@@SkunkieDesignsElectronics Thanks. I get the 34 and 84 mixed up. 7 watts, no way of course, but nice work and engineering.

[@thomasfi1275]

You use all JJ tubes. So I assume they are reliable and sound nice?

[@SkunkieDesignsElectronics]

Their signal and their EL34L output tubes are reliable and sound great. If you notice I am using a Sovtek 5AR4, the JJ rectifier tubes are horrible!

[@Coolguy-xo3cj]

How does this sound compared to a 300b ? Don’t make a 300b integrated amplifier??

[@SkunkieDesignsElectronics]

More dynamic is how I would describe it. The 300B has a unique sound, maybe more musical? Hard to describe, they both sound very good.

[@briancampbell7712]

ship me one of the base versions el34 to Spain for my Tannoy Arden mk1❓how many watts per channel, missed it...? why would anybody need a volume control if they have a preamp...?

[@SkunkieDesignsElectronics]

Sorry, I don't ship outside the US.

[@sixstringsdown1]

BTW, what does that 2 stroke motorcycle cylinder belong to? 🤔

[@SkunkieDesignsElectronics]

Yamaha Kart racing engine from the early 1980's.

[@sixstringsdown1]

@@SkunkieDesignsElectronics COOL! 😎 Shifter Kart? Looks big.

[@SkunkieDesignsElectronics]

Nah, 100cc open class, ran on methanol power range was between 10,000-15000RPM. Won lots of races with it.

[@De132an]

At 600v can we even try a KT150?

[@SkunkieDesignsElectronics]

The output transformers limit the use to 60ma current tubes. Any of the 25W 8 pin tubes can be used.

[@De132an]

@@SkunkieDesignsElectronicsOh ok, thank you. Can we do a single ended version? 15 to 18 watts? 🤞

[@SkunkieDesignsElectronics]

Look up my videos on KT120 monoblocks.

[@De132an]

@@SkunkieDesignsElectronicsNew to your channel and really enjoy your videos. The TS KT-120 you went through has really surprised me. What junk! My last batch of KT-150, eight of them for my Mike Sanders V4 mono blocks, lasted 6+ yrs till the highs started to become dull. Even though they still held rock steady bias. I never knew tubes were such a crapshoot. Mike was known for his tube testing , guess he certainly proved it to me. Anyway I hope our tube situation finally resolves itself. The Russians I don’t trust either, but the Chinese if paid enough can produce better, only if we will pay?

[@SkunkieDesignsElectronics]

A push pull amp has MUCH lower bias point, so these issues I ran into don't show up.

[@rcmoot]

Is it auto biased?

[@SkunkieDesignsElectronics]

Cathode bias which some folks also call "auto bias"

[@gjnbouwmeester5860]

Too bad you don't show exactly what you've changed inside with the wiring and stuff... would be nice to see.

[@SkunkieDesignsElectronics]

Patience :) of course I will show all this.

[@hershbagelstein545]

You really prove the point that measurements dont equate to great sound.

[@SkunkieDesignsElectronics]

Right, I've learned a little bit of second order harmonics is nothing to worry about.

[@ohger1]

Try playing Taylor Swift on the amp - if your dogs don't run in front of cars, your design is great.

[@hpfctif7tx7t]

19 dollars!? Sold! 😂🫴💲

[@SkunkieDesignsElectronics]

Huh? I'm pretty sure you are the only one laughing at your comment...