The First Look at my Singer Model 15 for Restoration

A first look at my new model 15 for restoration. Take a tour of the machine as I have never even touched this model before. A few challenges and interesting parts and features.

[@stelladollies]

Hi Andy! Looking forward to seeing this restoration series ... Smiles, Stella

[@andytubesewing1953]

Thanks very much and I hope you'll enjoy it.

[@carolemagnusson5044]

Oh, so happy to see your new series! Roger bought a 15-91 several years ago ($50) at a flea market, which he squirreled away, but now it’s out for me to restore with your tutorials! So I’ve been organizing my tool box to get ready (Yes! I have my own sewing machine tool box!). Boy, is the 15-91 heavy…I have to stand up to rotate it or lay it on its side. My 404 feels like I I could lift it with one finger, by comparison. I’ve downloaded the service manual and user manual. I’m ready to follow you step by step, because you understand how people learn!

[@andytubesewing1953]

And to think you started with a couple of screwdrivers! You certainly deserve your own sewing machine toolbox! BTW, the electric flashlight you helped me build is sitting right on the corner of my bench. I have to keep it handy b/c there is not an arm cover on this 15-91 and I was searching for oil wicks on the machine. That roller system under the feed bar is in the dark too, and I've not done that style before. On my better days, I have been exploring and doing some recording. I have a portable work tabletop so I can edit the videos from the bed when needed. When I do that I feel like the prince of the repairmen, lolling around with pillows and drinking coffee while editing, haha. No matter what, like has its good parts too. "See" you soon then...

[@caper695]

That's a beauty Andy👍 A shame it got beat up during shipping! Glad you're back and looking forward to seeing the videos of this gem👍😁

[@andytubesewing1953]

Yes, a shame about the damage. It does show its age somewhat, but so do I 😉 It's only cosmetic as far as I can tell. I'll be happy to see it stitching again. Thanks so much for watching.

[@marydeignan2183]

So great to hear you again! You have been missed!

[@andytubesewing1953]

Thank you very much 🙏

[@terryjanisch905]

Yeah your back. Missed your voice Andy.

[@andytubesewing1953]

I'm mostly back 😊 My voice sounds "rusty" to me, but the family says no worries. Thanks for tuning in and take care.

[@retasmith409]

Thank you for teaching us about these old beauties. So good to hear your voice.

[@andytubesewing1953]

Hi, Rita. Thanks for tuning in. Teaching on the "fly" and learning as I go.

[@vestart]

So glad to see another video from you - you had me worried. Hope you and your wife are well. I too, have just started a restoration on my older Singer. It's a 66-18 with the crinkle finish; a different model and not as sharp looking as yours, but I had this machine since about 1988. I'm restoring it because it suffered some damage when our house flooded. Thank you for your videos - they are an excellent source of info and help, and an inspiration for anyone looking to restore their sewing machines. Take care my friend.

[@andytubesewing1953]

Thanks for saving that model 66! I've never worked on a 66, but I have all the parts lists and it looks so much like the 99K. I remember that the 99K is a 3/4 size model 66 so maybe you are using that "Cute" playlist? Did your motor get flooded too then? Probably, but it can be saved too. What a nice project for you and good luck. If I can help just let me know. Take care.

[@vestart]

@@andytubesewing1953 Yes, I have used your 'Cute" playlist!! My 66 is (I think) the same as the 99K just full size. The bobbin case had quite a bit of rust, but I used the rust remover you recommended and it worked really well. The motor seems to work just fine too - no damage. All I will need to do is give it a deep cleaning, and it will be back in service. Thank you for sharing your knowledge.

[@andytubesewing1953]

@@vestart Yes, model 99 is a 3/4 size model 66 "more portable" per Singer. Happy you liked the rust remover, too. A nice product. Thanks for restoring your machine.

[@GaryT1952]

My 15-91 is my favorite machine although my 403a gets the most use as it is set up, ready to go in my shop. It is a shame that the case was destroyed, it is a sin the way some folks ship sewing machines...they give no thought to the weight and how they are handled while in transit. Really great to hear your voice Andy, looking forward to this series...nobody does it better

[@andytubesewing1953]

I'm finding out this model is more beloved than I had thought; a true favorite of many sewists. I agree about the packing/shipping. It's not cheap either. The sad part was after I won the bid and paid for it I called the charity store who sold it to me and talked with the day manager. I explained the situation of the iron machine in a wood case and offered to pay extra for them to have UPS do the packing. She was insulted and said they ship this and other heavy items "every day of the week" without a problem. So much for that, right? I can clean anything, but I'm sad about the deep scratch in the handwheel. I've checked the arm shaft closely and feel it was not damaged so I'm grateful for that. Thanks so much for watching my channel.

[@athertonca]

It does my heart good to see that you’re going to be making a series on the redoubtable Singer 15-91. I don’t have one, but I have a 201-2, which satisfies my quota of unreasonably heavy sewing machines. You sound good, my friend, and I hope you and your family are well.

[@andytubesewing1953]

"...unreasonably heavy..." I hear that for sure. Every time I move it around or turn it I involuntarily let out an "ooph" sound. Cast iron. My Singer friends called them "Iron Ladies" which is way more polite than "beast". Thanks for tuning in and the good wishes. 🙏

[@kennethjones5173]

I just read your note: I have a 201, absolutely beautiful stitch. But when it comes to heavy sewing I go to my 1591s. Not as pretty of a stitch but better for heavy work. 1591s were called the farmers machine.

[@andytubesewing1953]

@@kennethjones5173 The Farmers Machine... I like it!

[@debbiecowger4422]

It's so good to see you back!!! Perfect timing, too. I just bought a 15-91 YESTERDAY at Goodwill...for $19.99! I haven't even checked her 'birth date' yet. 😲

[@andytubesewing1953]

Thank you. it's hard to know if it's a coincidence, Karma, or Fate. Good luck with your "new" 15-91

[@terrymcclean4582]

That's a nice looking machine. I've been looking forward to this playlist and will be eagerly following along.

[@andytubesewing1953]

Thank you, Terry. Slowly but surely. Thanks for watching.

[@heidihoglan6756]

Such a BEAUTIFUL machine! Can't wait to see him all fixed up. 👍❤️🤗

[@andytubesewing1953]

Hey! Thank you very much, Heidi! 🙂💖

[@michaelbean739]

Let’s just give ANDY four stars for IKE. WELCOME BACK.

[@andytubesewing1953]

⭐⭐⭐⭐You're very kind, Michael. Thank you.

[@crossstitchgal]

Glad to see you back Andy with this beauty. I have one that I love. She’s so strong and powerful! If forced to choose between my 201-2 and my 15-91 I would keep my 15-91.

[@andytubesewing1953]

Thank you 🙏 I just had an email this past weekend from a viewer who feels as you do about the 15-91. She likes the 201-2 very much, but loves the 15-91 and has had it a long time. Happy sewing.

[@sewterie]

ANDY TUBE!!!! SO HAPPY TO SEE YOU AGAIN. And yes, my 15-91 is my very favorite!!! Sews like butter. Sews through everything.

[@andytubesewing1953]

Thank you! My wife keeps asking "what's taking so long?" She is very interested to sew with it.

[@JonPHX]

Hi Andy! What a pleasure it is to not only have a new video from you, but a new 15-91 series at that! Last year, I found a 1948 15-91 at a North Phoenix Salvation Army complete with cabinet and accessories for less than $50.00! I call her 'old girl' and she's my first vintage machine. She runs great, but I'm excited to learn along with you how to ensure she stays in tip-top shape. I'm especially eager to learn about the grease ports, wicks, etc as I have yet to tackle this. (She'll probably need rewiring at some point, too.) Welcome back and many thanks for your wonderful tutorials and this new series. Looking forward to your future uploads! Take care!

[@andytubesewing1953]

That's a great find! Greetings to "old girl" from "IKE", haha. That's a wonderful model to find at SA, Jon. Lucky dog, you. 👍

[@meganmills6545]

This is so exciting Andy! She is a very nice looking machine (despite her recent traumas) and one I know virtually nothing about. I'm looking forward to every episode and just so delighted to see you back. You sound great - and it is great to hear your lovely voice again. Edit - Oops - I mean "he is a very nice looking machine". I forgot you introduced him as "Ike"!

[@heidihoglan6756]

I think you have a lovely voice too ❤️

[@andytubesewing1953]

I don't know much about it either, but I'm having a good time playing with it. Still one more of the 4 oil felts to find, haha. Thanks for the kind comment and see you again soon...

[@andytubesewing1953]

@@heidihoglan6756 Aw shucks... thanks very much miss. That means a lot to me. Take care and say howdy to your dad.

[@kennethjones5173]

I knew you would get around to the 15s. My original machine was a 1590. I've had it for 55 years. All of my mountain climbing gear was sewn on it. The 1591 has even more power. I just love them. Thank you for these videos.

[@andytubesewing1953]

Your 55-year history with the 15-90 is a great testimonial. I never thought I'd be doing a 15, but seeing Shelley's 201 & 15 results was the tipping point. Thanks for watching my channel, Kenneth, and let me know if I screw up 😀

[@moiraberniegatt9491]

Hi Andy, so lovely to see you talking to me about my machines again 🤗. You taught me so much working through my 15K and 201K. What is really interesting is that the 15 you have is a real mix of my 15k and my 201k. My 201k can drop the feed dogs but not on the 15k. Also, there is no reverse on my 15k either. My 15k tension dial also has no numbers. The timing WAS set in the factory. I've been loving both machines and using them regularly since our first lock down. I've just altered an expensive leather jacket on the 201k and it sewed it like a hot knife through butter. The lift on the 15k isn't as high as on the 201k. The harp in the 201k us also so much bugger than on 15k so I can free sew a quilt on it as the feed dogs drop. Both resistor pedals burned out within minutes of switching them on and both motors had melted wiring. Neither were potted motors of course. I removed the lights off both and use LED lamps as they are much more functional for what I need. I tried renovating the resistor pedals but the carbon disks and connections were just too shot and they both started sewing on their own when they overheated and made connections. I replaced the motor, foot pedal and belt with a YKD from Amazon. Really controllable speed but as with any resistor it will get warm if doing a lot of stop start sewing. Anyway...SOOOO lovely to hear your fabulously soothing voice once more.

[@andytubesewing1953]

I think you could teach us all with a 15K vs 201K comparison! I love hearing you use them so much. I've heard from other viewers about the YDK replacement set-up and they all were pleased with performance. One fellow made a "hot pad" slipper so he could keep sewing when the pedal gets hot. He understands the pedal will wear out sooner, but plans to get an electronic pedal when it does. Thanks for watching my channel.

[@moiraberniegatt9491]

@@andytubesewing1953 you are a star. 🤗

[@moiraberniegatt9491]

Andy you tried to help me fix a SINGER slantomatic 601 but although I fixed it, every time I used it the mechanism got jammed and I really cant see any reason for it apart from wear and tear on the cogs. Despite removing and cleaning them, they just jam. Could that be it? Is that possible? I believe it had a good 50 years of use. I've given up on it now and sticking to my lovely 15K and 201K. Who needs a zig-zag anyway 🤣. It possibly needs a real technician. Not me. Hey ho.

[@andytubesewing1953]

@@moiraberniegatt9491 🙏

[@andytubesewing1953]

@@moiraberniegatt9491 Is there a model 601? Did you mean 401? I know of model 600. Cogs = gears? I'm confused here. 😕

[@tumanskychikov7255]

Guys like Andy should live for a 1000 years . so much infomation they have thatl be lost forever

[@andytubesewing1953]

What a kind comment; thank you very much. I'd be happy with 5 more years if I can get them. For those interested in the Model 15-91 here is a playlist of the rehabilitation I did: kzbin.info/aero/PLsCOZgzzaiKJftyGwzdDiWa9R6HFEACJo

[@tracylynnw]

I got my Singer 15 at a yard sale for $15.00. It was missing a light, I got it serviced and a new light put on. It truly is a sewing champ! I’ve done free motion quilting, darning, embroidery. She makes such a satisfying sound going though thick layers…thud thud thud, and keeps on trucking along. I swear I could sew a house together with it 😁.

[@andytubesewing1953]

It's quite a machine, isn't it? Sew a horse??? If the horse was standing still you may be able to do that! 🐴 Thud, thud, thud... a beautiful sound!

[@tracylynnw]

@@andytubesewing1953 haha 😂

[@ronalddevine9587]

So wonderful to hear and see you again. ❤ I have missed you. Hope you and yours are well. Dude, you stole this machine. I bought a Japanese clone and had similar issues. People just don't know how to pack. I have done several 201-2s, same motor. Love the sound. Take the motor off and rewire. This is critical as I'm sure you know. That machine looks like it was used very little, or was extremely well cared for. Can't wait for the next installment. Stay well 🙏

[@andytubesewing1953]

I'm happy with the price after the refund but wished they had not damaged the handwheel. I need to ask friend/viewer Shelley where she bought the touch-up paint. I can't find the picture she sent me with it. I have the motor off, but only to work on the rest of the machine. I've bookmarked several blogs and videos about the rewire, but I'm not convinced it will be required. Of course, once I open the motor I may change my mind about that, haha. Having too much fun with the rest of the machine and treasure hunting for all the oil wicks on the darned thing. I appreciate your tuning into my channel, Ronald. Thanks so much.

[@antheadelahay5948]

Hello Andy, Just want to say a very very big thank you for all your amazing tutorials. Love the way you let us see close ups of certain areas and explain everything in an easy going manner, which is so easy to understand. I have started to collect Singer sewing machines over the last six months. I now have 12👍 including a model 15, 201, 221 and a 12k. I think each one is an amazing work of art. Some need slight attention, but I am confident that your tutorials will help me to do this. Thank you once again, from a very happy subscriber living in the U.K.😘

[@andytubesewing1953]

12 machines is a herd! Congratulations and what a nice collection. Thanks for the kind words concerning my videos. I appreciate your Sub. and that you watch my channel. 🙏

[@heidihoglan6756]

This machine is so gorgeous!!! Beautiful lines. I can't wait to see your progress. So happy to see you making videos!

[@andytubesewing1953]

It's a very classic look, isn't it? I've already found things new to me compared to the 99K for example. Thanks for watching ❤

[@deweygross2968]

Glad you are doing this series. I have 2 of the 15-91's. 1 is in a cabinet and other in a case. 1 sews great and the other needs some tweaks. I have been working on them for a while, but learned several new things already from your video. Looking forward to learning more.

[@andytubesewing1953]

Thanks for watching, Dewey. I've heard good things about this model for years and I'm beginning to learn why.

[@sewterie]

Thanks for showing this one. I have a 15-91 and of all the machines I have, all vintage, it is my favorite. It edges out my Red eye Singer 66, which is another awesome Singer. My 15 is from 1949. My 66 is from 1919. Keep your videos coming. I know this is an older one. They are all so valuable. Stay well Mr. Andy.

[@andytubesewing1953]

You have some wonderful machines! I'm impressed by the engineering and build quality of the 15-91. Of course, it makes a beautiful stitch, too. I appreciate your pleasant comment. Thanks for watching.

[@mjsews]

So, so glad to see you making videos again, it makes my heart happy to know you are doing okay! ❤ And working on a 15-91 too! I love my Singer 15s, (a 15-91, a 15-88 treadle, and a 15-91 that had super scary wiring, so I converted it to a handcrank) These machines make a wonderful stitch and are great for free motion quilting. 15-91s are fast too! My 15-91was made in Canada and has JC serial number, there are no detailed records for Canadian machines but it's estimated they date to the late 1940s. I'm really looking forward to your exploration of this classic machine. Take care, Andy! P. S. As you may know by now, the hollow presser foot bar used to contain an oil wick. 😉

[@andytubesewing1953]

That's like a trifecta of model 15s! I hear more and more of the beautiful stitch, too. Yes, I've ordered some new wick cord and have found 3 more places it is supposed to be on the 15-91. I had no idea.

[@jessirarara]

Looking forward to watching this series! My grandmother and I just had the discussion a couple days ago that I love vintage crafting tools. Then she drops the bombshell that she has a vintage Singer in her basement that she was planning on taking to the dump (it has no peddle and the wire for the light is ripped off among other things). I just got done posting about it on a sewing group and one nice lady directed me here. I'm gathering all the info I can to hopefully bring that beautiful machine back to glory!

[@andytubesewing1953]

Man, what a close call! Thanks for saving that machine. If it's a model 15-91 I hope my videos can help and thanks for watching my channel.

[@mrruggles7587]

Fascinating--thanks. I'm the original owner of a 6235 & changed all the gears and belts in 2020. I have to re-set the feed & timing but hampered greatly by my rheumatoid arthritis. You've inspired me to keep going (slowly) until I get this beloved machine working again. Welcome Back AT!

[@andytubesewing1953]

You can do it! changing the gears and belts is a project, so congratulations on that. Easy does it now, and thanks for the nice comment and for watching my channel. 🙏

[@justinstott9565]

Thanks for the video! Nice to see you posting! I have my grandmother’s 15-91 from the spring production run of 1953, and I picked up a “free sewing machine in need of repair” from a local online listing. It was a 15-91 from the same production run! My grandmothers is well maintained and still in original operating condition without needing any service at the moment. They are both cabinet models, and I have the sewing bench with my grandmother’s. It has a lift-off bench for storage. The freebie did have the crumbling insulation on the wiring, so I did a tear down and rebuild on it, and I would recommend not removing the potted motor unless you absolutely have to, and it sounds like yours is running just fine! The one I picked up from a neighbor still had the decals bright and shiny with no slivering from wear much like yours. Whoever had that machine didn’t sew very much. My grandmother’s has some slivering on the decals from all the yards of fabric that she ran through it, but I don’t mind, that actually makes it more of a treasure to me. I enjoyed the challenge of rewiring the rescued 15 and refinishing the cabinet, and was able to donate it to a budding stitcher, and I learned all I could possibly need to know to keep my grandmother’s running for the rest of my life along the way. If I’m not mistaken Singer did two production runs of 50,00 model 15’s in ‘53, one in April, and one in October. It’s a pretty indestructible model. They’re one-trick ponies without the addition of zig-zaggers or buttonholers, but they do their one job very very well. Prettiest straight stitch you’ll ever find, and both of mine ran at about 1,200 stitches per minute. They’re tough enough to sew leather, and you’ll never have to replace a belt with the potted motor. Have fun with yours!

[@andytubesewing1953]

thanks for recuing that machine and especially grateful you gave it to someone for use. Nicely done. IKE has some scratches, but the metal all looks in great condition. The parts seem awful dry, like it never got much use. I will enjoy, no worries for that. Thanks for watching and the informative comment. Take care.

[@justinstott9565]

@@andytubesewing1953 just so you know, you’re personably responsible for at least a half dozen machines that I have rescued before they hit the landfill, restored, and rehomed. During the shutdown I was able to provide reliable machines to nurses making masks for hospital staff when there were PPE shortages. I think you restored an early ‘70’s Singer Stylist sometime back. The one I restored, with your videos as my go-to when I knew I was past my experience level, did over 1,000 masks for hospital workers when they were in short supply. That’s proof positive that there’s real value in restoring these things. It’s not just that they’re marvels of engineering and design, they really have practical applications where they can be beneficial to society. Thanks for the education! Keep up the good work and enjoy your 15! (just don’t pull that potted motor if it’s running well and you don’t have to, trust me, it’s an exercise in frustration!🤣)

[@andytubesewing1953]

@@justinstott9565 So happy to hear this, Justin. I'm pleased when anyone keeps or returns to service a vintage machine from watching my channel. Fantastic you've done so many. Thank you 🙏 As to the motor... well, too late. It's the first thing I did so I could work on the rest of the machine. It's my next video in the series.

[@MichaelRiosOrigins]

Glad to see you restoring a Singer 15-91 July 10, 1953 made in Elizabeth New Jersey. My wife's (Deb) Aunt who is also my 8th cousin once removed recently gave us a Singer (Family Heirloom) 1910 Red Eye (Redhead) 66-1 Class with original treadle cabinet and the 15-91. My heart sank when I saw the damage glad they compensated you. My 15-91 light is missing the cover completely but works. (From what I saw in the video I believe you have all the parts needed to reassemble yours). I will have to get a new one, as well as the spindles and a missing bobbin tire on both Red Eye and the 15-91. Will be looking forward to your videos, and stay healthy!

[@andytubesewing1953]

Wow, you did get some treasures there. I think I do have all the lamp parts, but have not tried it yet. I know the older model 15 have a longer, metal lamp shade and I'm glad mine had the molded plastic. I think it is just going to slide and press together, but I'll be doing a video for it no matter what I fand. Thanks for watching and my best to your family.

[@FrontierKampers]

The 15-91's are great machines! Looking forward to this next series.

[@andytubesewing1953]

Thank you for watching.

[@SimplyThirdStreet]

I have one of these, a 99, and a Featherweight. Wonderful machines!

[@andytubesewing1953]

Totally agree and I have worked on both of those. I chose the 15-91 due to the potted motor as I've never worked on one before. Thanks for watching.

[@ahmadmjadamy3681]

Thank yuo mr. Andy

[@andytubesewing1953]

👍😉

[@maria2400]

Great video. So glad your back.

[@andytubesewing1953]

I'm glad you're watching, Maria. Thank you 🙏

[@kathydias5070]

I’m so glad for this series! I’ve got one of these to do and need your guidance, you’ve already helped me with a 404 and two 301’s. You’re helping to save a bunch of wonderful machines!

[@andytubesewing1953]

Nice to "see" you again Kathy. 😉 Thanks for supporting my channel with your viewership and for saving so many great machines.

[@janevacani6789]

Lovely to hear you again! That machine makes a lovely sound 😊 I have a 15k80 I haven't touched yet while I have been restoring others. I'm encouraged to start on it now that you are doing yours! She is different to my others due to the tension assembly etc, so it will be interesting to try something new.

[@andytubesewing1953]

thank you! Hope you'll enjoy the series. Take care.

[@bayfilly1]

Nice to see you back on KZbin! A year ago I found a 15-91 from 1949 in an old box at a garage sale just labeled "NOT WORKING",,,, but cosmetically near factory original and only paid $7.50. Spent more than a month doing an entire re-wire and motor refurb. Then a serious lube, polish and wax top-to-bottom. It easily ranks in the top 5 of my 27 machines.

[@andytubesewing1953]

Talk about finding and unexpected treasure! I love this and thanks for sharing, and for watching my channel.

[@tobis1546]

Tom I need some guidance on the rewire. The 3 prong wire on my new vintage needs replacing, been hard to find a good quality wire (home depot is not good for this). Can I buy a sewing machine wire already made on amazon for the newer machines (It has a red and black wire) and then add the 3 prong for my sewing machine to it? I believe the singer has a white and black wire (no red).? TYIA

[@billj139]

Nice to see you back Andy. Your videos taught me sewing machine repair last year. Glad to see you are trying a real vintage machine. The 15-91 is my favorite domestic model. It can sew heavy and has a 1/2" presser foot lift, more than many industrial machines.

[@andytubesewing1953]

Thank you for watching and for repairing the machines. I didn't realize the foot had that much lift; nice. The more I work on the machine, the better I understand why so many people love it.

[@heathermcgrath7236]

I was gifted one of these. I learned so much from your video and am looking forward to seeing the rest of them.

[@andytubesewing1953]

Thanks, Heather. That's a very nice gift to receive. A marvelous machine. kzbin.info/aero/PLsCOZgzzaiKJftyGwzdDiWa9R6HFEACJo

[@jomercer21113]

How exciting! I'm glad you got it with no more damage that it had.

[@andytubesewing1953]

Thanks, Jo. I guess I am lucky it did not get more damage from the flimsy packing.

[@bobrossaholic6615]

YOU RULE AT!! Thank you for such an informative and all encompassing vid and walk through!! It was GREATLY NEEDING! Your soothing voice , calm presence reminded me of THE MAN - BOB ROSS!! Your closing statement was sentimental and heartfelt EVEN TODAY!! 🇺🇲🫡🖤

[@andytubesewing1953]

To even be mentioned in the same comment as Master Bob Ross is an honor, thank you.🙏 I enjoyed your comment today and hope you stop by in the future.

[@JebbAdams]

Good choice of machine! Good job Andy!

[@andytubesewing1953]

Thanks for watching, Jebb. So far it is an impressive machine.

[@JebbAdams]

@@andytubesewing1953 Hi Andy! I am just watching your 403A playlist. It's all good! Lol!

[@andytubesewing1953]

@@JebbAdams Oh, Regina? I sure enjoyed working on her. One of the machines that makes me wish I knew how to sew. I watched your Season 2 Episode 1 video. That's a very nice "herd" of machines you have there!

[@JebbAdams]

@@andytubesewing1953 Thank you Andy! Yes a little herd, but the others will arrive soon. I am going to enjoy you watching working on the 15. I have 2 of them in the other herd! Lol!

[@andytubesewing1953]

@@JebbAdams Other herd? I get that. I used to run about 20 machines per year. 3 or 4 up for sale, 1 or 2 on the bench, and the rest in "sick bay" waiting for diagnostics and service, haha. Never less than 8 machines. Those were the days.

[@modgranny]

This is so wonderful! I just found one today in a cabinet on sale. I couldn't resist as I needed the cabinet. Thank you for your thorough explanation! Your machine seems wonderful, amazing! I love Singer!! I have two much older Singers hand crank styleo (one is the Egyptian and the other the Red Eye). Had no trouble getting both of those up and running with just oiling. I'm optimistic with the new Singer 15 machine purchase.

[@andytubesewing1953]

Thank you. A strong machine. Here are my other 16 video for the machine> kzbin.info/aero/PLsCOZgzzaiKJftyGwzdDiWa9R6HFEACJo Thanks for watching my channel.

[@kjcfalcon]

I just found a 1951 15-91 last week in Kansas and was delighted that she "worked" in the store, though does not yet sound anything like yours. I am eager to get her up and stitching as well as learning more about how to do that through your great videos. How fun to learn with you! Thanks for these vids.

[@andytubesewing1953]

Congratulations! I'm impressed with the quality & strength of this model. As I remove parts and work on more areas of the machine it just keeps getting better, and I have not even touched that potted motor yet! Thanks for watching my channel.

[@henrybangsberg2187]

I found a Kenmore model 21 in the alley behind my house. It's a side load like the 15, but has zigzag so it has to move the bobbin case and shuttle to match the needle. All your videos are so helpful with Singer machines and I am always recommending your channel whenever someone asks me about working on their old Singer.

[@andytubesewing1953]

Thank you very much. I restored one Kenmore machine. It was a well-made model but very hard to find replacement parts and documents for it. After that, I've just stayed with SInger Machines. Thanks for saving the machines you do, no matter the brand, and for watching my channel.

[@historygradstu]

Always great to see a 15! I have two 15' RAFs from kilbowine, both handcranks one is 1940 and the second is a centennial my mother brought over on a converted liberty ship when she came to the states still have the hand crank and the electric motor conversion. If a motor is on them , I'm kinda partial to the external motors with the belt drive...so much easier and cheaper to work on than the potted motor

[@andytubesewing1953]

Boy that's some great history in those machines. They are treasures so happy for you to have them. Thanks for watching my channel

[@roosterwilson9371]

Great to see ya at it again! I have 3 of these machines and have redone 2 of them. You will really like this machine, Yes the potted motor usually needs a rewire and cleaning. Look forward to your videos on this one

[@andytubesewing1953]

Another viewer with first-hand knowledge of the 15-91. Thanks for the input and I may be begging for help in the future, haha. I've dismantled a lot of sewing machines, but I'm impressed with some of the parts I'm taking off here. I'm starting to understand why so many of these black Singer machines are still in service. Thanks for watching, Rooster. Take care.

[@r.duroucher225]

Delighted you've got a 15 to work on. One of my favourites. I restored a 15-90, the same model but with an outboard motor. Mine was rusted solid and it needed to be rewired and the foot pedal carbons cleaned. Brining the machine back from the great beyond was great great good fun. The presser bar originally had a wool felt plug in it to allow oil to seep down. You'll find a felt plug on the right side of the machine at the top and a cotton wick in the fork mechanism on the right on the bottom of the machine. All for oil. The motor on these used two grease wicks, the grease, as you know is no longer available unless you use the Fetherweight Shop grease or regular petroleum jelly. These used an "eleven o'clock" bobbin case as did the 15-90. Other 15's used a "one o'clock". I understand that the eleven system was a better one, but that it didn't catch on because by the 1950's Singer had made so many of the one o'clocks. A truly fabulous machine and I'm really looking forward to your videos!

[@andytubesewing1953]

AHA! 💡 So it's in the Fork bottom right. No wonder I've not been able to find the darned thing. Thanks so much, and thanks for watching my channel.

[@r.duroucher225]

@@andytubesewing1953 The one in mine had deteriorated so much that threads of it were blocking the movement of the fork. I thought it was thread or lint build up, that it until I started tugging on it, and out came something like maybe about an inch or so of cotton wick. It came out in rotten pieces, but no mistaking what it was. It looks like yours is missing the woof felt wick in top of the hollow presser bar.

[@andytubesewing1953]

@@r.duroucher225 Thanks and yes, IKE is missing some wicks/plugs including the presser bar one. Not for long as I've ordered some wool wicking cords.

[@clementihammock7572]

Black Singer is Vintage and Beautiful, and lasting memory of an mechanical art piece.

[@andytubesewing1953]

They are impressive machines. They seem to last forever.

[@Paul.Douglas]

Awesome Andy! 15's are great great great machines. I have 3 of these guys, all potted motors. 1 is waiting resto, so I'm really looking forward to this. The other 2 I bought in usable condition. They are excellent stitchers. I keep one set up for denim, and one for regular sewing. I think you'll enjoy working on this.

[@andytubesewing1953]

A trifecta of 15s! You are ready to sew. My wife always has her 301A and her 403A setup with her serger sitting between them. People who know, sew. Thanks for watching and take care.

[@timravo5152]

WOW! GREAT to see you back! ;-)...Hope you are doing ok...Missed ya!... I think there should be a felt pad inside the presser bar thumb screw that you can put a drop of oil onto and it seeps through...I have a couple of Singer 201K ( like New) one from Dec 1937 and the other from 1938 and they both have the felts in there and they are all basically the same...You will have fun restoring your new project...And I will enjoy tuning in to watch

[@meganmills6545]

I've got an old Singer 66 from about 1916 and it has the hollow pressure control knob/screw so that the presser bar can travel up and down within it. It doesn't have the felt (it would be pushed out if you put one in) and you're just meant to pop a drop of oil in from time to time. So I know they can get by without one. I guess a clue as to whether this one should have the oiling felt is how far the presser bar travels up and down within it. I shall wait with bated breath to see what Andy's does... :-)

[@timravo5152]

@@meganmills6545 I also have a Singer 20U Industrial machine and that has the same thumb screw ...With a felt in it....As your machine was 21 years old before mine were born anything could have happened, it`s a bit of felt not a gold coin... Anyway I`m sure Andy will find out ;-)

[@meganmills6545]

@@timravo5152 Hi Tim - yes I know what you mean. They changed and improved little things here and there over the years quite a bit. I think the "tell" will be whether when the pressure adjusting screw is down as far as it goes. If raising the presser bar doesn't push an oiling felt out in that position there's no reason not to have one. It certainly makes oiling the presser bar easy, almost continuous and mess-free. My particular machine can't have one because every time I raise the presser foot the felt would get ejected. Otherwise I'd be happy to give it one (if I could find one to fit).

[@andytubesewing1953]

@@meganmills6545 I have most of the parts lists for the different versions of model 66 and they appear to show the presser bar above the top of the pressure control knob as you say, Meagan. If you can read my reply to Tim, you'll see I did find a part on the list of model 15-91 for a felt plug that sits inside the thumbscrew below the top but above the presser bar. I've ordered some felt cord to try it out, but I'm in line with your thinking it is to keep the presser bar oiled without dripping the oil down onto the foot and fouling the fabrics. I'll be doing a video once I figure out what's happening with it. You're the best, Megan, and thanks for sharing on my channel.

[@marciaelliott8440]

Hello Andy, Good to hear your voice . . . even at 1.5 speed. This will be fun. I've refurbished a half dozen potted motors on 15-91and 201 machines. I think you will find grease wicks that are black and hard as a rock. The motors seem to run fine even in this condition but I'm sure that replacing the wicks, cleaning and replacing the grease in the cavity around the worm gear will extend the machine life by years maybe decades. It is a messy job that takes awhile and there is an ongoing debate about using either "special" grease or vasaline. All about the melting point. I have some thought I will share when you get to the motor rehab sessions. Thanks again, and again, and again for all of your helpful videos. You are the best! Martin (and Marcia)

[@andytubesewing1953]

Thank you, Martin. It's an adventure for sure, and I'm not as fast as before, but hope to have fun with this machine. I've always enjoyed the differences between the models so the potted motor is intriguing. I'm glad you're watching and regards to Marcia 👍

[@thomasgronek6469]

Gorgeous machine

[@andytubesewing1953]

Very unique model. I enjoyed working on it. kzbin.info/aero/PLsCOZgzzaiKJftyGwzdDiWa9R6HFEACJo

[@alicebee4768]

Learned a lot abouy all my model 15s (have a couple plus a clone)

[@andytubesewing1953]

Thanks for watching

[@vsmetc7305]

Glad to have you back Andy. Missed you. I hope you are well. I have 5 of these machines. 2 have been restored and work well but I know I will learn a great deal from you. I have another one I could restore and I have 2 machines in not great shape for parts. The restored machine that I have in a cabinet I call “Black Beauty”. It is a workhorse! Rewiring and cleaning out the motor and gears and wicks feels rewarding. The machine is quiet and speed control is very responsive. I will be watching every video in this series.

[@andytubesewing1953]

Thank you for watching. I have taken a peek at the pinion gear behind the handwheel. Whew! That's a lot of black grease in there! The pictures from Shelley sure looked different, haha. I'm wondering what grease people used on the wicks and gearing? Greetings to "Black Beauty" from "IKE", and take care.

[@vsmetc7305]

I used petroleum jelly- Vaseline. Some respected folks say it is good for grease on wicking. I bought new felt wicks from McMaster-Carr. Only place I could find it. Bought 5 ft. Only need a few inches of this material. I could send you some if u want. I’m from Ontario Canada.

[@andytubesewing1953]

@@vsmetc7305 Thanks for letting me know. I've ordered the wicking b/c I've found other places on the machine where wicks are used. I've sent some wicking to friends b/c of the 5-foot minimum, haha. It's kind of you to offer and reply to me about the grease. Thank you.

[@randyc8171]

Nice condition - good deal on it.

[@andytubesewing1953]

Thanks, I'm happy...

[@susanhawkinson5358]

Thank you for your videos. I am suddenly obsessed with the old singers. A friend sold me a knee bar 99, with the bent wood case. I found one in the tan box, I'm working on for a women's group. Then I remembered I have my grandma's in storage, which is a large one like this,,, it's in a cabinet. I need to know how to identify the models. I love the 2 videos of yours I've seen tonight. Thank you.

[@andytubesewing1953]

Happy for you to be beginning such a fun journey. Most of the Singer models have the model number listed on the upright/vertical section of the machine. Most will also have a serial number stamped/etched into the top of the bed at the base of that upright or on the bottom/underside of the bed.. If you don't see a model number you can look up the serial number here: ismacs.net/singer_sewing_machine_company/serial-numbers/singer-sewing-machine-serial-number-database.html You can also look at this picture gallery that shows many of the models: www.singersewinginfo.co.uk/gallery_machines If you have a smartphone you may be able to do a "picture search" and find the model on the internet. Once you find the model number you can search online for it, first in images then in "all". You can still download a free copy of the instruction manual for almost every SInger made in the USA, EU, and some South American made Singers. Just go to this SInger Support page and enter the model number in the search box (without letters, just use the number): www.singer.com/support Here is the page of manuals you will see if you enter "99" in the search box: www.singer.com/search/support?title=99 You see that any Singer with a 99 in the model number will show up. Most of those are Industrial models but you also see 99-13 and just model 99. There are more sources online but the above should get you started. If you are interested in my channel then please bookmark my home page: kzbin.info/door/USPDsHaFtRoz1VA2U1xJ4wfeatured On the first page I have listed groups/playlists and the first is by model number, the next by machine part type, like needle bar. I've tried to make it easier to search through my 600 videos. Although it has been many years I remember the fun I had first wandering into the world of Singer VSMs. What a blast I have had over the years. Oh, if you use social medial you can find many "groups" such as on FaceBook for vintage Machines and vintage Singer Machines. I don't use them but I know the folks on these groups and forums will go out of their way to help you. Have a wonderful 2023, Susan, and thanks for watching my Andy Tube Channel.

[@graymaquilter9641]

@@andytubesewing1953 Hey, Andy! Was happy to see you here, been thinking of you a lot. Sending prayers your way always! I am going to have to delve into these Ike videos one of these days.. Take good care…Jonee

[@engelbob8402]

Hi Andy. I just bought a 15-91 at an estate sale a couple weeks ago. I will be watching everything you post about this machine. Mine came with a box of attachments which I will also need to learn about. I am new to the vintage hobby and know practically nothing about sewing. Something jumped out at me about your bobbin case. The bobbin case in my machine has the locking arm at the 9:00 position, however, two extra cases in the accessory box have the arm at the 3:00 position. I hope you learn why this is so and alert other newbies to the different designs. I don't know how to order one or the other should I need another correct (9:00) case. Just wanted to share that and thanks for all you do for us newbies.

[@andytubesewing1953]

Welcome to AndyTube and the world of VSM (Vintage Sewing Machines) I have to say you picked a real winner for your first machine. It's a beloved workhorse that can last forever with proper care. I can't say anything about the 3 O'clock bobbin cases. Your bobbin case (9 O'clock) should be part #125291 and if you Google "Singer Model 15-91 Bobbin Case" you will find dozens of sellers for it. I think they are probably made at one or two factories in China and they cost under $10 unless you order directly from a seller in China for much less. They are newly made b/c it is such a popular bobbin case that fits a number of Singer models. You can sometimes find original vintage cases for sale on eBay and other such sites if you prefer, although they will cost more. Here is the entire playlist of my videos for restoring a model 15-91 kzbin.info/aero/PLsCOZgzzaiKJftyGwzdDiWa9R6HFEACJo I finished everything except the motor before stopping for health reasons. There are many motor videos as well as channels with 15-91 videos. You can buy a copy of the Adjusters Manual online if you like or download a free one here: www.manualslib.com/manual/1027731/Singer-15-91.html just be sure to download the manual and not a new browser, haha. You can also download a free copy of the Instruction Manual from the Singer Support page here: www.singer.com/search/support?title=15-91 Enjoy your "new" SInger and thank you for rescuing it. I hope it leads to many enjoyable hours and the desire to find and restore other models. Take care and good luck.

[@rafaelmunoz21]

Andy, so glad to see you back with another video and I hope your health is improving. The only comment I have and I hope you consider the options. What would you do if you have a failed potted motor? These motors are harder to find and if you just need an armature that can be problematic. This in my opinion is currently the weak point of all the potted motors. Do you have any recommendations or considerations? Thanks and take care.

[@andytubesewing1953]

I don't know what the fail rate for the potted motors is. From what I've seen so far I think it would be a low percentage, but sure, all motors can fail. There are aftermarket YDK motors for many Singer models, but the potted and PA motors are only available as used. I do see at least four 15-91 motors for sale online at the moment, including a restored/rewired one. Oddly enough I also see the same amount of used 401A motors available. For me, the changes of totally blowing out a motor like this would be low enough that it would not prevent me from owning a 15-91 or 201-2 model. Thanks for watching, Rafael. I hope you'll enjoy the series. Take care to you & yours.

[@ninjananagardner7672]

On the hollow presser bar thingy , on most of my 15-91 I have found wool oil wicks in the hollowed out part , to keep it oiled safely I guess

[@andytubesewing1953]

Thank you for watching my channel. You are correct about the oil wick in the presser bar pressure adjusting thumbscrew. I've made a video about it now kzbin.info/www/bejne/gp2ZdIqPpZxjZqc The entire Playlist for my Model 15-91 will be here with more videos added as I make them: kzbin.info/aero/PLsCOZgzzaiKJftyGwzdDiWa9R6HFEACJo I appreciate your sharing of info on my channel.

[@Youtuberkit7]

Just bought in Craigslist in very good condition had everything with papers sell on 1953 had lots of accessories with table. We’ll keep. I’m so lucky bought it for $50.

[@andytubesewing1953]

Fantastic find! Congratulations. Do the papers happen to mention the selling price? Many folks say that if the 15-91 can't sew it then you need an Industrial Machine. kzbin.info/aero/PLsCOZgzzaiKJftyGwzdDiWa9R6HFEACJo Happy sewing

[@Youtuberkit7]

Yes. She bought it on January 10, 1953. Amount of $ 267.50. She put downs some money for monthly payment $10.90/ month I am collecting more like this kind of sewing machine till they ran out. Very nice sewing machine.

[@andytubesewing1953]

​@@KZbinrkit7​@KZbinrkit7 oh my that amount in 1953 is equivalent to more than $3,000 today so imagine you bought a $3,000 sewing machine for 50 bucks it's incredible I'm not sure anyone could even make that same sewing machine today happy for you my friend enjoy

[@Youtuberkit7]

I’m so happy to own a bulletproof sewing machine that will pass it on to my grand kids

[@KevinCoop1]

Back in 1978 through 1980 I worked at a Singer store as repairman. Didn’t work on very many of these as they almost never fail. She is a beauty! Suggest you hit the peddle and open her wide open and let her heat up. I had to do that to a lot of them. They get very sluggish if they are always run slowly. She was made July of 1953. Use Windex to clean it up! Don’t over oil it. Best wishes, Kevin

[@andytubesewing1953]

Thanks for sharing the tips. Interesting about the Windex as I was told it "silvered" the gold decals. I'll be removing most of the parts but I did add fresh oil and run it on high for about 5 minutes. It slowly got faster and quieter so good advice on that. After I clean and reassemble a machine than add new oil/grease I do run it on high for a few minutes. Even on a newly degreased machine that high speed run seems to "settle" the machine. Thanks for watching my channel.

[@chilipeprsandi]

Thank you both for teaching me how to use my 1953 Singer! I have been running her on high speed and she is working excellent! Andy, with your help my machine has been running very well. 💕💃🏻 ps. Gifted machine from mother n law 😁

[@KevinCoop1]

@@chilipeprsandi They do work better if you get them wound up. That is how I tested them after repair completed. I always put gold band needles in too. Back then, they held the thread out from the needle so the hook could get it easier. Not sure any more, too long ago. Best wishes, Kevin

[@andytubesewing1953]

@@chilipeprsandi COngrats. Your M-I-L may want that machine back if she sees how nice it is now. Thanks for saving it. Good Luck.

[@ralphwatten2426]

Ike was a dapper gent when he was younger but a little worse for wear. I hope you can do resto vids like in the past. I wonder if all the model 15s had reverse? I wonder about parts availability and if Featherweight parts fit. Nice to hear from you again Andy. Thanks for posting.

[@andytubesewing1953]

Thank you for watching, Ralph, I see vintage parts available from online sellers and new bobbin cases are also there. I had not thought about the featherweight parts. Looking at the size differences and different hook styles I don't think they share many parts. I will be doing restore videos and covering the different parts.

[@ralphwatten2426]

@@andytubesewing1953 Thanks Andy. I've been using my 503 a bit lately. The restored carbon disc foot control works better than the electronic I purchased, so the videos on the controller is a big help. I look forward for the tour through the m15.

[@andytubesewing1953]

@@ralphwatten2426 Glad the videos were helpful. My wife prefers the original foot controllers on her 301A & 403A. I used the new electronic controllers on other restorations I sold.

[@buddikarathnayaka5020]

Superb

[@andytubesewing1953]

That is kind of you, thanks. Here are all my Model 15-91 servicing videos: kzbin.info/aero/PLsCOZgzzaiKJftyGwzdDiWa9R6HFEACJo Thanks for watching my channel.

[@janevacani6789]

I would be interested on your thoughts in future videos about how to adjust the needle height. I have a 15k80 made in Kilbowie, I've just got her cleaned up and shiny but upon trying a test stitch she is not picking up the bobbin thread. I thought, oh no! i'm gonna have to adjust the timing hook but it looks like that's not possible if it's not adjustable underneath as you pointed out.

[@andytubesewing1953]

Thanks for watching my channel, Jane. Here is my playlist for this 15-91 that will contain all the videos I make for it. kzbin.info/aero/PLsCOZgzzaiKJftyGwzdDiWa9R6HFEACJo In the playlist you'll see that the video I release yesterday is all about the needle bar kzbin.info/www/bejne/b5XCYXqhj8aDmsU If you're not familiar with my recent videos I'll let you know that they are divided into chapters, and if you point at the timeline below the videos you can see the chapter names. For example, the chapter for setting the needle bar height begins at the 28:20 mark of the video. Hope that will help you check/set the height of your to see if that's the cause of your problem. If you need the instruction manual it may be available for free from Singer on this page: www.singer.com/search/support?title=15

[@janevacani6789]

@@andytubesewing1953 Thank you so much for the info, I missed the fact that you had released the latest video for the needle bar!! I will watch it tomorrow and hopefully it will solve the issue, as your videos always do for me! I appreciate your help again, Andy 😊

[@andytubesewing1953]

@@janevacani6789 No worries and I hope it can help. Thanks again for watching my channel.

[@puzzles2me]

Andy! You have a video or recommend a friend for a Singer 66.... my hubby just gifted it to me, another great find at a thrift store! Let me know, hope your doing well🙏🏻

[@andytubesewing1953]

Hey, wait! It was just yesterday when you commented on this video kzbin.info/www/bejne/rWfJn2CKiLR2j9E about your "new" machine and gave me the serial number. 😀 I replied to your comment as best I could. Did you not see it? 👀 Guess not, so I will repeat my answer here """" Wow! You're the proud owner of a Singer Model 66, made in 1930.✨ A classic "Iron Lady" and one of the smoothest running machines they made. Singer invented the Class 66 bobbin for this model (metal bobbin) that they used for dozens of later models. Model 66 has about 16 variations made between 1902 to 1956; one of the longest production runs in Singer's history. You may remember my Cute Model 99K series? kzbin.info/aero/PLsCOZgzzaiKIIUgkEujqHc9iNWN9NPW2Z (This video you commented on is part of that) Well, the model 99K is a 3/4-sized copy of the Model 66 and you can use the 99K videos to work on your 66. You can also download a free copy of the Service Manual here: www.manualslib.com/download/1752031/Singer-66-Series.html Your 66 may have slight variations to my 99K as your 66 is a little older. You can still download free copies of a couple of the 66 variation Instruction Manuals from Singer at this link: www.singer.com/search/support?title=66 Congratulations, and don't hurt yourself lifting that machine. BTW, you are a good man Mr. Palos. Thanks for rescuing it for your lady. """"" I hope that helps. If you need more you can drop an email to [e-mail] and I'll try to help 👍

[@ronschneider1870]

I can relate to your damage. My 1935 singer 99 was damaged by UPS. The foot broken off the base of the machine, the motor bracket and motor broken. UPS throws their packages in the back of the truck. No matter if it says fragile handle with care on it! I was heartbroken when I found it like that! I too am going to get all new parts for this machine. How do you fix casted on steel?

[@kam5876]

Ron, I'm sorry to hear that your machine was damaged during shipping but I can assure you that UPS didn't damage it. It arrived damaged for the same reason that Andy's machine did. It was because the person who shipped it did not understand how to package a heavy sewing machine for shipping. Many people assume that the case will protect the machine. In fact, the case makes it more likely that the machine will suffer damage. The case is designed only to protect the machine from dust and from items bumping into it while it is sitting in a stationary position. During shipping, the weight of the machine can be thrown around inside the case which results in damage to the machine and the case. To ship a machine safely, heavy duty bubble wrap should be wrapped around the machine and the case placed over it. The spool pin and any other fragile parts should first be removed. The fit must be tight enough that the machine cannot move inside the case. After the case is secured over the machine, the entire unit must be wrapped with bubble wrap. Use a strong, heavy duty box. Line the box with at least two or three inches of solid styrofoam on all four sides. You will need to use a box that is large enough to fit the machine and the styrofoam. You must fill every inch of space inside the box to ensure that the machine cannot shift or move at all inside the box. If the box has extra space after inserting the styrofoam, you can fill in the gaps with packing peanuts or craft paper. Do not use packing peanuts as a substitute for the solid styrofoam sheets. Packing peanuts will shift allowing a heavy machine move around inside the box. The weight of the machine slamming against the box or other items is what causes damage. It is a given that any shipping company will throw or drop boxes. Pack your machine to withstand at least a three-foot drop and you won't have any issues with UPS or Fedex. (Don't bother shipping large heavy packages via USPS. Their rates are usually double what UPS or Fedex charges for shipping large packages, especially for long distances.) If you are having a machine shipped to you, save yourself some grief and send these instructions to the company from whom you are purchasing. Many sellers don't have a clue how to ship sewing machines.

[@ronschneider1870]

@@kam5876 Thank you for the information!

[@andytubesewing1953]

I've shipped machines thru UPS with excellent results. I think it's more in the packing than the handling. I have shipped two machines in a package to S.E. Asia before. For your motor bracket; I've never had that happen, but my friend who works on vintage cars recently repair a water pump housing on a 1930s Chevy pickup by using a JBWeld Product. www.jbweld.com/product/j-b-weld-twin-tube Thanks for watching, Ron, and good luck.

[@galerae947]

I recently bought a Brother 15-70 at a Goodwill store for $5, in like new condition and in its original case. The machine was purchased in 1952 at a dealer in San Francisco for $35.50 along with the $12.00 case. The orig paperwork and owners manual were in the bottom tray of the case. I even have the warranty certificate. I do not know if the machine was new in 1952, or used, as the paperwork doesn't say. Obviously a Singer 15 clone.

[@andytubesewing1953]

Are you always this lucky? Clone or not, Brother made some very nice models. My wife's serger is a Brother from 1974 and I finally changed the cutting blades this year. To have all that provenance with the machine is very nice. Happy for you, wow.

[@galerae947]

@@andytubesewing1953 I was lucky, because the machine was priced at $10 for missing its bobbin case and hook, but it was half price day for seniors, and it was just too clean to pass up. I found the missing parts in the bottom tray under the machine after I got home. I had a wave of vintage machines that same week. I was given a 1914 Davis Vertical Feed in treadle cabinet and a Singer 127. Both hadn't sold during garage sales and the owners offered them to me because I was the only person who looked at them. Both were dirty, but cleaned up nicely and now function beautifully in addition to being beautiful.

[@andytubesewing1953]

@@galerae947 See what I mean? Lucky! It must come from the clean, kind life you are living 😀

[@anthonytriolo3643]

I think you should have not taken the 50 because you got a bargain for a vintage machine,a few scratches and broken light and box,big deal, very good instruction you gave.

[@andytubesewing1953]

Thanks! I do like the machine as you can see in all the videos. I finally did manage to finish the motor and Ike runs like a champ! I'll be looking for a buyer soon due to medical bills. It's my first ever 15-91 to work on. A truly amazing model. Thanks for watching my channel.

[@CindyWal]

I just bought a Class 15 1948 Singer. (I guess that's the model. Its serial number IS JC 10085.) I have no manual, and would like to find one, preferably an online version, so.i can know where and when to oil it. I can tell by this video that I also need a replacement tire that fits in the small wheel betweennthe bobbin winder and the hand wheel/fly wheel. Any helo would be greatly appreciated.

[@andytubesewing1953]

I don't have a serial number like that on my list, but the model 15 instruction manuals are free from Singer Support here: www.singer.com/search/support?title=15 You can just Google "Singer Model 15 bobbin winder tire" and find hundreds of sellers. My playlist for model 15 with 16 more videos is here: kzbin.info/aero/PLsCOZgzzaiKJftyGwzdDiWa9R6HFEACJo happy sewing

[@anthonytriolo3643]

I repaired the wiring on the motor because the insulation was all cracked ,the same year .

[@rndea100]

my 201k singer light goes off when i press on the foot to sew any ideas can yu modify these old machines in any way like bigger needles or a walking foot mod swing bars is there any think to make them more industrial ???? the builds look very similar to each other

[@andytubesewing1953]

I have not worked on a Singer model 201. The light problem you mention I have found to be bad connections on splices or termination on other models. Singer model 201 can use a 15x1 style of needle in sizes 9, 11, 14, 16, 18, 19, and 21. That size 21 is a pretty large needle, IMO. Cleaning and adjusting the foot controller can increase speed/power: kzbin.info/aero/PLsCOZgzzaiKL6ePPxLpmnWSzTyxPKTb71 Cleaning the commutator on the motor has increased the performance on some models as much as 25%. kzbin.info/www/bejne/qKG3qpJ4r5ijqKM kzbin.info/www/bejne/pqvUZaesbdahb5Y I'd never modify a domestic machine as you mention. I'd just get a vintage industrial machine.

[@rndea100]

@@andytubesewing1953 thank you would be nice to sew i propa modified domstic into an industrial by bolting on sum parts that are ment for an industrial one

[@staylor8638]

Dear Andy, Hello. Hoping for tips on how to correct the following issue: I have a copycat of model 15 Japanese made. This sewing machine won't pick up bobbin thread thus after threading the bobbin and upper thread correctly + new needle ,no stitches are putting down:( Thanks in advance for your advice and educating me. Regards, Sue

[@andytubesewing1953]

This is usually a sign of timing loss. On many machines, you reset timing by loosening a connection between the hook and the hook drive shaft and aligning the hook point to the needlepoint. On this model that setting was done at the factory and instead of set screws the connections are pins set into the metal. More permanent. The adjusters manual says do not to mess with it and send it back to the factory if needed. However, the first step of checking/setting the timing is to check/set the height of the needle bar to the correct height. That normally fixes loss timing on this model. The needle bar may have been pushed upward by the needle hitting the hook or needle plate and is now too high for the hook point to grab the needle thread. That is what to check for now. Here is a playlist of my videos for this model: kzbin.info/aero/PLsCOZgzzaiKJftyGwzdDiWa9R6HFEACJo One of those videos is all about the needle bar and you can find it here: kzbin.info/www/bejne/b5XCYXqhj8aDmsU You have done all the normal troubleshooting up to this point, so check the needle bar. Good luck.

[@staylor8638]

@@andytubesewing1953 Andy I noticed the needle goes pass the bobbin case or outside the shutlle driver part. Now i see needle marks on fabric but no stitches:). Could this be a needle timing issue?

[@andytubesewing1953]

You do not state if you watched the needle bar video I recommended and verified your needle bar height. OK, sure, it could be a needle timing issue. All I can do at this point is refer you to the playlist of my 16 videos for timing Singer sewing machines. That's everything I know about needle-to-hook timing. kzbin.info/aero/PLsCOZgzzaiKLk_Q_6w0UjhnQUgi7Iy3K7

[@staylor8638]

Dear Andy, Yes sir I've watched your recommended KZbin video. Actually I can say after watching most of your posts on KZbin for vintage sewing machines, I gain enough education to gain enough courage to replace the wiring, light, belts , bobbin winder on this copycat Singer made in Japan with no book or model-marking. Given I just started slowly learning how to dos for singer class 15 , i am afraid to take the needle bar out especially if there's an easier way to correct the needle stitches issue. After watching your video on the needle bar Height & Hook timing of a Singer model 99; & checking that against my machine issue & how the needle keeps missing picking up the bobbin thread on my machine .. My thoughts was perhaps making an adjustment to its hook timing first could be easier workaround (specially since it seems to be more on my education level), rather than missing around with the whole needle bar:) I'm very thankful for all your informative how to dos & thank you for educating me. Regards, Sue

[@andytubesewing1953]

@@staylor8638 Congratulations, it sounds like you are a natural mechanic. As I stated, on the model 15s I have worked on the hook drive shaft is pinned to the driveshaft from above and timing is set from the factory. Changing timing involves using a drift pin punch and removing those pins just to start. The SInger mechanics at the stores did not even attempt to do this but sent the machine back to the factory. The only time this was required was when the shafts/shafts were bent from the machine dropping on a hard surface, otherwise, the timing never moved. Later Singer models were made with set screws instead of pins and that allowed for the screws to be loosened and the hook rotated so the point of the hook was behind the point of the needle at the right height of the needle bar on the upward stroke to set the timing, and then the screws retightened to hold the timing. Every model 15 I worked on that had a timing issue was because the needle bar had been moved up. When I suggested you watch the needle bar height video it was to help you understand the relation of NB height to hook timing. There is NO NEED to completely remove the NB to just set the correct height. There is NO NEED to set the correct height if it checks out to be at the correct height to begin with. I've never even seen a "Clone" machine and have no idea if the parts and functions work the same as the SInger model. I don't know how else I can help you with a clone machine that you are learning to work on as I have never seen or worked on one.

[@patt4251]

We also have a similar sewing machine and i wish you could help, our feed dog is not running properly, it is lower than the needle plate and there is something wrong under the machine that is responsible for feed dog. Hopes you guys can help. Thanks!!

[@andytubesewing1953]

By similar sewing machine, do you mean that it is a model? 15. I'm asking because model 66 and model 99 and model 201 all look similar to this but some have a different feed dog system. If you don't know what the model number is, can you give me the serial number?

[@nhh8517]

Hi Andy. I have a new to me 15-91 and the spool pin just drops down into the machine about 2/3 the length of the spool pin. There’s about 3/4” that shows above the body of the machine. Do you have any suggestions or ways to possibly fix this?

[@andytubesewing1953]

Hard to say without having hands on the machine, or at least some pictures. Maybe you have the wrong pin. Maybe you're using the wrong hole. Maybe you have the correct pin and hole but someone enlarged the hole for some reason. I assume you are talking about the upper arm spool pin. Here is what they look like: www.sewingpartsonline.com/search.html?keywords=Spool+Pin%2C+Drive-In+Metal%2C+Singer+%23YA-1 On page 25 of the instruction manual, there is a picture showing which of the 4 holes in the area are for oil and the one for the pin. If you need the manual you can download a free copy of the original from Singer Support here: www.singer.com/search/support?title=15-91 You can remove the service plate cover on the back of the machine directly behind the pin and look up inside to see what is going on. Here is my playlist of all 17 videos for model 15-91: kzbin.info/aero/PLsCOZgzzaiKJftyGwzdDiWa9R6HFEACJo I show how to remove the light and service cover, and have several views of the inside parts of the machine that may be of help, IDK. Good Luck, and thanks for watching my channel.

[@nhh8517]

@@andytubesewing1953 thanks. I took a couple of photos for you. Hope you don’t mind taking a look.

[@andytubesewing1953]

@@nhh8517 I don't see a link to the photos you mention. You can't attach photos to a comment.

[@nhh8517]

@@andytubesewing1953 dang. Yes, I tried but couldn’t find a way to attach them. I looked at the manual and I’m pretty sure the peg is in the correct spot (the second one) and yes, I can see the spool pin drop down through the back “window” and it rests on the crank shaft. I took one photo where it was resting on the metal inside and one where I’m lifting it up just a little and it’s lifted, so I know it’s the spool pin. I was thinking of wrapping the pin in painter’s tape to thicken it and prevent it from dropping all the way in. I also bought a spool stand that I can sit next to the machine, but I was just hoping you might have experience with a spool pin that drops too far down.

[@andytubesewing1953]

@@nhh8517 Glad that is all it is. I did have a machine in the Philippines at a convent that was missing a spool pin. After tuning and cleaning the machine we took a BBQ Stick and cut it to a good height, and the Nuns painted it silver and then with a clear coat of lacquer paint. It worked well. 5 years later I was in the area again and stopped by to visit. They were still using the BBQ stick. What is nice about most spool stands is they can use both types of thread spools; the "reel" wound older style. and the new "cross" wound spools. My wife uses one with her 301A for those taller skinnier spool threads.

[@tryzz8]

I have this machine with this badge, what does mean.

[@meganmills6545]

I think it was a Centennial badge that Singer put on machines for a year or so around 1951-1952 to commemorate their 100th birthday. (They started up in around 1851.)

[@andytubesewing1953]

@@meganmills6545 My 15-91 has the black standard border that started in 1952 after the centennial badges of 1951 and you are correct, a commemorative badge for 100th year www.singersewinginfo.co.uk/gallery_badges

[@RKParK1]

How do you know the ‘dash’ number on singer machines?

[@andytubesewing1953]

I mostly do not know, but often can figure it out. Sometimes it is shown right on the from of the machine, near the stitch length lever/plate. Sometimes it is on the Instruction Manual. Sometimes you find charts like this: ismacs.net/singer_sewing_machine_company/model-list/ Sometimes I've even done a Google Image search and found the machine in the results and learned that way. On eBay you can find a guy in Canada that sells a CD with 100s of parts and instruction manuals and they are listed by model number in numerical order.

[@bsj1953]

Your Age?

[@meganmills6545]

I presume you mean the machine? It is from the 1950s and I think it has a Centennial badge so it would probably be from around 1951-1952 or so.

[@andytubesewing1953]

@@meganmills6545 Thanks for the info 🙏