I finally found a good video explaining how to do it in max model .
@reflexairsoft46483 жыл бұрын
Thanks man 😊
@joehernandez2506 Жыл бұрын
If you are new to airsoft you do not need this hop unit. A g&g or zci rotary are great units for cheap
@tmellor7797 Жыл бұрын
G&G are 👌
@GardenOfMusic143 Жыл бұрын
Too late I already bought one and a new motor and a 13:1 gear ratio.
@josephbentley65916 ай бұрын
I bought it because I'm playing in a few weeks and this was the only decent thing I found on amazon, (accidently broke my c clip on the current one)
@felixgrondin32643 ай бұрын
@@tmellor7797 I broke mine so maxx it is then
@BurningSovereign3 жыл бұрын
This was incredibly helpful for me, thank you. I have some amendments to make.
@lawtoncustom85823 жыл бұрын
In one of your videos you mention sanding one of the aluminum nubs flat and you had really good results. Is there any way you could elaborate on your results and the differencing in flight you saw compared to keeping the original curved shape of the aluminum nub. Would the 2021 Mr. Hop perform well with a sanded flat aluminum nub? Thank you for your thoughts.
@reflexairsoft46482 жыл бұрын
The flat mod is only for flathop style bucking, but yes Can Make a vid about it 👍
@lawtoncustom85822 жыл бұрын
@@reflexairsoft4648 Awesome! I'm looking forward to the video.
@punisher402442 жыл бұрын
Thank you!!!
@trevorwellington16362 жыл бұрын
hey i installed the hopup recently and it shoots amazing but the first couple shots maybe 20 or 30 of a full mag just drop but after that it works fine. like it doesn't shoot well when the mag is completely full any advice or thoughts on how to fix it
@danglol Жыл бұрын
So I can just use the smaller metal r hop nub and flat arm for flat hop and it will be excellent?
@BorgCreations2 жыл бұрын
Do you have any recommendations to upgrade the hopup or possibly r-hop the tokyo marui mws gbbr?
@kristiansigismondi3 жыл бұрын
just ordered this. I have the same bucking as well. You used the flat hopup arm with it right? Does that one come preinstalled?
@reflexairsoft46483 жыл бұрын
I use the standard aluminium nub that comes preinstalled, that works really great with this bucking
@TitoSabbyPH2 жыл бұрын
do you still use a hop nub?
@hudsonvinicius97863 жыл бұрын
Maxx Hop up LED mod for PolarStar F2 FCUs?
@reflexairsoft46483 жыл бұрын
Is this a video suggestion? 😄
@hudsonvinicius97863 жыл бұрын
@@reflexairsoft4648 it can be yes
@callsignscrottymcboogerballs88 Жыл бұрын
I get such mixed results with this hopup , it works great in my friends stock krytac and nothing else , my guess is the nozzle length cause it doesnt feed 3 different kytheras and every aeg I own and it only runs in that krytac ... but stock vfc and krytac run in everything...
@fx_brad1562 Жыл бұрын
Yea usually MAXX doesn’t like working with other parts but if you get MAXX parts they work really good together
@-_Nuke_-2 жыл бұрын
Why exactly is this the best hop up though? To me it doesn't look like something special, its just a metal overpriced hop up, it doesn't even have clicks in the rotary so that they stay in place, I don't think this thing deserves 70$
@pauls.58152 жыл бұрын
Crazy people talk trash about maxx hop units. "I can get a ZCI for $10 and it does the same thing" First off, no it does not. Second, it is $40.... SO spend $10-$30 more and get an infinitely better part, no brainer.
@darylobey8867 Жыл бұрын
A few of us at are local spot use maxx hop ups and ot 1 single issies with any of them had zero problems in mine :)
@Legojavier8 ай бұрын
Plz do not get this hop up
@Mr_Fix_It_7 ай бұрын
I am having an issue where the installed bucking doesn't hold the BB. BB just rolls right through it. What am i doing wrong?
@Dacialastun Жыл бұрын
The greatest cr@p unit, I have only issues with one of these, so bad that I purchased a ZCI plastic one to replace it. Looks and paint don't make it a good product.
@Mark_B5442 жыл бұрын
lol, the WORST make of hop up
@rileyp15542 жыл бұрын
You explained this and showed us how to install all that very good, thank you so much and please keep making videos
@DomX20083 жыл бұрын
I've watched many of your videos now and really impressed with the in-depth content, knowledge and honesty about the products you use, I'm also quite surprised you don't have more subs! Keep up the excellent content :-D I'm sub'd!
@reflexairsoft46483 жыл бұрын
Aww thanks man, I will start more uploads again soon, as im on vacation atm. It means alot to me that people that watch my channel likes it, that is for me more important than amount of subs. And thanks again ❤️
@DomX20083 жыл бұрын
@@reflexairsoft4648 Sounds good to me, will keep an eye out, Just watched one of your videos from last year, working in that sector, I hope you are still in remission from cancer. Have a great break! :-D
@reflexairsoft46483 жыл бұрын
Thank you man, and thank you for the difference you make. Regarding the amount of subs, I Think its Down to me not spamming every other page with my stuff, I like to Think my subs are more “organic” and invested 😊
@martyfowler30722 жыл бұрын
Good explanation of how to. But, I would like to see a part 2 on showing how and why the hop up can or is an improvement as you do a test fire and compare other hop up units with it. imo Otherwise your praising a product without any tangible results.
@TonnoNinja2 жыл бұрын
Agree
@joshuasmidt85953 жыл бұрын
like the detail on installing a barrel as general information. Wish you went into the nub install
@RattoMatto932 жыл бұрын
Hi mate, I love your videos, I just watch all of them in 2 days. You are amazing! I want to change my hop unit. Want to go for: Maxx me sport Bc Prometheus 6.05 275.5mm Mr hop 60 My doubt is for the improvement. In Italy the joules limit is 1. I have a ghost m erm by evolution not custom. I want to use it with 0.25 or at least 0.28 bbs. Do you think I’m doing a good upgrade? Thank you so much for your channel.
@ridewest572 жыл бұрын
That sounds good I’d flat or h hop it and stick a 6.03 or 01 mm inner barrel instead for improved accuracy and fps
@DeadEyeDe123 Жыл бұрын
Does the maxx cnc m4p pro have issues feeding with some standard nozzles? I have the m4p and once installed it isn’t feeding the bb into the barrel I’m using a maple leaf tightbore 6.02 and a mapleleaf super macron 60 degree bucking
@bloodgun2010 Жыл бұрын
Did you figure this out as I have the same issue?
@Likexner2 жыл бұрын
Hi, do you know any place where its possible to buy only the flat lever? I bought this unit second-hand and i only got the classic rounded lever but i wanted to use r-hop so i sanded it down. I dont have any special tools so i did it by hand and its not precise enough. I would like to get the flat end lever that normally comes with the unit but i dont want to have to buy a whole new unit.
@madsbjohansen3 жыл бұрын
Hey I see that your BB go right through the barrel after you did the installation. I have issues with this and the BB won’t enter the barrel easily after installation. Any idea on what what could be the issue? I use a green G&G rubber and a 6,03 Madbull inner barrel.
@pxrcision9285 Жыл бұрын
Can you do a video on how to change the hopup nub
@FennekoTaiga3 жыл бұрын
It comes with instructions right? Thinking of getting the LED one
@reflexairsoft46483 жыл бұрын
Yes it does, the led version comes with that as well
@IAmSwordless- Жыл бұрын
U got any spare hopups lol?
@mralexander75362 жыл бұрын
Very nice guide! I m kinda a begginer so, is this hop up unit using what is called a r-hop ? If this is a stupid question i m sorry :))
@dluxsharp6212 Жыл бұрын
Not on this one no basically a r-hop helps the bb travel further without adjusting the hopup a bunch(Sorry about the late comment
@argonianmalc3 жыл бұрын
Being a machinist myself all i can say is... That tickles the pickle 😍
@jtdiesing7472 Жыл бұрын
Which Mable leaf bucking would work best with the maxx hop up and polar star jack 360mm barrel length
@netunooog2 жыл бұрын
I'm new to airsoft tinkering. Was looking at one of these but the ics split gear box would not work with this, right?
@igortodorovic646311 ай бұрын
What type of barel is that? Does the barrel really matter? Or can i just use my stock barrel ?
@hardstuckaluminum67203 жыл бұрын
quick question, what if my bucking lips are protruding too much into the hop up chamber? do i sand the lips down? im not sure what to do
@reflexairsoft46483 жыл бұрын
Depends, first test if the bb Can pass the lips and go into the barrel somewhat easy, if you need Force to push it through then the barrel to hopunit and bucking is not a good match. If it goes through easy, the yes sand a little off the lips, install and test, still not good, sand alittle more and test
@hardstuckaluminum67203 жыл бұрын
@@reflexairsoft4648 thanks, i sanded the bucking lips just a tad and it seems to have worked out good
@reflexairsoft46483 жыл бұрын
Great to hear 👍 good job
@wargames432 жыл бұрын
I use a MP5 but the 2 side pods on this thing that locks it in place on the M4's blocks it from going in. Should i mod in some grooves in the alluminum seat of the hop up or should i grind off the 2 flaps on the hop up? The hop up locks in place inside the magqwell anyway since it sits inside a circular tube so it can move anyway. And cant i change the nozzle size of the gearbox to fit this hop-up if its to long?
@mondrekirton23472 жыл бұрын
good day any idea if the maxx hop up unit will work in a aps asr 114 spyder?
@cameronscott1219 Жыл бұрын
Where is your r hop patch on the hop window? Ive been told 50/50 that you absolutly need one or that you just need a good quality flat hop bucking. Honestly frustrating because my gun shoots to the left after 10 yards rn and i only use the flat hop promy purple bucking.
@MineStrongth4 ай бұрын
Hopefully you have it sorted by now but... The maple bucking has a protrusion on the inside that fits in that window. That's why he had to lift the bucking while installing it (the part when he said it stopped sliding on). Once cause of shooting left or right is the barrel being installed slightly off canter (rotated, not perfectly vertical).
@jonelsorel3 жыл бұрын
Just a thought: how about naming the product in the title, or description?
@lukethompson7970 Жыл бұрын
I have a m4A and my gun shoots lasers
@HighKaliber2 жыл бұрын
plz come back
@darren3403 Жыл бұрын
Is this available for the mp5?
@1k_.sosa._143 жыл бұрын
quismas
@simongall67623 жыл бұрын
Sadly my c-clip snapped after the first install. But otherwise maxx units are the best you can get. Got one for my vfc scar h ssr
@reflexairsoft46483 жыл бұрын
Im sorry to hear that, I had my c clip out of this Unit maybe 50-60 times, as this is my test unit still the original.
@cole8432 жыл бұрын
Is this hop up unit good for flat hopping?
@Staffdaddy-uw5de2 жыл бұрын
How big is lancer tactical nozzles
@Mopoeman3 жыл бұрын
First
@deadspace3coopcrack3163 жыл бұрын
Hey man, thanks for the video. I have a couple of questions if I may. I just bought CYMA SR25 and I was thinking of a few upgrades, but have a few questions. 1. These units should fit the SR25 right, no only AR15? 2. Dont these maple leaf buckings have some extra line also in the other direction that fits only maple leaf barrels? Like... 1 line is to slide on the barrel, and the second on is horizontal. 3. So with these metal pieces I wouldnt even need to order maple leaf omega nub if I get it right? Because it already has that shape? Thank you man.
@reflexairsoft46483 жыл бұрын
Hey man thanks alot. 1: If you have seen my gun collection vid, i have a sr25 by cyma(cm.072) with the maxx Unit, fits no problem. 2: correct, the new ml barrels have a Line to fit the line in the mr.hop but the bucking will work on barrels without this line, no problem. 3: correct I never use omegas with the maxx unit, i only use the original installer aluminium nub. I use omega in other hop units.
@deadspace3coopcrack3163 жыл бұрын
@@reflexairsoft4648 Hey, sorry for a late reply and thank you very much for answer :) And I have a few questions again, hope you dont mind :D So it should also fit the CM.098 version of SR, due to its extended gearbox? Because that is the one I have. With this you mean even if I buy prometheus barrel and get mr hop I could do that? Like.. wouldnt that extra line push the bucking up and be non even on there, if you know what I mean? And one more question, which of the ml bucking is the best? I believe they all have a different sized contact patch? Thanks again.
@reflexairsoft46483 жыл бұрын
Sorry for the late reply aswell, I dont get notifikations on this. The sr25 cm098 does have a different hop Unit than the standard m4 cyma, but it is still a normal m4 style Unit, so should be no problem So yes if you see my new vid maple vs maple, you will see i use MR hop on a normal Prometheus barrel, so the ring cause no problem. But the hop Unit in your cyma is very good, do not change it, change the bucking and nub instead As for the maple leaf buckings best to worst: Mr hop 2021 Mr hop Super macron Monster Macron
@deadspace3coopcrack3163 жыл бұрын
@@reflexairsoft4648 Hey hey, thanks for the reply again. I have just placed an order yesterday for the MAXX MODEL (blue edition from specna arms), LAMBDA barrel and mr hop 2021, before I got a chance to read from you that I should not even buy the MAXX, but here I am haha :D Just...1 more question if I may. I read somewhere that I should have a nozzle length of 24,00 - 24,30 for MAXX + sr25 but the stock one is 25.00 for the CYMA one that I bought I believe. Do you know anything about that, will I have to change the nozzle too?
@prodHama3 жыл бұрын
are u danish? i smell accent
@reflexairsoft46483 жыл бұрын
I am
@LGBTQ-L2 жыл бұрын
Will this work on an arp9?
@reflexairsoft46482 жыл бұрын
It will but the g&g hop Unit is plenty fine
@Lprodz Жыл бұрын
Can I put it in a polarstar jack
@tytalent41172 жыл бұрын
What mr maple leaf bucking and nub are the best?
@trevorwellington16362 жыл бұрын
it depends on your fps. most fields are 1.5 joules and if you are shooting that or under that go with the 60 degree if you are shooting less then that go with the 50 degree and if you are shooting more then that go with the 70 degree. its fps based
@tytalent41172 жыл бұрын
@@trevorwellington1636 350 fps. And 400. What's that?
@trevorwellington16362 жыл бұрын
@@tytalent4117 the 60 degree bucking is 295-390 FPS the 70 degree is 360-460 FPS so either one will work it is up to you what ine you get
@tytalent41172 жыл бұрын
@@trevorwellington1636 thanks :) when are you going to make a vid lining up all the different bucking? And tell us whats the best?
@Tavpanda3 жыл бұрын
We’re hopup twins for having identical snowflakes 🤓
@BorgCreations2 жыл бұрын
What is the difference between the pro and sport model? Are there any feeding issues with various magazines? Any fitting issues with g&g models?
@dluxsharp6212 Жыл бұрын
Sorry this is a little late of a reply but basically the pro has more tuneable and has a bb catch so no bbs fall at out when taking a mag out and no there is no issues with it in a g&g body a recommend the new Cnc maxx me pro hopup, yes it's $80 but it is the best top tier hopup you can get on the market