Upgrade to the Maxx - EMG Maxx CNC Aluminum Hopup Chamber - Quick Look

[@insipidoaf]

I have these in two of my AEGs and it's so much better and less picky than a ProWin. Had a ProWin for a while and it was such a pain. This one has so many more features and a nicer dial and arm and, just everything. Cannot recommend Maxx HopUps enough!

[@Miguelon88888]

What brand AEGs?

[@insipidoaf]

@@Miguelon88888 G&P and an A&K

[@Miguelon88888]

Thank you

[@milanstanimirovic1371]

would you say its better then most of the maxx hop ups like the max pro etc??

[@turbochargedfilms]

Oh cool, now I can do a sick tacticool chamber check on my AEG and *actually* see the status of the BBs 😂

[@CadWeapTech]

Checking the chamber isn't tacticool its safety 101 regardless of type of gun.

[@R3CKL3Z19]

Just bought one can’t wait till it ships now !

[@drippen5865]

is it good thinking ab;out getting it

[@carlosvaldivia566]

already got it

[@that1kidonyoutube]

is it compatible with the tokyo marui devgru custom hk416

[@evikecom]

Please contact [e-mail] for compatibility assistance

[@max0nily]

Idk if anybody will see this, but i have a Colt M4 bundle pack that was about 260$, and i am wondering if i buy this hop-up, will i need anything else in replacement or no?

[@iiAnferny]

E V I C K

[@cf8075]

Would it work on a krytac with the Kythera installed

[@heatherhasty2040]

does it work in a apr9

[@mondrekirton2347]

good day any idea if the maxx hop up unit will work in a aps asr 114 spyder?

[@Misimer556]

Does this work with a matrix calico jack 350fps. Pls and thank you

[@evikecom]

Yes it will!

[@GunSlinger999]

Would this work on elite force m27 ? Idk never upgraded my guns before

[@NV_Neko]

I know I'm late to this but will this fit in a classic army? or will I have to modify the upper or the outer barrel. I know classic army uses a hopup unit that has a thinner channel for the hop arm. this is why I'm asking.

[@evikecom]

Contact [e-mail] for advice

[@theflyingguineapigfpv5812]

Will this work on the Kriss Vector

[@evikecom]

Not without heavy modification.

[@MaxRefresh]

@@evikecom does this work on the scorpion mod m from tm and what’s the difference between sport and pro

[@RAZERTAHP]

anybody know if this bad boy will fit the krytac vector?

[@evikecom]

Not without heavy modification.

[@sogerc1]

That bottom lever looks like a good idea. And I also like the numbered dial. If only evike would ship to my country...

[@jamescameron6819]

Try ordering from Maxx directly

[@birtalanlorant5572]

Or Krytac, no lever, but numbered dial hopup, exactly like this.

[@-_Nuke_-]

66$ for something that actually costs not more than 5$ to make and 10$ to sell. Absurd.

[@ChangeIsChoice]

@@-_Nuke_- maybe you aren’t as “into” the sport as others are and should respect what they choose to do with their money.

[@-_Nuke_-]

@@ChangeIsChoice I'm into the sport, but damn this is absurdly overpriced...

[@Terminatorbart]

That lever is like a "check valve", very cool!

[@evikecom]

It really is one of the coolest features we've seen on a hopup chamber!

[@phillyairsoft6372]

Love your vids man

[@fireball_airsoft]

I just learned about check valves in aircraft fuel systems school

[@seanmiller3683]

Are you kidding me? I was litterly just looking at buying this, what a perfect time for a video to come out about it.

[@MB-tc7tw]

I’m just waiting on when they finally release their tracer hop up for the scorpion evo.

[@afriansyahian7534]

can it install to crytac barret rec 7 di ? i want to buy this but i am fried it will not work. sorry evike for late comment/asking because i just bought the gun

[@evikecom]

Yes it should drop right in! If you have any questions, please contact [e-mail]

[@afriansyahian7534]

@@evikecom ok thx evike

[@afriansyahian7534]

hi sorry maybe it's late to give review emg hop up chamber pro. i had bought it and installed to my krytac. and it's not literally plug and play, and who want to buy maxx pro hop chamber emg for krytac the hop up bucking should be cutting short so the c clip can be installed and i hope it can help people want to buy it.

[@afriansyahian7534]

and emg pro it's great.

[@richardmorgan2872]

Umbrella armory probably not going to be happy lol

[@oliveremter]

Hey evike! I’ve been having problems with my maxx me pro hop up with led, because the led will only light up the bbs on full auto not semi it’s turning on but I think it’s to delayed do you have any way of fixing this

[@austinflamini1425]

Hello, I am looking to purchase this for my Krytac. My question is do I need to order a R-Hop Prometheus barrel or a regular Prometheus barrel before I order. Thank you!

[@SapeMelk]

anyone know if this is a good upgrade for the ssr4? and if it even fits? (with novritsch mags)

[@ClarkGraham]

Same question

[@JuanRivera-iz2cw]

Anyone know how I can fix my feeding issue with the hopup from the video? From what I see, my midcap mags are not feeding the hopup well. I have to move the mag around so it can feed bbs. I have checked if the hopup is aligned well and it is. I have tried adding velcro as well to try to adjust the mags position and no luck.

[@DevSprout]

Can't speak to how they work with other builds, but in both of my tippmanns (recon and commando) and a gen2 lancer the maxx hopups did not work out of the gate. I had to do a bit of filing/dremeling on the bb latch/lever, the bottom of the gearbox, and two of my barrels (in order to use the r-hop). Pretty lame considering the cost of both the units.

[@DevSprout]

@old man strength on the top of your hop up unit is where the arm sits, on one end it attaches to the dial that you turn to adjust the hop and on the other it holds a nub, a small piece of rubber that sits between the hopup arm and the bucking. This creates the bulge in the bucking as it is pushed downward by the hop arm, through the barrel window. The bulge is what creates backspin on the bb as it passes through the barrel

[@Dosernyc]

Is this good for on my SSG1 ? Or ARP9 ?

[@ethanhall6011]

I bought this a year ago, it’s work really well

[@SourpatchAirsoft]

Is this hop up compatible with Krytac? I keep hearing mixed reviews.

[@evikecom]

Yes it is! The 'ME' model (not the 'MI') is compatible with Krytac AEG's. Our techs have successfully installed these into many Krytac AEG's, without issue.

[@ganza_tactical]

Yes, without problem ME version. But after installed have problem with magazines need to change a little angle of magazine during shooting, but hop unit is great.

[@roycedoll115]

I’ve been looking at buying one of these. Does the ME pro work in valken receivers? The valken receiver I have has been picky with other parts I’ve installed into it so I want to make sure before I put 60 bucks into a hop up chamber

[@evikecom]

Yes! The 'ME' pro will work in just about every 'M4-style' receiver. Valken receivers are very compatible when it comes to hop-up chambers.

[@roycedoll115]

Thanks. One more thing I’ve been looking at buying is the madbull 4 inch Daniel defense rail. Are those compatible with a valken upper? Specifically the barrel nut?

[@evikecom]

@@roycedoll115 Valken upper receivers have standard threads, so will be compatible with most handguard barrel nut systems, including the MadBull one.

[@MrKilled1]

Does it fit in the vfc avalon series?

[@aaronrogers1621]

Looks awesome. I have never upgraded my gun. What else do I need to purchase to make this work?

[@evikecom]

This part should replace your stock hop-up chamber without the need for additional purchases. For ideas on what else you might want to upgrade, check out our videos where we talk about upgrades: Upgrades Part 1 - kzbin.info/www/bejne/eJSXeoianMqKaqc&t Upgrades Part 2 - kzbin.info/www/bejne/oHW2Y56mjMZ1jqM You can always contact us directly for assistance or advice! [e-mail] [phone] 7:00am to 5:00pm PST Monday through Friday

[@elsergiowastaken0472]

if you’re using standard flat nub bucking and don’t have one id say to get a bucking which comes with a flat nub as well. as the max hopup comes with the flat nub arm but doesn’t come with a flat hop nub so you’ll have to buy that separately

[@ganza_tactical]

Great hop unit but has problem with pts epm, krytac magazines. Need change a little angle of magazine to shooting normal.

[@mitchellsheridan5252]

It must be your gun then. My epms work fine, I own a g&g combat machine receiver set.

[@patrickmuller5223]

Do the diferent collors have changes ore just loocks.

[@idiotdojo9591]

What inner barrel works best with it?

[@Static_MK3Focus]

only the best hopup on the market. I have the ME pro, works well with my polarstar and my DSG

[@carlosvaldivia566]

same lol

[@tayob646]

What did you pair it with (bucking/nub/ barrel)

[@Static_MK3Focus]

@@tayob646 lambda 6.03 x 275, lonex 70 degree, and the maxx r hop nub

[@tayob646]

@@Static_MK3Focus thanks

[@M3l_0N666]

Getting myself one, it's pricy but seems worthit.

[@mitchellsheridan5252]

Oh yes, it’s worth it.

[@M3l_0N666]

@@mitchellsheridan5252 Got one, aaaand it's actually not as good as a thought. Gonna need to switch it around in my guns to see where it'll actually work properly. Threw it in my ARP and it fkn made it shoot so fking scew.

[@P1ayer0n3]

Anyone have any experience using this in an Ares Amoeba?

[@thecrazyspud]

These are great. Considering installing the tracer kit.

[@Mtxxeditz]

will this work in a g&g arp9?

[@626KiDD]

Wondering if this Hopup unit works well with 2.5/SR-25 gearboxes.

[@evikecom]

Our techs say "Generally, yes. It should work as long as it's not a G&G. Double-check what nozzle the Sr-25 uses and reach out to us via email if you have more questions." [e-mail] [phone] 7:00am to 5:00pm PST Monday through Friday

[@626KiDD]

@@evikecom It's G&P SR25 that came stock V2 gearbox--I swap it recently for a A&K 2.5/SR 25 gearbox.

[@kgraebes88]

bought this hop, using it with an HK 416 and a wolverine inferno gen 2 hpa engine, for some reason its double feeding, shooting 2 bbs at the same time sometimes. Ive tried 3 different types of magazines, all m4 style, high and mid caps. No idea how to fix the issue, anyone got any ideas?

[@matthewpoole7965]

When will you restock a bunch of your guns I'm looking at two of them and they're not in stock

[@evikecom]

If an item is OUT OF STOCK, we have already placed orders for it and are waiting for the product to arrive. As soon as we receive the shipment, we will update the listing. To be notified of when an item is restocked, click the 'EMAIL ME WHEN IN STOCK' button on the product page. The button is located just above the 'ADD TO WISHLIST' button. You will automatically be sent an email the moment an item is back in stock.

[@matthewpoole7965]

Ok thanks

[@JoshAllingham95]

I’ve heard a lot of bullshit about this hop up

[@cortneymiller1465]

Are used the extra arm and nub that came with it And it didn’t work for shit So I put the original nub back in and it still doesn’t work. I noticed you don’t use the metal block just the nub so why does it come with the block? When I shoot it Goes down When I increase the hop up it goes down even more instead of up why??

[@evikecom]

Hello! The Maxx hopup comes with the R-hop arm and nub pre-installed, with a second R-hop nub in the packaging. Also included in the package is a 'standard' arm for use with normal nubs. If you have further questions, please contact us directly. [e-mail] [phone] 7:00am to 5:00pm PST Monday through Friday

[@reggie8285]

Could you put this in the g@g 308

[@lamtr1577]

This and madbull blue flat bucking

[@SiliconeSword]

I'd say this, Lambda 6.01, and a Maple Leaf 2021 MR-hop instead

[@lamtr1577]

@@SiliconeSword flat hop is good enough this hop unit has very nice nub

[@opairsoft8100]

@@lamtr1577 flat hop isn’t that great, very very thin rubber that contacts the bb

[@dr.weaver6011]

I’m getting it as soon as possible!!!!

[@insipidoaf]

Do it!!

[@ravenval5046]

bit of an insufficient question but what's the difference between Pro and Sport?

[@evikecom]

Mainly the 'BB gate' that keeps the BB's from dropping out.

[@emmettmeents2329]

If i have a cheapish rifle will this help with accuracy and range?

[@SiliconeSword]

Yes, so will a better bucking and barrel. You should also get the Maxx nozzle, piston head, cylinder head, and cylinder to boost FPS, FPS consistency, and accuracy.

[@emmettmeents2329]

@@SiliconeSword Ok thanks

[@evikecom]

Yes and no... While this hopup is very well built and can offer a consistent pressure on the BB, the hopup chamber alone will not always give you more range/accuracy. What it can do is help you reach the max potential of your barrel/bucking. If you don't have a nice barrel/bucking yet, get those first. Basically, if the barrel/bucking is holding you back, then this won't make those problems go away.

[@emmettmeents2329]

@@evikecom Thank you first of all do you have a recommended barrel and bucking for an m4

[@evikecom]

@@emmettmeents2329 Check out this video where Matt recommends parts you can install without opening the gearbox: Matt's Top 6 AEG Upgrades - Part 1 kzbin.info/www/bejne/eJSXeoianMqKaqc&t Links to all the recommended products are in the description.

[@Ryan-Fury-Feighery]

Looking @ dropping one of these in my Krytac Rec7 been seeing mixed messages about the Magazine compatibility with the Krytac mid caps? Any feedback would be greatly appreciated 🙏 thanks.

[@johnmurphy3242]

Is there a major difference between this EMG one and the Red M4A pro? They seem to be the same thing but the EMG one is 10 dollars more. Does it offer a better feature/less picky with fitting ahn the other one? Cause I heard Maxx have compatbility issues with some airsoft guns

[@ttenneb_luvs_u2373]

Could you do a dedicated Review on the Cyma M3 super 90

[@evikecom]

We did a review on all the CYMA Tri-Shot Shotguns recently, including the Super 90! - kzbin.info/www/bejne/g2exZIl8Yrihppo&t

[@larryk1978]

What bucking do you guys at Evike Recommend for this hop up??

[@heberhogan6747]

@evike is this hopup compatible with emg ddm4a1 ??

[@evikecom]

Yes this hopup will work with most Version-2 / M4-based systems.

[@the_toxiczombie1822]

Can I use this hopup on a G&G Firehawk without any change to the nozzle or anything

[@c30_hit-u33]

Will this hop up system work with Kwa Ronin t6 ????

[@evikecom]

Some modifications to the hopup unit may be required to work with the KWA AEG's.

[@Jacobff99]

How does it feed with a G&P m4 , my receiver is picky when it comes to hop up

[@Trenrabbit]

will this go in a scar l

[@theflyingguineapigfpv5812]

Is this good for the krytac vector

[@evikecom]

Not without heavy modification.

[@m1a1abramstank49]

I’m thinking of upgrading my EMG Helios M16A1 for accuracy. Will this work with the EMG Helios M16A1 stock nozzle or would I have to change the nozzle?

[@evikecom]

It should work with the stock nozzle.

[@Jy_X6]

Would this work for a tippman recon m4?

[@goofygamers7124]

Will this work on the King's arms pdw???

[@Kbaker11]

Will it work in my G&g arp9

[@evikecom]

Yes!

[@Juan-vn9fn]

Will this hop up work with krytac mags?

[@Valiant9336]

Nice “Cool Stuff” Matt

[@CallsignKoda146]

i just bought this for a project gun im working on like a week or two ago, wouldnt fit easily with k120's (which i bought at the same time) i think i have some compression issues (possibly the gun body is too small (seems really small for an airsoft receiver)

[@mikehancho6674]

Would this fit a EMG / KRYTAC / BARRETT Firearms REC7 DI AR15 AEG Training Rifle (Color: Flat Dark Earth / SBR / Go Airsoft Package)

[@evikecom]

Yes.

[@denzel5331]

Does this work on an army armament aug a3?

[@919Drones]

Video states "For barrel lengths 21mm-21.25mm. First I believe it's cm. Second don't think the range is only .25cm. Please help.

[@evikecom]

First - It is mm, not cm. 1:21 - Video states "...for nozzle lengths of 21mm to 21.25mm." The text on the lower portion of the screen should clarify. Second - Correct. The range is 0.25 millimeters. Third - To clarify: this hopup will work with any length AEG barrel. The measurements the video refers to is that of the nozzle (which is located on the front of the gearbox, and is responsible for chambering the BB. Fourth - no worries! We're here to help. You can contact us directly if you have questions: [e-mail] [phone] 7:00am to 5:00pm PST Monday through Friday

[@kiezen-_-3464]

So can I put this in an m4 eith a dial hop up??

[@lolforbob]

Ok so i bought this hopup, but i feel like o camt adjust it, no matter which number i put it on, my bb don't go upwrads, to go straight than down, but at a less long range than my stock hopup??? What did i do wrong. I have a bucking Prometheus purple aswell.

[@evikecom]

Did you put in the correct nub? It comes installed with the R-hop nub. If you need assistance, please contact [e-mail]

[@ILLSTB]

Can I install this directly into a G&G wild hog (7”) with no additional parts or are there other items I’d need for this to operate correctly?? NOTE: I’ve converted to hpa with this gun.

[@evikecom]

It should drop right in, no additional parts or items required.

[@ghostty7775]

Will this work for a elite force m4 cfr?

[@Malzanar2010]

I would if they were ever in stock

[@Furbyforthewin]

What's the song's title? It sounds pretty cool

[@grantglaze8664]

How dose one find out the nozzle size with out taking apart the gear box? I have a G&G CM16 Raider L 2.0E

[@thecrazyspud]

You could probably either email Evike or do a bit of googling. Seems like maybe about 21.4mm? I can't confirm but you might want to send that email.

[@xxhunterxgradyxx5792]

I ordered the iron shrike 1911 green gas version and I got it and it's got a faulty mag that doesnt fill properly that broke and the notch on the slide for the slide catch is rounded off so it doesnt even catch anymore. Please respond, I spent 130 on a gun I was expecting to work

[@evikecom]

If you ever experience an issue with a new product please contact us and we can help you. Take pictures or video of the issues so our techs may better assist you. www.evike.com/rma/ [e-mail] [phone] 7:00am to 5:00pm PST Monday through Friday

[@plsun7352]

If I purchase this will it come with everything I need? (except for the bucking) to assemble the hopup onto the inner barrel?

[@evikecom]

Yes.

[@peepeepoop1907]

Does this Hop Up work with KWA K120 Mags?

[@westcali9621]

So my question is what tracer unit would best fit a m4 Poseidon??it has a mock suppressor on it

[@BlackWolfessUSCM]

Cool buy i don't think I'm giving up my madbull ultimate hopip/tracer light housing combo.

[@dakotafones8949]

Is this compatible with the emg demo ranch?

[@evikecom]

Yes it is

[@dakotafones8949]

@@evikecom thank you!!! For the reply my local shop was really unsure of it was compatible glad that it is really looking forward to maxing this guns performance

[@pinoydad_0811]

Will this work on a g&g wild hog

[@evikecom]

Yes it should. Double-check with [e-mail] to be certain.

[@HeavyK_MXB]

Will this work with a cm16 raider? I also want to upgrade the inner barrel could you tell me my best bet for that as well? And what all else will I need to do it?

[@evikecom]

Hello! Yes, this should fit the Raider just fine. Contact [e-mail] for upgrade advice.

[@user-bg7xp8of4p]

Will it work on a PTS CM4?

[@evikecom]

Our tech team says "Probably not. KWA AEG's can be a little picky when it comes to hopup chambers."

[@user-bg7xp8of4p]

That’s what I thought :(

[@LuuLancelot]

What's the differences between these Pro and Sport in EMG hopups?

[@evikecom]

Primarily the 'BB catch' feature, which prevents BB's from falling out when the magazine is removed.

[@Misimer556]

Will this work with a matrix calico jack 350 fps? Thanks

[@evikecom]

Yes it should!

[@michaelr687]

Does this fit the kwa ronin t6

[@MotoRacer171]

Better than my prommy rotary hop?

[@natedogbb8815]

Will this fit in a ARP 9?

[@evikecom]

Yes.

[@alexheagle8106]

Would this be good on a KWA SR7?

[@owenlivengood9210]

Anyone know what types of guns this will fit in? Just m4s or is there some variety

[@evikecom]

Mostly just M4-style replicas. THere are a few others that are 'Version 2' compatible, and it may fit in those few, but yah, mostly just M4's. If you have more questions, please visit the FAQ page, or you can always contact us directly: www.evike.com/faq/ [e-mail] [phone] 7:00am to 5:00pm PST Monday through Friday

[@homeslice6330]

Hey what brand is the hop up in the emg Helios sr 16 and does it fit in the g&g srl

[@evikecom]

Helios SR16 is ARES OEM and the hopup chamber should work in a G&G SR16 since they are both VER.2, but you may experience FPS variance due to differences in nozzle length between the two manufacturers. If you have more questions, please visit the FAQ page, or you can always contact us directly: www.evike.com/faq/ [e-mail] [phone] 7:00am to 5:00pm PST Monday through Friday

[@Slicks_16]

mine came with a extra lever arm and a extra nub do I have to install those or can I just use the hopup how it is out of the box? (someone pls help me I have a game this saturday lol)

[@evikecom]

The instruction manual should say that it has the R-hop arm and nub installed out of the box. If you're using a normal bucking/nub, then you might need to install the other arm and nub. The manual should cover it. Call us if you have any questions - [phone] 7:00am to 5:00pm PST Monday through Friday

[@Slicks_16]

@@evikecom thank u evike!

[@derickjoel4736]

Will this work on a cybergun scar-L?

[@evikecom]

Not likely. Most Scar-style AEG's have a proprietary hopup. Please contact [e-mail] if you have further questions.

[@rayd386]

Would this work on a kwa vm4?

[@chaos817]

Does hooking up the Tracer to an external battery source burn it out?

[@evikecom]

Probably, since hooking it up directly to a power supply will mean that the light will always be on. Unless the circuit has a manual switch... contact [e-mail] for advice on this matter

[@KP_79]

Will any of their models fit a krytac kriss vector?

[@evikecom]

Not without heavy modification. Contact [e-mail] for parts compatibility.

[@Skilpadjie1]

But what is difference between this one and the already red one.

[@evikecom]

It's a color option. No significant performance difference.