This is what you have been waiting for.... The answer to "How do I make contacts? The bands are dead".... Support at patreon.com/hamradioconcepts SUBSCRIBE to HamRadioConcepts LIKE and SHARE on hamradioconcepts
Пікірлер: 644
@jamesmackinlay44775 жыл бұрын
I'm a truck driver now have a Yeasu Ft-891 and a Tarheel screwdriver antenna once about 3 months ago I was In driving through Atlanta Ga about 2am went to 10 meters 28.425 with 100 watts and put out a CQ. Talked to a guy in Australia for 30 minutes while driving 10 meters is like that sometimes that night reminded me when I was a kid could talk around the world on a watt.
@cdm1250uhf15 жыл бұрын
Yup, I've been on that boat. I love it.
@plugnalong21864 жыл бұрын
I've also been there. It was the early 60's on a 35 miliwatt walkie-talkie talked to the next state to the east of me about 350 miles away.
@paaao4 жыл бұрын
My longest contact ever was on 10 meters with 25 watts in 2017. San Diego to Vero beach Florida. Around 2000 miles, and blew my mind. The band was solid open that day. Talked to many others all over the south and mid west from west coast... Real conversations too, not just grid squares and 73s.
@mbtjr3 жыл бұрын
riiiight - hogwash
@JimN5QL5 жыл бұрын
Back in the early 80s I was up one night and decided to do some hamming. When I turned my rig on it was on 10 meters. I scanned a cross the band and there were absolutely no signals. Just for fun I picked a frequency and called CQ. After very few calls I was answered by a station in the Falkland islands. We talked for about 20 or 30 minutes and when I decided to sign off as soon as I did all I could hear was a beehive of stations waiting to snag the Falkland islands. I never got a qsl from him because about 2 weeks later was the invasion of the Falkland islands. So you are quite right a band is just as Dead as you make it! Don't be afraid to call CQ you never know what surprises lie out there!
@timb46555 жыл бұрын
Now thats a bit of history there ! I wonder if that station was the same ham that was sending reports to the British forces about the situation on the ground until the Argentines final caught on to him ? That's reminded me to go find out. great story 73 de M6IEH
@saralee24545 жыл бұрын
Watauga
@indridcold84334 жыл бұрын
The tragedy of today is we are in three coinciding solar lows. With a basic antenna vertical, very little can be heard above 15 megacycles. Even the VHF and UHF FM simplex and repeater frequencies are deserted. These are bleak times for any sort of radio hobby, whether just a scanner operator, 11 meter CB, 31 megacycle JAKT radio, 49 megacycle FM handheld wlakir talkies, MURS, LPR433, FRS, GMRS, PMR446, 480 FM CB, or all amateur bands above 15 megacycles. I have postponed getting my amateur radio license because radio conditions are so band and activity is extremely low. I do hear activity on 15 megacycles and lower. 3.860 megacycles is a very colourful frequency.
@jfv654 жыл бұрын
Did you record that conversation? Could be a nice addition to shortwavearchive.com
@indridcold84334 жыл бұрын
The 1980s were magnificent for radio. I often spoke from Prince Edward Island to Mexico with three watts AM on just a lowly citizen's band walkie talkie. Today, no amount of power will do any good except for just around the local area. I can only hear international conversations below 15 megacycles. I have hesitated to get an amateur radio license because the bands above 15 megacycles are dead, save sometimes 2 meters. The entry level amateur radio license exam concentrates rather heavily on HF theory and bands. But the entry level license offers no HF privileges, save a tiny segment in 10 meters and tiny fragments of CW band segments. That is rather like getting a motor vehicle operator's license and only be able to operate a motorized bicycle but be tested on all motor vehicle operation. It seems ridiculous to me. Thus, I hesitate. Citizen's band is just as locked down as the HF bands above 15 megacycles.
@indridcold84334 жыл бұрын
I called CQ on MURS channel 3. It got people talking back and forth for the entire day and into the night. The first answer back to me was someone saying, "We do not call CQ on MURS." But, from there it just spread. The radio was not even mine. It belongs to work. But at home it became a party line for the rural environment I live. People started arguing, why not call CQ on MURS? Then someone started saying, you can use sideband here as well but they did not have any idea where to get a sideband radio. Someone then said that data is allowed as well. But they did not know how to do it. I just sat back and listened for a long time, every once in awhile saying a few things since I did not have the charger for the radio. Then the peppers got on and instead of running everyone off, they started testing range limits with those that wanted to drive away with their radio. There were even amateur radio operators talking about how their amateur radio can transmit MURS but they have to turn down the power to, I think, two watts and how it was on the grey zone of legality but nobody would care. Nobody got mad with each other. The amateur radio operators told us how to make antennas for MURS, and how to link a TNC to the radio. It was a great time. There were even some people retransmitting FRS traffic to MURS band by holding the two radios together. It was a blast for us. There were even talks of setting up a weekly MURS get together on the air. Since the radio is not mine, I do not always bring it home. But next time I will be calling CQ on channel 3 again.
@isaacleeper31273 жыл бұрын
Grab yourself a little Boafeng and a big ABREE folding antenna for under $50.
@vizon-aryproductions61913 жыл бұрын
do a live podcast that would be so cool!!!!!
@deltahotelxray5 жыл бұрын
"..this is how to turn the bands on.." - Presses power button.
@furion..4 жыл бұрын
NO! That's what I do when I want to put out more *power* - I hit the button marked, *"Power"!*
@jasontheflyingfarrierhays3 жыл бұрын
As someone who is ABSOLUTELY a day old new into HAM radio research, what the hell was all that 😂
@jantona3 жыл бұрын
CQ means looking for any contact, contesting means you just want to contact as many people as you can in a period of time so calling CQ is a good approach to that. Echo Lima 97 is a QTH area code meaning central FL, you can look those up at k7fry.com/grid/ The rest is over my head too 😅
@TonyYarusso3 жыл бұрын
You’re hearing his callsign and location and the other station’s callsign and location, which is the “exchange” for this particular contest. Confusing matters a bit is that the other stations are often using non-standard phonetics, but it’s the same information.
@Robnord14 жыл бұрын
Nice! My father was a long time HAM operator in the late 50's, 60's, and early 70's. He built much of his own equipment, and we spent much quality time in the shack when he would get home from work. CQ CQ CQ. Whiskey 4 Dog Yolk Charlie calling CQ on __ meters. Glowing vacuum tubes, partially smoked cigs in the ashtray, and conversations with stations around the world. Good times.
@thelegoguy-xp3ie4 жыл бұрын
Oh man! That was a day in my life!!! W7MR was my father & recently became a silent key. I was fortunate to get his Collins equipment. Not sure what I will ever do with it, but it could light up a nation!
@Locomotore993 жыл бұрын
Reminds me of a movie I saw years ago. I think it was called "Frequency".
@redf72092 жыл бұрын
That's the way i remember it with my grandad, he fixed his old RCA himself when valves went. It came from an American WW2 destroyer. He never transmitted but he was technically capable as his own father had ran a radio repair shop. Still have the RCA but scared it might be too fragile to use and very heavy. He used to have a big world map and we charted with map pins every contact he picked up.
@CharlesKrueger4 жыл бұрын
This applies to VHF UHF as well with your Hand Talkie. I called CQ on simplex on a mountain in Santa Fe, NM and got a contact back from 65 miles away almost immediately while the frequency was completely quite for the 10 minutes prior when I first turned on the radio.
@HamRadioDX5 жыл бұрын
Completely agree. Everyone needs to call CQ. I’ve done so on 6 meters expecting no reply and had a ton of contacts come back! Thanks Eric 👍
@larryhaviland17964 жыл бұрын
This is my first time listening to a HAM radio exchange. Very informative and actually exciting. Thanks!
@BruceNitroxpro3 жыл бұрын
larry haviland , And you WOULD listen to inscrutable contest babble... LOL God bless, they DO speak normally, too! de KQ2E
@CharlesHuse4 жыл бұрын
Hint...if you are getting started in ham radio, like I am, and want to keep your HF rig costs in the sub-$1k range, don't get an HF radio with a scope. And if your rig is already in that category and you want to add a scope, I suggest adding an RSP1A from SDRplay to your shack. 2 connections, an SMA antenna jack and a USB 2.0 type B socket. Hook an antenna up, plug into your PC, and not only do you have a wide range receiver (1kHz-2GHz), you have the a full function scope right on your computer screen. And the best part is that this little gem is about $120 USD retail. Runs on Mac, Windows, and Linux.
@alanlangford46675 жыл бұрын
As a kid in the 70’s I used to listen to ham radios on my shortwave radio. When sideband was introduced I was able to listen by tuning another radio to same frequency and with a little fine tuning could listen in. Back then CQ was only way to find any one on frequency. My how radios have changed since those early years. One guy I listened to here in Australia had a homemade valve set on a “breadboard” if you remember what that means. 🙂🙂
@RamLaska4 жыл бұрын
Wait, tell me how you tuned into SSB using two radios! That sounds fascinating!!
@westsideflyer75595 жыл бұрын
Great point. The waterfall is a great tool used in discretion. If you are calling CQ like mad and not getting returns, you can see if anyone else is on and where they are. However, your point is well taken. If no one is calling CQ (or involved in a QSO) they won't be seen on the scope but they are there and want to have a QSO. It's like at a school dance. Boys line one wall, girls line another wall. Everyone wants to dance but no one asks anyone to dance so no one dances. But, when a few daring people get it started, others are encouraged to give it a try. So, call CQ!
@HamRadioConcepts5 жыл бұрын
WOW, what an amazing example.. LOL... You are right 100%
@thomasmaughan47984 жыл бұрын
Older hams know that you first listen to see if the frequency is clear. A QSO (conversation) may be underway and you are not hearing half of it (or all of it) and if you go stomp out there with a CQ you might be on someone's frequency. A more correct procedure is to ask, "Is this frequency in use?" and give it a second or two *then* call CQ. Oh, he did that. Well, good for the operator.
@scharkalvin5 жыл бұрын
Operating during a contest means having a lot of ears on the band. That helps a lot!
@HamRadioConcepts5 жыл бұрын
Which is the next video topic uploading in moments
@JimN5QL5 жыл бұрын
Why heck!
@mikeries85495 жыл бұрын
Operating during field-day? That's a blast!
@papajaystinkershop754 жыл бұрын
I remember hearing CQ a lot back in the '70s. One of my Uncle's was a Deputy Sheriff, he gave me a SW radio that also covered the police bands for Christmas 1969. That was when I also discovered HAM radio.
@cflat33555 жыл бұрын
3:44 I hate when people do not use proper phonetics. The phonetic standard exists so weak audio signals can be clearly understood. When someone uses things like "America" instead of Alpha, it can be confusing if they are hard to copy.
@theunconventionaldeal38794 жыл бұрын
America, Barbera, Canada, deleware, envelope. I break contact when I hear wierd nonsense.
@iainmeteorscan15554 жыл бұрын
@@theunconventionaldeal3879 @TheUnconventialDeal: I couldn’t agree more! I have lost count of the number of stations I have ignored when they call out with ridiculous phonetics. More usually those stations turn out to be supercilious, uninteresting operators.
@JanPeterson4 жыл бұрын
Yeah, check out the "phoneyetic" alphabet... A as in Are, B as in Bee, etc.
@lt43244 жыл бұрын
I am with you guys 100% ! I corrected a NEW ham once and he got offended, lol. All I said was please use the proper phonetics because you are new to the hobby and I would like you to use them correctly and this "newbie" stated: I will use what is easier and sounds cooler to me" AND here was my response: Cooler? and then LOL on air and then I ended the QSO BUT still gave him a 73 before ending. (not much of a reply, but I hate to get into arguments on ham radio) By the way, he did ask for a signal report before ending and I told him he was "Loud and clear and sounded cool" I just had to do it guys! LOL This is NOT only related to new hams but OLD and or veterans of the hobby as well! Pathetic IMO. So many change the actual meaning of a letter you'd swear they are referring to something other than the actual "Letter" if you know what I mean. Geeze, sorry I could go on so much more. Best 73 DE KD6SBR (KD6 Stop Bangin Rita) LOL, Tom in NV
@jimm85964 жыл бұрын
Definitely a group of elitist dbags here. You guys are definitely the demise of ham radio. Can't have a proper QSO because their phonetics aren't easy enough to copy? Being jerks so you can correct and berate someone because YOU want them to do it YOUR way. You guys are definitely laughable at best and an embarrassment to the rest of us that enjoy a QSO without the need to correct and discourage anyone in the process.
@MirlitronOne4 жыл бұрын
As G2KQ has said, "Forget propagation - the activity of any band is directly proportional to the number of amateurs prepared to switch on their transmitters."
@walterbrown86944 жыл бұрын
Calling CQ was the normal way of making virtually all contacts on Ham radio during the 1940's and '50s. Furthermore, most Ham radio operation in those days was on HF, and until the 1950s, all rigs were vacuum tube design/construction. Oscilloscopes were expensive, and there were no radios with panoramic signal displays, except perhaps in laboratories or perhaps some "shacks" of well heeled hams.
@Chaiboogie5 жыл бұрын
As a BRAND NEW Ham, I concur! I've always wanted to do simplex but never heard any activity on the simplex frequencies. One day I just came home, grabbed the radio and started calling... And had the BEST QSO I've had to date. Since then I've gotten tons of simplex contacts... By just calling! Funny how that works!! Great video! 73 N5YCE
@DJChrisArgueta5 жыл бұрын
Cha-kei Wimberly I’ve seen it all now, Techs with vanity calls. Your advice is spot on, though. Congrats on getting your ticket. Party on.
@Chaiboogie5 жыл бұрын
Chris Argueta KI6AMK thanks!!! I’m having a blast! Studying for my General... looking to sit for that exam by summer’s end! Should be fun! 73!
@ThePaulv125 жыл бұрын
@@DJChrisArgueta this is why everyone listens.
@kenausten19125 жыл бұрын
Well years ago repeaters did not exist. We called CQ even when mobile and produced many qso's. I had built a HealthKit 6 Channel 2m txrx in about 1975. Suddenly repeaters appeared one by one and we never heard any simplex single after that as everyone monitored the repeaters.
@n8nkqrp5953 жыл бұрын
This video is WONDERFUL Eric. I have had the same exact experience on dead bands.. and in particular, 6m. You don't need anything fancy for an antenna, either: my 6m antenna is a piece of wire, less than 5' long, added to my Michigan Cacti. In other words, my antenna is 4' 8" high and cost about 3 cents. lol.
@brianmaier75295 жыл бұрын
What type of antenna are you using in this video?
@sphexes2 жыл бұрын
Nice setup. I did exactly this on 144.2, 50.125 and even 146.52..... Not one person! I did work many from the top of Mt Mitchell and Skyline drive a few days ago. That was a blast. I had a ton of contacts in very little time.
@buckeye57045 жыл бұрын
Genius, Eric. Genius! Haha. No scopes for me for now. TS 440 and a TS 480 SAT. Old school.
@justanotherguy38505 жыл бұрын
As an extra class we will often gather down at the low end of 75 meters at about 9 p.m. local on about 3650 and do SSB. We would have a contest to see who could turn their amps off and still be heard reasonably well. We often did this in conjunction with an EchoLink feed that was a programmable radio in Erie, Pennsylvania. Being on the West Coast we would dial up Erie, Pennsylvania and see who could be heard the loudest without running power or with the least amount of power. Almost night after night we could consistently hit the remote tunable transceiver. I was usually one of the Kings. Don't know why either because I was only using a wire antenna. Maybe because I oriented it for East / West Communications. we could also hear the Japanese fisherman loud and clear working up near Russia in the Bering Straits. But the point I am making is that the bands are not necessarily dead, just as this video is making! If we can hit a remote receiver two-thirds of the way across the United States or further with 100 Watts PEP you really can't say the bands are dead. Maybe the ham behind them has gone to bed already or like some figures the bands are dead so why Try. Try! If you want to be a real ham in my opinion, avoid switching to ft8 because it's so easy. Improve your skills by trying something harder is what I'm saying. All you do with FT8 is your software exchanges a handshake, your software sends them a signal and then gets one back and then your software terminates to contact. All you do is click a mouse. That's not ham radio. if you don't like that idea try working some satellites! all you need are some inexpensive to meter and 440 antennas that you can point up at the line of orbit. There's all kinds of things that you can do to drum up a QSO on ham radio. If all else fails, you can switch down to the CB Radio band... Just kidding! You didn't work too hard too go play on the kiddie radios. Breaker breaker 7230. Anybody got the ears on?
@flyboybobio34315 жыл бұрын
So so true Eric. Preaching to the choir. Keep up the good work.
@mayomayo73185 жыл бұрын
If more guys would call CQ instead of only looking on the cluster there would be more action on the band(s).....73's YDX
@carmenmorgan93725 жыл бұрын
KJ4YZI FROM KA7FFF, well sir back in my beginning I used2 try that on all sorts of bands!! and even with no criminal malice or activities on my part!! one ham radio extra be in avondale,az took it upon himself to have me run off of ham radio,and with the help of a few disgruntled followers who had nothing better to do he dammed near has!! his stalking and slander got me barred from one club!! the other club was too afraid to oppose his evil knowing PL tone jamming would b/a consequence!! so yeah,I'm a lone wolf in the wasteland of unoccupied repeaters!! and the memory of my former rv motor home destroyed by their arson!! so thankyou for your little bit of info and time!! it's not like something I haven't heard or tried myself!!
@africantwin1735 жыл бұрын
Many hams dont have all bands. Where i live most general can use 10 up to 40. Half bands only. I think that if general class hams can use all bands there would be more traffic on hf. Also ham radio in my area is dying
@mayomayo73185 жыл бұрын
How com the US boys work OE on 40 all night....
@Isochest4 жыл бұрын
@@carmenmorgan9372 Sounds like Narcissistic/Psychopathic behavior on his part. As for the arson he and his flying monkeys should be locked up
@carmenmorgan93724 жыл бұрын
@@Isochest thankyou sir!! but the deputies saying arson is one thing!! proof as to who in particular is a whole other ballgame!! but again,thankyou sir!!🥰*HUGS*
@suryatejas30135 жыл бұрын
What modulation are you using in the video?
@daveborchard20195 жыл бұрын
Checking the FT8 frequencies is a good way to check for band openings. On the higher bands, even with FT8, you need to try calling CQ to create some activity. I’ve called CQ many times on 15 meter through 6 meters when the bands appeared to be dead, and sometimes the bands are open a little bit. It’s too bad that AMTOR ARQ fell out of usage. That was a great mode for rag chewing that works great in these low sunspot years. Your AMTOR ARQ signal simply rides the QSB, and you have perfect copy, but the data rate slows down during the QSB fades, then speeds up.
@MichaelLloyd5 жыл бұрын
JS8Call is out there now. You can have a QSO with the FT8 mode using JS8Call
@daveborchard20195 жыл бұрын
@@MichaelLloyd I've tried JS8CALL several times. The problem with JS8CALL is that the data flow rate is very slow. It's like doing a 5 wpm Novice QSO. A rag chew is RST, name, qth, rig, and antenna, then about a half hour of time went by and it's time to QRT. That's not a rag chew QSO, that's just the first transmission of a rag chew QSO. The data flow rate with AMTOR ARQ is dramatically faster than JS8CALL. The other problem with JS8CALL is that it's a very unpopular mode. There's almost no one that ever uses JS8CALL. The QSO party days helps increase JS8CALL activity a little bit, then no one uses it again. For some reason unknown to me, the modern computers require an expensive TNC interface to communicate with AMTOR ARQ. About three decades ago, I was able to use a simple AEA CP-1 interface box, a Commodore 64 computer, and an MBA-TOR software cartridge.
@MichaelLloyd5 жыл бұрын
@@daveborchard2019 It sounds like we've had similar experiences with JS8CALL. I haven't used it much at all since it came out of Beta. How does AMTOR ARQ compare to PSK31 or RTTY? Nothing against any mode, but, I stick with FT8, CW, and SSB depending on band conditions and what I feel like working.
@daveborchard20195 жыл бұрын
@@MichaelLloyd AMTOR ARQ worked much better than SSB, CW, or PSK-31. I don't know if AMTOR ARQ would be as good as FT8 is at working under poor conditions, maybe. When I used AMTOR, and the 20 meter band was closing for the the night, the QSB would get deeper and longer in the fades. The AMTOR data flow rate would speed up and slow down with the QSB, and ride the QSB. You could reduce your power and immediate know just how good the band conditions were because sometimes the power could be reduced to near zero and the data flow rate would slow down. Other times, the data flow rate would slow down. Normally, it was perfect error free copy. When the 20 meter band closed for the night, the AMTOR ARQ stations were the last stations on the band, long after all the SSB and CW stations gave up, just like FT8 stations are now the last stations on the 20 meter band late at night. When PSK-31 first came out, AMTOR was still being used. I tried using PSK-31 back then and was disappointed how poorly PSK-31 worked under poor signal conditions compared to AMTOR ARQ. You can hear AMTOR ARQ and see it in action if you search KZbin for "AMTOR". I thought about trying to buy a Commodore 64 computer so that I could get back on AMTOR ARQ again with my MBA-TOR software cartridge and AEA CP-1 interface. But finding a Commodore 64 computer that actually works might be hard, because the electronic devices that old aren't reliable anymore. The new computers require TNC interfaces, which are $400 to $600. The really expensive TNC interfaces are $1,200 to $1,800. I've seen AMTOR FEC on some of the free ham radio software, but haven't seen AMTOR ARQ. You use AMTOR FEC to call CQ, then AMTOR ARQ for the QSO. AMTOR FEC could be used for round tables. However, AMTOR ARQ is dramatically more robust than AMTOR FEC. Sometimes, you couldn't even hear the AMTOR ARQ signal in the speaker and the signal would be perfect, error free copy at a decent data flow rate. JS8CALL will never be a good rag chew digital mode, because it's simply too slow, just like Olivia is just too slow. It's really disappointing that AMTOR ARQ isn't commonly used anymore. AMTOR ARQ would be the perfect solution for the low sunspot years, and poor band conditions. Today's HF radios have very quiet T/R relays, which are much quieter than the old clunky and noisy T/R relays. But the lack of soundcard software for AMTOR, and the need for an expensive TNC interface box is probably going to prevent hams from using AMTOR ARQ again, even though it would be the best mode for poor band conditions. KY0L
@MichaelLloyd5 жыл бұрын
@@daveborchard2019 If you want a Kantronics TNC (I don't recall which one) to play with I have one that I would be happy to send to you, no cost, no return required. I bought it when I was first licensed and didn't ever use it because I got into CW pretty deep (I wish I had kept that up. The catch is that it'll probably be July before I can send it. My email is good on QRZ. de NE5U
@rossbassette75185 жыл бұрын
Some Hams keep a dedicated radio in their shack tuned to 6 meters to continually monitor for band openings. It never hurts to try calling CQ, since someone might be listening.
@DJChrisArgueta5 жыл бұрын
Ross Bassette why 6 meters, specifically? It’s funny, I ask because I just built a tuned 6 meter dipole. “Why a 6 meter dipole?” you ask. I only have to raise it 9’ off the ground.
@MichaelLloyd5 жыл бұрын
The magic band. When I'm home I have it tuned up.
@rossbassette75185 жыл бұрын
@@DJChrisArgueta The six meter band normally shows HF propagation during periods of high sunspot activity. Currently, we are about in the middle of the 12 year cycle of low sunspot activity. The VHF bands, including six meters, are more useful for HF propagation during periods of high sunspot activity. However, during the summer months, HF propagation in the VHF frequencies can be seen. In addition, propagation on six meters will sporadically appear, without warning - hence hams monitor the band for openings on an ongoing basis. You are smart to have that antenna in your arsenal. A six meter dipole is a heck of a lot easier to install than a 40 or 80 meter dipole. When the six meter band opens, you can sometimes see a lot of activity and DX contacts from great distances
@jimmeeGray5 жыл бұрын
Exactly
@cdm1250uhf15 жыл бұрын
I have my tv 71a dedicated to 146.52, i never change the frequency.
@vicc67445 жыл бұрын
We just comp Field Day and this is what we did and we had a great time- made a bunch of contacts - good video
@r.a.hassel80063 жыл бұрын
Yes I have been doing this for 25 years, just chucking a signal out into the air, and even if the band is dead for long distance propagation, I still always manage to score a contact with another local station.
@jamesk0ua3 жыл бұрын
Don't forget on "dead bands" you can set up one of your voice memories to call CQ, then pause for a programmable period of time and repeat calling CQ. You can solder something on your bench while it calls for you :) If someone reply's, just bump the ptt will make it stop or press the icon on the screen if someone answers you. It can really save your voice and you can make more "noise" on the "dead band" to attract attention. With 8 memories you can actually set up a contest style QSO without ever saying a word in real time. Of course that concept works in CW or RTTY modes as well. 73 de James KØUA
@midnightcaller2005 жыл бұрын
I have a ham friend who makes his own HF antennas,and says you "Need to Make Noise on the band,a good example of that I made a CQ on 10 meters one day 10 meters was dead,but a person from Montana came back to me I never would have made the contact if I did not call CQ I'm from the Everett Wa area So make some noise call CQ and you would be surprise
@neildombroe36004 жыл бұрын
I heard you do the CQ demo and alternative to “scoping” It’s hard to hear call signs sometimes. How do you train yourself to hear well or do I need a better antenna or unit ?
@jeepien4 жыл бұрын
You get better with practice. I was a full time Army MARS op in Vietnam in 1971, and I was carrying on a QSO with a stateside ham under poor conditions waiting for the band to get good enough to run phone patches. A guy walks into the station and watches for a few minutes. I stop to talk to him and he says, "I thought you were taking to yourself. I could not hear a thing but static coming out of the radio (Collins S-line).". The human brain has fancier active filters than any rig.
@drnv1505 жыл бұрын
Was on 20 meters after 11:00 PM last night, I'm out west, had a station in Colorado, 20 to 30 over 9 at the same time stations from New Zealand and South Pacific up the band, worked these stations with a 3 ft diameter home made magnetic loop running 90 watts. The bands are not near as dead as the number of operators on the air.
@RobDTom5 жыл бұрын
Keep preaching it brother!
@largonutke0vxl6355 жыл бұрын
This is great info! I’m just getting started and really appreciate your channel.
@JonathanAdami2 жыл бұрын
OCD is like "why isn't the time the same on both radios?" hahaha
@normjacques68534 жыл бұрын
LMAO!! Thanks, Eric! Love it! I look at it this way: When you look at your 'scope' and see a flat line, your CQ call is going to stick out and attract all of the 'scopeheads!' Problem solved! You're a genius! LOL Love the channel, Eric! 73 :-)
@neilyoung16735 жыл бұрын
Wow quite surprising this. I can't wait to get myself another icom . I have my set up years ago. Sadly missed. I had an icom ic735 and an antron 99 was mainly good for 20meter but awesome
@kentwilliams41525 жыл бұрын
Nice Rig setup! Looking forward to both of them in the future. Now a Ten-Tec Argonaut and a TS-530. - 73 es dx de K8QLW/4
@HamRadioDX4 жыл бұрын
6 meters featured in the entirety of this video - love it. Favorite band
@ftlaud9115 жыл бұрын
Been monitoring bands past 20m with scope and they seemed dead. I am shocked by your results. Going to throw out CQ's in a few minutes and see what happens. Thanks for the heads up.
@eugenecbell5 жыл бұрын
How were your results?
@ftlaud9115 жыл бұрын
@@eugenecbell - So what I figured out is that I am 100% a scope head. Never realized it until he mentioned it in the video. Since then I am aware now that I like to scan the band and switch frequencies to see what is going on. Great for DX by the way. To answer your question - I have spent a couple minutes each day around the frequency in the video calling CQ (50.125 is suppose to be SSB calling per AARL band plan). I have gotten exactly no calls back - zero!!! :-( The bands are dead...lol....just kidding
@babyboysmash66154 жыл бұрын
the old ham radio makes me feel good.
@Stuff_happens5 жыл бұрын
Yes. I have wondered that myself. When 20 meters goes “dead” after greyline, I have noticed everyone jumps on 40 meters right away.
@hillbilly4christ6383 жыл бұрын
I was gifted a crystal radio kit when I was 10yrs and I have been interested in radio ever since.
@VE3DAL2 жыл бұрын
I liked your approach! Thank you for this vid.
@richardrice81724 жыл бұрын
Eric what antenna would you use on a 50 sailboat mast to run 10 meter new ham kf4oog ?
@nateo2004 жыл бұрын
I admit I look on the cluster but I think the contacts I enjoyed the most were casually calling CQ into my EFHW with 45watts and getting Croatia on 15 meters....or perhaps my very first HF contact on 20 meters to the Canary Islands. More effort than sitting on 40 meters in the afternoon? Probably, but much more rewarding. I don't have room for a 40 meter antenna to get high enough so 20 meters and 15 meters when the band isn't "dead" are great!
@TonyLing4 жыл бұрын
I figure half the reason those guys all came back to you is because they all had bandscopes :-)
@elkabong64294 жыл бұрын
Or, they were tuning around and LISTENING!
@jimmeeGray5 жыл бұрын
I've been using the same method for years. Since 1992 i think. I would key my mic and call cq. Never have i used a scope to find someone to talk to. The radio i currently have has a scope but i prefer to be the signal than stare at the radio looking for one. Good video...73 de 8P6DY/W2 ocala fl.
@tomloughney72535 жыл бұрын
Nice little run there. Definitely call CQ because it usually works. You should work on that S3 noise floor you have. You would hear more and see more on your scope/waterfall. 7300 has a receiver way above its' price point.
@robertfrawley5 жыл бұрын
I've said that for years, i think it excites the ionosphere
@jaym13012 жыл бұрын
Before I even watched the video I knew you were going to say "call CQ." It's like a self-fulfilling prophesy.Nobody's talking because "the band is dead" and the reason the band is dead is because nobody's talking. You'll never make contacts if you don't key the mic.
@pd1jdw6305 жыл бұрын
Ok , here by I call it. Patent Pending. 73 PD1JDW
@OregonDX4 жыл бұрын
What model is the vhf unit on the right?
@charlesvickers4804 Жыл бұрын
I often regret not learning this , though it was a constant growing up. Dad hand built so much of his own equipment. I still have a cb radio here that he hand built the relays. Wish I knew where all his qsl cards got to. I know there were 8 or 10 shoe boxes full indexed . He had an oscilloscope big as a dorm refrigerator. He operates on a long line a big stick and a set of Mosely stack threes on a 30 foot tower. The entire house was wired. In the mid 70s with old bell telephone equipment salvaged from a demolished building. He could lock and unlock the house turn on the coffee pot ,TV and most of the other appliances in the house including the HVAC thermostat. The way I understand what he was doing was through a phone patch and some kind of repeater that activated different relays in the old bell system. He was even able to rotate the stack threes to his location across town this way. A literal ton of equipment back then that we do the same from the palm of our hand. All the radios were integrated the wall was one giant radio. The home built parabolic mics , there wasn't a sound missed for blocks. We could hear conversation on the decks of river boats on the Ohio river over a half mile away.
@scottbelcher90263 жыл бұрын
Brilliant!!! Very interesting!!! Thank you!
@Tubi_com3 жыл бұрын
Nice job. Thanks for the encouragement.
@groovy38705 жыл бұрын
I'm just a trucker but that display on your rig is pretty cool looking.
@100pyatt5 жыл бұрын
Get your amateur ticket!! It's easy !!
@MukYJ4 жыл бұрын
I love my 7300!
@g3cwi_Radio_Adventures4 жыл бұрын
Great production values. I need to work far harder on my ham radio videos!
@FredGarvin-gr3vx3 жыл бұрын
Good tips.. Also, If the ic-7300 had a triple band-stack register, you would be able to jump back and forth between 50.125, 50.095, 50.125 + -.... Or park the 50.095 (middle of the cw subband) freq on a 'regular beacon catch' frequency in your area. Because the 7300 does not have this common feature, you could alternatively place 50.125, 50.130, 50.135, 50.095, 50.313, 50.293(wspr), 50.26(meteor call ch), and a few beacons in the memory positions for 'quick prop checking'..73, n6spp
@tamimaliraqii3 жыл бұрын
LOOOL I watched the video again the second time after learning more about amateur radio and I just discovered that revealing your secret was a sarcastic joke hahahahaha! Great video buddy, keep up the good work! :D
@davep69774 жыл бұрын
This is ham. Good old analog communications. This is exciting! Yes I have DMR, but that's like making a phone call. I like radio that doesn't involve a network or wires. I was talking to someone the other day and he said I talked to Argentina. I said what band? on ssb?. No on Fusion. He said what a great advancement. I said hell I did that in the 70's. I picked up my cordless phone which talked to my base station which was plugged into the wall phone lines and talked to a friend in California on his cordless phone. We used rf to connect via phone lines. Isn't that the same thing? So was I a ham before I ever got my license?
@davidsradioroom96785 жыл бұрын
You make an excellent point. Call CQ!
@andytoss80633 жыл бұрын
Or your dog if it is time to go for a walk.
@shaofuchang5155 жыл бұрын
Do you have to present the EL97 grid marker for 6m only or.... do you put the call up for all bands. Usually I just say QTH Central Florida, pardon my ignorance. 73 de KN4GEI
@HamRadioConcepts5 жыл бұрын
I think for VHF you use the grid because of the fact that 2m and 70cm and higher only make it statewide sometimes multistate. 6 meters can be worldwide, but for the "contest" log i think grid is required.. Same for satellite, instead of shouting "Tuscaloosa Alabama" it is just the grid (Whichever that is for AL)
@grampabadger2 жыл бұрын
I often sit at the radio and just call CQ on bands with no 'discernible' activity. It is 5:42 AM in the mountains of Colorado right now and I am on with a station in New Zealand. I have had contacts with Antarctica, Australia and Hawaii during the last 4 hours. Operators are there, but maybe not in your time zone, so the best chance for a contact is in some other country where they might be up and listening. Often I must call CQ for more than 10 minutes, but what else is there to do this time of the morning? You don't become a HAM to talk to the same stations all the time, anyway, so take a chance and talk to someone you never met. Use modes you haven't used before. I consistently make contact on digital modes such as RTTY, JT-65 and others when the voice bands are both crowded and 'dead'. Amateur radio is a great hobby and it can be a service and there are many more enjoyable scenarios than contesting. You don't need a huge antenna or an amp, either. Go for it and upgrade when you can.
@DutchmanRadio4 жыл бұрын
That waterfall display is beautiful 😍
@sudbuddiesexteriordetailin9843Ай бұрын
Right? No noise at all. I turn on my SDR and it's yellow with freckles. LoL
@mikeloce5 жыл бұрын
Right on Eric! Am still looking for my HF/6 m rig and this is an inspiring vid. 7 3, Mike, W1LOC, FN42.
@gabrielM11113 жыл бұрын
How many watts are you putting out?
@sithlord50455 жыл бұрын
It's 3am, why am I watching this, I have work in 4 hours.
@cannaroe12134 жыл бұрын
I don't even have a radio :/
@HamRadioConcepts4 жыл бұрын
@@patrickwall8517 OMG hahahahahaha That was AWESOME BRO
@HamRadioConcepts4 жыл бұрын
@@patrickwall8517 im still laughing
@mlr061219744 жыл бұрын
Don’t feel bad canna roe. I’ve had my license since 2007 and no radio yet. KE5MUG
@Link-channel4 жыл бұрын
Same here
@thomasvalenta64264 жыл бұрын
Dude Both of my parents are ham radio operators they whould absolutely Love this they don't even know that KZbin has ham radio videos !!! They whould absolutely Love this I'm going to have to tell them about this !!! I actually learned something from watching this video I learned that looking into the dead zones on ham radio is vary simply all you have to do is call CQ !!! This video is absolutely Epic Awsome !!! Love it !!! Much Love Dude you Rock !!! My parents Always said that they whanted Me to become A Ham Radio Operater too just like them !!! Awsome !!!
@DutchmanRadio4 жыл бұрын
Thomas Valenta yeah! We’re out in the wild! 😋
@joejacobs35373 жыл бұрын
The other operator was so thrilled,lol
@UR4NWW4 жыл бұрын
TNX for video!
@kingsqueak22214 жыл бұрын
So true, and a voice keyer is great because you can loop it and annoy people into answering. I happen to like regional/local comms and VHF simplex whether FM or SSB is fun to play with but so few people monitor, but if you aren't calling, you'll never find anyone.
@DavidS-iw4ei5 жыл бұрын
Nice Job.. Just key up and see what happens... You never know. I keep telling my friends. That 6M is the magic band..
@cinibar5 жыл бұрын
Glad it worked for you! I've heard beacons on 6 and called cq, allot, but no answers. Mother nature isn't nice all the time! 73...
@r.hooper23555 жыл бұрын
Funny But true. And thanks for the video. As a new ham this is very helpful 73 KN4UHA Hoop
@jakep51215 жыл бұрын
Ironically, i just sent this to a new ham buddy of mine.
@tom_olofsson5 жыл бұрын
I am glad I took notes. 😎
@nvrumi5 жыл бұрын
If you don't push the button, you can't make a contact. I have a friend whom I don't think has logged a single contact. He sometimes will talk on the repeater or make a VHF/FM contact with me. But I don't think he's logged a single HF contact. I keep telling him "push the f*#@ing button!" Fun video and I'm glad I watched. Thanks.
@Chaiboogie5 жыл бұрын
David Thompson 😂😂😂 @ "push the f*#@ing button!" Instant classic!! 😂😂😂
@quintonritter95395 жыл бұрын
My first ever QSO was on a 10m opening with a guy in South America from Indiana. 😂 that was 2 months ago with my mentor beside me just after getting my call. Just passed my general yesterday. Excited to work some HF
@goodcitizen5 жыл бұрын
Well played!
@redf72092 жыл бұрын
How do you deal with the situation where your own signal is powerful enough to attract lots of contact but contacts that are too weak for you to decipher ID or speech when they reply?
@Bernard-John5 жыл бұрын
hi,good video,totally agree,i do what i can,keep up the work,love the scope.
@keoni37 Жыл бұрын
Licensed 61 years ago used 50w cw only xmtr called CQ all the time as it was the easiest way to make contacts with that setup. Even now don't have a radio with a "waterfall"! WH6ELX in Hawai'i 1962 now NI7U in WA State. Oh and CW is still my fav mode.
@steveg47934 жыл бұрын
I like your sense of humor👍 Amazing is it not! I think the key is too stay on long enough for someones scanner to pick up the signal. 👍 73,s from ozz
@andytoss80633 жыл бұрын
Lol, depends on how many hours you are prepared to wait.
@machfive916Ай бұрын
Great video and great advice.
@DL2SDR4 жыл бұрын
Thanks so much! I didn't know what the microphone is for. ;-) 73 DL2SDR
@tsm63362 жыл бұрын
EL97. Is that a 7300. What antenna system are you using
@yanihartley52045 жыл бұрын
Yes so true in what you say....well done
@andytoss80633 жыл бұрын
What did he say?
@kpappa2 жыл бұрын
What antenna ?
@elkabong64294 жыл бұрын
This video has reinforced my belief that I DON'T need a new rig with a scope (although I was thinking about the 7300 recently), so thanks for saving me some money! 73 de W4PKR
@loctite222ms5 жыл бұрын
It's HAM. Making contacts doesn't make money, in fact it would be against regulations to make money. Sarcasm aside, you're making a valid point. Question comes up probably half serious in SETI. What if everyone is just listening?
@elkabong64294 жыл бұрын
LOL! The same thing is true on the repeaters. Too many times I hear or read hams saying "the repeaters are dead, I say my call sign and "monitoring" and no one responds!" Well, they aren't all that wrong, because oftentimes, if the local hams don't recognize your voice or call sign, they won't come back if you say "monitoring" or "listening". However, if I am in an unfamiliar location, I put out my call sign and I say "anyone for a QSO?" or, "Can anyone come back to me, please?" or something along those lines and I almost ALWAYS get a response! The fact is that hams are kind of shy and retiring and, well, anti-social, strangely enough and they need just a bit of nudging!
@ojjenkins71105 жыл бұрын
I go to the 6m beacons, if I hear any then the band is open to where they are. The east coast is always better for openings than out here in CO.
@asahoura27984 жыл бұрын
Almost made it to the two minute mark before hitting stop. Video sounds like a cross between an infomercial and a televangelist in need of another jet plane.
@andyhowlett22315 жыл бұрын
He's right. Too many hams sit listening or watching the dreaded 'DX Cluster' and complaining that no-one is on. Y' know why? Because they're all listening or watching instead of making CQ calls.
@davidmiller45944 жыл бұрын
Just mentioning about the patent remark. Once something is made public, as in your KZbin video, it becomes public domain and is no longer available to be patent by anyone. So, no worries of someone patenting your idea. You just shared it with the world. And we can all enjoy it. 😀
@Godhumbledme Жыл бұрын
Nice video thanks
@marcreynolds79483 жыл бұрын
Of course the scope on other people's radios is highly useful in helping them spot the x-mit CQ and then letting them center-in on the frequency to offer a reply.
@hamradiotube5 жыл бұрын
Man I only made like 2 phone contacts but had a bunch of ft8. You killed it!! Maybe cuz I don’t have the 9700 next to my 7300.