The Halo Effect. NEW Schiit Midgard!!

Рет қаралды 7,692

Күн бұрын

Пікірлер: 46

@Skeeb23 Жыл бұрын

A couple of things I wanted to notate on this video. 1. Industry standard of 4V out for balanced DAC's. Thank you to @davidsmith9407 for pointing that out. Also, I appreciate the explanation given in the comments of how the conversion works within the AMP from Balanced to SE output. We are forever learning after all!

@xM1SFiiT 9 ай бұрын

Thanks for the Review! Can’t decide on the Midgard/Modius combo or just buying the all in one Jot 2. Going in circles.

@Skeeb23 9 ай бұрын

I owned the Jot2, great amp. One thing to consider on that. The Jot2 does sound a bit different as well depending on the SE or XLR outputs. So you get a different flavor. The DAC built in option is a nice way to go. It'll cost you more of course, but it's nice too. The Midgard I have found over time typically does better with dynamic driver headphones vs planers. That's just in general.

@timbeneton8068 5 ай бұрын

@@Skeeb23do you recomend midgard for planar or not? ps. what about magni unity?

@darkwolfx333 Жыл бұрын

Using high gain on the Arya organic as well. I thought it just sounded better in all aspects

@monykaram84 Ай бұрын

can i connect Sennheiser HD 490 with the Midgard? or it will overdrive it and ruin it?

@Skeeb23 Ай бұрын

@@monykaram84 you can connect the 490 without issue using the 6.3 adapter for the SE output of the Midgard.

@davidsmith9407 Жыл бұрын

FYI, 4V from a balanced output is the industry standard.

@timtroxell4857 Жыл бұрын

How do you think this Halo tech would be with a 6XX?

@Skeeb23 Жыл бұрын

Considering how well it handled the ZMF Auteur, I would imagine it would do just fine.

@jacobsparks4419 Жыл бұрын

I got my midgard a couple weeks ago and I own the 6XX and the Midgard really did help make my 6XX’s sound fantastic, I’ve noticed the halo does seem to work better with higher impedance headphones, but everything I have sounds excellent on it!

@poturbg8698 11 ай бұрын

With this amp the bass on Focal Clear OG was looser and boomy using balanced. Go figure… I preferred it with SE.

@donniedarko5529 8 ай бұрын

Do you think the mojo2 into this into zmf atrium(open)/caldera or diana mr, would work well?

@Skeeb23 8 ай бұрын

Mojo2 makes an excellent dac. Not sure how the sound would be, but it would power the Atrium for sure and Caldera. I haven't thought the Midgard to pair as well with planars as it does with Dynamic driver hps, fwiw

@IstyManame Жыл бұрын

How do i use the halo thing if there's no xlr on my headphones

@Skeeb23 Жыл бұрын

You can't. Do your headphones have detachable cables that you can get XLR cable for?

@scottlowell493 11 ай бұрын

I have a LYR+. and BF2/64. This headphone amp might have an advantage, given the HALO control.

@JonMoralesLA 8 ай бұрын

How are you liking the Lyr+?

@ScottoGrotto 11 ай бұрын

Thanks for going into impressions with so many different headphones! I have OG ZMF Auteurs. Compared to newer atrium zmf, they are a bit more free sounding/ fun. Zach with atrium tech seems to have a well damped driver!? Maybe the halo is a little out of phase ( not actually but metaphorically? ) with the Atrium closed? Maybe too controlled? The classic Auteur to me is an Atrium light, but perhaps being open halo works better? The organic from my time with it at CanJam SoCal, could use more control. Might have been the setup, but the bass was bloomy? Sounds like a great amp to try! What balanced cable and balanced extension would you recommend for ZMF cans? Good budget preferably? First video on your channel, and it’s a winner! Will subscribe too :)

@Skeeb23 11 ай бұрын

If you have a ZMF did you happen to get an XLR cable with it? I'd recommend either a Periapt or Hart Audio ZMF cable. With Hart Audio you could opt for the modular cable. Then you can get an interconnect kit in case you want XLR, 3.5 or 4.4. That will set you back about 150-200 though. Just an XLR ZMF from either Periapt/Hart will be 50-100. You could also inquire with ZMF if they have any b-stock cables or just buy one from their site as well. You'll definitely want XLR if you want to try out the Halo of the Midgard. Now you also said balanced extension. Explain exactly what you mean there? I'm assuming you meant XLR vs 4.4. That's where the modular kit is really nice to have from Hart. 2cents! Thank you for the sub too!

@ScottoGrotto 11 ай бұрын

@@Skeeb23⁠ Hi, thanks for your very generous reply! You sparked my memory, yes I think I do have a stock zmf balanced cable! My listening spot is about 10 feet from my amp/dac, so that is why I was wondering about a 4pin extension cable :) I checked out your recommendations which are quite affordable, thank you! I’ve found that adapters and extensions can affect sound quality. I’ve had good luck using the stock zmf 1/4 inch cable with a grado extension, actually sounds better to me with the extension! I tried a Pangea headphone extension cable, but it sounded poorer. A sennheiser adapter also not good with a custom silver cable I had made via eBay. The solid silver was a treat till one of the lines fatigued and broke. The adapter kit with hart is quite cool! Which of these cables sound the best to you with your zmf’s? Thanks again!

@ScottoGrotto 11 ай бұрын

Schiit Valhalla 2 is a great synergy amp for me with my OG zmf auteurs, and renowned for synergy with sennheiser 300 ohm phones. Unfortunately these Valhalla 2 amps are in Schiits’s “last call” zone @schiitaudio3138

@more_me_than_I_am Жыл бұрын

All your headphones had balanced cables? And then you used 4pin xlr to 6.3mm gender to connect to the SE output?

@Skeeb23 Жыл бұрын

Not quite sure the question - so I'll explain. I used both RCA and XLR inputs from my DAC during my testing. I used RCA and then the XLR out, XLR and then XLR out, XLR and then SE out and RCA and SE out. All options, hope that helps. OH - maybe I'm understanding...I didn't use any adapters on my headphone cables. I have quite a few cables and all options available to me without using adapters.

@more_me_than_I_am Жыл бұрын

@Skeeb23 Thanks! For example I have a pair of Audeze lcd xcs.. So if I wanna compare how different the se and halo outputs sound, I need a balanced cable AND an unbalanced cable for my Audeze. Am I right? Sorry for my English. Just curious if the cables could contribute to the sound difference

@Skeeb23 Жыл бұрын

That is really the way to go. There are adapters you can get to go from XLR to SE (never ever try the other way around) but I don't recommend it for a true impression. But yes if you want to compare you'll need to be able to listen to both SE vs XLR. @@more_me_than_I_am

@more_me_than_I_am Жыл бұрын

@@Skeeb23 Thanks so much!

@Skeeb23 Жыл бұрын

@@more_me_than_I_am anytime!