The Here 3 GPS From CubePilot For Drone & Rover - Overview & Setup Tutorial

[@MadRC]

Hi Everyone,I really like to get feedback and comments on the subjects I talk about so please comment below with any questions, feedback or just say hi :) I would also ask if you find my content helpful please consider supporting the channel by subscribing. I also live stream every Sunday evening between 4 and 5pm Eastern /10PM uk on my second channel. You can subscribe below and I'd love you to join me. Mads Live kzbin.info/door/87tSDNQuryh06hCKALODwQ You can also support the channel so we can keep making content via links in some of my videos. Patreon supporters of my channel get exclusive access to my Discord Server, there I post info, behind the scenes content as well as help and support on the things i discuss on the channel, for more info check out www.patreon.com/MadRC Finally I would ask if this video has been helpful please don't forget to click subscribe and hit the bell button as well, also give it a thumbs up share with friends or anyone you think will find it helpful. Thanks Everyone Ian (Mad)

[@matiasduran9159]

Thank you for your support !!! Regards from Mallorca

[@robertparenton7470]

Thank You from Frisco, TX. Just bought one!

[@halmet_drone]

Thanks for your video. I began to understand more about uavcan.

[@jonleiend1381]

Mad's Tech I can not find the setting up the base station video. Did you make one?

[@francisketcham7768]

Love the channel! I have a quad with orange cube and here3 GPS. At the end of the vid you went over the settings for no safety switch. It was hard to follow on the screen and you went pretty fast. Could you address settings and steps for no safety switch? Any help with configuring no safety would be appreciated. Perhaps a short video. And my friends and I would love to see more Orange cube, Here3 multirotor content

[@nickpsar]

Very informative video as always. Thanks for sharing the modified stand STL file. I just finished the printing and I can confirm that it fits perfectly!!

[@uavexploration948]

Great videos. Does or will the Here 3 support moving baseline RTK?

[@brasil.aircraft]

You guys amazing for share all this information. Thanks.

[@hselnayghay6912]

Can you tell me which hitech servos work with CANBUS?

[@Rishabh-kashi]

Sir, I have two queries. 1. Is Here3 GPS compatible with Here+ RTK base? 2. What will happen if the GPS on-board my drone looses satellite when connected to RTK base?. For example what will happen if HERE3 on my drone looses sat counts when connected to HERE+ RTK?

[@w8ryanb]

Thanks for these videos. They are great! Did you get a chance to make the RTK video using the Here+ and Here3? Can't find it on your playlist.

[@MadRC]

No actually COVID lockdown kicked in and shut me down twice but it’s on the board to be done this month. There is also an updated GPS ones coming as somethings have changed on that.

[@w8ryanb]

@@MadRC Many thanks for the reply. Keep the good work!

[@MinShinThant-g3w]

CUAV V6X and Here3 gps can used?

[@ia_para_Negocios]

Can you please clarify if this GPS can be used in FIxed Wing to agriculture application with RTK activated? thanks in advanced

[@robertnelson8621]

Another great, informative video, looking forward for the HERE3/RTK video you’re working on. On my 960 Hexacopter I’m building, I’m using a HERE3 & HERE2 both running CAN connected to a I2C splitter on CAN1.Will I have to separate them, putting one on CAN1 and the other on CAN2 when I set everything up for RTK even though they have different Node ID’s ??? Also is it possible to modify the Step file for the HERE3 mount somehow so it’ll lean forward instead of backwards??? When they were first released, before I turned the Step file into a STL file for the top piece, I deleted the two top locating stubs so that I could have one to use for the HERE2’s. Gonna give your STL’s a try, like the idea of a stiffer tube section, Thanks..

[@DeepakKumar-uh2bx]

Question: Thanks a lot for this informative video. I was wondering if I can use the here+ rtk gps without the pixhawk cube. Is it possible to use simply the GPS and communicate between rover and base station with a telemetry module?

[@vishwas1266]

Thank you for the setup video sir I am also having the problem of Unhealthy AHRS in interface when its HERE 3 is connected is it a problem or how can it be resolved..?

[@MadRC]

Are you outdoors when your getting this. Basically it could just be that you have poor gos signal

[@BassApprentice]

I've been trying to find out if RC servos are moving away from PWM like the ESCs have, and that drawing appeared to show hitec servos running of CANBUS?

[@MadRC]

Yes there are some by Hitec. I am trying to get some to review and talk about.

[@BassApprentice]

@@MadRC Great. Are these the only ones that you are aware of that has moved away from PWM signal?

[@MadRC]

BluesCycle yea I only know of Hitec at the moment.

[@AndrewBakerEngineer]

What is the max GPS position being reported? 10Hz?

[@russelldelaney5455]

Do you know of a printable stand for the Here 2?

[@dayakaranyalla3797]

Hi Mad's Tech, Can I know how to test the Here3 Module independently?

[@MadRC]

That’s not easy. You would need a UAVCan autopilot to connect too. Testing on its own is not really possible. Not impossible but you need a com node.

[@fdtank81]

Great video Would like to see it work with RTK

[@brasil.aircraft]

Perfect and VERY helpfull

[@luigifiore1265]

Hello, I just order an Here3 I have a pixhawk 4 controller I want to use two GPS at the same time, could I use the pixhawk 4 GPS and the Here3 at the same time?

[@dominicthuemmel9901]

did you get it working?

[@mallikarjunse]

No Baro? I forgot to test this.

[@barunbasnet]

Is is a good idea to disable the safety switch?

[@MadRC]

It’s not the greatest of devices to be honest. Is not use it for anything critical.

[@3dmixer552]

Hi. Can this be used with arduino?

[@MadRC]

Likely no as it’s UAVcan based.

[@agrxdrowflow958]

Where you at? That looks like Wales on the map. My family originates from Warwickshire.

[@MadRC]

South West down passed Swansea

[@agrxdrowflow958]

@@MadRC My grandmother was Welsh. Gwyneth Earhart.

[@Tlavite]

does it come with the little stand?

[@MadRC]

No but you can 3d print it for free.

[@Tlavite]

@@MadRC do you know of any compatible off the shelf ones I can purchase?

[@gmivisualsjason3729]

Don't think that will fit on my toothpick... 😉

[@markgiles8527]

My fingers my Safety Switch.

[@outsidetheboxventures7987]

You should not have placed the image of your autopilot top right of your video.

[@MadRC]

Sorry o don’t understand?

[@tunahandasoluk9123]

REİİİİİSSSS