Hi, Tks for your info, I can use 03 and Caddx vista with integra googles without re-bind in each use? Tks

He will fix them www.youtube.com/@DanielRakowiecki/videos

Man... I think ya jinx me Mads... Lol, i just bought a set of new hdo3 or doms hd, what ever these are called, earlier this month, probably have a little past 10 hours if use on them, i watched this vid yesterday morning and then went to a memorial park in town to fly for memorial day, on my 8th pack of the day, suddenly i lost signal and crashed into a near by tree... Luckily I was able to turtle mode out of the tree, but now my goggles have lost all range and the bars start dropping at about 30 feet away and totally loose signal by 100feet, I had two drones with me and both were doing the same thing, I even checked with a couple other drones when I got home, i opened them and everything looks fine... Talk about timing, lol, must be an issue with the last batch of these... I emailed Rotor Riot last night told them the story, they already sent me a return Label, no questions asked, i mentioned i was concerned about the latest batch and I'd rather upgrade to the X and they said that's fine and will issue me the store credit...

GUYS I HAVE THE APP FOR THE AVATA 2 TO UNLOCK, I HAVE JUST UNLOCKED MY AVATA 2 GOOGLES 3 WITH ALL CHANNELS OPEN, IT WAS LOCKED TO AUTO BEFORE I DID THIS AND NOW IT'S OPEN IT SAYS .....N ....AT THE BOTTOM WHERE S MODE IT ALL OPEN UNLOCKED NO JOKE, IM PUTTING A VIDEO UP ON MY CHANNEL @Droneon2012 TRUST ME THIS WORKS, IM NEW TO FPV ONLY HAD AVATA FOR 24 DAYS TRIED HAM FILE , Didn't OPEN THE FREQUENCY CHANNEL, THIS DOES, MY CHANNEL IS ONLY SMALL SO COULD DO WITH YOUR SUPPORT GUYS, PLEASE POP OVER.

I will go ahead and buy the Avata now that I know thanks to you that I can use my old remote from other FPV drone, I wish I could also use the DJI Smart Controller with the Avata but for what I understand it is not possible. Thank you for such a highly informative video, OMW to best buy now to get the drone :)

Before recording the video, did you contact Caddx support? my experience with Caddx: I also had a Fatshark like that, which I mistakenly connected to a power bank and the board burned out. I contacted Caddx support, they sent me new glasses (their black model), I just had to send them my motherboard. In other words, even though it was my mistake, they covered it under warranty. I think you should first talk to Caddx support and bring their response in the video…

try to replace DIALOG power management integrated circuit (PMIC) on board

At least it doesn't have the antenna cable crushed with the heatsink like the cadxx goggles

Funny thing is i nearly bought these. Glad I didn’t

Shame they don’t include a wiring pin out

I have both walksnail and hdzero, I broke a board for hdzero and they sent me a new one after some trouble shooting. Hdzero so far has had excellent customer support from my point of view.

I have ordered the board yesterday

Elrs 3.4 have option 900 and 2.4 GHz 😅

I grabbed one a few weeks back, I'm still trying to find some info on the RSSI DBM since it reads as XX : 2, where xx is some number.

The P1S doesn't do flow calibration?

It’s sad bc watching pals fly used to be the most fun part of fpv. I came across pictures of me and all my pals with goggles on watching taking turns flying and cheering each other on. We’ve completely lost that aspect of community in the hobby thanks dji

Long story short: Mads got droned by WalkSnail! Again!!! 😂🤣

Can you make a video to replace the battery?

They made lots of changes to iPad to make it more laptopesk

Dumb question why is the connector on the charger and not the battery for the balance charger? If the do it the other way no cable to struggle with

Didn’t bot buy a piece of land? If the lands not great it’s due to the amount not him. Land = money

Fatshark recently offered to replace the burned LCD screens in my HD3's with some good ones from another set. So I was able to get a reply from their service department and an offer. You really should try to contact them. Only hitch would be sending them back and forth to Australia... So someone is there. Meanwhile my GogglesX were sent back to China, repaired for free, and sent back to me (although I am not home to try them yet) CaddX was very helpful and responsive about service for those goggles. But you have to ship to China and the whole process took a couple of months. Meanwhile (LOL) I have purchased a set of Dominator HD and love them. Very nice goggles and fit me much better than the GogglesX, also run cooler. Thank you for alerting us to the fact that these goggles are being sold, TODAY, that cannot be fixed! This is not looking good for the entire FPV community. We deserve better.

Also the google x pcb is replaceable? So you keep your goggles to upgrade

So does DJI sell parts for their goggles 2 etc?

I spice parts from broken parts

I see more blheli32 esc's are switching to the QF32MT with the built-in fet drivers. It allows far more flexibility for AIO boards as they now have more board real-estate.

I love this content, Ian! Great video, and sorry you couldn't fix it for now, but I'm sure you'll figure out something at some point.

The app you are promoting is not working on Android 14, please specify it. I bought and had to ask for a refound because of this aspect.

For Science!

Better make the video then re-edit and spool it off when everything is clear

You overseeing the 2 in the back, yes in the ducts

You need a power screwdriver 🪛

Well that explains why my right eye gets foggy all the time. 😢

Excellent insights. Great seeing you go through the troubleshooting process, even though I don't own these goggles. Great seeing the deep dive into this tech.

Poor show Caddex....Mine work flawlessly but no spares already is pretty crap given the cost of Goggles....🤔😳🙄🇬🇧

I didn’t watch the whole of both videos but did you check the pigtails on the fatsharks for a short? Also think I’ve told you before that I simply do not watch reviews unless I am genuinely interested in the product, and only then I’ll watch the “I bought it with my own money” first over a “product was provided by” review, your viewpoint is spot on, there’s way too many reviewers now not being completely honest with their reviews whether it be about the product itself or the arrangements around the review itself. I simply wouldn’t by Caddx equipment, people have short memories and some of us remember what their pre-DJI built products were like.

Great stream.

Testing DJI Goggles 3: Unveiling Signal Strength & Safety Concerns | 20x Stronger than Mobile Phone? kzbin.info/www/bejne/g2TSiJqae61lsK8

I noticed that somebody in the group said there was a problem with the touch screen. Chances are it was 'cause when the touch screen was put in, it wasn't lined up right, and that led to crappy Type-C contact. Mine work great

Hey Mads, are you still planning on making a new pilots guide for setting up expressLRS 3.4?? Inquiring minds want to know, well really could use the help thanks man keep up the awesome content.

My avatar manual says not to power them up without antennas attached. Otherwise, you can burn out the output transistors.

Ever notice that few (if any) CADDX Avatar products have certified EMC compliance data, let alone compliance markings (CE, UKCA, RCM, etc) or even China SRRC for 2.4/5.7 GHz, nott even a product label or part sku on the case! So good luck with spares for any period of time let alone usual 10 years required in most countries 😂