The hull after 7 years. Installing keel guard.

  Рет қаралды 2,376

i_fish

i_fish

2 жыл бұрын

ifishcatfish@gmail.com

Пікірлер: 22
@DaleWyman
@DaleWyman 5 ай бұрын
Mine has lasted about 4 years. I also launch by myself a lot and using a bungee type launch rope, guide my boat onto concrete. The Keel Shield did its job, but now it’s time to replace it. Sounds as if removing it will be much more difficult than the installation.
@ifishcatfish
@ifishcatfish 5 ай бұрын
sux... i am SO GENTLE with mine precisely for that reason. Not because i am afraid for the boat, but because i don't want to replace it..
@DaleWyman
@DaleWyman 5 ай бұрын
Understand @@ifishcatfish
@davidrauschenbach6871
@davidrauschenbach6871 2 жыл бұрын
Your wife and you did a nice looking job. Seems nice and straight and well attached! Now time to relax and let it dry! Have to give us a review on it after a couple seasons. Definitely better than tearing up your keel!
@jp040759
@jp040759 2 жыл бұрын
Came out real nice. The experiment begins. How long will the glue last? That is the question.
@ifishcatfish
@ifishcatfish 2 жыл бұрын
yup. Otherwise this rubber is real thick. This rubber is not gona wear out. If I get 3 years out of it, i'd be happy and buy another one. I did a second layer around the whole thing of my own marine glue
@patrickprice2017
@patrickprice2017 Жыл бұрын
Keep guard is not recommended for hulls like the one in the video. Air bubbles water and dirt will work the guard off over just a short amount of time. Only recommend for smooth hulls without seams and rivets.
@ifishcatfish
@ifishcatfish Жыл бұрын
This comments just shows how smart i can be sometimes. I filled the holes on the front and on the back with a soft marine glue called Marine Goop. It looks absolutely perfect even today, even though i beach the boat every time i fish Nickajack dam. There is no other way to boat there but beach hard in the concrete/rock bank there. This thing probably saved my boat or i would have had to stop fishing there
@Cleo8575
@Cleo8575 2 жыл бұрын
If you do use silicone for edge, I would suggest the aquarium silicone product for sealing joints. I would personally use a butyl product such as automotive windshield adhesive. Thanks for the video good idea for boat.
@ifishcatfish
@ifishcatfish 2 жыл бұрын
i have this marine glue called Marine Goop that i use for everything on my boat. I but 12 packs of it and use it for a few years. The sides worked our perfect, but the front and back are still a little edgy and im thinking how to smooth them out
@rascalnicough7376
@rascalnicough7376 2 жыл бұрын
lmao i love when your kids make cameo appearances
@dexterrobinson4065
@dexterrobinson4065 2 жыл бұрын
Victor, would you say the new Shimano Miravel is the Complex XR released to the western market under a new name?
@ifishcatfish
@ifishcatfish 2 жыл бұрын
I doubt it. I expect the price to be under Vanford. So I am already thinking about what did they remove from the vanford.. There are two versions above the vanford, but no versions of vanford under vanford..
@tomstarcevich1147
@tomstarcevich1147 2 жыл бұрын
Looks good should work i can't put it on my boat the rollers sit on my keel hopefully it lasts a long time 🐟👍
@Evenaardez
@Evenaardez 2 жыл бұрын
Does Diawa usually show anything at Icast? I cannot seem to find anything new. As for shimano, are we only looking at the Miravel for potential ultralight? Seems like a worse (although better looking) Ultegra? A little disappointed.
@ifishcatfish
@ifishcatfish 2 жыл бұрын
Its not ultegra, its carbon, so most likely some vanford
@MAX99999
@MAX99999 2 жыл бұрын
Is it plastic? You should have heated it up to form it. I would have beveled the end at a 45 degree angle with a razor blade so it’s not a hard edge.
@ifishcatfish
@ifishcatfish 2 жыл бұрын
its rubber or some kind of silicone. But it is thick.. No heat, heat will probably damage or melt something.. It says u can use it right away, but my own glue that i put on the edges needs 24 hours, so probably no boat fishing tomorrow, unless i go in the afternoon...
@MAX99999
@MAX99999 2 жыл бұрын
@@ifishcatfish good video. Good to know stuff when I buy a boat in a few years. Use a piece of scrap and apply heat, see if it discolors, from the back of course. I would say the areas where you used a lot of glue needs more drying time, and considering the inside is not exposed to air.
@Evenaardez
@Evenaardez 2 жыл бұрын
Nice job! Also, have you ever had Nikko baits react with other baits in a foam case?
@ifishcatfish
@ifishcatfish 2 жыл бұрын
Yes. Dont put too many. They should not touch
@Evenaardez
@Evenaardez 2 жыл бұрын
@@ifishcatfish Gotcha, what baits did they react with for you?
Gator Guard KeelShield INSTALL (Step-by-Step Instructions)
12:29
Jason Christie Fishing
Рет қаралды 20 М.
Gator Guards KeelShield Keel Guard Install (PROTECT YOUR BOAT!!)
18:31
ПРОВЕРИЛ АРБУЗЫ #shorts
00:34
Паша Осадчий
Рет қаралды 7 МЛН
КАК ДУМАЕТЕ КТО ВЫЙГРАЕТ😂
00:29
МЯТНАЯ ФАНТА
Рет қаралды 10 МЛН
Double Stacked Pizza @Lionfield @ChefRush
00:33
albert_cancook
Рет қаралды 111 МЛН
Installing a Megaware Keelguard the easy way!!
6:54
Futurecast Academy
Рет қаралды 1 М.
Do Wood Treatments Really Work? UNEXPECTED RESULTS
14:17
Rag 'n' Bone Brown
Рет қаралды 790 М.
How To Install A KeelShield Keel Guard
6:49
T-H Marine Supplies
Рет қаралды 10 М.
When A Gang Leader Confronted Muhammad Ali
11:43
Boxing After Dark
Рет қаралды 4,9 МЛН
Inside the B-17 Ball Turret
18:59
Blue Paw Print
Рет қаралды 2,4 МЛН
Fiberglass Gelcoat Repair (So you hit something with your boat)
15:24
The After Work Garage
Рет қаралды 476 М.
Megaware KeelGuard Official Installation Video
6:16
Megaware KeelGuard Inc.
Рет қаралды 183 М.
How to Repair a Bent Skeg
7:17
RodFather Bass Fishing
Рет қаралды 62 М.
Wet sanding boat scratches and keel guard replacement
12:27
On The Hook | Crappie Monster
Рет қаралды 1,4 М.
貓咪 小鬼當家🎮🔫🚑 #aicat #shorts #cute
0:41
Cat Cat Cat
Рет қаралды 30 МЛН
Аниматоры в форме СПЕЦНАЗА: Именинника разыграли
0:21
Собиратель новостей
Рет қаралды 12 МЛН
Choices for your loved ones❤️
0:15
ISSEI / いっせい
Рет қаралды 19 МЛН