THE HYBRID

The video you are about to see was created at the request of a customer. As many of you may know, a “Hybrid” engine refers to a Renesis side port exhaust engine that also incorporates peripheral exhaust rotor housings.
What you are about to watch is a complete engine assembly video with detailed explanations about the benefits and reasons for this engine design.

[@darwonboyful]

Awesome listening to someone that's so obviously a total professional at what they do. Great video

[@ThotBonker]

Master class on simplified education and communication. These videos have done you millions of dollars in advertising. Be proud!

[@Desertduleler_88]

Great video, always a pleasure to see a master craftsman at work.

[@itsdillywilly9075]

Always great service from Adam and his team!

[@andersjjensen]

I'm a sort of masochist I guess. I keep watching channels that do rotary engines and FD RX-7s in particular... despite full well knowing I'll never be able to afford such a luxury.

[@JD-oh1kb]

LMFAO 100% truth

[@sepg5084]

Rotaries are just a novelty anyway

[@jo-qp7mz]

Lol I seen you before on a different rotary channel! Was it rad potential? Dahms ??

[@skaterboi8922]

Hey bro I used to watch so many rx7 drift clips and sound clips and now here I am cuz I own one manifest that mf barn find

[@unknow5518]

I wait for videos in this channel thats the pinnacle and i grew up with watchin this channel

[@jbone1014]

I’ve been waiting to see you guys build a hybrid… great work👏 I want to build a hybrid for my 8 and thankfully you guys build them… only thing holding me back is where to get a custom header to accept the 2 additional exhaust ports. Please if you all have any recommendations, drop me a line. On a different note, great video & great information as always… I am a huge fan & looking forward to having RX7 Specialties build my hybrid.

[@brianvandorp1445]

Adam and the team was phenomenal with keeping in touch and keeping updates as they went through the build. I have one of Kyle Mohans flanges that I will be working with in the future with a custom fabricator but the header will be something I battle after I get the engine back. Overall I couldn't be happier with the build, and just take your time researching before you pull the trigger.

[@jbone1014]

Thank you for that info, I’ve been doing a ton of research on this subject matter but it seems like everything stalls when I try to look into the exhaust manifold. I have always owned a rotary going way back to the FB’s… I love my 8 but Mazda had a brain fart designing the Renesis. I have seen Kyle’s videos as well as there is a lot of data out there based on the build. I hope that you enjoy your hybrid, I will definitely be taking that plunge very, very soon. Thanks again for your reply 👊

[@camjones1106]

@jbone1014 Kyle Mohan racing has exhaust flanges etc

[@nobodyspecial5026]

seeing as how the Mazdatrix/KMR turbo hybrid had absolutely nothing below 4500 rpm, it’d be interesting to know what turbo you plan to use on it?

[@Superb_Owl80]

I’ve been interested in this for years. I’ve always wanted an RX8, but never pulled the trigger.

[@ClwnJuNkY]

One of the best cars ive ever owned . Wish I never sold it .

[@Superb_Owl80]

@@ClwnJuNkY I’ve got a 340i m sport and an rsx type s. I really want to add a rotary to the group

[@ClwnJuNkY]

@@Superb_Owl80 I have a sa22 Gslse 6port 12a best car ever

[@Superb_Owl80]

@@ClwnJuNkY I had two buddies in high school with fb’s, one was a carbed 12a and the other was a gsl-se 13b. They were both very fun. I’ll find something one of these days.

[@ClwnJuNkY]

Plenty of them around . I want the euro version of the rx8 that runs on Hydrogen

[@ultimatejay]

Why don’t you leave the apex seals in the rotors on assembly and then just pull the corner seals out with a magnet and then slide the springs in, and or pull apex seal out and put the springs in like the way you do it? This eliminates any corner seal miss alignment. I know you slide an old apex seal in to align the corner seals but there is a chance they can move when you put the rotor down, especially if you move it. Then you will have to remove the rotor and start over.

[@jacob6325]

How much do y’all charge for a Rx8 hybrid turbo engine build like this?

[@erwinhauquier2414]

No critical comment , but did you forget to use silicone on the bottom legs of the middle plate at 16 minutes, or did you put it on the rear housing?

[@brianvandorp1445]

Great observation though I'm sure he put it on the housing not on the middle plate itself.

[@mflbikes1870]

That's definitely critical, I think your right no sealer

[@BigEzyyy]

You can just see it on the housing as he picks it up. You put the sealant on which ever has the o rings as they will indicate how far to apply the sealant. 27:20 you can see it all

[@erwinhauquier2414]

​@@BigEzyyyi see it on the 27:20mark . But i cant see it on the housing when he picks it up.

[@user-go4go8vn3v]

Hi very good,we’re can I purchase the studs. have been washing your videos for a long time thanks.

[@elgato9663]

Next video- How to build a hybrid exhaust manifold. Lol

[@nobodyspecial5026]

it doesn’t really matter given all the potential efficiency losses created by 5 exhaust ports from 2 rotors with mismatched opening and closing times. There’s absolutely no way to build proper NA manifold that can effectively pulse scavenge tune this configuration. If you really understand how an engine maximizes torque, from which power is derived relative to rpm, then you also understand why there’s never yet been a single NA hybrid Renesis to date that ever came close to the output of the best built stock port Renesis engines. if you want to see a real blueprinted and properly built stock port Renesis engine runs (as supplied by Daryl Drummond) then search youtube for a video titled “Dan Wheldon Star Mazda Test at Indy”. .

[@jimbowcracklehead8071]

Please see this through, everyone always gives up and never shows the potential of this build

[@brianvandorp1445]

It'll take me a bit of time to get everything I need but I will certainly keep all of you up to date as the project develops. I am just a lone individual as opposed to a shop, but I am dedicated to keeping this going and still getting pieces I need together. I'll keep you up to date as much as I can on here or on other forums. Thanks again Adam for your professionalism and dedication. Wealth of knowledge is astounding.

[@abhirmalhotra5103]

Mazdatrix has done it. Google mazdatrix hybrid.

[@davidhusband5022]

you are wrong about the factory front thread sizes. there are cars here in australia making a lot of hp running fast Ets using them. you are going to crack plates regardless of studs, its all to do with the tune, and if you are still cracking plates, you need to get billet plates once you are in that hp zone.

[@minibikemadman]

honda bond ftw!

[@beratarc9087]

How much pressure can you put when the turbo is connected?

[@Phil2stroke]

why not use rx7 solid corner seals?

[@kzarnold3678]

Interesting 🤔

[@jimsgarage263]

I have a GSL-SE with 250,000 miles on it. Video on my channel.

[@bachhoang736]

omg, finally

[@davidhusband5022]

at 27 mins, you crank the engine the wrong way,with no plugs in it,and say its already making compression?

[@DarkVoidRanker]

He' back yeeeaaaaaaaahh

[@dannysierra2622]

What states are are located

[@ryanborax7851]

If you meant what states are they located in, they’re only in Alberta, Canada

[@dannysierra2622]

How much is cost to buy a hybrid

[@kylejohn486]

Turblown

[@khaiwaifong4639]

brother, send link regarding your ratchet tools, it is amazing the tools can bend like that and the tools does not spoil lol

[@ryanborax7851]

It’s called a flex head ratchet

[@stuntdrvr]

could have sworn it was "maa-z-duh"

[@Grayson203]

These guys lapped my irons for my rx8 engine and they ended up totally chewing through my oil control and scraper rings. Lapped right through the nitriding too, so I went from zero step wear to out of tolerance in only 4k miles. Super disappointed

[@christianmaldonado3367]

is that so ? I was looking to send them my plates to lap.