The KING of Benchrest Rifles | Real UNCUT Groups | FX Impact M3

That's right, in this video we fire groups with with no fancy video work, just real, uncut groups from the FX Impact M3. Not singular groups, but group after group with no resets and no cuts. Scope cam paired with a regular camera to show the whole process. Want to see what an FX Impact M3 can actually do in real world conditions? This video is for you!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
DISCLAIMER: This is a HUNTING CHANNEL and or VIDEO!
This video is meant for educational & documentary purposes only. This video has been produced and uploaded with the intention of providing educational content that encourages safe and ethical practices. None of the products used in this video were designed for use on human beings - Only targets and animals. Neither “68 Whiskey” it’s host or anyone connected to the show, KZbin, Google, or their affiliates can be held liable for any injury or damage resulting from attempting to duplicate anything shown in this video. The "68 Whiskey" Channel is not a store. We do not sell firearms, firearm parts, airguns, airgun parts, or airgun equipment. All effort has been made to adhere to and respect all of KZbin’s policies and Community Guidelines.
- By viewing this video, you are acknowledging the contents of this disclaimer.

[@PaulHamM3]

I watched this earlier on Airgun 101, i do love these type of videos showing real world groupings, recently i have become a bit dispondent with all the social media cherry picked groups with everyone blowing there trumpets on there "precision" groups. You guys shoot the type of groups i shoot, day in day out, not just on windless days but on the bad ones to, keep the videos coming .

[@68Whiskey]

Thanks Paul. Every year or so i like to drop a video that is simple and candid. And impossible to argue with bc of no cuts and scopecam. Scopecam or it didnt happen!

[@truongle2982]

@@68Whiskey anh gửi sang Việt Nam cho tôi cây này được không ?? ,chúng tôi có hàng nhập khẩu,, nhưng các lái Việt Nam thường luộc mất đồ ,,

[@7506999]

Thanks for the insight Keith. Nice set up, great shooting !!

[@68Whiskey]

Thanks man!

[@compressed_precision]

Nice work Keith! They are stacking nice!!🎯 I'm running a very similar tune in my M3 .30. Currently have my son watching your strelok video. Appreciate the lessons!!👊👏

[@68Whiskey]

Awesome thanks man. My pleasure on the lessons!

[@marcosgonzalez84]

You guys are the reason my first airgun was an impact m3 …. such a fun accurate gun

[@68Whiskey]

Awesome to hear that you enjoyed your choice. Nuthin like it!

[@truongle2982]

​@@68Whiskey Cho Tao Cây này,,,

[@FxFanBoy]

Glad to see you guys getting some decent optics finally😂! I love that Valdada scope. It’s served me well 😎

[@68Whiskey]

The valdada is quite nice. Love my element nexus just wanted more magnification

[@derrickmitchell39dm]

You dropping them right in there my boy. Damn! Wow.

[@68Whiskey]

Thanks brother!

[@JIBREAL1967]

Amazing!! Great shooting as always.

[@68Whiskey]

Thank you!

[@fieldgunbio2402]

Quality set up and impressive as ever 👊

[@68Whiskey]

Thanks brother!

[@carlmaple9315]

Thank you for this video!!

[@promitheasapollonious4230]

Thank you for sharing. Been watching you for few years now and enjoyed evey shot as I was shoting the gun.

[@68Whiskey]

Thank you for the love man !!!

[@chrisfigueroa3361]

Awesome shooting buddy wow man I watched this a couple of times great job thanks for the info 👍you are one hell of a shooter freaking badass fx m3 dirty 30 baby yup perfect

[@chrisfigueroa3361]

Awesome shooting Keith I have my fx mk2 25 cal 700mm with 720 power block plenum upgrade shooting 34 gr jsb mk2 at 865 fps and it's on the money I get like 4 and half mags it's crazy at 95 bar on the reg Awesome video I always enjoy watching the video thanks for sharing bsafe buddy 👍

[@normanshanley7417]

thanks buddy

[@chrisfigueroa3361]

@Norman Shanley yeah man love watching your guy's videos keep up the awesome work 👍 my money is on you guys to win 🏆 👍

[@68Whiskey]

Thanks brother. Hey next time you mess with one of these put it back together right 😂🤣. Just bustin on ya

[@chrisfigueroa3361]

@68. Whiskey. lmao 10-4 brotha I got my fx m3 22 cal 700mm sniper edition shooting 34 gr javelin 218 at 1000fps av out to 200 yards 2 1/4" groups 1 inch at a 100 yds lol with no power block only carbon fiber sleeve and regular slug kit with a 700cc bottle 300 bar so I get a lot of shots, ended up putting the power block on my fx mk2 25 cal 700mm shooting 34 jsb for now at 865 to 870 one hole at 50 1 inch or better at 100 yards and I put the 800mm barrel tension kit away for another day I'm trying to get a shroud for it so it won't be so loud 😉 but I got ya brother

[@davep6286]

Sort Weigh Wash, and your ready for the bench👍 aim small keeps you tight. You have a great setup and even better lifestyle. Thanks for sharing

[@68Whiskey]

Thanks Dave, love this place

[@davep6286]

@@68Whiskey the parts we see, does like amazing alvb Dave

[@sosteve9113]

Those FX guns are lookingng pretty accurate,so much calibers to choose from

[@justinmakesrepairs4535]

Thanks for all this great information, I enjoy the videos that you create and the details given to help me tune my airgun to the best I can.

[@justinmakesrepairs4535]

Also just curious did you epoxy the carbon fiber stiffener and if so just to the liner or the barrel or both. Thanks 😎

[@68Whiskey]

Hey buddy happy to help. I epoxy the cf sleeve to the liner. Not the barrel. That way i can still swap it out if i want to

[@justinmakesrepairs4535]

Right on, thanks for the tip!

[@kirbysands3197]

Hey Kieth. I subscribed to your channel about a year ago. Really like your videos, shooting, and all content. I've been shooting powder burners since a little boy. I have a couple of pump airguns and a couple of break barrels that I am very good with. After your videos, Ernst and Airbuks videos, I am really interested in getting an M3. My question to you is, is it a big transition to the PCP? To watch all the videos and all the information out there, they don't look that complicated to learn. Thanks in advance for your opinion.

[@NotAsTraceable]

Your neighbors are probably wondering who keeps ringing a bell...lol. Out of the box my .30cal M3 would put pellets in the same hole at 50yds. Slug accuracy, now that took a bit of work and money, but I got there. I did the different barrels, carbon sleeve, etc but slug weight, design, diameter is as crucial as anything in getting that accuracy. It's amazing that slugs with the same weight and diameter but different "bottom" style, flat, cone, dome, etc can make such a difference.

[@68Whiskey]

Yes. This exactly! Slugs are worth the pain. But they are a total pain.

[@terrywells3955]

Keith I could see all of them pellets arching as they came in that was awesome

[@68Whiskey]

I could watch them arc in all day long 😁

[@terrywells3955]

@@68Whiskey Yes hell

[@Michael-yz1sr]

Great groups and sweet rig

[@adambroadmore8865]

Awesome shooting Keith!

[@68Whiskey]

Thanks Adam!

[@UpNorthAirGunner]

Keeping it real brother! Looking forward to shooting with you in April!

[@68Whiskey]

I cant wait brother!

[@forgodandcountryoutdoors]

I love watching those 30's rain in!

[@68Whiskey]

Yeah buddy!

[@AVR_BRANDAL]

Good job 👍

[@jamescooper8556]

I got a message that you took my challenge thank you so much. So will do 100 yards with slugs best three out of five shot groups wins. I can't wait to meet you either you and Norm seem like to really awesome guys. I'm sure I'll learn a lot from you guys. Thank you for taking the challenge.

[@68Whiskey]

I said id meet you at rmac. Nac. Or air cup. And we compete there. I dont have time for personal beefs like your friend wanted. Too many of him on the internet. But ill happily compete against you in public, alongside the best in the world. Look forward to meeting you. Please introduce yourself. See you there!

[@keithrush4168]

Good morning! Thank you for all your help thus far. Wanted to ask which pellet you prefer to shoot in .25 in the Superior Pellet Liner? I have only shot the FX 34 grain, but I do have the JSb Exact King Heavy and King Heavy MK2 that I haven't go to try yet. I know it really comes down to what the barrel likes, but just wandering if you find one grouping better than the other? Does one do better at a different speed than the other? Oddly, the second time out with the Panthera, the FX 34's weren't grouping as well as they did the first time. Only thing I did different was clean the liner to get the grease out. Maybe it will take several more shots to get it leaded back up. I don't know. Just looking for a recommendation or suggestion. Appreciate the help. Are you planning to go to the Pyramid Cup? If so, I look forward to meeting you. Not often I get to meet someone with the same name. LOL..

[@Nathanpettit22]

Great shooting brother!

[@68Whiskey]

Thanks brother!

[@user-zs6re1ox8n]

Hi Keith great video and shooting love watching you both am in the uk and i have a fx impact m3 25cal FAC sniper on order i've watched your videos on shooting 25cal and what you are shooting them at but can't find any setting for the 25 i have seen them for 30cal am going to shoot slugs would you help and give me a starting point setting to get me some were to were i need to be Thank you Dave

[@AirTanksPlus]

Very good shooting, thanks for taking us along. I wish I had room to shoot out to a 100 yards, If I had a place to practice at the house I would consider throwing my hat in the ring.

[@68Whiskey]

Thanks man, having a home range is a huge advantage. This range is 80 yards from my front door. Very lucky to have this space.

[@17chucksters]

Great video! FX needs to put the quick tune system on all of their airguns. It makes switching to different pellets or slugs repeatable.

[@68Whiskey]

Thanks man! Yes it does. Really easy to use and repeatable

[@BBBB-re6ug]

Hi, is that the medium or long backbone rail? Thank you very much for sharing btw

[@simon6ppc246]

Nice one Keith, looks like you also spend hours and hours tunning and trying to get the best out of your rifle or rifles as i to have spent most of my life doing the same lol with powder burners too 👍👍

[@68Whiskey]

Thanks simon. Yes I spend a ton of time looking for the best combinations and tunes. Its what i love to do!

[@bbano]

Awesome gun and awesome shooting!

[@68Whiskey]

Thank you kind sir who i do not know personally. If you wish to elaborate on the awesomeness at any point feel free 🤣

[@bbano]

@@68Whiskey Well certainly, comparing my shooting to this video, I find that your marksmanship is what? ... Awesome. 😀

[@rudychavira5558]

I agree I'm not believing what I'm shooting at 100, 125 great video, have lesser bipod and bag

[@AirgunEvolution]

I have it on good authority you are using Special Imported Air from the Himalayan Mountains packaged at altitude, How has this affected your groups? and where can I buy it?

[@68Whiskey]

I dont know who told you that, but i wont deny it. It cant be bought, only bartered for and you need to work it out with the local elders yourself because they probably want something different from each person

[@mikefoor5162]

Keith sends them a nice bottle of whiskey or gin. Steve you could send them some iguana eyeballs or a nice belt covered in iguana skin.

[@Pauly5150]

I enjoy your videos. As it is, warts and all. How do you find the Tactacam compared to action cam in side shot?

[@68Whiskey]

Thanks man. Im no director lol. I like the tactacam because its simple to use. The app works and i can level the crosshairs easily and check clarity. I like the sideshot too and it does produce better quality film there is no doubt. But simpler works for me better even with a slight loss of visual quality

[@Lion-rj9lm]

Hello Keith, awesome shooting. I have almost the same setup, 700mm superior slug barrel and carbon fiber sleeve. I am using NSA 54.5 gr hollow point slugs at around 960, I don't get groups like yours at 100 yards. What type of ammo are you using?

[@68Whiskey]

Thanks man. I am shooting pellets here. Slugs are trickier to tune but my slug guns do shoot as well grouo wise. But it takes a lot more effort to tune it right

[@airshootist]

Very impressive, especially at only 870, that surprised me. Good shootin', bud.

[@68Whiskey]

Thanks 👍

[@warnerheathman3471]

Great video...I'm shooting the same gun with the Valdada scope. On this video, what ammo are you shooting? And what grain weight? Thanks for all the great videos!

[@normanshanley7417]

thanks buddy. we are shooting fx 44gr pellets here

[@68Whiskey]

Thanks buddy we appreciate you!

[@Mike_Njs]

One question, do you have the carbon sleeve attached to the liner? Or just put it on and tight, thank you! good videos from spain!

[@68Whiskey]

Thanks man. I epoxy mine together! Just make sure its positioned right if you do or it wont seat back into the barrel

[@franciscocarvalho2424]

good morning my friend as always spectacular videos your results are impeccable for you what would be your biggest difficulty is the natural effect climate or the configuration of the equipment

[@franciscocarvalho2424]

impact is very versatile and as their work is being recognized, I personally wish much more

[@68Whiskey]

Thanks francisco! Always appreciate your support!

[@franciscocarvalho2424]

@@68Whiskey You deserve all this support, it's with a lot of respect and affection for you it's your job I watch all the videos I put them in translation a fan who admires a lot is always wishing you much more success

[@keithrush4168]

Good evening Keith! Wanted to ask what brand portable bench was that you were shooting from, as I’m looking to buy one? Not sure what the top is made from, but it looked awesome with the FX sticker on it. Keith

[@68Whiskey]

Hey Keith, that one is direct from fx usa. You can call them to order one. The top is a laminate wood and i like the bench a lot

[@pisserny]

Not too shabby with homing pellets when you turn the wind off lol.

[@68Whiskey]

Haha yup. They know where they are goin😁

[@scinner28]

I dont have the money for your nice setup..But man i like to watch ferrari's aswell.And with a nice shooter and teller it is very nice to watch . Thumb's up.

[@normanshanley7417]

thanks so much buddy

[@68Whiskey]

Thank you that means a lot!

[@heithwatkins]

Wow! Amazing accuracy. Most of my hunting is in woods within 50yards. I use 177cal because I have 25,000 pellets of everything over 10gr. I hunt squirrel and rabbit. Keeping the above conditions in mind. Which FX would you recommend? Iam leaning towards the Impact Compact, Maverick Compact and the Dreamtact Compact. Again, I will be buying in 177cal. God bless you brother. 🎯🇺🇲

[@68Whiskey]

Thanks man! For those conditions i highly recommend the wildcat or the crown. They are much nicer to hold in the hand and walk around with than the ones you listed in my opinion

[@martinrodriguez6662]

Great video Just curious how are you liking the Tactacam over the side shot ?

[@68Whiskey]

They are different animals. Tactacam is easy. Side-shot is better quality

[@WiscAirGunners]

Nice shooting Keith!

[@normanshanley7417]

thanks brother

[@68Whiskey]

Thanks brothers!

[@JeanLucRibaud]

Très jolie le table de tir

[@secondfirstsecond]

Hi can you actually tilted the rifle when in fact the vipot points between bipod and monopod are not inline? I hope you got my point.

[@Lowballinoutdoorz]

Nice

[@stedyone1090]

Interesting how temperatures play a roll in pcps. I shot early morning in Florida fog and my moderator was covered in water 💧 from humidity and cold air from rifle. Wondering if a progressively colder barrel affects accuracy 🤔

[@68Whiskey]

Yes it absolutely Good news is with a few shots you can bring the temp down fast. It will still be changing but slower after the first few shots

[@airguns_rc]

Nice shooting Keith. I have a lot of the same modifications as you do. I shoot the same FPS also. Usually 868 FOS to 879 FPS. I am also around 100 BAR, but my .30 caliber is my MK II. you've seen it at RMAC. My Impact just shoots one ragged hole at 100 yards. My most accurate rifle. I am still fine tuning my M3 .22 caliber with the slug set-up, and my M3 .35 caliber with the slug set-up. I will be at the range all day tomorrow. Question for you. Do you have any air filling aggravations with the colder temperatures? My friend I have been experiencing that.

[@68Whiskey]

Hey man. Yes. Yes i do. The gun operates fine, but the orings in the fill whip often leak as they get cold. I have no solution to that yet

[@airguns_rc]

@@68Whiskey yeah, same here. It’s annoying. Hate to waste air.

[@jerryking3208]

Are you using the factory barrel and the pellet port not the slug port? 700 or 800mm barrel and who’s pellets and what weight please. Awesome shooting.

[@68Whiskey]

Thanks jerry. Yup factory pellet barrel. Pellet port. 700mm. Fx pellets (jsb) 44 grain

[@keithrush4168]

Good morning! Finally got to start shooting PCP’s this year. Wanting to shoot benchrest, I got my first FX, and went with the Panthera 600 in .25. Got to shoot it for the first time last weekend. Probably not the best choice for benchrest, but I love the look of it. I have it shooting FX 34 grain at 886 at the moment. Reg is at 125 on 17 power wheel. Should I turn the reg down some? I also just received my Valdada yesterday. Went with the Crusader-2 5-40x56 and also got the Anvil bipod. Just need to find an Arca or M-lock to Picatinny adapter. Any suggestions for that? Thanks, Keith

[@68Whiskey]

Hey man congrats! If your gun is happy you can leave the reg where its at. You are at the top end of the sweet spot for fps. Maybe try 870 too if you want more than you are getting. On the oic adapter I usually cheap out and get the amazon ones for mlok. All it has to do is sit there so i dont get too complicated for that

[@keithrush4168]

@@68Whiskey Thank you. I will do some testing. Just need to get a chronograph. The other question I forgot to ask is should I get a slower twist liner? The pellet liner I purchased is 1:24. Not sure where to find a slower one if so. Thanks for your advice.

[@bulufish8208]

U got to pay to play ▶️ 😏. Nice tune buddy. Stop having fun.

[@68Whiskey]

Haha. Never!😁

[@LRF1-9-7-2]

Hey Keith, Love watching your videos. I am also from New York. What tune do you recommend on a 700mm 25 cal of slugs and what slugs and weight? I’m looking to switch my 600mm 30 Cal over to a slug gun. What would you recommend? Keep the video coming.

[@68Whiskey]

I like 150 bar with the hammer near max on 41 grain zan slugs. Its a hammer!

[@normanshanley7417]

hi buddy its norm here we are running 41gr zan slugs out of our 25cal slug guns at 965fps front reg at 190 rear reg at 165 power wheel on max and hammer at around 3.75 front valve out to line four

[@LRF1-9-7-2]

Are you guy running slugs out of you 30 cal’s for hunting?

[@normanshanley7417]

@@LRF1-9-7-2 yes we do

[@LRF1-9-7-2]

@@normanshanley7417 You guys are the best. Hope to meet you guys. I’m in Westchester County. I gut got into air guns. I’ve been with Bin and Leticia for the pellet shop. I bought 3 impacts in the past month.. 2 25 cal and a 30. I always been a accuracy, freak with powder burners.. the m3 produces. I guess I got bit by the bug.. 😂

[@vainparasite]

I really liked the M3 but I preferred the redwolf and I already had a Maverick. I'm in the UK though so I'm stuck with sub12 and 100yards is about as far as I can go being relatively accurate grouping

[@68Whiskey]

Yeah man sub 12 is a whole different ballgame.

[@vainparasite]

@@68Whiskey Some people say it makes you a better shooter but I can honestly say it's done nothing for me 😂😂😂

[@hankvana2149]

Thanks Keith! Nice to see a tricked-out MK3! As a serious but non-competitive shooter, I've been extremely happy with my factory stock MK2. I sort (only when needed) as well and have a theory that fliers are caused by pellets/slugs being loaded canted (off axis) to the bore, hitting the choke cockeyed, being extruded "bent", then flying off somewhere out of the group. Slugs, being pointy, are more susceptible to being misloaded and groups open up. Seems that single loading is always best for accuracy, so it follows that magazines and pin-probes may be a cause of off-kilter loads and fliers. Just guessing. Proper positioning of the slug to the rifling might be a cause for larger groups as well, so I'll be experimenting with seating depth this year. Cheers!

[@68Whiskey]

Thanks hank. The pellet probe seats them nicely because it contacts all edges Im convinced the fliers in my guns are strictly the pellet itself And even if they weigh fine an air bubble inside is a disaster

[@rudychavira5558]

What are you using to weigh the pellets? For hunting perfect I stay with 34gr and get great results

[@68Whiskey]

I use a reloading scale. The weights vary a lot but they don’t effect regular hunting

[@gilyost7744]

awesome!! thanks keith!! what was the liner?

[@68Whiskey]

Thanks man! Just a standard pellet liner with a carbon sleeve epoxied to it

[@kevinwesh]

❤from france 😊I whave 1 fx impact m3 too

[@jasonsmith748]

Nevermind your going over it.

[@joelanthony3308]

At 110 how high above the line of sight through the scope do you think the pellet rises at the peak of its arc before coming down? I try to picture it when I’m shooting but it’s hard for me to gauge, silly question, awesome shooting 🤘🏼

[@68Whiskey]

Thanks man. You can see it actually. Right at the top of the scope. Watch that slomo part again its cool

[@cerealkilla1029]

@Joel anthony ballistic apps (such as Strelok) will tell U the amount of rise an drop in inches or cm. Also scope click value at any distance. Its bad ass.

[@joelanthony3308]

@@cerealkilla1029 thanks bro I definitely need to get that

[@bloodops3751]

Nice shoot

[@68Whiskey]

Thanks man

[@chaseyourdreams4104]

I have never been as anxious a week and a half ago I purchased my first impact m3 30cal sniper and it's saying that it'll be in the mail in 2 days. I know the guys at Utah air guns have been shooting competitions. I have been shooting a 25 caliber dreamline for the last couple years and finally able to upgrade.....

[@68Whiskey]

Awesome man. You are going to love that impact! Check our tuning vids if you have any trouble

[@josh9465]

How many liners did you go through to get those results or did you modify the liner in any way?

[@68Whiskey]

Great question, this liner has a carbon fiber sleeve epoxied to it which i believe helps with consistency. I like it better than just sliding one on. I do this to all of my liners now. To the other point I have three 30 cal pellet setups (two on loan to friends for NAC) , and I tried four liners total to set up all three. The one liner i didnt use wasnt bad, it was just an old stx and i went with the new superior liner because i think it shoots tighter. I thought one rifle wasnt as accurate as the others but then i realized i had the reg too high. When i brought it down to 110 it tightened right up. Pellets aren’t hard to tune at all. Slugs are another story….total PIA and i usually end up trying a few liners to see what the gun and slug likes best.

[@erwino024]

@@68Whiskeywhat epoxy did you used on carbon fiber sleeve?

[@preyingmathis2517]

When you sort for weight, what is the tolerances you sort to? Are we talking full grain difference or tenths?

[@68Whiskey]

Tenths

[@MikeS1944]

How do you think it compares with the Alpa Wolf?

[@68Whiskey]

I think it wins by a lot If you look at the major comps daystate rifles don’t usually end up on the podium.

[@edsonpessoa4861]

Queria uma dessa

[@Ayjay12345]

The scope is worth more then the rifle!

[@RobertMalin-gd6eg]

i would love to put your 68 whiskey stickers on my fx impact, do you sell them Keith

[@68Whiskey]

Thanks so much brother! We dont sell them but will have some goodies to hand out on the competition circuit this year. NAC and RMAC!

[@galvinklein7546]

Have you ever thought of using a different caliber other than .30 for benchrest? What are your thoughts on 25? Dustin won with .22 that is crazy!

[@68Whiskey]

Hey man. Yes i have. I almost switched to 25 cal this year but chose to delay it until a certain pellet is manufactured 😁

[@MichaelBrown-is2on]

Do you prefer the .25 when shooting slugs ?

[@galvinklein7546]

@@68Whiskey new 25 pellet???😮 what liner you running on your .30? .25 mk2 shoot very well and the shot count per tin is a big plus.

[@justinhromek73]

@@68Whiskeycertain pellet??????🤔 Timeframe? Lol

[@jasonsmith748]

What scope? Reticle is really good.

[@68Whiskey]

Thats a valdada mini g2 with mil mil

[@esromvre]

I have a m3 for comp and looking for them but not good information that I can find on when where and who to contact about them. Any help on this would be greatly appreciated

[@68Whiskey]

Looking for what buddy? Everything i have on this rifle is available at utah airguns

[@esromvre]

@@68Whiskey the information on the competitions

[@68Whiskey]

Ohhhhhhhh im sorry. Google. Northeast airgun classic And Rocky mountain airgun challenge. They will come right up

[@68Whiskey]

Nac is open for registration right now

[@esromvre]

@@68Whiskey thank you

[@Jason315NY]

Can you do the same video with slugs?

[@normanshanley7417]

@@twofaces4382 obviously you are an fx hater and dont know shit about what we can and cant do. your just another keyboard warrior that runs his mouth and believes the shit that comes out of it. come to rmac this year and show us what you have tough guy or go back to shooting cans in the back yard with your sling shot

[@ellobo1326]

Incredible accuracy. What weight pellet ? Thanks.

[@68Whiskey]

Thanks man. 44 grain fx brand jsb pellets

[@ellobo1326]

@@68Whiskey Perfect. I have a good supply of those for my Maverick and will likely purchase an M3 in .30. I have an M3 in .22 that is a laser. My Maverick cloverleafs at 50 yards also. Can’t beat an FX airgun.

[@erwino024]

Hi sir, do you use barrel tensioner? Or barrel holder only?

[@erwino024]

I saw on your video the barrel holder, but i didnt saw if you use the carbon tube

[@68Whiskey]

I use the carbon sleeve. But not the tensioner

[@erwino024]

@@68Whiskey Does putting epoxy on carbon sleeve improve accuracy compared to without epoxy?

[@markmoretti2431]

Wow

[@chef6842]

What length barrel are you using?

[@68Whiskey]

700 mm

[@chef6842]

Hey buddy, what pellet are you using? What grain? See you in a little over a week my man.

[@68Whiskey]

Hey man in this video i was shooting fx brand 44 grain. Same as jsb basically. I found a better pellet and will be using it at NAC. Zan made a 56 grain pellet for benchrest that i love. Super consistent

[@chef6842]

Not fair, I want to be like you. Now I have to order the 56-grain. Will the setting be the same? I'm basically setting my gun up like yours.

[@KPOYXAHTEP.]

😎👍

[@ralphcox3969]

How is it that the cold does not affect your pcp when shotting my pcp would hit much lower

[@68Whiskey]

Fx rifles are regulated. So no matter the temp the pressure applied to the pellet will be the same as long as it has enough air in the main bottle

[@ClappinCritters]

This isn't true.. air temperature will definitely cause the regulator to fluctuate pressure. Lower temps will actually cause the regulator pressure to go up while hotter temps make it go down. Don't believe me? Set a tune at 65 degrees and then take it outside when it's 20 degrees for 30 mins and see what happens.. other than that great information and shooting.

[@JoePatABC]

Why not shoot an actual 100yd BR target so there's not guessing? ... Just a thought. See you in New Hampshire. Cheers... Joe P.

[@68Whiskey]

Bc its a total pain in the ass to replace the paper all the time. And it ends up getting blown off in the wind a lot. Also i only have a few left lol

[@5stargunsandgear]

wht model is the Accutac i plan on getting one for my next FX I have one on My Begara 300 PRC its solid

[@68Whiskey]

Its an FC5 g2. Love that thing!

[@vincentvalerio915]

Isn’t the speed too slow if you can see the pellet before impact

[@68Whiskey]

No, pellets dont like to be pushed super fast. 840-880 is the sweet spot in my opinion. More stability in crosswind as well

[@MadepHunter]

😊👍

[@TheScrapyDog]

👍👍

[@TheAussie1970]

Ok. A question from Australia where suppresors are illegal. How loud are these rifles without them? Since i saw the FX range, I'm thinking of getting back into shooting. Gun laws really suck here....

[@ericaman5393]

Best suggestion: Overthrow your shit government, then enjoy having your freedom back.

[@tracyr5594]

very loud

[@226eagleeye]

I watched half of the video and I still don’t know what pellet/weight you are shooting or what speed and hell I don’t even know what caliber you are shooting. Sorry If I missed that information.

[@68Whiskey]

I probably didnt say it. 30 cal. 44 grain 860 fps

[@226eagleeye]

@@68Whiskey thanks for putting in the effort, not easy making these videos.

[@chef6842]

If you mentioned it I missed it

[@chrisfisher3900]

Bunny rabbit mortars

[@68Whiskey]

Haha absolutely

[@chipsammich2078]

What pellets?

[@68Whiskey]

44 grain fx pellets (jsb)

[@chipsammich2078]

@@68Whiskey Does FX own JSB? I thought they were 2 different entity's

[@user-rg3sv5ke8w]

What's the distance?

[@68Whiskey]

110 yards

[@JeanLucRibaud]

Mon Ami , combien de clic à 100 mètres . Thank You .

[@smashingintexas765]

You ain't shooting no SLUGS???

[@68Whiskey]

Pellets only for benchrest. Rules

[@ronweber4508]

Do you get paid for pest control when you hunt birds at farms?

[@68Whiskey]

We could but we dont charge

[@starlightHT]

If you want to improve these groups, I suggest trying other moderators brand.... Of 4 different brands the worst groups are with the dony and a half turn a flyer. Unless you can't use another brand and are forced to use it.

[@68Whiskey]

Im not forced to use anything. But i can tell you I won RMAC two years ago using a donny ronin. I love the donnyfl moderators and i dont think your statement about them holds any water personally. I understand that these groups arent one hole, but honestly i dont think thats possible with pellets from a tin at 110 yards in the outdoors.

[@james1795]

@@68Whiskey. Here Here! And we'll said.

[@starlightHT]

@@68Whiskey First, I know well. I follow the channel since the beginning. Second, if we don't try all the variants, we don't know if we are limiting the maximum potential. Third by 1 point wins or loses.... Suppressors make a big difference in group size but I think you already know that. If I said my opinion, it was to be constructive and not to downgrade the size of the groups, much less be mean to you.

[@jamescooper8556]

You are shooting a FX airgun. On a table that says fx airguns very largely. Why don't you tell the people while you're doing the video. Sales have plummeted on the impact. Because of the very poor valve system on that gun. Which causes larger FPS spread. Everybody wants the Panthers. If you want a M3 impact get up on American airgun classifieds or airgun Nation. And buy yourself a couple months old gun for $1,100.

[@68Whiskey]

Thats not correct man. They are different guns for different purposes. Personally i would never use a panthera for bench. Its a prs rifle through and through.

[@jamescooper8556]

@@68Whiskey But it is twice as accurate as an impact and that PRS b******* is just a a gimmick. Nothing more aggravating than buying a gun in 2 weeks the new one replacement comes out.

[@airgunlr5807]

I am not fx users, but I am a technician and with the same m3 I am going to upload a video with a better adjustment and a better precision than this, you every day with the same pod and I do not see anything creative, the same of everything fx users be creative of your own ideas not coyotes of other brands you were good guys when you weren't bought by anyone everything was organic

[@68Whiskey]

First of all dont watch if you dont like it. Second of all, we arent bought by anyone. We shoot what we want and receive no guidance on what to film by any company. We do what we please. Third of all and most importantly…..i dare you to run scope cam and b-roll at the same time just like i did and shoot an entire mag of pellets at 110 yards tighter than i did with no cuts. I think you are full of crap to be candid. Prove me wrong like you say you will and ill share your video on our channel. I was just filming a practice session in one take. You have the opportunity to try over and over again until you get it right, and I bet you still cant do it. Full mag, scope cam and b-roll showing them arc in or it didnt happen. The challenge is made, good luck.

[@airgunlr5807]

@@68Whiskey I'm here and I'm going for you, and I'm not going to use pellets like you used them, the pellets at that distance and more is .30 caliber is very precise, but I know you did it to achieve that precision, I'm going to do it with my weapon It manufactures for me, and with a 450mm barrel I don't know where you'll get when you see my video without cutting, and with slug not with .30 pellet which you used, but tell me what you want to defeat you pellet or slug with, and I don't need that I publish nothing of mine on your channel, I have already done many things for fx so that you can use it today and it works better for you, greetings 🫡 and a hug 🤗

[@agexsoutdoors]

@@airgunlr5807 you the boss man show them up. Lol 68 whiskey time to put some burn cream on you boys?

[@normanshanley7417]

@@agexsoutdoors why havent i seen or heard of either one of you morons winning rmac. keep shooting your squirt guns at each other in the back yards

[@chrisfigueroa3361]

​@Norman Shanley I had to delete this Foo from Instagram because like every time I would post a a clip of shooting my fx impact mk2 25 cal 700mm 34 gr fx pellets at a 100 yards he would say that I was dumb and it wasn't a 100 yards and the groups look like crap lol I'm not the best shooter either I mean cmon bro I was just having fun like we all do but this guy would want to shoot like if it was competition 🤷 lol it was like back and forth crazy man but I did block this Foo it's was when I got my first fx air gun too so I was happy with the gun and how it performed that it this dude tried to ruin my fun f@&k that bro get outta here man stfu 😅

[@user-fs4wd6gx6t]

These gun suck people, not practical in the field at all, waist of money!!! Hate mine!!

[@elvisjerrylee]

Lay off the drugs!!!!

[@threekblack217]

Hope you didnt suck danus?

[@OregonAirgunner]

What a shame, All my FX rifles are yhe most accurate air rifles I've ever shot. And, I've shot everything from Diana, Hatsan, Umarex, FX, Daystate, Benjamin & Crosman And the FX rifles were all not only works of art, but an accurate functional weapon.

[@user-fs4wd6gx6t]

Even tho I have had my fx3 awhile I still hate it not practical for field ! To heavy !!

[@Letskeepthingsreal]

There’s nothing real about KZbin influencers.

[@68Whiskey]

Youre right i made it all up

[@james1795]

@@68Whiskey. Haha! All seriousness aside.

[@normanshanley7417]

there is nothing real about keyboard warriors like yourself that dont even have a youtube channel but get on others and run your mouth

[@Soldis-vq5xg]

Shooting a gong is boring. 🥱😴

[@dks9600]

so is your comment. Grow up.

[@68Whiskey]

Not to me. Thousands of birds over and over is getting boring though 🤣