FX Impact M3 25 cal - One Tune To Shoot Them All

In this video i was looking for a tune on my FX Impact M3 that could shoot the JSB 25 GR - 34GR and the Hybride slug just by a flick of the macro dial , resulting is some great groupings on paper at 75M .

[@jasnfb3600]

Timing could not have been better, since i am in the process of converting my M3 .22 cal over to a .25 cal. Your videos are very well made as they are informative and easy to follow/understand. Love your videos and hope you continue to share more of theses types of content. Take Care and be safe!

[@Airbuks]

Thx for your support mate ! I really appreciate these comments as it helps to keep making content.

[@17chucksters]

Excellent tuning! Thanks for your work.

[@Airbuks]

Thx 🙏🏻

[@hotchihuahua1546]

Your videos are are always a cut above with useful information , thanks .

[@Airbuks]

Thx 🙏🏻

[@jettferox5660]

Great video and that's one heck of a chunk of land. It is beautiful.

[@Airbuks]

Thx 🙏🏻

[@gioanbuzzo3472]

Great video, thanks for showing us a great place to start from where to start with the M3

[@Airbuks]

Thx 🙏🏻

[@thebeardedairgunner]

Absolutely awesome video man!!!! Thanks for the Intel

[@Airbuks]

Your welcome, thx for the comment 👍🏻

[@SniperSRI86]

I like the results of the accuracy test sir and it is very useful for beginners

[@Airbuks]

Thx 🙏🏻

[@lachezardanchov7312]

Another great video, good to see you back. Nice intro music btw.

[@Airbuks]

Thx 🙏🏻

[@justinhromek73]

Nice job, lot of work there! I’ve got a 25 cal mk3 sniper coming, hopefully soon………I will start with your numbers when I get it!

[@Airbuks]

Thx for your support and congratulations on the purchase 🍾

[@brandonmatz9832]

I enjoy the shooting great work I want to get an FX Impact 3. I have the FX Impact 2 but it was one of the last ones that did not have FX Impact written on the cocking block. Internally it is an Impact 2; it's a great tool for target and pest control.

[@Airbuks]

Thx for the support mate , still love my MKII aswel . Indeed great tool specially in the ultra compact build I have done a few videos back

[@IzaelLealairguns]

Very good ! Excellent video.👊🏻👍🏻👏🏻👏🏻👏🏻👏🏻

[@Airbuks]

Thx 🙏🏻

[@maugiap9274]

@@Airbuks Hello. Im from to VietNam, how much is this?

[@calistomartins257]

Excelentes pruebas muy útil para todos 👏👏👏👏

[@jamesmitchell2241]

Great video

[@clubbyboi1]

Another good video, thanks again 👌🏼

[@stevecotton7599]

i love your bench

[@Airbuks]

I have a video with plans for it aswel 😉👍🏻

[@concepcioncarvajal4953]

Me gusta mucho tus vídeos.te los curras mucho muy bien explicado todo.eres genial Gracias

[@Airbuks]

Gracias 🙏🏻

[@texacali101]

Would you have the regulators set differently with a 700mm barrel? I don't yet have a chronograph and have made no adjustments yet to the valve spring adjuster or either reg.. I've only adjusted the micro and macro settings a bit. thanks for the video and that gun is sick.. Just got mine a few days ago

[@joielazaro6670]

nize gun and good tune sir

[@Airbuks]

Thx

[@jennysok]

Good video! My opinion is increasing reg to 130-140 bar and first reg 160 bar. Will be better result. As always love your video!

[@Airbuks]

Thx , but do you find the results at 75M/82yard should be better ? If I would raise the regulator to 130-140 I can shoot all 3 pellets by just adjusting the macro wheel 🤔

[@MORIDEUT]

This really good thanks!

[@Airbuks]

Thx

[@ronaldpierattini6909]

What a good video, I have a question. I recently had an M3 and I am setting it up. It is true that when the M3 is well set up you should hear it clearly when the plenum fills with air or is it a myth? I ask you why I don't hear it and to be clear that I have to keep insisting on searching for those sounds or maybe it's not necessary.

[@MeijerhofT]

Heel erg blij met deze video. Schiet aardige groepjes op 100 meter met de 25gr jsb maar de 34 MII jsb en FX hybrid slugs krijg ik niet in een groep. Gek genoeg doen de ZAN 33 gn slugs het heel erg goed, maar de 26 gn ZAN weer niet. Ik zit dus veel te hoog in snelheid, rond de 960 FPS. Eerst maar eens rustig naar beneden met de snelheid en dan kijken wat er kan. Top dat je dit maakt. groet, TM.

[@Airbuks]

Bedankt voor de support 👍🏻 Ben zeer blij met deze resultaten en voor een keer kreeg ik de hybride slugs in een redelijk groepje ( nog nooit succes mee gehad ) Die ZAN slugs wil ik al een tijdje proberen , nu met de schaarste rond pellets is het misschien een goed moment 👍🏻

[@NoName-gq5ic]

Hi does the magasin from the mark 2 fits the m3 ?

[@jefferybernard4800]

What are you sure the targets close up

[@hossienpakseresht3360]

Hello, great as always, I have a question, can you tell me what range finder you use, you introduce all the equipment except the range finder.thanks'

[@Airbuks]

I am currently using a hawke rangefinder, LRF400

[@hossienpakseresht3360]

@@Airbuks thanks

[@paulkunjukutty9205]

Sir what is thread size front of barrel for moderator of Impact m3.25 please reply

[@tonyhassan4285]

PLEASE tell me how you made the crony arm. Very informative video keep it coming

[@Airbuks]

Very simple mate , a 30mm no limit scope mount with a plastic tube of 30mm diameter and some big orings to mount the chronograph on it 😉👍🏻 cheap and easy

[@pcp6040]

Very good

[@rudychavira5558]

So you are leaving both regs as you mentioned, all adjustments where done with power wheel? I am shooting all the same pellets as you except for for slugs, in shooting 33gr zan what was power wheel set at

[@Airbuks]

Hi , that’s to long ago to remember, have changed the setup so many times by now 🫣 but all the info should be in the video

[@tonytowhitch]

Are you running the slug port or pellet?

[@heathhalfhill6867]

I have been having better accuracy with the 34 grain FX pellets than the JSBs? I know they are both made in the same factory but I assure you…there is something different🤷‍♂️ don’t know what but JSBs give me 2-3” groups at 100 yards and the FX 1”. Don’t understand why but it is what it is. Awesome gun and video…thank you.

[@Airbuks]

Yes the FX pellets are produced by JSB in very large batches from a new set off dies . This gives a better consistency throughout the whole batch and therefore can be better in accuracy. But I haven’t been able to get my hands on them ( difficult to get pellets these days 😬)

[@henrymoreland8719]

Good video, thank you

[@Airbuks]

Thx 🙏🏻

[@NawehBediler]

Nice skelai my friend

[@shanebagley1917]

I'm New to FX guns and i felt that your video is very helpful.but when you say 4 1/4turns on the value what do you mean.do you screw it in and bring it out 4 1/4turns . be great to know

[@Airbuks]

Hi and welcome to the hobby 👊 what I mean is actually 4 and a 1/2 LINES on the valve travel adjustment screw ( at the front between the barrel and bottle neck ) if you look close on the adjustment there are lines 😉👊

[@tmrogin1466]

Good shooting You might try sizing and weighting the Mll pellets It can make a difference Thanks for the effort TOM

[@precisionairgunninghunting6265]

I used to weigh them I found between 33.2-35.1 which is quite a difference

[@Airbuks]

I have done the weighing part , but very time consuming that I rather spend shooting 😉 the sizing I might give a try . I would do both if I go to a competition 👍🏻

[@tmrogin1466]

There is a thing called a “PELLGAUGE” ABOUT $50.00 A series of laser cut holes you push the pellet through or not. Very quick But you are right for competition YOU HAVE TO FOR PLINKING JUST PICK AND PLINK

[@iwanmwidjaja1516]

As always, very informative video. May I ask, how would you fit your fx fitted with arca rail and other Saber Tactical accesories to fit into the original FX briefcase?

[@Airbuks]

Thx , I have cut the foam in the original case to fit thé customized impact 👍🏻

[@iwanmwidjaja1516]

Thanks. One more curiosity, is that pipe from Saber Tactical holding FX Chrono?

[@Airbuks]

@@iwanmwidjaja1516 😂 no it’s a DIY thing 👍🏻 looks cool right . It’s a simple scope mount and a 30mm plastic tube 👍🏻

[@iwanmwidjaja1516]

@@Airbuks wow! From the begining I watched your video last year, I already can tell ypu are very very neat person. I like and learn a lot from watching your videos. Thanks a lot for sharing.

[@Airbuks]

@@iwanmwidjaja1516 thx for the support mate , appreciate the nice comment. Stay tuned much more to come 👍🏻

[@lorenzorommelaere9132]

Sorry for my English I am from Belgium. I want you congratulations for you good video. I learn a lot of it. En now with this video en now how I most my m3 setting. 👍

[@Airbuks]

He Lorenzo , ik ben ook can België 😉 dus Nederlands kan ook ( Frans is wat moeilijke 😂)

[@lorenzorommelaere9132]

@@Airbuks oké das tof , dat praat makkelijker. Nogmaals proficiat met je video’s heb er al een en het ander van geleerd. Nu de laatste zeker heb ook een mk3 , maar nog geen chrono wacht tot die op de markt komt ingewerkt in de loop. Maar met jou instellingen weet ik nu meer, nogmaals dank. In welke streek van België bent u. Ik ben west-Vlaming.

[@Airbuks]

@@lorenzorommelaere9132 ik ben van Vlaams Brabant 👍🏻 Een chrono is een must om deze buksen perfect af te stellen , mijn settings zijn misschien een mooi start punt maar naargelang je accessoires en harmonice beweging bij ieder schot op jou buks zal wat fijn tunen nodig zijn

[@lorenzorommelaere9132]

@@Airbuks ja das waar ik had eerst een Uragan heel toffe buks en ook zuiver. Wilde overstappen naar de fx Maar er is daar zoveel aan te regelen dat je er bang zou van worden om iets verkeerd te doen. En met zulke video’s Ben je toch al een goede stap op weg. De chrono komt er zeker maar misschien eerst een saber schouder en wangstuk.

[@Airbuks]

@@lorenzorommelaere9132 als je wil stuur me dan maar een mailtje op [e-mail] dan kan ik je mijn nummer geven , mocht je vragen hebben

[@GLCOT]

What were the out of the box settings when you got the M3? I just picked up a M3 .25 with the 600mm barrel but the settings were changed before I got it so I don’t have the factory settings. I would like to set it up for the FX 34 gr. pellets. Been working with it but haven’t had good luck so far. If you have some good settings for the 34 gr with a 600mm barrel it would be appreciated.

[@Airbuks]

Hi Gregory, the original settings of the 25 600mm I don’t remember as they where not what I needed 😉 so I swapped it to the 700mm barrel and those are the settings I came up with in the video . Pellets tend to fly accurate between 830-880 fps . So make sure you tune your gun to that range with a 600mm .

[@GLCOT]

@@Airbuks thank you very much for your reply. I have my 2nd reg At 95 as that is what I heard was the factory setting but I’m not sure. At 95 I haven’t been able to get past 849 FPS so I guess I’ll bump it up a little. Not sure what is max recommended on 2nd reg for .25.

[@Airbuks]

I guess you have to go to 110 bar -115 bar to shoot 34 grains at that velocity. The 95 bar you read on the internet is based on the 25 Gr pellets. Just make sure you keep 30-40 bar different between the first and second regulator

[@Light_357]

Question is what is the ES at the low end? I did this and at the high power end ES was 7 fps. Low end was 33 fps. One tune really isn’t great.

[@Airbuks]

If I remember correctly it was about 15ES but don’t get hung up on the ES around 20ES you can still get good accuracy. The tune can also be affected as humidity , altitude etc come into play

[@chrisfigueroa3361]

Awesome video man great shooting i just put my 25 cal heavy superior liner on my m3 and was not happy my m3 is better in 22 cal standard superior liner shooting javelin 30gr 218 very accurate out to 200 yards very accurate bad thing about that is no one is has them here in the states at the moment

[@Airbuks]

Getting airgun ammunition is tough these days we have Covid to blame for that 🤬

[@chrisfigueroa3361]

@@Airbuks yes sir I tried shooting varmint knockers 32.8 gr 217 22 cal .out of the Standard superior liner yesterday and it did work out groups at 35 yards look like I was shooting a shot gun 4 inch groups lol not good at all so I put the 25 cal heavy like I said and it was ok 👍 but not as good as the 22 cal 700mm barrel I like it better then 25 I don't know if its better because the slug is long and skinny I don't know but to me it's more accurate the 22 cal is ...

[@AbdsTechnicalLife]

Nice info

[@Airbuks]

Thx

[@loiusmonroe1146]

Where did you get the shootin?g table from?

[@Airbuks]

That’s a diy project, I just made a video about it 😉 will be up tomorrow

[@mikhailramos8682]

As always... Great Content! you did a very good job on the tuning here bud! I am still using the MkII but it shoots laser on 18 grains. just wondering if you're gonna make video about the HUMA dual regulator fitted on the MkII. Keep up the good work! Cheers!

[@Airbuks]

Thx for the support 🙏🏻 I have asked Huma for a sample to test but it never happened. Although I don’t need it on my mkii

[@silvsiri3478]

Hi from Australia

[@simonedis6741]

Have tried the new superior barrel does that need indexing too

[@Airbuks]

You can index it if you want , for this video I didn’t do that . Just put it in and shoot 😉

[@infernoreviews2529]

Awesome shooting mate, erg mooie groepjes ;). I just bought a mk3 .22 with a heap of upgrades and accesories, slug power kit, carbon fibre liner cover and carbon fibre shroud+tensioner as well as sabre tactical rail arca swiss bottom and m-lock and picatinny and top and off course a heavy slug liner all 700mm. The only things I dont have yet are the monopod and accu tac. I also want to get a donny fl for it but i really don't know which one to get. My eyes were kind of drawn to the fatboy. Can you recommend a particular surpressor ? And just for shits and giggles I purchased javelin slugs made by patriot and designed to be used with an impact in a variety of grains. Thank you for all the video's that you post on YT, they give quite a bit of insight in how to start off with impact.

[@Airbuks]

Hi mate , thx for the support and congratulations on the Impact 👌 The fat boy is a great mod but you can also take a look at the sumo or the various Huma mods . Personally if you shoot 22 slugs I would opt for the Sumo or the Huma mod40 The fat boy is a great option when you have several calibers as you can swap the inserts on that one

[@kennyk2828]

@@Airbuks what moderator are you running in this video sir ?

[@Airbuks]

@@kennyk2828 that would be the Donny FL Sumo

[@kennyk2828]

@@Airbuks Thank You Sir!

[@MrAlfasul]

hoy,wat kan ik verwachten op 100 meter met ne impact m3 - 600 mm loop , en het aantal shots per vulling ? ps sorry voor men vorige opmerking van de semi - auto test , ik shiet op een kleinere zwarte klever (semi 25 cal of 22lr shot per shot of 5 via lader daar zit ook naar men mening vershil in kwa nauwkeurigheid ) and also your english is perfect !!!

[@Airbuks]

Hoi , geen probleem ivm de comment ;-) Wat je kan verwachten van een M3 600mm hangt af van een heleboel dingen . Wil je slugs of pellets schieten , zware slugs of lichte , heb je een 480cc of een 580cc fles , 250 bar of 300bar, hoge of lage regulator druk , etc

[@AB8EAB8E]

I need that chronograph set up... What and where did you get it please...

[@Airbuks]

It’s a simple diy build 👍🏻 1 no limit scope mount / plastic tube and some orings to hold the chronograph

[@tnsharpshooter8517]

You can’t go buy first group. Barrel may shoot well. Like those slugs. Then more shots they’ll open up. Need to shoot s whole string of 25-25 shots to draw any good conclusions. Remember when you adjust power. There is something different happening inside barrel as far as pellet/slug and the barrel.

[@derivas007]

could you create a video with all best settings for each popular pellets or slugs available for .22?for example all jsb pellets/slug lines? there are nothing about good setting start set up.

[@Airbuks]

Hi , as I am not sponsorde by anyone these things cost some investment to make such a video. I also don’t believe that copying someone’s settings is the way to go as harmonics is the key to accuracy. It will give you a good starting point but won’t believe perfect. If you watched this video and some others I made you can see how easy it is to figure out the perfect velocity for your gun and particular ammunition. Hope my explanation makes sense

[@dougdishler2086]

Good advice!! Every gun is different

[@anthonygillespie4523]

I have my impact, in 25 cal with a 600mm barrel (which I just got 2 days ago) and I'm just wondering are you getting the 130 shots as advertised ? Reason I asked is because I have my rifle 1st reg set @160 and the 2nd set @ 110, hammer wheel set on 10 and the micro set @3.5 and the valve set @ 4 lines My fps is avg 955-960 with a 28 grain pellet. I get 60 shots per fill. Just wondering if my gun is leaking air after shots or is that just the number of shots I can expect with the way I have it set up ? I filed it to 250 bar and let it sit over nite and didn't see any leaks so just wondering if this is the norm for shots.

[@Airbuks]

Hi , with those numbers you won’t get to the 130 shots as the advertised 130 shot use less regulator pressure and stuff . I believe the numbers are calculated with a 700mm barrel 2nd reg at 95bar shooting 25gr at 830-850fps

[@anthonygillespie4523]

@@Airbuks OK Thxs. So how many shots are you getting and what are your settings and FPS ?

[@Airbuks]

@@anthonygillespie4523 I don’t really test the schotcount on this tune as I constantly swap my configuration to make the videos 😉 for the exact settings you can find them in the video . I don’t keep track of them for the same reason , I often look back in my videos to get a reference 😂

[@anthonygillespie4523]

@@Airbuks I found out that 60-70 shots are the norm for the tune/settings I'm using. Thxs for the help/info

[@Airbuks]

@@anthonygillespie4523 that sounds about correct 👌🏻

[@elviscochito33]

Saludos hermano, cuánto cuesta ese rifle?

[@youtubed20]

Hi, Can you adjust the valve past the 4th line and how far roughly?

[@Airbuks]

You can go to imaginary line 5 . But that’s it’s real limit . I go to 4,5 just to be safe

[@simoncoher4841]

Hi very informative video , I am looking at either a .22 or .25 in the M3 but not sure what to get Use is for small game and long range targets up to 200 yards what would you suggest thank you ..

[@Airbuks]

If you want to go long range I would advise a 25cal but with the new progress made in 22 cal especially with slugs and heavier ammunition you can take that in consideration aswel . Difficult Choice 🤔 you can always start with one and still get a barrel kit later to change caliber . That’s the easy thing with FX you can constantly change your guns like me 🙈

[@simoncoher4841]

@@Airbuks Hi mate thanks for the reply There's definitely more pellets and slugs for the .22 especially here in the UK then there is for .25 I've been doing a lot of research and there doesn't seem that much difference in the 2 calibres up to say 200 yards decisions, problem is after a 2 k bill be a while before I get another calibre so want to make the right choice if possible, Keep the great videos coming 👍

[@simoncoher4841]

Hi mate what bipod you using ?.

[@Airbuks]

@@simoncoher4841 hi 👋, I am using a accu tac bipod . I have a video about it , scroll true my channel and you will find it 👍🏻

[@simoncoher4841]

@@Airbuks Thanks mate I've just found it 👍

[@smokkelaer1]

Would you prefer a donny shogun or ronin? I see that you use the ronin? I did the same tune on my .25 sniper today. Took the regulator from 100 to 115 bar. I couldnt get the desired speed with the mk2's without a big spread of speed with the factory setting. Air usage went up 100% tho ;)

[@Airbuks]

Preferably I use the ronin, specially in 25cal .have you copied all the settings as in the video ?

[@smokkelaer1]

@@Airbuks yes, just like you did. Theusday I will be in the range again to see the progress. I will let you know how it works out

[@smokkelaer1]

@@Airbuks i did copy the settings as mentioned before. Heavys where going way to fast. I took the hammerspring finetune to 3 (wheel on max) to get some desireble groups. I pushed the 25grains at 870 on wheelsetting 7. But eventually I turned the finetune a bit to find the best groupings at 100m. To my opinion it's difficult to find a best tune for both weights. I still have a lot of mk2's, but eventually I will go back to 25 grains. It uses way less air, more pellets per box and commonly better pellets than the 34 grains. So I will set the regulator at 105 and tune it back.

[@Airbuks]

@@smokkelaer1 hi , it’s possible you get a higher FPS on my settings from this video . Since in Made the slug power kit video I have been getting reports of people having a spacer ring already installed from the factory and maybe a different spring aswel ( but I am not sure ) my M3 is one of the first ones and didn’t have that when I made this video 😉👍🏻

[@rcpilot2007]

would this tune also work on the Compact M3?

[@Airbuks]

The barrel of the compact is shorter so the numbers and FPS will be different

[@LinhLinh-lr5gw]

Hello. I am Vietnamese. love this sport. But the country is strict, her economic conditions are limited. I used a condor tree branch LW USA, ammo 635, 24 in. Ammo weighs 25.6g. How much speed should I press? Thank you very much

[@Airbuks]

Never shot a condor so I can’t help , sorry

[@LinhLinh-lr5gw]

@@Airbuks thank you very much

[@GreenTreeAirgunner]

I realize it's been year since the video, but using your settings on the M3 .25 with the power block is way off. And I also realize the addition of the power block does make a difference. Wondering if you've had a chance to recalibrate the M3 with the power block.

[@Airbuks]

Like with everything you change on your gun the tuning also changes 🤷‍♂️ I am currently running a pure slug tune and not that hybrid kind of tune 😉

[@justinhromek73]

Just got my mk3 25 cal from Utah. They sent it tuned at 915 for the 25.39 jsb’s. I’m assuming that’s a pretty good speed for those since that’s how they tuned it. What is your opinion? Hybrids have never grouped well for me either! I’ve heard the Nielsen 36.2’s do very well at 950-ish

[@Airbuks]

915 can be a very good tune aswel , if you see in my video I got nice groups aswel at 900 . At the time of filming my harmonic node of my tune prefers 850 but it possible if I pushed them Abit faster to 915 they are in the same balance ( hope that makes sense 😉 )

[@justinhromek73]

@@Airbuks yes it does! I’m probably gonna settle somewhere between 860-890. I’m trying to do it with the smallest amount of hammer spring preload I can get away with. After shooting my 30 cal impact, this 25 feels very calm. Lol

[@justinhromek73]

@@Airbuks I think Ted bier tuned the 25.39’s at 895 with the superior liner and his 33.95 mk2’s at like 860-870 I think. I think the heavies will buck the wind better but they use a lot more air….

[@Airbuks]

@@justinhromek73 yes those small variations in velocity can be between different guns to be the most accurate. It all has to do with the harmonics in your gun , if someone uses different accessories it’s possible they need a little slower or faster fps to be accurate 👍🏻 so the magic number mostly is between 830-880 but some people also get good results 900-920 with the 34 Gr

[@justinhromek73]

@@Airbuks just put the first 100 pellets through my mk3 with 33.95’s at 870. The last magazine I shot a group @50 yards, 28 shots that measured .515. 1st 10 shots measured 3/8” I don’t have room out to 100, what do you think that would equate to at 100? Hope you are well brother

[@fakirkelanaa_4096]

very nice fx impact mk3 how much does it cost if it enters my country....

[@Airbuks]

I am not a shop , so I can’t give you a answer to that

[@silvsiri3478]

I’ve got a 22 cal M3 impact sniper coming soon, can I use these settings

[@Airbuks]

You can try , but it will be shooting the 16 and 18 Gr pellets pretty fast with these settings. Or you can shoot some 22cal 25gr jsb monsters that can work well I think

[@marcialsuarez]

Can you add parts used for the chronograph holder

[@Airbuks]

It’s a diy thing , just a 30mm scope ring and a 30mm tube from a bicycle pump 😉

[@marcobet9840]

What kind of liner ? Heavy or standard liner ?

[@Airbuks]

Standard liner

[@saviofalcao670]

Which you found more accurate maverick or Impact m3 ?

[@Airbuks]

🤔 if I had to pick one I would choose the M3 mainly for its adjustability and aftermarket parts , but I never got my impact in 30cal shooting aswel as my Maverick 🤔 so I have dedicated my Maverick to 30 cal 50gr pellets

[@chrisrobinson7395]

What bipod are you using?

[@Airbuks]

I am using a accu tac bipod . I have a video of that specific model on my KZbin channel

[@1talan]

Hi Iv got a M3 .25 in 600mm. Any idea how i could adapt your tune to work

[@Airbuks]

🤔 not immediately but , you can try to up the first and second regulator by 10 bar . But to do it correctly you will have to retune it

[@1talan]

@@Airbuks 600mm barrel is 14.3% smaller. So could you increase the reg pressure by 14.3%? What about the hammer spring, would you also increase it or would you need to decrease it,because you have a shorter runway? Would be nice if it was that easy 🤔

[@Airbuks]

@@1talan sadly enough it doesn’t work that way , the harmonic wave with every shot is so different that it needs proper tuning tuning to preform optimal

[@brocwavra8813]

@@1talan I kinda got a good tune from watching Airbuks video. I have the same gun shooting JSB 34. 150 fist reg, second 120, valve 4 lines, Macro 16 micro 3.5. I am shooting the JSB 915 with a Standard deviation of 2 and spread of 5 fps. Its a laser from 0-60 yrds but I am still trying to dial in the 75 and 100 yards but I think thats shooter error. I am only getting about 35-40 shots before I have to fill .

[@brocwavra8813]

@@1talan I do not have a great group at 100 yrds yet so still need to refine my tune. Just a heads up.

[@KevinWood44]

My 600mm .25 M3 is arriving in about a week. Do you think the Ronin is the best moderator for this gun?? Other people's opinion welcome as well

[@james1795]

I have a 700mm .25 on the way. I ordered it May 4th. I have a Wildcat Compact Mkll that the go to pellets are JSB 34mkII's. I sure hope the M3 likes 34gn JSB'S & FX 34gn. Because before the China disease, I had accumulated approximately 5500 .25 pellets. So, luckily, no shortage here. Also, I do have a Ronan which will go from the Wildcat to the M3 when it arrives.

[@Airbuks]

You can use any moderator you want I am working on a video that shows that by mod works and it’s just a harmonic tuning

[@james1795]

@@Airbuks. You have brought up an interesting point. Switching from one moderator to another will change the harmonics, yes. Although, as we know, the main purpose of a moderator is to dampen sound.

[@Airbuks]

@@james1795 yes indeed , but changing moderator can impact your grouping in a big way as it isn’t tuned with that moderator

[@james1795]

@@Airbuks. Very true. Many shooters don't yet understand the fact how much the group can change and how much the point of impact can change each time a different moderator is used.

[@chanyayou]

What the best speed for slug 30gn?

[@Airbuks]

It depends from barrel and setup , you have to try different speeds between 930-980 fps

[@brocwavra8813]

Thanks for the video. I am receiving my 25 cal Impact MK3 in about a month. I am having them tune the gun to fit the 33.95 JSB. I am 100 feet below see level so I am wondering if that will add to the fps second or take it away? Air will be thicker so probably slow it down some. I am going to use this gun for hunting mostly so asked them to get the best accuracy in the tune above 900 fps. Id like some heat in the gun to have more impact.. Do you think taking the fps to 905-910 for 33.95 will produce a good accuracy for hunting at a distance of 35-75 meters ? Thanks again

[@Airbuks]

I am not really aware if it will take away from the FPS or add 🤔 I always thought the higher the more you lose ? But I am not sure if that . You can get a good tune above 900 wit the 34gr they should be able to handle it , but I wouldn’t go above 920. You can always opt for a slug at those speed with a 30 Gr hollow point, perfect for hunting. Much flatter trajectory and better bc with strong impact and expansion

[@brocwavra8813]

@@Airbuks Thank you so much. I was thinking in the air of 905-910 should be good. I will just have to experiment with the dials once I get it. I can always go back. Thanks for the response.

[@brocwavra8813]

@@Airbuks I got the Impact. Noticed I am using about 5 bar per shot. I had Utah air tune it. First reg at 140 second at 100 ish. The value adjuster is at 4 or 5 lines. I shouldn't be using this much air should I ? What are your regs set at? They say in the manual to not adjust the second regulator. Is this true ?

[@Airbuks]

@@brocwavra8813 In the manual they state that you should not adjust the first regulator ( but it’s no problem if you do and know what you are doing )the air consumption depends on what caliber and velocity you are shooting a particular weight projectile .

[@brocwavra8813]

@@Airbuks I am shooting JSB 34 grain. Might try closing the valve some to increase shot count but I will lose speed. I think at 140-145 on first reg I will leave it alone. I might bring up the second reg to say 120, then lower the macro and micro and close the valve? Maybe I can achieve the same velocity but not sure. Once you raise the second reg can you lower it without degassing the gun? Just turn clockwise correct ?

[@benstriker4546]

Als je de hybride slugs gebruikt, draai je dan de loop om of laat je hem gewoon op pellet modus staan?

[@Airbuks]

Hey Ben , ik gebruik eigenlijk altijd the slug poort . Werkt perfect en geeft wat mee snelheid 😉👍🏻

[@benstriker4546]

@@Airbuks Thanks man dat is waardevolle informatie! Wist niet dat dat gewoon kon😀

[@benstriker4546]

Ik heb nog 1 vraag voordat ik je met rust laat😀 Is de Nexus echt zo goed of kan ik beter voor een Titan of iets anders gaan?

[@Airbuks]

@@benstriker4546 mmm , het hangt ervan af hoever je wilt gaan de Titan en Helix is volgens mij de beste prijs kwaliteit keuze . De Nexus is ongetwijfeld beter , niet zo zeer in helderheid maar in definitie van je beeld ook zijn de kleuren is mooier , ook zijn de turret kliks iets beter . Maar als je een gewone hobbyist bent is het zeer veel geld voor net dat beetje beter . De Titan is de favoriet voor de meeste die ik met mijn dingen laat schieten omdat het draadkruis iets dikker is , ik persoonlijk kies liever voor de Nexus

[@songboek]

@@Airbuks Oke dank voor de uitgebreide reactie! Het is inderdaad een hoop geld. Ga eerst maar eens langs krale om ze eens zij aan zij te bekijken. Ik hoor inderdaad ook goede dingen over de Titan.

[@mrycp9324]

How many meters is this?

[@Airbuks]

75M

[@mrycp9324]

@@Airbuks What output speed is suitable for the.25MK2 2.2g?

[@Airbuks]

@@mrycp9324 depends if you want to shoot pellets or slugs

[@ronb386]

Slug power kit installed?

[@Airbuks]

No just standard

[@ronb386]

@@Airbuks Thank you. Have learned a lot from all your thorough videos! Any plans to do an upgrade vid of the Impact MKII PP to PP720?

[@Airbuks]

@@ronb386 if FX will sponsor the plenum I will do for sure 👍🏻 although the procedure is the same a installing the powerplenum video i did a while ago

[@ronb386]

@@Airbuks I don’t think you’ll have a problem getting them to sponsor. If you do, I’m sure a lot of us would be interested in a performance vid. Thanks Bro!

[@_GLWC]

Какое количество выстрелов с одной заправки баллона ???

[@Airbuks]

With slugs and a 480cc bottle about 55shots

[@_GLWC]

@@Airbuks thanks for the answer.

[@redleaderone8429]

just bought the 25

[@Airbuks]

Congratulations 🎊

[@zoltankorizs2922]

Jsb king 1,6g and jsb king heavy 2.2?

[@Airbuks]

Yes I believe that’s the weight in grams , I always refer to the grains for the us viewers 😉

[@starlightHT]

If you could only have one pcp what would it be? No price limit or brand or rarity.🖐

[@Airbuks]

😳 very difficult question ! It’s like choosing your favorite child 😉 But I guess the answer will be the impact.

[@starlightHT]

@@Airbuks american air arms evol I would like to have one of these but the price is a bit high. i have to be satisfied with my old wildcat mk2. for the present time. Abraços de Portugal

[@Airbuks]

@@starlightHT yes those Evol guns are nice 👌🏻

[@franciscodacuna5096]

Hola Muy buenos los videos Los puedes configurar para que los subtítulos sean en español Gracias 👌👌👌

[@seyhmusaltunsoz3675]

👍

[@alexstefanov8214]

Please make video in 100meters with jsb Knock Out mk2 PLS

[@Airbuks]

Maybe 🤔

[@senku3807]

What is the price of fx impact m3

[@beastmode2990]

Varies to where you live in greece its about 2.1k euro just for the rifle and another 1k for a diving bottle and a pcp compressor

[@MrAlfasul]

hoy,ga zeker u afstelling uitproberen ,met de 34 gr, wat ik nu ook al weet is da je de gun eerst moet decocken anders werkt micro - macro ajuster niet, ik al met me ne wd 40 bezig , heb een m3 FULL UPGRADE , voor ne heel redelijke prijs gekocht van ne dakwerker - airbuks die kende hij wel heel goed !!!

[@Airbuks]

Ja zeer belangrijk dat je enkel de micro en macro pas aanpast als je M3 niet gespannen is anders maak je brokken 😉 warmwalserij de reden dat hij hem verkocht ?

[@MrAlfasul]

@@Airbuks meer iets klasiek van hout, had al ne zelfgemaakte ( heel mooi afgewerkt ) kolf - scheekrest - shouderstuk ) vraagje shoot vanmorgen de m3 gaf wa condens achteraan de plenum mischien m n adem en da eagle vision magazijn da sluit zich heel slecht . Ben al meer dan 10 jaar bezig met guns stap nu gedeeltelijk over op pcp ,.maar ik ga u eens vaker nodig hebben. Voor m n m3 animal tis echt een beest !!! Prettige feestdagen vanuit de limburg ps nu zie ik als je het magazijn plat druk en de inkeping aan de uitgang pellet is een uitsparing dus langs onderen insteken ..

[@robbydinar6064]

Why don't you try 100-150 meters, master?

[@Airbuks]

Simply as I didn’t have a long enough range at that time 😉

[@christiansaerens781]

You're not using a 600 barrel for the test, but a 700 mm, and everything are différents.

[@moukafaslouka4796]

For a $2200 rifle, it better shoot hole on hole at 50 yards.

[@Airbuks]

Everyone buying any rifle at any price wants it to shoot hole in hole at any distance 🤣👍

[@siyuyu8296]

It seems that barrel need to index.

[@Airbuks]

Why do you think so ?

[@cuongha7338]

135bar OK. Made in Vietnam

[@normdesilva8770]

Dramastically

[@Airbuks]

What do you mean ?

[@aronkeylfb023]

For a Rifle with a 700mm barrel the groups are being very bad, for me, I do .871 ”at 100 meters with the 25.39gr .25 at 954fps with my 355mm TJ barrel

[@LinhLinh-lr5gw]

Helo

[@senku3807]

Hi i am from india

[@JemsMomin-es7bq]

Hi

[@dingpuiakh5532]

naaaaa....give me that damn beautiful gun..🤣🤣🤣

[@Airbuks]

🤣🤣 no

[@shawnsponds]

Element optics is very over rated… it is pumped up by FX and that s afican guy as their first generation scopes .. much better scopes out there

[@Airbuks]

🤔 I like mine, but haven’t owned enough scopes to compare I guess 🤷‍♂️

[@james1795]

@shawn. Your expert opinion is appreciated. Which I, for sure, will consider with a grain of salt.

[@brocwavra8813]

Shawn, Looking for a new scope. What recommendations can you give me. I have an Athlon Argos I love FFP. Any other companies you'd recommend Thanks

[@toddlish1892]

Your stop and go English is annoying as hell But your information is ok That accent is taking some getting use too But other than that keep up the good work

[@Airbuks]

English isn’t my native language and I do my best 🤷‍♂️ but glad you could get over it and get some info out of the video 😉👍

[@shawnsponds]

Unlistenable

[@glennclayton9900]

What’s the setup to attach the chronograph?

[@Airbuks]

That’s a simple diy setup with a scope ring and 30mm plastic tube 😉 . Fx has released a similar dedicated one aswel

[@glennclayton9900]

@@Airbuks many thanks for the reply. Do you have a link as to where i could find it please? I’ve been looking but cant find it

[@Airbuks]

@@glennclayton9900 it has been just released a few day ago , depending on where you live it will pop up at your local FX dealer

[@glennclayton9900]

@@Airbuks many thanks I found a dealer online and have ordered one.