THE LAB: How to Build in the Revolt 3

[@0mnikron702]

For those new itx builders using this case stick to low profile ram and 240 aio set fans to exhaust get yourself some good silent 120 fans set them to exhaust. And your good to go

[@hytebrand]

If this is your setup, show us on our reddit or discord! Would love to support your build!

[@pingu4755]

Hello I wanted to ask: where would I put the 120mm fans? I haven’t found any guide or anything that puts extra fans so i don’t understand where u would put them..

[@NeoR6]

@@pingu4755I think you could maybe fit a 120 mm in the extra space above the gpu but idk

[@Odd_Cinderella]

I actually would have liked to see the cable management on this. Some of us are still new to building a PC to the point of needing help with that too. Either way, neat video. Also, which cables go to which I/O

[@hytebrand]

That is great feedback. I'll forward it to the team to consider doing a video cable management!

[@Joshin-kf1vz]

I agree, I'm building in this case today, and this is my first build too. Another thing is that the on-screen jokes and "Okay" counters are distracting and are taking away from some of the important points being made. At times I have to rewind and then look away from the screen to digest the information. The extra tips that come up are nice, but some of it is a bit too jokey

[@philipxptalbot]

You can fit GPU's that are larger than their size limits. I managed to fit my MSI Radeon RX 6900 XT GAMING X TRIO card, which according to the max allowed dimensions you cannot fit. And they're right. You cannot fit it by any of the proscribed methods in the case instructions. Your milage may vary but the way I squeezed my card in is this: From a completely empty case, take off all the panels including the top panel. At the end of the PSU cage there is a panel that you unscrew and remove. The way to fit the GPU is horizontally into the case from the back, slowly bringing the GPU into an upright position as you pass it through until the card is in it's area of the case. Push the GPU aside as you fit the motherboard and shuffle the GPU into the PCI-e slot in the motherboard. Then refit the panel back to the end of the PSU cage (if you want to). This was the only way I could fit my GPU card and if I need to replace it I will have to totally remove everything else from the case first. I hope this information will help someone in a similar situation. As an aside (to HYTE), the cable management really sucks in this case!

[@0mnikron702]

I saw your video and decided to give the revolt 3 another chance I’ve had since November tried building in it but the 280 rad tubes put too much pressure one my asus tuf 3080ti so used the Nzxt H1 after seeing your video I wanted to give the case another try using a ek basic 240 rad instead. That did the trick my 5900x runs in mid 70c and my gpu stays under 75c while gaming very happy with the case now.

[@hytebrand]

Thank you for the feedback. We'll be sure to add the info to our internal compatible list.

[@heavenly2k]

This is very helpful

[@pedroblitz9607]

Whoever is the editor needs a pay raise😂

[@horseydestroyer9466]

“Okay” x4!!

[@BrandanFischer]

Just got this case earlier today and I've just been messing around with it and getting to know the ins and outs and I've gotta say that I love it! I'm getting the rest of my parts for this Mini-ITX build later in the week and I'm definitely look forward to building in it!

[@hytebrand]

That is awesome to hear!

[@BrandanFischer]

@@hytebrand It's been a phenomenal case to build in! I can tell a lot of thought and care went into the design. Thank you for providing a quality case for the Mini-ITX market!

[@hytebrand]

I hope you've shared this with us on socials! We'd be happy to support whatever you're building with the Revolt 3!

[@jaypeeplata3196]

It doesn’t say on the website but it looks like a dtx motherboard could fit into it. Definitely buying once confirmed

[@SuskenHizamura]

Does a standard power supply fit ?

[@pano3232]

Hi guys - sorry to bother you - for the PSU, where is the switch to go from 110-220v? I could not find it. Thank you.

[@angganugraha2727]

Hi just wondering whether an m-ATX board with W:17cm L:19cm form will fit ini this case?

[@GGPY]

Does this case require installing additional motherboard standoff screws? I don't see any in the video

[@sggsquadpresents]

are 240mm aios compatible with this?

[@slowmentally]

Does the revolt 3 have a pcie 3x8 pin for a 6800 or is it just 2 pcie 8 pins?

[@peppefailla1630]

Thanks god for this video

[@functiongarage]

So much potential here, but some engineering design mistakes really hold the case back. No riser card is a big win, but cable management is non-existent. Also the blank rear panel is a miss for more cooling potential. Very large ITX case, could have been an amazing case for cooling.

[@Killswitch1411]

Very nice case, got it soon as it was released and was able to get the special edition with the flight case. Well done on the video, very helpful tips for best approach to building in this case. I need a GPU to go into my Revolt 3 built.. I've been unsuccessful grrr.

[@hytebrand]

That is awesome, Thank you for your support and we hope that you are able to get a GPU soon!

[@swizzler8053]

How is the case if I may ask?

[@isbuf1529]

Subscribed

[@horseydestroyer9466]

Would you recommend just getting it without the power supply if i am worried about 700w being enough?

[@hytebrand]

Hi! You can always order a Revolt 3 without a built-in PSU if you are worried that 700W is not enough 😊

[@dv2045]

this case has the need of a bit more room for custom watercooling. meshcilious is doable with trouble but doable

[@Kevin-sl9it]

Would a MSI GTX 1080 fit in this case?

[@Suuperwuuper]

100%

[@bakerj3527]

Has anyone tried a 3080 strix in this case?

[@belsteed6050]

Please tell me there is at least room to install an atx PSU, I successfully installed an ATX PSU in a cooler Master NR200 so nothing stop me usually 😂

[@IamEpsilon27]

According to the website and what these guys just said. SFX and SFX-L only

[@teabagNBG]

why dont u ship international`?

[@hytebrand]

We are currently working on getting our international distributions up and running very soon!

[@teabagNBG]

@@hytebrand nice i will get me one once they are availible here

[@swizzler8053]

@@teabagNBG it's available here in Holland. Received mine today.

[@IamEpsilon27]

​@@hytebrandany Australian suppliers yet?

[@Xolerys]

Isnt that the guy from iBuyPower lmao

[@hytebrand]

That's our team member Brad who's head of Product overall :)

[@klebestiftlp5943]

A

[@hytebrand]

B