THE LAST EXHAUST SETUP

In todays video we finish chompers full 3" exhaust setup! I think I am finally happy with the sound at all driving conditions!
MUFFLER - amzn.to/45FGZZj
5" SHORTY TIPS - amzn.to/3P9ubDB
ROLL PAN - amzn.to/3EsNF11

[@CountyCorral]

Give it some time for those Borlas to break in they will sound better then they already do. I’m definitely stoked to see a bumper back on the rear!

[@05cateye96]

Dude at 7:09 was like damn that bish cleannnn 😂

[@BGDave]

Fr thats what I was gonna say lol

[@WyattSpeeth]

Sounds sick . That crackle is great 👍

[@02to06TUNDRAFAN]

Literally some of the best sounding mufflers. I have a set of them on my tundra too behind a set of jba longtubes duals with an x-pipe. They were expensive but worth it. Borla claims they don't have a break in period but they definitely do get a smidge bit louder after a while. Love rolling down all the windows and romping on it. Sounds so clean yet just the right amount of rowdy.

[@CarterVigesaa]

I bought the exact exhaust about 2 months ago, same headers, x pipe and borla mufflers and have been waiting to put it in my 2006 white Sierra. Now that I’ve heard a video of what it will sound like makes me so excited.

[@ericwhite6272]

Dude you nailed it with this set up. CHOMPER sounds awsome and also looks great. Keep up your positive creativity bro.

[@crank1422]

Trust me on one thing. As you get older, you’ll appreciate a quiet exhaust. I used to absolutely love the sound of everything above 105dB, but at 44, that constant cab drone turns into a headache on any trip above 50 miles. Not to worry though, you never age out of the go fast stuff. You just like to get where you’re going way more quietly, lol.

[@Brento311]

Yes! I’m 38 and my truck is pretty much all stock now. A far cry from when I was 18. 🤣

[@fish_R_stinky69]

I like no mufflers.

[@briansavage932]

Sounds great. They will break in and open up for sure. 🤘🤘

[@mattl1576]

Those mufflers will definitely open up a bit once they’re broke in. No more clap. Sounds perfect👌🏼

[@brendandevers7887]

Exactly

[@hosstompkins6340]

Really hope you have better luck with your Borla exhaust than I have. $900 on sale for my system n very unhappy with it.

[@user-lc5tl3jj3d]

@@hosstompkins6340get headers

[@ElijahColeman-wp8sb]

That sounds absolutely insane I love it!!!!!

[@josephjporcellijr4508]

It sounds great Love the tail pipes tucked underneath

[@jasonburrows5840]

Def the best sounding setup yet

[@BaSeBaLLnUgS419]

Sounds really mean without being straight piped. I like it. I have 2.5 true duals with magnaflow high-flow cats to 6 inch shortys. Gonna throw on 8 inch tips and might add an h pipe or resonators to tone it down just a little bit because im getting tired of the it being obnoxiously loud lol. NC here.

[@DarrenWS6]

Love the sound man. The Borla 40085 is an amazing sounding muffler!

[@elemental6711]

love ur vids bro!!! please keep going man i love ur content

[@mariotillery8459]

I did corsa universal muffler on my 2006 Vortec Max, and headers. Sounds great at idle and loud at WOT.

[@connerenglish2820]

This is my favorite channel keep making videos on these gmt800’s!

[@jlautomotive6349]

I would still go with the LARRY set up personally but Chopper sounds absolutely fantastic and mean as hell!! Keep up the great work!!👍

[@adamhayes9203]

Sounds good!

[@tavernwench2383]

That is a clean truck 👌

[@coffeebean2013]

Sounds Fantastic. I love my Black widow Angry House Wives on my cammed 98 ram 1500.

[@DJJDSKREWED]

sounds good mannnnnn!

[@justinidec2978]

Borla sounds awesome, black widows also sound good on a cammed ls

[@cameronbarnes2312]

I’m usually not one to comment but this exhaust sounds amazing it fits the truck so we’ll I love borla exhaust

[@Deckers_fab]

Love the exhaust hate the sound of the grapps but they also look killer

[@matthewtittle9672]

So glad you went with a borla that's the only way to go they will break in and sound great

[@sinceregrant4619]

Man i luv chomper bro i luv all the trucks but they all got different personalities man Chompers got that mean dont try me look lol 💯 kuv his sound man 🔥

[@That_Silver_Yoda]

$605 is crazyyyyyy! Got mine done with a Glasspack for 120 total

[@LowNSlow5.3]

It depends on what you already have, it was four hundred for me to get rid of my cats and muffler and get a xpipe wit dumbs

[@brananridenhour901]

I was going to change the interior back end of my truck just because of yours

[@evelynlewislewis4371]

I love church that sounds like that, you should keep it, I love watching your videos

[@brendandevers7887]

It's ok what ever he likes it's his truck

[@taylorgiesbrecht2888]

Sounds perfect... Just loud enough

[@zachcook6617]

I’m so sad that you don’t have corvette style exhaust 😞

[@flatbedtrucker]

They make a hidden hitch for that roll pan…. The license plate will be spring loaded hinge style…nice job man sounds good

[@214deleon4]

I got charged $550 for full 2.5inch custom x pipe to dual 40 flowmasters and dumped before axle. Sounds good. And worth it

[@GuapDolo]

Noti gang 🏁🖤

[@gabetorress4828]

Sounds too good I need to get mine choppin with some 3inch and a borla

[@benjamincruz514]

I’m in South Dakota and when I went in for catback duals it was 728 and some change.

[@codylebak3556]

sounds real good, i say you get some toyo proxes next

[@tonysvlogs2442]

You should start going over to lackey muffler in Pell City bro it’s way cheaper than that like that’s ridiculous $600😮

[@jaw1438]

You know your in the country when you can bust a u turn in the middle of the road

[@kennethgrossman289]

my duals i had put on from the cats back with an xpipe cost me at my local exhaust shop $400 almost 3 years ago.

[@Bama_RTMF]

I Thought that place looked familiar.. I picked up a load of trusses there a while back lol

[@johnmask7459]

You shpuld give sweet thunder a try i have some on my 6.0L and they sound amazing

[@AB-fishing_205.]

Sounds good what exhaust shop you go to I wanna get mine done and idk what’s a good shop.

[@markbixbyjr6068]

I like it that’s just how I’m going to run but with different mufflers

[@CaliOBSDriver]

What year is your truck… love the look. I have a 96’ but thinking about purchasing another year with 4 doors. My kid is 6’3 so he can’t fit in extended cab anymore.

[@Brock_Rogers]

I was thinking about the borla xr 1 for my Chevy 5.3 cat eye but can’t decide for anything lol

[@DixieNormus_69]

If you want it to sound like a vett you should get spintech mufflers and a x pipe👀

[@jacobdewitt1243]

Gotta make equal length to get the vette sound

[@thecrow1727]

Just needs equal length to sound like a vette

[@thecrow1727]

@@jacobdewitt1243like mine 🤷🏻‍♂️

[@garymitchell9152]

Looks good. How much did the shop charge you

[@taylortrest4838]

Bumper or fender exits would have been dope af

[@user-ux4wk9ov1g]

The clapping is the best part

[@Clamhammer21]

What headers are you running? I have a 6.0 in my 4 door short bed and wanna start with headers but it’s 4wd like yours and I wanna make sure I got some that fit

[@cspproductions6868]

I wanna see this truck with some wides

[@branthenderson3050]

What x pipe do you have on this and how did it go with the long tubes

[@kahlilcaver1769]

For the next project you should do a baby squat 2.0. Just go all out with it

[@colesharpe767]

Got to get you a bully dog gt gas tuner. I just bought one and I can’t wait to see what it’ll do to my truck

[@Slik-rik87]

Yea it wouldn't run with the cam, after cam swap vehicles require a custom tune.

[@logandunagin7129]

Where do you get your wheel and tire setups from?

[@Samthemule2003]

Got some southern grub while waiting on the exhaust

[@michaelanderson5229]

Sounds like a badass drag car. How much is the total price with headers? Lol

[@camdenrogers7069]

You ever do any fishing at lay lake?

[@M_Sanchez13]

True duals, 5” chrome rolled tips, North Carolina - $450.

[@streetcar4769]

Gonna be sum heat can already tell

[@tylerbuntin297]

What exhaust should I get for my 4.8 silverado that's loud but not too loud?

[@estebanchia9060]

What size are those rims and tires and where did you get them ???

[@charlesfranklin4805]

Need stall/ gears bad my man But I like it 👍🫡

[@GoVols98]

i like this video

[@jordinraposo9078]

True duels up north in New England is about $1200 is the cheapest I found

[@JacobEcret]

Have you ever gotten a vibration over 60? I have the same truck and it’s pissing me off

[@wesleymyers2818]

Ah yes no exhaust clap👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼

[@Slik-rik87]

In Florida i charge $300 for cat back up to 2.5 pipe. For a full 3inch setup tied into long tubes, all welded no bolt flanges and someone supply their own muflers would be $400 . Seems alot of places charge high prices and people are ok with paying it. Maybe i need to charge more😂

[@ericburns4718]

What was the final setup (diameter and mufflers)?

[@arcorius5852]

Did you get the truck regeared with those wheels?

[@cadenbroadus1418]

26” ltz on 35😍

[@franciscosaiz87]

I loveeeee chomper and the whole setup but that roll pans a no go for me!!!!!😏😏

[@allenjohnson2014]

Yea it sounds good glad it don’t clap anymore…chomper need some 4s and 5s with some wheel lights

[@rjparker7465]

Can you show the underneath on how it’s setup

[@KeoVore99]

That’s how much my exhaust shop would charge for that setup as well 😅

[@toddnorhton7477]

Midas wanted to charge me like $500 for new hangers and tip install with a minor bend change.. getting them done elsewhere for $185.

[@kkoch666]

June green

[@meridianmuddaddicts4905]

do you just have the cam set up? did you do anything to the trans? im thinking about doing it to my cateye. some people say you need to put a different stall in the trans when you do a cam.

[@aidenhood6347]

It all depends on what stage cam you go with a stage 1 or 2 will be good without a stall but I’d definitely recommend getting it tuned for your transmission’s longevity

[@joellim0707]

No video on your blue F150?

[@smizzyizzzy6194]

I have an x-pipe on my 97 chevy

[@fdroepman8351]

Earnhardt would approve 💯💪

[@briansavage932]

Raise hell praise Dale

[@nicholasgee4583]

Please do spin tech soon

[@cymbalenthusiast3265]

Definitely should of gone equal length for that Corvette tone. Still sounds good though.

[@tannergoodson9800]

Ik u removed the y pipe but did keep the clamps on there or u welded it

[@tannergoodson9800]

You*

[@Owen_scribner]

Pov chase recording chomper hitting the lift 🧍‍♂️

[@RaidyAIM]

Now all he needs is some g13s

[@tuckercole3088]

I wanna buy this truck so bad.

[@lathenhornback003]

The exhaust shop around me told me $700 3” pipe straight back off my Factory cats

[@aaronpodgorski1617]

Kinda looks like speed engineering

[@214deleon4]

Why not corsa?🔥

[@tylertomczak2273]

Should have went with black widow🤔 would have sounded super good

[@blaneaustin3719]

Heck naw that’s high as a cats back!

[@schlabachcs]

Do an equal Length exhaust set up

[@jacklantz4200]

I bet it’s that much cuz you got a bigger pipe usually it’s 2 1/4 or 2 1/2 pipe so maybe since it’s 3” that’s why it cost more

[@2toned.z68]

Exactly what I was thinking

[@collinwob]

Happy you tucked it up but it’s too quiet for this channel/truck imo

[@garrettpittman7374]

600 dollars? Now i know deff not to go to clanton for exhaust work...I'll stick to singletons in wetumpka where I've had mine done since I was 16 lol

[@BigSexii]

Aero turbine💯