The Magpul Bottom Line - MBUS 3

[@DayBowBow]

I have 2 pairs on 2 of my ARs. They are awesome. Way better than the MBUS2. Great upgrades guys. Thanks Magpul

[@ryanthelion408]

My Gen 2 MBUS sights require left windage 2-3 hash marks, leaving very little room to adjust. It’s a new Daniel Defense M4V7, so I’m assuming the sights are the problem and not the rail or barrel. Did you have this experience with the Gen2 ?

[@CrpMag]

There. Now everyone can shut up about them on all the other videos.

[@groberts1980]

Getting rid of the wings is huge. I've had hand guards the MBUS2's wouldn't deploy on because of those wings. Well done.

[@SoSpiteful]

I just got my MBUS 3’s and the rear sight is flawless but that front sight is ridiculously tight and VERY difficult to adjust. Any pointers?

[@Thee_Sinner]

*slams hands on table* WHERE GREEN??!!1!1!b??

[@JoelCaseyJonesMusic]

Agreed

[@NoooBama]

Did he really turn that front sight adjustment wheel that easily? What is the trick to it?

[@charlesscioli5268]

You are supposed to push up on the wheel as you turn that’s what I seen.

[@kuttinkuddy3905]

Oooo. I need a 12th magpul sticker for the safe!! Seriously tho you guy need a trade in system for the old stuff coming back off the guns..

[@ryebomb4651]

That would be great.

[@MagicalTrout]

Would probably be bad for business

[@Magpul]

carmax but for magpul parts

[@danielgumm3867]

It's called tacswap

[@michaelfranklin7451]

Bought these for my Sport 3. They were really stiff out of the package, but they loosen up after opening, collapsing, and changing several times. My Sport 2 came with Gen 2s. At first, I missed the side levers, but I’ve adjusted to leaving them in up position with red dot.

[@blaisebaileyfinnegan8202]

Do a trade in program yo.

[@panamared5975]

Has it been 15 years?

[@JackZeroZ]

FYI, ALWAYS get the black color sights for iron sights. Light scattering off of light colored sights will render the aperture(peep) sight less effective.

[@blacktoastmcbiscut8650]

Can I replace the front sight post?

[@2A4Dayz]

Dewalt… not surprised

[@saxmusicmail]

I have the MBUS 2 rears on three rifles with regular mil type front sight base, and MBUS 2 front and rears on rifles with a rail out front. I like the "wings" for deployment. I have these set up to co-witness with the "circle-dot" reticles of Holosun dot sights. But also on scoped rifles which have QD mounts if a scope failure of some sort, so still have sights. These have served me well! I haven't had an opportunity to try the MBUS 3's yet, but perhaps soon.

[@ytuploads9742]

If you zero irons through an optic, most likely the zero of the irons will change if you dismount the optic.

[@saxmusicmail]

@@ytuploads9742 Not in my experience with the Holosuns. I zeroed the Magpuls first at 50 yds, before mounting the Holosuns. Then before shooting, adjusted the Holosun so that the dot was just on top of the front sight post when looking through the rear Magpul's aperture. Very close. Only a few clicks needed to get the Holosuns zeroed. Then looking back at the Magpuls, Holosun off, the groups shot with Magpul only was right on. Same zero process with my other Magpul/Holosun equipped rifles.

[@ryanthelion408]

Did you have to set the windage left 2-3 hash marks? I bough the Gen 2 for my new Daniel Defense M4V7 and they have to be 2-3 hash marks to the left at 25 yards, which is terrible. Thought maybe I’d see if anyone else had this issue

[@markrichard2349]

I’m ticked about these mb3. The front sight pops my thumb so hard it’s painful and I have arthritis. $95 down the drain, love my mb2 which have side button.

[@christian-agk-dts-google-map]

34.v hello magpul in today's concept it's about the m bus DTS with military rear sight the ar 15 m hybrid around the military rear sight as a folding sight from the pickle terry holder and not attached to the barrel. And in combination with moe front grip m lok on the moe top for the magpul dts m bus with a Masada gas block spring and moe holder for the barrel. your AGK DTS Hypo Economist Concept Institute maison des associations Thüringen united Germany evangelische Union weaponsmith Fabriky would charge 50 percent of the final patent ©®™

[@stealingfire5036]

The editing could've been better for this video. When he's describing a detail about the sights, please keep the camera on it. Giving 1 sec zoomed angle shot on something else and then back to him talking, doesn't help us compare them...

[@Juan0481]

Love magpul, keep up the good work!

[@louispittman7367]

TruGlo has tritium backups cheaper than your stone age junk. Gunfights aren't just during daylight hours. Innovation huh?🙄

[@fourthhorseman4531]

Just put these on all three of my AR pistols and they're great.

[@baraboo-nb7hv]

Soooo the mbus2 gonna come down in price or what

[@deadbeats4894]

They need a m lock compatible version.

[@TheTradosaurus]

Worthless video. Show more closeups

[@bcoorough]

Nice job Magpul

[@orionv.13]

I have had the gen 3 for about a month now, I love them!!

[@RenaissanceThinking]

What are they made of? I've broken every set of Mbus 2's that I've used. Love the one set of Mbus Pro's I've got. I'm interested in giving these 3's a try, but hesitant if same polymer as the 2's.

[@orionv.13]

@@RenaissanceThinking it’s plastic I’ve never broken a single set 😂

[@RenaissanceThinking]

@@orionv.13 really? That's a bit disappointing but if you've had good luck with them maybe I'll have have better luck. Just ordered a set to try out. I'm pretty hard on my everyday gear especially when at the range so I'll have the problems then and not when it matters.

[@joelbeckley7924]

Innovation with Magpul is top tier in my opinion 👌 👏 A AR isn't truly an AR unless it's been Magpul outfitted. Keep up the AWESOME work!!!

[@mantis_toboggan_md]

You need to take it easy.

[@deebo5474]

*an AR

[@tangolima6462]

I have the MBUS 3 rear on my 6920, my impression is it is not as robust as the MBUS 2. I would gladly trade it.

[@CBDsutty]

Need advice here. I got mbus front and rear sights today and realized I mixed them up. Can I still use them? It’s gen 3 rear and regular mbus front. Does the thickness difference matter when zeroing later?

[@MikeA817]

start phasing out the MBUS 2 for the MBUS 3 on factory rifles Magpul gets to put them on. Make MBUS 3 the standard

[@chadlowery1098]

I love everything about this design except that I can't find a tritium front sight post that will work with them. The gen 2 used a standard A2 post of which there are a couple high quality tritium replacement options. Does Magpul or anyone your aware of make a replacement tritium front sight post option for the gen 3 mbus?

[@cz75tactical9]

Blitzkrieg does for the pro. I'd imagine the mbus3 uses the same post as the pro. Wouldn't make sense for them to make two different posts

[@chadlowery1098]

@Maverick11B I'll look into them thanks. I got in touch with Magpul directly and they confirmed the Gen 3 and Pro use the same front post. Thanks for the lead. Ameriglo and Fision make a post that works as well. I'm likely going with Blitzkrieg.

[@billydanz9048]

Hey Magpul. Just an idea....How about you guys getting with LWRC to market a 6.5 Grendel off of their Six8 platform. Then you guys can modify your Six8 mags to load Grendel.

[@speedwaypinoy]

Please bring back the dual MP7 style MBUS concept, would be great for PCC or Pistols

[@crisaocasa]

I born and living in Brasil , pleased Magpul comes to my country and your’s products

[@thegrandinquisitor8239]

Please bring back Foliage Green products even if it is just a limited run.

[@ivaylommm]

The question is- is the rear one going to clear when up, a flipped to the side magnifier just like the mbus 2 was able to ❓😳

[@DaBlaccGhost]

Got gen 3 rear on the new 10.5 They're fantastic thanks fellas

[@jerrybranstetter9826]

Pros are the best out there, they are my backups. You guys make a great product in steel.

[@johnnewisland7720]

Impressive. Very nice. I honestly hated the MBUS sights for their thickness and sight picture. I think i may get a set of these new, improved sights.

[@citizenoftheninthdivision]

I just sanded off the right wing of my front sight. These look cool though lol.

[@ShooterMedic1818]

Maybe a left handed offset Pro set? Why no left hand support???

[@kensen1070]

When would you use the bigger oppening on the rear sight?

[@cs51207]

Glad this came out. Looking at getting some sights I couldn't figure out what the differences were between all of the different sights on the magpul website.

[@xSP3CTREx]

I already picked up a couple and they are great! Def need some in Stealth Grey *cough*

[@soniaproctor9692]

Very nice sights other then the fact that they are so tight they won’t fit my pic rail so will now have to return them unfortunately.

[@SolFireYT]

Weren’t these showed off at Shot show 2021?

[@chadjones7722]

kinda mis the wings, i get why they did it so no issues, but the tool less sighting is great, overall its a great set glad i got one.

[@Hill_Billy_Without_A_Hill]

What are the torque specs for install?

[@brandonm1881]

Excited, just got these in today

[@georgegiorgio]

After a long wait, I got 10 sets for all my toys

[@scott2228]

1 of my favorite rifles is my BCM. I still took all the furniture off and replaced it with all Magpul. And BCM furniture is $$.

[@1mataleo1]

BCM makes a great rifle for the price. I have one as well and I love it

[@CalzaTheFox]

Colorado native!

[@Sam-qn4ly]

where the mbussy?

[@mmancino1982]

You know what would have been nice? If you made the front sight post alignment slot match the mbus pro. Aftermarket posts like the blitzkrieg components with the triangle or blade post don't align properly because your turned the alignment hole about 45 degree. Thanks for that.

[@pant0sand0hat]

Cool

[@joquin4618]

Just sighted in my MBUS 3 in FDE and I’m extremely satisfied. Super low profile and let’s me mount the rear sight along a holosun 510c with magnifier on the upper receiver. 😊😊😊❤

[@baraboo-nb7hv]

Are you sure paid bot? Maybe on the lower receiver?

[@joquin4618]

@@baraboo-nb7hv ??? Let’s me place the rear MBUS 3 sight, magnifier, and RDS Holosun 510c without having to mount it on the handguard. Not a bot. Geez 🙄

[@jeremykissner2281]

I've found better for cheaper

[@CGAquaholic]

Yah Jon!

[@lionsofcornwall8475]

I bought a set, didn’t even open the package. Sent them back they are just to wide and look stupid. I was expecting them to be more like the size of the mbus pros.

[@project86xero]

Can you still fold both apertures down at the same time like on the mbus 2s? I love that feature for shooting on the move inside 25 yards or so.

[@metallicsilver]

$100 for the pair is still too much for me. Should be closer to $60 for the pair and I'd start putting them on my rifles. I just buy reliable optics for now.

[@Warlock-ke2sw]

As someone who just bought the pair I cannot agree more. Granted, I wanted irons to begin with. But if your teetering I would definetly go with an optic

[@joshmajor8662]

So you fixed the bullshit lockup system, right?? Lol I stopped buying your products when the springs started not doing their job.

[@d3ltaohniner261]

Were you buying genuine Magpul, or Chinese counterfeit trash? Because the only ones I've heard exhibit flaws like you mentioned, were counterfeit.

[@davidmoorea1961]

Cool yeah, ..but can’t hold a candle to The Knight’s Armament Folding 45-Degree Offset BUIS I Have. NOT - EVEN - CLOSE…🇺🇸 #2A 🇺🇸 #AmericaFirst 🇺🇸 #Trump 🇺🇸

[@ryebomb4651]

Cool story. 😎

[@m4e1supremacy]

these aren't 45 degree offset buis, not sure why you're comparing them

[@jardo531]

Sounds expensive.

[@Justin-rq6kf]

@@ryebomb4651 Did you know Trump is not truly a supporter of the 2nd Amendment?

[@deathtothewageslave]

What happened to the maztech collab? Are you releasing the tech?