The most budget-friendly and easiest way to make a silicone mold DIY for casting plaster

The most budget-friendly and easiest way to make a silicone mold diy for casting plaster. Hey everyone! Welcome back to my channel. Today, I'm super excited to share with you the most budget-friendly and easiest way to make a silicone mold for casting plaster. If you've ever wanted to dive into the world of mold-making and plaster casting but felt intimidated by the cost and complexity, this video is for you!
In this step-by-step tutorial, I'll guide you through the entire process, from gathering affordable materials to creating a perfect silicone mold that you can use for endless plaster casting projects. We'll cover everything from selecting the right silicone, preparing your model, mixing the silicone, and pouring it to create a durable mold. I’ll also share some insider tips and tricks to ensure your mold comes out flawless and ready for casting.
Whether you're a seasoned DIY enthusiast or just starting, this method is simple, cost-effective, and delivers fantastic results. By the end of this video, you'll have all the knowledge and confidence you need to create your own silicone molds without breaking the bank.
Don't forget to like, comment, and subscribe for more budget-friendly DIY projects and tips. Let’s get started on making the perfect silicone mold for casting plaster!
Materials and tools:
• Cardboard;
• Scotch;
• Hot glue;
• Knife, scissors, ruler, marker;
• Master model;
• Small basin;
• Liquid soap;
• Transparent silicone sealant;
• Gypsum;
• Brush;
• Screwdriver with whisk;
Watch another video about making silicone molds:
How to DIY a large silicone mold inspired by Harry Potter. Casting silicone and plaster: • How to DIY a large sil...
From Print to Plaster: Crafting with 3D Models and Silicone Molds DIY: • From Print to Plaster:...
How to make a silicone mold from scratch and cast plaster figurines diy: • How to make a silicone...
Crafting Sacred Icons: 3D Printing, Silicone Molding, and Plaster Casting Adventure!: • Crafting Sacred Icons:...

[@11290slk]

I just came to see the kitty ! LOL

[@user-lk1df5lh2k]

I leave a like 👍for move your channel

[@DoasIDo1]

Thank you very much!

[@paulmarinis6069]

You are a life savior ! Could you make a video with a 2 part mold as well? Cheers!

[@DoasIDo1]

Happy to help! I have a video where I make a 2-part mold: kzbin.info/www/bejne/a566gKCBoKpkn7c or do you want me to make it from silicone sealant?

[@paulmarinis6069]

@@DoasIDo1 I guess the video you already uploaded is what I was looking for :) Cheers !

[@DoasIDo1]

@@paulmarinis6069 Thank you very much!

[@gsestream]

3d print with TPU 95A

[@tamgaming9861]

Do you think it's because it's not the right silicone, that you don't get so much details out of it as the original part? I mean when you put it on with water soap you also put in a lot of air bubbles or?

[@DoasIDo1]

In fact, the detail is quite high, about 97-98% of the original

[@swz1968]

Добрый день ! Какие параметры гравировки используете (скорость/мощность)? Заранее спасибо

[@DoasIDo1]

Здравствуйте! Если режу фанеру 3 и 4 мм, то скорость ставлю 25, а мощность 75%. При резке 6 ки, скорость 12, а мощность 75%