The Most Complete Vectric 101 Tutorial for Beginners (Vcarve, Aspire, Cut2D), CNC Router Project

If you're new to Vectric design software for creating CNC router woodwoking projects, including Cut2d, Vcarve Desktop, Vcarve Pro and Aspire, this CNC beginners video tutorial will get you started. New to CNC routers? Dive in with Garrett Fromme, CEO of IDC Woodcraft, as he helps you make sense of the Vectric software! Whether you're using VCarve, Aspire, or Cut2D, this beginner-friendly walk-through will help you get acquainted with the software's layout and its fundamental design tools. This is your ultimate Vectric training video.
🔹 *What You'll Learn* 🔹
- How the software is laid out
- Why you can't run a CNC project with the free trial of Vectric
- Introduction to Vectric's layout.
- Overview of key design tools you will use a lot in VCarve, Aspire, and Cut2D.
- Real-time design of a simple CNC router project - You'll be able to design your own CNC router woodworking project by the end!
Perfect for:
✅ CNC router beginners looking to start their journey.
✅ Individuals searching for a clear Vectric tutorial.
✅ Anyone eager to harness the power of Vectric software for creative projects.
I will guide you through the intricacies of these powerful tools and set you on the path to CNC router mastery!
LINKS
FREE Beginners Kick-Starter Guide Download ↓
cnc-articles.i...
GET FEEDS AND SPEEDS DATABASE FOR YOUR SOFTWARE
idcwoodcraft.c...
COMPUTER MOUSE (Recommended Logitech) → amzn.to/45pdDhm
VIDEOS MENTIONED
Longmill MK2 CNC Router Review → • Expert Insights: Revie...
Phantom CNC Router Review → • Phantom CNC Routers Co...
How to do stacked text in Vectric → • How To Do Stacked Text...
How to update your Vectric software → • IMPORTANT - How To Upd...
Layers → • Creating Layers & How ...
Trace Bitmaps (images) → • Bitmaps Tutorial - Eve...
Phantom CNC Systems CNC routers → www.phantomcnc...
-----------------------------------------------------
LONGMILL CNC ROUTER WEBSITE:
sienci.com/pro...
------------------------------------------------------
ONLY TRULY COMPLETE CNC ROUTER STARTER SET FOR BEGINNERS
→ 11pc CNC router bit set (w/ free vector files) www.idcwoodcra...
OTHER ‘MUST HAVES’ FOR CNC ROUTERS
→ Calipers: link.idcwoodcr...
→ Hearing protection (plugs don't work): amzn.to/2Hs1RgW
------------------------------------------------------
Recommended Design Software
→ Vcarve Pro (RECOMMENDED)→ bit.ly/3d4WrEU
→ Vcarve Desktop → bit.ly/3D4CwjH
→ Vectric Aspire → shrsl.com/37pw9
→ Cut2D Desktop → shrsl.com/36xfm
→ Carveco (budget) → bit.ly/37rhVbY
MASTER YOUR VECTRIC SOFTWARE with Kyle at Learn Your CNC
Take the full course ↓
academy.learny...
Get Weekly LIVE Training ↓
academy.learny...
------------------------------------------------------
Join CNC ENTREPRENEURS Facebook group: / cncentrepreneurs
------------------------------------------------------
CNC FREE STUFF AND MORE
CNC Insiders sign up (free files and more): idcwoodcraft.c...
------------------------------------------------------
PLAYLISTS
CNC FOR BEGINNERS: bit.ly/3rg4WTl
CNC ENTREPRENEURS: bit.ly/3mxz6Ok
VECTRIC VCARVE & ASPIRE TUTORIALS FOR BEGINNERS: bit.ly/3pdmFsi
------------------------------------------------------
If you currently own a CNC router, please take a moment to take this survey to share your experience with it: bit.ly/3r5XzNh
------------------------------------------------------
Please support IDC Woodcraft KZbin channel:
Buy me a cup of coffee: www.buymeacoff...
------------------------------------------------------
Cool vector files for CNC router & CNC laser: etsy.me/3oxX79l
------------------------------------------------------
CNC FOR BEGINNERS PODCAST: anchor.fm/cnc-...
------------------------------------------------------
Garrett Fromme
Facebook: IDCWoodc...
Website: www.idcwoodcraft.com
Email: [e-mail]
Vectric tutorial, CNC router for beginners, VCarve guide, Aspire tutorial, Cut2D basics, CNC design, IDC Woodcraft, Garrett Fromme, Vectric design software, CNC project design
#cnc #cncrouters #cncforbeginners #vectric #VectricTutorial, #VCarveGuide, #AspireBasics, #Cut2DTips, #IDCWoodcraft, #CNCDesign

[@IDCWoodcraft]

Get the FREE Beginners Kick-Starter Guide Download ↓ cnc-articles.idcwoodcraft.com/cnc-router-beginners-guide-free/

[@cncwoodcrafofficial]

good

[@chuckhigginbotham8490]

Your video helped me get started, Thank you

[@andrefonceca8871]

how to import from. files from a. usb

[@diyfullrangehifispeakers]

@@IDCWoodcraft link isn't working☮️🇦🇺

[@BradMcDonaldSalesDoc]

I'm 43 minutes into this video and here's my comment so far: I'm a retired submarine captain, a nuclear engineer, a writer and speaker; I stood in the top 10% of my class at the Naval Academy ( a long time ago) - so I'm not a complete idiot. I have a mathematical and engineering mind. But when it comes to operating computers I'm basically Freddie Flintstone. That's why I put off for so many years "diving" into the world of CNC. Now I am the owner of a Next Wave CNC machine. And after a lot of frustration with the User's Manuals and other videos this video is the first one that has put me at ease - at least so far. Now I'll continue watching and I'll comment again after I am able to compete a basic carving with my basic SD100 CNC machine.

[@BradMcDonaldSalesDoc]

Well, I feel GOOD. At least I have and know how to use a mouse!

[@IDCWoodcraft]

Brad, wow I'm glad to hear that the video is providing you with the clarity and guidance you've been seeking for CNC operation. Your diverse background and expertise are impressive, and it's great to see that you're bridging the gap between your technical knowledge and computer operation in the realm of CNC. Keep watching, learning, and I hope by the end of the video, you'll be confidently crafting with your SD100! Happy cncing brother!

[@medicman520]

I’m in the exact same boat! Twenty seven years in Intelligence for the USAF, Ivy League education in medicine and aeronautical engineering but when it comes to computers I can email, pay my bills and social media are the extent of my abilities. I still use a drafting machine on a drafting table for my designs. I FINALLY took the leap into both a CNC and laser cutter/engraver and I was utterly out of league. I’ve watched this video 3 times so far and Garret explains the basics far better than Vetric does. Now that my CNC has arrived and is operating after several problems with the controller so I’m looking forward to my first actual attempt!! I at least feel comfortable prior to going to my in person training sessions at Axiom near Nashville in late March. Fingers crossed!!

[@BradMcDonaldSalesDoc]

I should note that since watching this video, I have successfully created about ten CNC carvings. I've made some mistakes too, but all in all I'm off to a great start, which might not have been so great without this guidance. thanks for your videos and teaching style - it's helpful to this Freddie Flintstone trying to be a George Jetson. Soon I'll be buying some of your CNC router bits.@@IDCWoodcraft

[@BradMcDonaldSalesDoc]

Yeah, the good old reliable T-Square, slide rule and #2 pencil are what I grew up with.....I took "mechanical drawing" in 1967 at a Scottish Boarding School. I was quite good at it, no computers in that classroom! @@medicman520

[@BobBozeman]

Garrett is a STAR! He paces wonderfully, never takes anything for granted and makes sure to get all of the right points across - with a tone that makes you feel like listening all the way.

[@IDCWoodcraft]

BobBozeman, Thank you for your kind words about Garrett's pacing and communication style! It's great to hear that you found the video engaging. We appreciate your positive feedback!

[@mihajlozoric688]

I have been employed as an CNC Operator and I'm on training now at my company. I've worked with cnc before but it was easier and less demanding work. I have to learn a lot more. You explain everything so nicely! Continue good work.

[@IDCWoodcraft]

mihajlozoric688, happy to hear this helped brother! Happy CNCing.

[@peterrabbitwarren]

Hi Garret, I loved this video. Well worth 1.5 hours as you explained it at a great slow pace that even old guys like me could follow. My woodwork club just got a CNC machine and we need to learn so it doesn't sit there like a white elephant. I'd previously designed a speaker front baffle but I learned how to do the toolpaths so I could see the model in 3D. Just awesome. Thats going to save a lot of annoying circle routing. My port is an oval shape which is very difficult by hand. This will make cutting them a breeze with absolute accuracy...just like a bought one. Thanks so much. Peter from Australia.

[@IDCWoodcraft]

peterrabbitwarren, Hi Peter! I'm so glad to hear you found the video helpful and that it's making your CNC journey smoother. It sounds like you're going to have a great time with that machine, especially with those oval shapes. Wishing you and your woodwork club lots of fun and learning with your projects! Cheers!

[@diyfullrangehifispeakers]

Hi Garret, I loved this video. Well worth 1.5 hours as you explained it at a great slow pace that even old guys like me could follow. My woodwork club just got a CNC machine and we need to learn so it doesn't sit there like a white elephant. I'd previously designed a speaker front baffle but I learned how to do the toolpaths so I could see the model in 3D. Just awesome. Thats going to save a lot of annoying circle routing. My port is an oval shape which is very difficult by hand. This will make cutting them a breeze with absolute accuracy...just like a bought one. Thanks so much. Peter from DIY Full Range Hifi Speakers - Australia.

[@IDCWoodcraft]

diyfullrangehifispeakers, Hi Peter! I'm so glad to hear you found the video helpful and that it's making your CNC journey smoother. It sounds like you're going to have a great time with that machine, especially with those oval shapes. Wishing you and your woodwork club lots of fun and learning with your projects! Cheers!

[@TR-yn5tb]

I’m glad I found this video and decided to stay to watch the whole thing. I was hesitant to watch such a long video because too many others on KZbin aren’t worth taking that much time. Honestly, This one is different! I learned a lot. This video is much better than surfing and looking around that are either skipping steps or assume you can jump right in. Thanks Garrett for taking the time to help educate us newbies to the world of CNC. Looking forward to the other videos and getting my bits from IDC Woodcraft.

[@IDCWoodcraft]

TR-yn5tb, you are so welcome my friend. Happy to have you here and welcome to the wonderful world of CNC.

[@user-uz9wv5oi7p]

I am one of the guys that came to CNC late in life (I am now 85 yrs). At last you realise there are people who are not born with the very basic knowledge. Your points made at the beginning of your video are absolutely true. Now to find the rest of your videos.

[@IDCWoodcraft]

Welcome to the wonderful world of CNC brother. Happy to have you here.

[@thenuwagabaz9179]

@@IDCWoodcraft hi am nuwagaba Nicholas from East Africa (Uganda) could please help us on a tutorial about how to tool path photos on wood

[@bobmonday925]

I would like to see you bundle your videos in bundles of classes in a progression working up in skill levels, for example top 10 videos for beginners than intermediate and finally advance cnc’er. I am definitely not a editor so I have no clue how hard this would be to do. I love your videos because of your teaching style. Thanks for all your help. I just recently got this software and am about 6-8 months from getting a cnc due to moving out of state. Just trying to get ahead of the game.

[@IDCWoodcraft]

Bob, that's a great idea my friend. Thanks for sharing your insight and perspective. I'm glad to be a part of your cnc journey my friend!

[@tomlodge1947]

I am a retired technology teacher of AutoCAD, CNC lathe and milling, as well as woodshop. For someone beginning to do cnc routing this video is excellent. I can see where many of my other skills will transfer although I will have to learn a different terminolgy for it. I can hardly wait to use this information to work with the Laguna CNC router at Case Western Reserve University's "Think Box" Great presentation Garrett.👍

[@IDCWoodcraft]

Tom, wow thanks for all the kind words brother! I'm truly humbled and looking forward to seeing what you create!

[@Barrettzone]

I’m a 30 year IT guy and thought that this wouldn’t explain enough, but I was happily surprised at how easily he explained how to start a project from scratch to actually cutting it! Great explanation and really explains concepts in a simple to understand manner. Already started designing my own projects!

[@IDCWoodcraft]

Barrettzone, so happy to hear this one helped you brother! I am excited to see what you create. Happy CNCing.

[@Sh1tzboutagodown]

Just finished the video on my TV and I feel very confident jumping back into the CNC now. Thank you Garrett 🙌🏻💪🏼

[@IDCWoodcraft]

Sh1tzboutagodown, right on brother! I am excited for you to kick it into high gear.

[@Hateweek1984]

Garrett is doing the community, an invaluable service! Thank you so much for your cander, your tips, and teaching us neophytes....the dark arts of CNC! Looking forward to my CNC journey IDC

[@IDCWoodcraft]

Hateweek1984, thank you so much my friend. Glad you enjoyed this one!

[@CliffordGillespie-z1j]

Thank you, I have learned a lot from you . I have had my cnc for about 15 years could not find someone to explain it to me like you ,so i could understand

[@IDCWoodcraft]

user-qq6jo7vn5b, you are so welcome brother!

[@MrBwest9376]

My Lord, I have been all over the net watching different instructors talking about the CNC programs and some are good, not saying anything negative about them until i found you Mr Fromme. Im a disabled Vet with very little money coming in but you have talk me into getting Vcarve to start playing around with my CNC router. Im 75 and i don't understand a lot of this stuff but a great teacher. You explain everything so well. Thank You for Service and what your doing now. WOW, what a great Man.

[@IDCWoodcraft]

MrBwest9376, so happy to hear this video helped you out so much my friend. Happy CNCing!

[@James01520]

I have watched so many of Garrett's videos on Vcarve I am very confident in my basic design & toolpath skills. THANKS G! While I'm a slightly more experienced beginner, I still benefit from watching these basic vids to refresh my memory.

[@IDCWoodcraft]

James, you're so welcome! I'm glad the videos have still been helpful so far my friend! Keep up the great work and happy cutting!

[@EastCoastWoodworking]

Garrett I learned more in one video from you than weeks of looking through KZbin. Thank you.

[@IDCWoodcraft]

RichGallagher, right on brother! Glad to hear it.

[@slojdiskolan3314]

I'm starting my CNC journey, as a total Newbie, and after watching this video I feel properly introduced to CNC software basics - thank you!

[@IDCWoodcraft]

slojdiskolan3314, welcome to the wonderful world of CNC brother!

[@johncolling7141]

Thanks for putting this video together. I used it to see if I like Vcarve software for before purchasing a CNC. Because of your video there is one more CNC owner out there. Thanks!

[@IDCWoodcraft]

John, right on brother that's awesome! I want to officially welcome you to the amazing world of cnc my friend!

[@gerardpalmer4185]

After noodling around with a 15 year old program in my computer this tutorial was highly enlightening with many of the shortcut you exposed working in this old software. This will make the transition to newer software effortless, thanks for the breakdown for us 101’s AKA dummy like me.

[@IDCWoodcraft]

gerardpalmer4185, right on brother. Glad to hear this one helped you!

[@markcameron8515]

I can't thank you enough for this video. Excellent through and through. Also, I received my surfacing bit from you guys and it's excellent! Thank you for everything IDC Woodcraft!

[@IDCWoodcraft]

MarkCameron, im glad to hear it my friend! Keep working hard and learning everything you can.

[@raygodbout]

I don't use the Vectric software often enough to remember all the shortcuts and fluently use the menus. I find myself coming back to your Tutorial many times to refresh my memory. Thanks, Mr Garrett

[@IDCWoodcraft]

Ray, no problem brother! That's what these videos are here for my friend! Happy cutting!

[@rebates100]

Hey Garret I appreciate your videos so much. I was looking at other people’s videos and I was more confused after I saw them than I was before. I’m not a total dummy but I’m a new beginner with cnc and the software. Until I found your videos I was about to list everything on marketplace and give up! You are an excellent educator and I thank you so much for your way of presenting all this information in terms that even a dummy can understand. I can’t thank you enough! I can promise you that I will support your IDC business as I dig deeper into the cnc world. Thank you!!!

[@IDCWoodcraft]

Rebates, you are so welcome my friend.

[@chesneyamroodt7770]

Hi Garrett your time has been well spent, I really appreciate every minute that you have given to not only educate but also empower many that's subscribed to your channel including myself. thanks so much!

[@IDCWoodcraft]

chesneyamroodt7770, you are so welcome my friend.

[@willyizaguirre2401]

Thank you! Had my CNC for over a year and thanks to your video I was able to make my first project!

[@IDCWoodcraft]

willyizaguirre2401, you are so welcome my friend.

[@LYTOMIZE_Woodshop]

Thanks! It's been almost two years since I've started watching your channel while prepping to buy a Longmill... and I've been using my machine since February 2022. I always watch your new content for beginners in case something new pops up... this is your best beginner video yet. The bonus for those starting out today? The IDC Woodcraft app... I love it and always use it as my resource to double check before click start! Keep up the great work, Garrett!

[@IDCWoodcraft]

LYTOMIZE_Woodshop, I am so happy to hear that all these resources I provide have been helping you so much brother, including the app! Keep up the hard work and learning everything you can. Thank you so much for the support!

[@bobhally2951]

Thank You Garrett. This video has helped me more than i can tell you. I have indeed been watching sooo many youtube videos and getting increasingly frustrated with the lack of clear instruction on the basic operation of the software as well as the machine setup. Thank you ! Your hard work to put these tutorials together is very much appreciated.

[@IDCWoodcraft]

BobbyHally, you are so welcome my friend. So glad this one helped you!

[@donweiss8552]

Thank you Garrett I am gathering information before I purchase my CNC Router. Your educational videos have been enorrmously useful to me. I am so lucky to have found your videos. Again thank you.

[@IDCWoodcraft]

donweiss8552, you are so welcome my friend! I am excited to see where your CNC journey takes you.

[@C-M-E]

Over the last two weeks, I've picked up an entry size for my purposes CNC, couple bits from you guys and other places, and have tried no fewer than 6 CAM software packages. I'm transferring a lot of accumulated knowledge so it's pretty easy to figure out a program for me, though there's a lot of necessary details, specifically the bits, that will trip me up at times. Kind of like trying to muddle your way through a new language that some terms you just don't know. Anyway, I'm primarily going after 3D cutting capabilities, which has dramatically reduced available solutions, but I've been really impressed with VCarve. It does everything I need it to do with great resolution and a mostly uncluttered UI, where some software will do XX really well but the UI is a mess, or others have a great UI, easy to figure out, but don't have the capability I need for several upcoming projects (making parts and doing molds most immediately), or having importable tool libraries. I was really using your video to see if there were any tricks I may have missed or other capacities I've not explored, but enjoy the channel in general and think I'll stick around. 👍

[@IDCWoodcraft]

C-M-E, I'm glad to hear you've found success with VCarve for your 3D cutting projects! It sounds like you've put in a lot of effort to find the right software fit for your needs. Keep exploring and experimenting! Thanks for your support and for watching our channel!

[@markverbruggen3900]

Garrett, your videos are the best tutorials. I don’t understand why you don’t have 100,000 plus subscribers. Meet up the GREAT work.

[@IDCWoodcraft]

Hi Mark. I'll get there for sure! Thank you for the compliment

[@markhowell5904]

Thank you! Finally, a beginners approach from someone who knows the ropes! I can dust off the Rockwell Shark. I have had over 12 years and get to work. It's better late than not at all. Thanks again, and keep up the good work!

[@IDCWoodcraft]

markhowell5904, You're welcome! It's never too late to get back into woodworking. Enjoy working with your Rockwell Shark!

[@viewit2500]

I viewed the beginners' videos last year and thought I would come back for a review; I still have problems at times. This video is excellent for beginners and those reviewing the basics as well. Thank you, sir, for the instruction. Just a note, I have purchased the beginner set and some of the other bits you sell. I only broke one, working on oak and plunging without a ramp. I am better now.

[@IDCWoodcraft]

viewit2500, right on brother! It sounds like you are rocking and rolling over there! I'm glad to hear this video has served you well and it is always here to refresh on anything that gets rusty over time! Keep up the excellent work my friend and happy cncing!

[@davidhittenberger1651]

Thank you Garrett! I’ve been floundering with Vectric pro! Really frustrated myself for almost 2 weeks trying to get my Axiom to work! Thought, since I knew carbide, it would be easy-NOT! These videos that you do are fantastic!! Thank you!

[@IDCWoodcraft]

Davidhittenberger, you are so welcome my friend! So glad to hear you are sorted out and ready to go.

[@mtnjak]

The timing of this video couldn't be better. My new CNC just showed up yesterday. After I get it setup software will be the next step. Perfect!

[@IDCWoodcraft]

mntjak, right on brother! Happy creating!

[@alstreader1]

This is the best 101 I have seen in a long time. By having it all in one video makes it easier as you are not jumping around to find the relevant content.

[@IDCWoodcraft]

alstreader1, wow thank you for the kind words my friend! I'm glad it was helpful for you! Happy cncing!

[@edmundcox9224]

One of the most helpful videos in a LONG time, Thank YOU!!!!

[@IDCWoodcraft]

edmundcox9224, I'm so glad you found it helpful! Thank you for your kind words!

[@charlestrotter7326]

Hands Down this is the BEST beginner tutorial I have come across so far. It is full of valuable information, and I very much appreciated all the extra information you injected into the tutorial. It is very often important to not only know what a software feature does but why and when it should be used as well. I would have only changed one thing in the video. Since this is a beginner video, it would have been nice to see you take the saved project to the CNC machine and demonstrate the actual procedure of executing the gcode to cut out the project. I was expecting that and was left wanting. Overall, this was the best video I have come across! Great job. I will be watching more (all) of your other videos.

[@IDCWoodcraft]

charlestrotter, I am so happy to hear that this video helped you so much brother! Keep working hard and learning everything you can.

[@johnhulbertyahoocomc]

omg I just finish your pizza peel. I had a little trouble, I realized I had to download your tool database which I did and tool paths came out great. Great videos, great info. I only have the free version because you said a person should start practicing with the software before they purchase a machine. I wasn't sure what machine to buy as I started watching your videos and you explained the difference between the three sizes of long mill and when you stood on top of that 48" mill I new that was the machine. So I will continue going though more info of yours and hoping to purchase the 48'' long mill in a few months. Thank you brother you are making a difference.

[@IDCWoodcraft]

JohnHubert, im so glad to hear that brother! Congrats on wanting to jump into Longmill in a few months! I was wondering if you could do me a favor, if you can use my link when you buy your longmill. It gives me a little pocket change. Thanks! Here's the link, if you decide to use it: sienci.com/product/longmill-mk2/?ref=IDCWOODCRAFT

[@jrz931]

Excellent beginners video. I don't currently own a CNC machine yet, because i am trying to educate myself on how to run the software first to cut down on the mistakes. Thankyou for covering even the most simplest of tasks as these are all new to me. I know the time watching these videos is well spent and I thankyou for all the knowledge and encouragement you give along the way.

[@IDCWoodcraft]

Jrz, you are so welcome my friend. Happy CNCing!

[@normanstreeter5206]

Garrett, I am truly impressed with not only this video, but how much improved they have become. And your ability (call it showmanship) has also improved from two years ago. I truly appreciate these videos, and yes, I will most likely take Kyle's master course. Thank you sir!

[@IDCWoodcraft]

Norman, wow thanks for all the kind words my friend and for sticking with me brother! I hope you end up giving the course a try, Kyle is a wizard at all things Vectric! Happy creating!

[@rakentrail]

Garrett Complete dummy here. LOL! I'm looking to use this in my hobby-business. Inlays on guitars and such. Basically cutting out the inlays and plowing out where the inlay goes! Headstock head plates and sound hole rosettes. I believe the Cut2D will do what I need. Thanks

[@IDCWoodcraft]

I would not recommend cut 2D for the inlays that you want to make. You want v carve inlays. They seat much better. That will require you to get vcarve desktop or pro. The difference between desktop and pro is desktop will only allow you to work with projects or no bigger than 24 in. So if you're going to inlay on guitar next, you will probably want to use the pro version . That would be this one sienci.com/product/vectric-vcarve-pro-v11/?ref=idcwoodcraft

[@burakloft568]

I have been watching your videos and I really appreciate your help with this. I just ordered my long mill 30x30 looking forward to marking things. I have been doing it all by hand. It takes lots of time to do it by hand. Looking forward to use CNC to do the job faster plus more consistent. Thank you for doing the video.

[@IDCWoodcraft]

Burakloft, congrats on your new CNC machine brother! I am excited to see what you create.

[@dennisbracci9212]

Thank you. I am trying to learn as much as i can about cnc. Your channel is like the one stop shopping center for cnc knowledge. Thank you again

[@IDCWoodcraft]

Dennis, thank you for all the kind words my friend. I'm truly humbled! Keep up the excellent work brother and happy carving!

[@Sledgezzer]

Had watched your earlier beginner video, this one is most excellent!

[@IDCWoodcraft]

Sledgezzer, so glad to hear this one helped you brother! Happy CNCing.

[@Coffeeology]

I cannot thank you enough for your content. You explained better than 3 hours in a lecture from a "CNC master"

[@IDCWoodcraft]

Coffeeology, wow I'm humbled! Thank you for the kind words and support. Happy creating!

[@johnrhodes5968]

Love your videos, always explained in "Layman's" terms making it easy to understand for the absolute beginner like my self

[@IDCWoodcraft]

johnrhodes5968, Thank you so much! I'm glad to hear that my explanations are helpful to you as a beginner. Keep practicing and you'll improve in no time!

[@SuperGadkins]

Thanks to this video I was able to successfully design and complete my first solo CNC project. Great job!

[@IDCWoodcraft]

SuperGadkins, right on brother! Im happy to hear it. Congrats on your first successful design.

[@phippsclanva]

I cannot emphasize strongly enough how good Garrett's starter set for CNC truly is. I have quite a few bits, but non compare to Garrett's set. I have Bosch, Amana, etc. and Garrett's bits will outperform those bits on most occasions. Support a fellow CNC'er today!

[@IDCWoodcraft]

Phippsclanva, so glad to hear that you enjoy those bits brother! Happy CNCing.

[@robertlacapra1662]

I just purchased the Vcarve Pro last night. This video is very helpful in teaching me the basics of the software. Well done!

[@IDCWoodcraft]

RobertLacapra, glad to hear this one helped you brother!

[@user-pd9lz2tc5o]

I HAVE NOT PURCHASED ANYTHING YET, STILL INVESTIGATING. THAT BEING SAID, THIS IS FANTASTIC INFO. CAN'T WAIT TO ORDER MY MACHINE AND SOFTWARE. THIS VIDEO HAS GIVEN ME THE CONFIDENCE TO HAVE SOME FUN MAKING THINGS.

[@IDCWoodcraft]

Right on brother! Glad to hear this one helped you. Welcome to the wonderful world of CNC.

[@wompidydompidy]

Enjoying the tutorial. I like the pace and patience of the instructor. I will be CNC'ing soon.

[@IDCWoodcraft]

wompidydompidy, That's great to hear! CNC woodworking can be really rewarding once you get the hang of it. Have fun with your projects!

[@fredlef100]

To be honest I did think the video was very basic and proceeded very slowly - however I acknowledge that there are people who do need that level of instruction. That being said I also found it to be informative. It answered more questions for me than I thought it would and I learned quite a bit. Definitely easier than poking around. So now I'll have to continue watching your videos :). The one remaining question I need to resolve is - with a Snapmaker 2.0, with it's bed size, why do I need VCarve Pro instead of VCarve Desktop. I see in the comparison chart there are some differences so hopefully subsequent videos will make that clear. Thanks!

[@IDCWoodcraft]

fredlef, great question brother! The biggest difference is that with Vcarve pro you are not limited to the 24"x24" project size. With bigger machines, this becomes a big problem.

[@roblehmann2378]

Another great video, I downloaded the free version of vcarve pro the other day and started to play with it and try to teaching my self with the software... and going back and watching more of your videos.

[@IDCWoodcraft]

roblehmann2378, the free version is a great way to start out brother! Keep working hard and learning everything you can.

[@joemarrero7015]

Wow thank you this is helping me so much thank you I bought my cnc in dec and still have not learned what do to and this video is helping me so much and understanding how vectric works

[@IDCWoodcraft]

joemarrero7015, You're welcome! I'm glad the video is helping you understand how to use your CNC machine with Vectric software. Keep practicing and you'll get the hang of it in no time!

[@WoodworkPinas]

This video is very informative and you're very thorough in the way you explain things. I'll definitely watch the rest of your playlists. 😊

[@IDCWoodcraft]

WoodworkPinas, Thank you for your kind words! I'm glad you found the video helpful. Enjoy watching the rest of the playlists!

[@ulissesortiz9495]

found you by accident and am so glad! been fighting this for a year now. I'm good with basic 2d but want to de 3d stuff ... been trying to learn Fusion 360 but failed, so saw one of your videos and decided to get vcarve and follow along Hopefully finally be able to do the 3d carvings I want soon

[@IDCWoodcraft]

ulissesortiz9495, I'm glad you found my videos helpful! Vcarve is a great software for creating 3D carvings, and I'm sure you'll find success with it. Keep practicing and experimenting, and you'll be carving intricate 3D designs in no time!

[@richardwilliams5520]

You did a great job on explaining the Vectric program to the beginners. I wish I had seen this when I was starting out.

[@IDCWoodcraft]

richardwilliams5520, glad to hear it brother! Happy CNCing.

[@debbieleasure1637]

Thank you Garret. I learned more in this video on the basic, than Marks video. I am only in part 3, but now I can put his to more use. I like Marks dont get me wrong. With yours I can know use my Vcarve to design.

[@IDCWoodcraft]

debbieleasure1637, You're very welcome! I'm glad to hear you found the video helpful.

[@user-re6ti1qg3g]

The best online tutorial that I have followed!! The pace is great and the content relevant for me to understand and follow along.

[@IDCWoodcraft]

I am so happy to hear this one helped you brother! Happy CNCing.

[@dduncan221]

Having many years of self thought Photoshop a lot of this I have already learned and I believe it will come natural to me. I see The key strokes are the same. Photoshop has always been my hobby, also all types of woodworking and have a passion for learning As Much as I can before I go. 69 today and in the market to finely buy a CNC once I do my research.

[@IDCWoodcraft]

dduncan, right on brother! I am so happy to hear this video helped you. Keep working hard my friend.

[@marcdoiron6301]

Totally amazing Garrett, I love the step by step explanations and the attention to details. This is truly appreciated! Thx again!🙂

[@IDCWoodcraft]

Marc, thanks for the kind words brother! I'm glad to be a part of your journey and hopefully make things a little easier along the way!

[@sparky494112]

Glad for guys like Garrett helping us newbies out. I have purchased a large CnC and would like to make my own stair stringers. I assume this won't be too difficult to route the stringers and risers, using V-Carve Pro. Anyone ever make their own before? Any help or advice would be greatly appreciated!

[@IDCWoodcraft]

sparky494112, That's awesome that you're diving into making your own stair stringers! Using V-Carve Pro will definitely be a big help in routing them out. Make sure to measure accurately and secure your material well before cutting. Remember to do a test run on scrap wood before using your final pieces. Good luck!

[@trumanwright9493]

I have been using VCarve as well as your video for a while. Your Videos provide great information at a rate that can be easily absorbed. Please keep up the good work. Even having listened to several of your advance video I came back to this one. It is a great refresher on the fundamentals.

[@IDCWoodcraft]

Truman, right on brother! I'm glad the videos have been helpful for you so far! And thanks for all the kind words!

[@ifiwooddesigns]

Your router classes are top notch. Still don’t have a CNC and haven’t pulled the trigger on any particular one yet. But your. Videos are very informative and I’m saving them in a playlist to watch once I do get one. Keep up the great work.

[@IDCWoodcraft]

ifwooddesigns, thanks for the kind words my friend. I'm looking forward to you getting your machine and seeing what you create!

[@jonathangillen21]

The most detailed explanation video I've watched for cnc beginner's yet!! Thank you😎

[@IDCWoodcraft]

Jonathangillen, you are so welcome my friend.

[@ailesonlab]

it was basic (just like you said)... I waited and waited and then finally the toolpaths explanations was just what was needed. thank you.

[@IDCWoodcraft]

Ailesonlab, you are so welcome my friend. Glad this helped clear some things up.

[@ailesonlab]

Im considering getting a CNC (Newbie). The machine itself doesn't scare me, the Software doesn't scare me, it's the router bits and the feed and speeds that concerns me. Seems like there are so many variables. Where to start? @@IDCWoodcraft

[@terrybohanan-u3g]

I have had a stinger II for about a year now but only get a chance to play around in the fall and winter. That's why videos like this help me out considerably. Thanks for all the great info you shared. Terry Bohanan

[@IDCWoodcraft]

Terry, you are so welcome my friend.

[@KevinKelley-ij1nw]

You are a fantastic creator and teacher. What a great video. Can't thank you enough.

[@IDCWoodcraft]

KevinKelley-ij1nw, Thank you so much for your kind words! I'm glad you enjoyed the video and found it helpful. Keep on creating!

[@leestringer]

Im fairly experienced with vector software (Adobe Illustrator) but know nothing about CNC. I just ordered my Longmill (from the advice of a certain someone) and I'm getting familiar. Great video. Thanks.

[@IDCWoodcraft]

leestringer, you are so welcome my friend.

[@lonnyharris6464]

Couple of things: (1) I love your videos and (2) your bits are amazing! Keep the videos / trainings coming!!

[@IDCWoodcraft]

Lonny, thanks for the kind words of support my friend! Happy cutting!

[@stephantaylor3433]

This has been a great help. I also love your bits. Still curious about the open bag of M & M's. Thanks for the cup.

[@IDCWoodcraft]

stephantaylor3433, you are so welcome for the extra goodies brother! Happy CNCing.

[@fablabifurniture643]

Thank you, we have learned a lot from you...we can feel your passion in explain your content about CNC router project in detail..Great job!! ☺🧡

[@IDCWoodcraft]

fablabifurniture643, you are so welcome my friend.

[@jerryennis]

Amazing video for beginners! Also, thank you for the database file for the bits. Huge assist!

[@IDCWoodcraft]

jerryennis, Thank you for watching! I'm glad you found the video helpful. Enjoy using the database file for your projects!

[@spambox7397]

thank you for the information. I feel much better about my extremely large purchase. I will definitely be buying the vcarve pro Software. And yes, there were some slow times in the video rising tide lifts all boats. And thank you again for this great information look forward to purchasing your starter bit set and signing up for Eli’s training program. Thank you.

[@IDCWoodcraft]

Smapbox, you are so welcome my friend. Welcome to the wonderful world of CNC.

[@danlacroix9185]

I was asked by work to learn CNC programming, and this seems to be very helpful. now time to try it out to see if I understood. lol cheers

[@IDCWoodcraft]

DanLacroix, I am so happy to hear it brother! CNC programming is a fun world to be in. Hope you enjoy the journey.

[@threedogsandacamper503]

Thanks, this is very helpful. I’m brand new to CNC and Vectric.

[@IDCWoodcraft]

threedogsandacamper503, you are so welcome my friend.

[@keithclark8030]

Oh, my goodness, I like the Jeep sign...haha. Thank you for the video. I am trying to learn everything I can about CNC software before worrying about any machine. This video helped. And yes, I will be looking at Kyle's course.

[@IDCWoodcraft]

keithclark8030, I'm glad you liked the Jeep sign! It's great to hear that the video was helpful for your learning journey. Enjoy diving into CNC software!

[@keithclark8030]

@@IDCWoodcraft Thank you and I will. I am weird about liking software and programming stuff. I know you are busy, but I ran CNC with Dana Corporation a while back. Hope I can do well at this. Just love creating things.

[@keithclark8030]

By the way, I am interested in the LONGMILL for starters. Thank for the information.

[@larrylouis8528]

I enjoyed the way you explained everything and how clearly you made it. Thank you.

[@IDCWoodcraft]

LarryLouis, you are so welcome my friend.

[@CarlosRivera-cb3gx]

I have learned sooo much, thank you. I will keep watching your videos, including Kyles.

[@IDCWoodcraft]

CarlosRivera-cb3gx, you are so welcome brother!

[@bantuandproud8456]

Sir, your explanations are crystal clear. Any newbie can start crafting something out of this session. Thank you!

[@IDCWoodcraft]

Bantuandproud, you are so welcome my friend.

[@pnoel4936]

Thanks for this Garrett, after last night's Wednesday get together, I had more questions, and this has answered it. Thanks so much for your help.

[@IDCWoodcraft]

Pnoel, you are so welcome my friend. Glad this video helped clear some things up!

[@fredsmachinewerks4811]

That was awesome. Very good explenation. Well worth the wait. Keep the tutorials coming. Cheers

[@IDCWoodcraft]

fredsmachinewerks4811, you are so welcome brother!

[@randynason2822]

Garrett thanks for the great video. I downloaded v/pro trial and will work around in this version till I get my longmill hopefully sometime in 2024. That will be my pre retirement gift and I will be purchasing bits from you at that point. Keep up the fantastic work!

[@IDCWoodcraft]

RandyNason, that is a great idea brother! Now is the time to learn the software and get up to speed on when you are ready to jump in head first!

[@YuvakTuladhar]

Hi Garrett: I just bought the VCarve Pro Masterclass through your link below. Looking forward to learning. I am also planning to order the VCarve Pro software once I get a hang of it, of course through your link.

[@IDCWoodcraft]

YuvakTuladhar, right on brother! Congrats on jumping into CNC with the course.

[@stevehubner560]

I don't have a cnc yet but by the time i watch all the info you have give it wont be long Cheers

[@IDCWoodcraft]

stevehubner, so glad to hear this one helped you brother!

[@XPEZX]

Just discovered the channel, thank you for the great opener for new cnc users

[@IDCWoodcraft]

XPEZX, welcome to the wonderful world of CNC brother!

[@AlistairMc]

I also have bounced from video to video, in the early learning process. However, I have found this particular video tutorial very condensed in a very ergonomic step by step way. Definitely an essential tutorial I would say. Alistair McIntosh

[@IDCWoodcraft]

AlistairMc, I'm glad this one was helpful for you my friend! Happy cutting!

[@andrewmcallister9250]

Thanks Garrett this was very informative and simple to follow ! 👍

[@IDCWoodcraft]

andrewmcallister9250, You're welcome! I'm glad you found it helpful. Keep practicing and you'll get even better at woodworking!

[@Dalecase67]

You truly created a great starting point for me to get going. Thank you so much.

[@IDCWoodcraft]

Dalecase67, you are so welcome my friend. So happy to hear that this one helped you.

[@lippa618papalee4]

Thanks Garrett, as usual your teachings are MOST AGREEABLE my Brother

[@IDCWoodcraft]

lippa618papalee4, you are so welcome my friend.

[@patwinders7739]

Greetings from Australia, By the end of this session I’m going to purchase Vectric Vcarve Pro, from the reference from your list. I have a Fox Alien Masuter Pro, My very firts and attempt at CNC’ ing

[@IDCWoodcraft]

PatWinders, welcome to the wonderful world of CNC brother! I am excited to see what you create.

[@Allsource-inc]

Thanks Garrett for all your hard work.

[@IDCWoodcraft]

Allsource-inc, my pleasure brother I'm glad to help!

[@rudygarcia8920]

Thank you so much for giving us all this great tutorial videos,, simply awesome and you have alot of patience and are a very good teacher....again thank you

[@IDCWoodcraft]

rudy, you're so welcome! I'm happy to help brother!

[@user-by9ky9qp3c]

Thanks for the info, the best beginner video by far

[@IDCWoodcraft]

user-by9ky9qp3c, you are so welcome my friend.

[@Iggyshere]

I am a beginner. I will be learning on 3018 pro cnc. This was given to me. This has both a spindle and laser engraver. I am already upgrading this cnc but I want to learn first on the stock given set up. The spindle has 10,000 rpm speed and the laser diode has 3 watt optical output. This is where am at to start as a beginner. 😊

[@IDCWoodcraft]

Iggy, welcome aboard brother! I'm glad you have your machine and I'm excited to see your many creations to come!

[@TinovanRijswijk]

Thanx for the lesson! As a Dutch dummy a learned a lot!

[@IDCWoodcraft]

TinovanRijswijk, you are so welcome my friend.

[@QAYWSXEDCCXYDSAEWQ]

Just started, but like the content so far, no idea of the difference between these two and better the fact that you can upgrade them. Would love to see a comparison between Shapeoko s/w and vCarve. A ton of videos on what it does on their site showing you how to use it, including the differences between the free and standard versions.

[@IDCWoodcraft]

QAYWSXEDCCXYDSAEWQ, I totally understand brother, sometimes it's hard to find the info about the different versions of the Vcarve software. Basically, these are the main differences between the 3 versions: Vcarve Desktop: You can create designs with dimensions up to 24" x 24". Depending on what you are making, this may or may not work for you. You can also cut out 3D projects, but you CANNOT design/create your own 3D project. Here's the link → bit.ly/3D4CwjH Vcarve Pro: You can create larger projects that are not limited to specific sizes (unlimited dimensions). You can also cut out 3D projects, but you CANNOT design/create your own 3D project. Here's the link → bit.ly/3d4WrEU Vcarve Aspire: The same as Pro in terms of dimensions (unlimited dimensions). But you CAN design and edit 3D projects. Here's the link → shrsl.com/37pw9 These are the basic differences. But you can also choose to purchase one and upgrade to another for just the difference in price. Ex: if you buy the Desktop version, you can always upgrade to the Pro version at a later time if you end up needing it for just the difference in price between the two. As for the free vs paid version, you can design projects with the free version but the only difference is you wont be able to save the toolpaths to cut it out!

[@johnhulbertyahoocomc]

Hay Garret thank you for all the info. Yes it was long but great info. I think i can start creating toolpaths without much trouble. I will be downloading that pdf and ordering up my desktop Vectric software. thank you for your time looking forward to more videos.

[@IDCWoodcraft]

JohnHulbertyYahoocomc, you are so welcome brother.

[@JamesSmith-eh6sd]

I finally have enough confidence to try out my machine.

[@IDCWoodcraft]

JamesSmith-eh6sd, That's awesome to hear! Just remember to take your time and stay safe while operating your machine. Good luck with your project!

[@jamesrandolph3075]

Picks and Shovels for the Gold Miners.....you're a genius!

[@IDCWoodcraft]

James, thanks brother I'm glad you enjoyed it!