The Most Haunted AEG's You'll See In The Next 8 Minutes

[@TheJonek]

This isn't a horror movie. It's a snuff film because that thing was murdered.

[@MrGashforCash]

I had an M14 gearbox to work at, guy bought it used from another guy... Motor had a really hard time pulling the spring back, and he didn't know why... As soon as i took the GB out, i realised there was grease on the entire Gearbox, HopUp unit... grease everywhere! So i took it apart to find the gearbox literally filled with heavy duty machinery grease, all the gears, the spring, the fucking piston... it was everywhere... some people shouldn't be allowed near AEG's

[@angeloryckaert8536]

Probably the dude was loading his other barrel 😂. Dude you are hilarious but straight away a great tech! Don't know why some people hatin on u, I just love it finally a dude that's fair and true to the customer and viewers. Keep the great work coming!

[@gambitcustomairsoft8650]

Good old gremlin guns. I learned to swear in different languages just to keep them fresh 😂

[@danielreilly8702]

Those MP44 are a headache. I once got a cherry AGM and found the barrel's hop window was milled 5mm too far down the barrel.

[@kuerbis27]

u sure that's grease and not another white-ish slimy substance we all know?

[@bradleymorgan8223]

Many whitish slimy substances harden into a yellow crust that breaks appart into powder...

[@marcgastright4882]

curdled milk

[@kuerbis27]

@@bradleymorgan8223 dude, too much detail

[@RekzysTheTitan]

bradley morgan snort it like cocaine lmaoooo

[@HugoMMendes]

i wish i had 1/4 the skills this dude has. i mean , connecting and disconnecting the battery is already an adventure to me!

[@davecarpainter]

That was one of the best videos I've seen in a long time. Loved the "I've got school tomorrow" skit. Keep it up bud. Love the videos

[@vince_nevermind1159]

This reminder the asg spas 12 I recently bought second hand ... grease everywhere, making the already hard to grip pump into an horror... the previous owner tough that greasing between the pump and the body will help him pump ... while it's only the spring inside that is hard.

[@hakont.4960]

Yup, I've warned people against Prowin hop-up units before. Whenever someone has severe feeding issues at the field, the gun will often have a Prowin unit installed.

[@johnp51d]

Why are they bad? I’ve got one in an HPA build for years and have had no issues. Is it a problem with a certain generation of them? Poor QC, etc?

[@hakont.4960]

@@johnp51d They just seem to be over represented in posts regarding feeding issues.

[@johnp51d]

Håkon T. I got ya. It must vary unit-to-unit then I guess.

[@hakont.4960]

@@johnp51d It's usually wise to just use the stock unit unless it's of really low quality.

[@johnp51d]

Håkon T. Yeah. I didn’t have a rotary hop in my stock rifle, so I upgraded to that. So far it’s run every hopup bucking and nub I’ve thrown at it pretty well (GG, Maple Leaf, Prommy, Modify, etc.)

[@53ns3i]

Should do a list on what upgrade parts are good and which are total sheit mate.

[@DavidBall717]

What's your experience been like with umbrella armoury r-hopped tight bore barrel and prowin hop-up unit drop in kits. Just installed mine in my gun tested it on game day wasn't even hopping 28g bb's like the was no hop at all 25m range Umbrella say there's a 5000 round break in period but surely it should at least work

[@NegativeAirsoftTech]

Never touched one... Why you'd want to install an over priced hop rubber patch that you can't use for 5000rounds is beyond me... KWC tell people that their BAX system needs 500 rounds to start working... but it doesn't. Just sounds like more fairy tales to me. I want a high speed motor, can you supply an over priced one that only gets fast after 10000 rounds? Sounds stupid, right? Edit: you also said Pro win hop unit... hahaha - you got DONE!

[@NegativeAirsoftTech]

I use maple leaf rubbers. They work instantly... but who wants that? Lmao

[@DavidBall717]

Well I at least seem to have an air seal FPS is about where I want it I'll put a couple of bottles through it and if that don't work I'm getting a refund it's been a cluster f@#* getting the dam thing to me had to wait 4 months because they sent me the wrong order and f'd me about for 3 months

[@DavidBall717]

I only recently started teching my own guns only been playing a year

[@opairsoft8100]

Negative Airsoft the funny thing is, UA r hop isn’t even a true r hop. It’s a unknown s hop like material. Reason I say this is because the patch will start to crack on the outside, which silicon tubing should not even come close to cracking in airsoft conditions

[@midwestairtech]

Do you use any adhesive on metal piston tooth racks? Why or why not?

[@sally2395]

This is the funniest thing I've seen in a long time

[@rybackairsoft3306]

I quite literally worked in a similar aeg in work last week

[@NegativeAirsoftTech]

First

[@Exoc3tBOOM]

So was the grease from the customer...or a previous owner?

[@saravind13]

kfc would like to know your location they be after that grease...

[@SuperBadAirsoft]

@Shrde215 i had a madbull when I first attempted teching and it was such a ball ache to get working, once I got it somewhat working it was such a downgrade compared to the stock g&g hop up that I got rid of it. BB's would dribble out of the barrel every other shot, the hop was all or nothing and the range and accuracy was worse than stock. In the end I just put a tightbore in the stock hop up and it out ranges some snipers now

[@kilodeltanegative]

@Shrde215 dunno about the madbull, but the prowin is so nitpicky about barrels, rubbers and nozzles that it's a pain in the butt. Not a bad chamber if you get it working right....IF.

[@lokii7910]

Cheater!^^

[@toriushauser7143]

How do you find out the correct nozzle length after an hpa conversion in a vfc m4? You probably wouldn't recommend hpa at all but I'm sure you know a lot about nozzle placement and the compatibility of different rubbers and HU's. I fiddled a lot with a maxx HU and different hop rubbers but haven't been satisfied yet. Probably because my F2's nozzle is considerably longer than the vfc's it seems..

[@NegativeAirsoftTech]

I don't touch hpa so can't help you bud :-(

[@achmadfarhanzuhayr8744]

I have agm stg44, it's have fcking lot of grease for internals. And you know its very hard to get away the gearbox from the hop up Chamber

[@Xarl-VIII]

These guns are worse than the time i cleaned an g36 with roach legs and parts in and around a gearbox

[@xcrazyghostx9566]

I bought a gun for around 30$ in Rust skins on discord and when I received it, it had 2 literal live cockroaches one on the charging handle and one of the pistol grip. It was aweful, very aweful. At the end I fixed the gun and it is completely insane how good it is. It is an ICS Bushmaster Carbon 15 10 years later and it is still a beast on the field.

[@maverick698869]

Negative Airsoft So what do you recommend for hop-bucking and nub for M-4 style guns?

[@guerrinlove69]

Maple leaf macaron bucking (they offer it with 50° through 90°) and also a Maple leaf nub. Just did that job on my Amoeba AM-009 last night and I will tell you it was a night and day difference. Love the results. If you are in the states, Airsoft Atlanta has them both stocked, couldn't find another retailer that had them both. Ran me 16 bucks total I think

[@airsoftersanonymous1903]

What do you think is the best hop up unit on the market?

[@slayer14304]

What's wrong with prowin? I ordered one to upgrade from the stock hop (not flathopped or anything)

[@hakont.4960]

Many people have feeding issues with them.

[@slayer14304]

@@hakont.4960 ah ok yhx

[@AbuGuroza]

@@hakont.4960 same question, mine working well in DBOYS CASV based unit, but when i tried it in my friend kingarms, using my ACM midcap on it, it jammed, unlike in mine (just trying inbar-chamber) the mags is mine and having zero problem in my unit tho

[@maxheber3506]

what to buy instead a prowin?

[@NegativeAirsoftTech]

10 minutes alone with a deaf stripper

[@Luezoid]

Maybe turn down the music a bit during the talking parts to make it easier to hear your beautiful criticism and then let the disk jockey blast during the speedy parts when u disassemble/reassemble. I think that would improve quality a lot and make your video even more enjoyable than they already are!

[@kewldude007]

whats the song on the second gun?

[@46templar]

Thank you for saving my day as i was bored and nothing to watch. And the guy out of poltergeist was creepy as fuck even now he still creeps me out

[@anthonyaprile4437]

I notice in your vids that when you shim you shim off the step gear and not bevel to pinion. Why is that? I do bevel to pinion and get good results, I usually have to sand the grip for proper motor alignment too. You should make a video about it!

[@PopeLeo]

@Negative Airsoft On GBB Pistols, do you want the loading nozzle to snap straight back or should it stay in the hop chamber for a short while when the slide racks back?

[@petereverett2354]

If the nozzle stays forwards it's a good indicator that you have a good seal between the nozzle and bucking (which is good) but too much and you have problems with it loading the next bb (but that's rare and if your having feeding issues it's more likely to be somthing else)

[@ryangoodyer9450]

Vids like this make me proud of British culture

[@locolama]

Poltergeist2 is such an underrated flick... that ol' guy was creepy af.

[@stevenjones458]

Man love your vids. Wish you work on guns from the states. Hard to find a quality tech who won’t charge an arm and leg for little to no work. Keep up the great vids

[@12scot-koreanlikeinskittle25]

This video is an insta-classic. Almost as good as the chicken that wanted the pudding upgrade

[@Ziigey]

Are MAXX Hop up units worth it in your eyes? If one could fit in my l85a2.....

[@NegativeAirsoftTech]

I matched one with a widebore barrel - it was amazing

[@Ziigey]

@@NegativeAirsoftTech So it will fit in my G&g l85a2 afv? :o (we met at Battle Lakes)

[@NegativeAirsoftTech]

@@Ziigey no idea...

[@Ziigey]

@@NegativeAirsoftTech Thats what the internet at large say as well. Think i may fire off an email to our Canadian friends.

[@dantardis9419]

@@Ziigey i did have a Maxx hop in my G&G L85a2 took it out for now since i don't think i had theright length nozzle cus the bb's just dropped out of the barrel but with the stock G&G hopup along with the Maxx nozzle it works just as good if not a little better in mine for me

[@southernwulf3335]

How much u normally charge to fix these guns. Got one that need it cuz it was given to me by my uncle who served in the US army and got the gun from Fort Brad. He got it from a barrel.....

[@leonardoatack]

maxx hop up is any good?

[@sally2395]

Good

[@abc121xyz]

hey, do you have an opinion on MAXX ME hopup units?

[@banana_ackchyual]

So just stick with the stock hop unit?

[@alienlobsteroo4882]

I love the found footage style

[@CalebTuckerAirsoft]

All your videos are amazing

[@paulemms11]

What in your opinion is a good hop up?

[@NegativeAirsoftTech]

zci, g&g, specna, Maxx, krytac...

[@Delta1292]

@@NegativeAirsoftTech when you use a Maxx hop unit which nub and / or hop arm do you use? I've heard people say to use the rhop arm and nub with a normal bucking (eg maple leaf) but never had the time to try it out

[@opairsoft8100]

Paul T also lonex is a good option

[@boom9950]

Yo i love your content bro, but i have one question tho... Im planning on buying a new barrel, hop up unit, bucking and nub. But you're saying prowin hop up is bad (i was planning on buying that) and im planning on buying a madbull black python barrol, a maple leaf bucking and im not sure on the nub. But what would you suggest? (I have a G&G SR15 AEG)

[@mikemayo4955]

Hey so for the warden mosfet is there anyway it can be programmed to have pre cock?

[@whiteandnerdyful]

whats your opinion on novrich guns?

[@dwon031]

Had the same issue with my STG 44 hop, but that was not the most haunted. I have had two rather haunted guns. A Cyma RPK and a S&t mg42. Both had some strange fps issues and been taken apart about 80 times, different nozzles hop rubber cylinders pistons. All different permutations. In the end a stock Cyma cylinder fixed the a RPK with a particular brand of hop rubber, while I gave up on the S&T mg42. The most expensive haunted AEG was my inokatsu M240b.

[@silasisaspicyboi7458]

I’m going to replace my whole hop unit for my STG44, it is pretty shabby hop sadly

[@Facewizard13]

I've always been told pro win and mad bull are really good hop units 🤔

[@drohung8042]

The commentary that we wanted but don't deserve

[@BotchedGod]

3:00 i about fucking lost it man great video 11/10 lmfao

[@Sandaco]

Plastic or cnc zci hop up?

[@mikemegadeth4110]

Which hop units would you prefer? My friend gave me his prowin and it's working fine for me for now but I'm sure there's a reason he GAVE it away lol

[@FrozenByFire3]

If it's working fine, keep it. The prowin is pretty damn good. This guy's hating on it for no reason. Any aftermarket hop up unit can have feeding or compression issues due to slight variations in tolerances in all sorts of guns.

[@mikemegadeth4110]

@@FrozenByFire3 thanks dawg that makes hella sense lol. I've had no issues with accuracy or compression since I've had it installed and for free? I'll take it all day hahah

[@FrozenByFire3]

@@mikemegadeth4110 exactly haha, and it's a block of metal that doesn't move it's not like it's gonna suddenly break or stop working lol.

[@setsuna200]

Ever since prowin stopped making their parts by hand the quality tanked. That is why I went with Prometheus. It is a great rotary hopup. Also their tight bore inner barrel. I have not had any jams or misfeeds and have always empty the mag with all bbs used.

[@NegativeAirsoftTech]

Maxx & zci all day long

[@opairsoft8100]

setsuna200 eh prommy is mostly overpriced stuff. If it works, cool, but for half the price, other brands will work just as good.

[@benppauwaert7174]

@@NegativeAirsoftTech first i must say i enjoy watching you work and how you do it. Just love it. But i also trying to learn out you comments. I have a Prowin in my Specna M4 and now i learned they are not so good so i looked up the Zci en the Maxx. The ZCI is made in plastic or cnc. What to you recommand out your experience?

[@setsuna200]

@@opairsoft8100 i got it for $25 so not bad at the time.

[@setsuna200]

@@NegativeAirsoftTech Damn straight. I switched to Maxx. I love being able to remember where I set the hop up settings thanks to the numbers. But I cannot believe I didn't know you replied to my comment for over a year. I am such a twat.

[@ramirez5385]

The new mash-up you've never expected! Paranormal investigation and Airsoft. "So an aeg has moving parts? That needs grease! involves rubber and plastics? np man *Loads whole tube of vaseline inside hop chamber, barrel and gearbox*"

[@ivanmonahhov2314]

Whats so bad about ProWin ? I had to install it in two guns : JG G36 and WE Katana ( that required a lot of filing ) . Both guns work fine.

[@JohnDoesSports]

I think you answered your own question.

[@NegativeAirsoftTech]

You saw the gun clogging ammo, right? It's because they leak air terrible & require mad amounts of tiny adjust or they don't feed. Fuck that noise.

[@ivanmonahhov2314]

@@JohnDoesSports required filing on the Katana , but that is a very special gun. ( Due to mine being a discounted early model )

[@Spollekop]

@@NegativeAirsoftTech I'm really curious what is a good hop up unit then?

[@opairsoft8100]

Ivan Monahhov they have horrible qc, are casted and not cnc, and have massive fitment variations

[@liam270784]

Hey Luke its Liam Clancy form the Mall. How've you been?just wanted to pick your brain,just bought a vfc mk18, wanna stop it locking in semi, replace the motor for a stronger one and pop a spectre mosfet in there.what would you recommend for trigger response and reliability and not fused about rof?

[@dagger1-140]

*looks at my KWA with MAXX hopup unit* thank god I picked you

[@michaelbailey3648]

snap, quality unit.

[@dagger1-140]

Michael Bailey new 2020 model too so no Midcap syndrome

[@TotaledTILI]

Man i need a friend like negative the techs in my area are sketchy at best.

[@AwareWolfOnWheels]

Fuck! I stood up and spilt me cuppa Earl Grey over when the intro started!

[@Vic13thRacing]

...well that's mildly depressing. I recently replaced the fucked hop unit in my M4 with a ZCI one. Fuck.

[@danielk9906]

The real horror is the upside down quadrails handguard...

[@floppymcdankus2905]

"I'll buy a pro win" XD basically the equivalent of "I'll slap a prommy purple in it"

[@lennethzvalkyire723]

Should of waited till october for your halloween video =P

[@Skambo_AxiosCustoms]

I love this channel!! 😂😂

[@steveshot81]

great video

[@louis7855]

Just curious why do you think the Prowin is bad

[@opairsoft8100]

Louis because they have no qc, aren’t truly cnc but casted like crap, and have massive fitment variations. Overhyped trash

[@TK7837]

Ok why are prowin hop units SHIT and what would you recommend 🤔

[@hakont.4960]

In most cases it's best to just keep the stock hop-up unit actually. It's the hop-up rubber that does the "magic".

[@Skilebougre]

Oof if the plastic got so soft it might be due to some suspicous non silicon grease

[@s3rgant]

"This gun is so haunted... "*presses the right arrow to scroll through the video* several instance of F-bombs and increasing rage. me:*giggles in sympathy*

[@Collectorfirearms]

It's a STG44.... Isn't it....I got one too. I would never let that happen to mine

[@Joe0898]

So what's the issue with prowin units, I've never had a problem

[@hdudecom]

Steals fucking earwax. Had me rolling!

[@OFLIN]

I want to see more... Gas Beretta's Would you deliver?

[@setsuna200]

I would send him to work on but the shipping would cost me a arm and a leg

[@adamcolville2057]

It was like a hammer house of horror film arggggghhhh!

[@seansamurai1981]

Ah heatshrink aka expensive PTFE tape. Ironically Ive had a madbul hop and Prowin and had no issue with either. I do know though they are both insanely fussy

[@urkthecaveman6665]

This guy is the gordon Ramsey of airsoft guns

[@jugofmilk41]

Sometimes I’m glad I went to gbb

[@jugofmilk41]

KR I use a ghk AK74m which I upgraded to hell and back it’s been a solid performer and I have yet to kill it in a major way I can’t fix

[@borisf711]

So the second gun is a kid watching and buying the amped airsoft stuff and attempt to rhop his stuff

[@Prestige_GB]

How can I send something to yourself. Do you own a shop or something?

[@helloguy1050]

Stop it! I can’t take no more 😭😭

[@Micromation]

I don’t know what’s worse... the AEG or the VERTICAL recording 😱

[@ricoone9823]

Ear wax ghost fucking love it lol

[@mzjango]

Omg thank you for stating that the madbull hop unit is worst hop unit ever... literally the wrong size, the nozzle port is too short (or tall.. i dunno) nozzle scrapes through that thing resulting in either a broken nozzle or 100 fps... WHY... what gun was this hop unit made for, cos it doesn't work in a CA M15 and it doesn't work in a dboys.. both pretty standard dimension receivers.

[@lauranceberiya1314]

You must have ran into a counterfeit prowin... Damn, that mc'spunk has almost made me puke lol

[@NegativeAirsoftTech]

Nope, it's a Prowin. They're the shittest

[@opairsoft8100]

Laurance Beriya prowins are trash...have experienced only 5 of them and all but one would actually work straight out of the box. The variations on them where absolutely incredible

[@lauranceberiya1314]

@@opairsoft8100 well, yes, this is exactly the issue with counterfeits - terrible tolerances. AFAIK real prowin have stoped producing their units several years ago and did only small batches ever since and in the same time other chinese companies have started to replicate them due to popularity. There is a way to tell if a unit is real prowin though - most of replicas have a 1mm hole on the bottom next to the tube that goes into the magazine

[@opairsoft8100]

Laurance Beriya do you have any source on this? Because I have never heard of this, and I highly doubt prowins would stop production on their most popular item

[@lauranceberiya1314]

@@opairsoft8100 yes, but it is in russian. I believe the safest way to get a real prowin is to buy it from reliable source like airsoftpro cz or to get maxx from their official website instead

[@Ultra-Collector]

Looks like petroleum! That’s a no no! Why? Vaseline/petroleum melts then splatters everywhere with any heat what so ever! Then you have all sorts of damage! I learned that the hard way on my Tamiya RC Grass hopper/Preying Mantis when i was 9! I’ve never had luck with those blue Pro Win hops!

[@xBiotacticsx]

this gave me a much needed laugh today

[@samh___]

When put together well pro wins can be pretty good imo. But when done wrong. Another story

[@deadleadpanda1311]

Can't wait for noise complaints for laughing too loud. Fuck me man. Too funny.

[@Feels_Lucky]

Wait till you get to mine. Cursed.

[@YaBoiTheUnicorn]

Jesus, that is FOOKED, and I've seen many a fucked gun in my tech days

[@bennyling5601]

You literally sound my mate its fucking insane

[@Airfonssoftballs]

I actually fucking love this guy 😂

[@advanceddarkness3]

Vigo the Carpathian: Has entered the chat.

[@NefariousElasticity]

You get some bizarre fucking cases, man.

[@huckerfeller3277]

Time to use that grease for cooking, yum!

[@scorpionleader424]

Love it!

[@andyg1180]

Does he own a chip shop by any chance ? Grease applied with a catapult, surprised the fugly red arcturus never made an appearance 😇😷

[@ribsrtuil3615]

christ that was a fun watch.

[@lokii7910]

Im no tech, but fkn hell where did all that grease came from? I guess Slimer had a wet dream while sleeping inside that gearbox... And 4 gods sake and "EAGLEWINGS" why u dare to touch the prowin (any S-AEG + 1000m) hop up godlike autopilot?^^ Love ya pal...

[@avalt0134]

i get 500ft with my rhop patch, lasers, you didnt install it properly

[@mikemegadeth4110]

Negative didn't install nothing improperly, the before tech had done a shit job

[@CallsignBashie]

LOL. I doubt it. Post a video, or it didn't happen. You're just talking out your ass.

[@Sandaco]

A joke people?

[@avalt0134]

@@Sandaco lul leave them, they dont know any better

[@BjornHub24601]

poor little rifle

[@BjornHub24601]

slippery like a slug

[@PartNinja]

Curious what your specific issues are with the prowin chamber? Or link to the video where you talk about it? It's obviously not compatible (alignment) with every gun out there but I haven't had any issues with the few I have (all flat hops but nothing special otherwise which work nicely for me. I also agree R hops are dumb). Which chambers do you suggest? Not saying you're wrong at all and everyone has different experiences obviously. Just honestly curious about the details of your opinion/experience.

[@cy-one]

That gun was assembled by following the principle of "if it moves, grease it" recursively.