The New 19X MOS. The Complete Package.

[@gymreaper1728]

Original 19x has steel night sights not plastic buddy.

[@Thenypimp]

Bro he just disrespected ur pole u gotta pop him

[@PointWithin]

This actually is a good deal. I was looking for a duty gun to replace my gen 5 19 and I could swap the slide with my carry 19 plus a threaded barrel? This may be the winner for me

[@b.c.731]

Very cool. I like it. Even though its a little late but still cool.

[@Joe-oo3xv]

My two favorites are the 43xmos and the 45mos. Those two cover it all

[@williamcattr267]

I had to get one! And it happened to be on sale for $629last month. Great feel to it, too.

[@fischerm4639]

Why wasn't this the submission for the MHS? This should've been the original 19x hands down.

[@vinnier6]

Because the regular military isn’t using a threaded barrel and ridiculously high sights…or a red dot sight

[@MDZac2024]

I’ve got a Gen 5 G19 MOS with an RMR on it. I also have a G19X (non-MOS) which I love. Because they’re both Gen 5 Glock 19s, and interchangeable slides etc. I’m happy with both and both serve different roles, but can also easily overlap which I like. I may send the G19X slide off to be cut for an optic, but in no rush given the flexibility I currently have.

[@billymatherson3602]

This isn’t from Glock it’s not on there website. It’s a Davidson exclusive

[@ploxplox1109]

i wonder if that barrel will fit my glock 19x i just want to buy the barrel

[@Chr8me]

It will

[@FlyTour69]

Will the 19X MOS mags fit my 19X?

[@Chr8me]

@@FlyTour69 BRO THEY THE SAME DAMN THING😂

[@edgarangulo9121]

I have a question !!! Can you still be able to use the Glock even if you take that front little piece off ? I like it but that front piece on the top ruins it :/

[@ltroastabotch761]

You can. But you run the risk of damaging the threads, which would make fitting your suppressor difficult if that were to happen.

[@mike34744]

The Holosun SCS is a direct fit, but it sits a little low with the suppressor height sites.

[@MillerDanis]

How can I purchase for that Item I like it I'm from the Philippines

[@rickyramirez3483]

I rather buy a Glock 45 just because of that lip in front of the handle that doesn’t let other mags go in…I like the high metal sights and thr barrel

[@Patrick-k9q]

A few seconds with a Dremel would take care of that, but it's only the Gen 5 mag base plates that hang up on that. Anything pre-Gen 5 or Gen 5 mags with earlier base plates are fine.

[@gmadgengarage]

This is such an after thought type of modification on Glocks part. Had Glock did the mos cut and threaded barrel during the military trials they probably would have won.

[@insanity4082]

No they wouldn't have, they did not make the FCU modular.

[@IROD808]

I’m actually going to review it myself here shortly.. I know it’s not much of an update to it !

[@cbcastillo5681]

One 17round mag two extended mags

[@robinperronjones5024]

It has two 19 rounds and one 17 round mags.

[@zawminhtike3384]

May I know the price please?

[@YungBeezer]

I should have shipped from the get go MOS cut.

[@dariuskincaid]

Glock is playing in our faces lol

[@playboylifestyle7599]

I don’t like the sight in the front

[@lyndonlonzanida]

Glock should have added the front serrated edges.

[@DamionJR4923]

Why no front sight serrations?

[@4EverrBroke]

You guys got any in stock?

[@spartanarms571]

Yes we do!

[@DanielSoto-wk9yj]

1 17 2 19 mags

[@Joe-oo3xv]

All the guns should have those sights

[@maccwoodt.v.4203]

Does it come with threaded barrel in store or it’s separate

[@robertpowell8140]

Mine came with the threaded barrel from the gun store

[@coletrick8748]

No front serrations..

[@cbg482]

Who cares​@@coletrick8748

[@cbg482]

Tf does it look like 😂

[@norrisdillahuntjr4570]

I have a 45 mos with a threaded barrel

[@jeffroman2352]

Wonder if you can just buy the upper

[@PointWithin]

On eBay you can

[@isaacwillis6042]

It’s not three 17s it’s one 17 and two 19 round mags.

[@ltroastabotch761]

Three 17s two with + 2 mag extensions lol

[@westpalmdoc]

believe theyre Ameriglo sights…

[@Joe-oo3xv]

This will be a contender against the 45 mos. I wouldn’t have bought the old one. Maybe this one.

[@wokeamerica1661]

That's not 3 x 17 round magazines bro.

[@earldelsanto]

Dont what that. Dont like the black plate on brown slide. Next whats the point of the extra barrel length? Just get a g17 and do this to it. And 3rd. O man what happened to the 2 19 round mags that comes with the stock g19 x.

[@Rdctd6969]

1. This point is irrelevant and stupid. You should feel bad. 2. Extra barrel length gives extra velocity, (and arguably accuracy) which makes bullet do more dmg, with less felt recoil due to less reciprocal mass moving in the slide due to less material and weight in said slide when compared to g17 ect. So again, you should feel bad. 3. This version of g19x still comes with 2,19rd mags and 1 flushfit 17rd mag. So again, feel bad. The only impressive thing about your comment is how confidently, and condescendingly you were able to be completely and utterly wrong about literally everything you said.

[@vinnier6]

You opened the box upside down

[@annley]

Should have removed that lip at the bottom so gen 5 mags would fit as well

[@Rubeless]

It’s there for a reason

[@LFOXER01]

@@Rubelesswhy

[@vinnier6]

Gen 5 mag baseplates are retarded

[@Demonslayer079]

I'm pissed chicago don't allow to buy firearms with threaded barrels🤬😢

[@KYSBN418]

im not surprised they dont with all the senseless shootings that happen there i cant imagine what itd be like if people were running around with suppressors

[@ricktilbury9690]

I want one; I want one; I want one.

[@samwarner7820]

100$? For a mill, barrel, and raised iron sights. Sounds really cheap

[@jameskaminski6574]

this is just beating a dead horse at this point.

[@dadrionrichardson530]

So funny to me how Glock adds a feature that other companies have had available for years and call it a “new pistol”. 😂😂😂 I understand that glocks “just works” but don’t give me a feature that should’ve been standard and call it “new!”

[@Bakercakes77]

I don’t think they’re calling it a “new” pistol… still a 19x, just with some minor updates.

[@rotteneggs29]

Why are there reviews for Glock still?

[@user-bc1kp1sl2e]

Looks pretty ugly lol shouldve painted the mos cover to match the gun

[@louiskindle2814]

Good thing an optic goes there…

[@JavierGonzalez-te8sz]

Never knew a fire arm had to look good to function well. Hmm?

[@user-bc1kp1sl2e]

You guys are a bunch of dummies. Never knew all guns that functioned well had to look like crap

[@user-bc1kp1sl2e]

@@JavierGonzalez-te8sz yall are a bunch of dummies. Didn't know all guns that functioned well had to look like crap. Hmm???

[@user-bc1kp1sl2e]

@@louiskindle2814 nooo dummy you take off the MOS cover before putting the optic on 🤣🤣

[@ixibladeixi2639]

Looks diarrhea brown. Lucky it's still a Glock. I'll get the FN 509 CC Edge first, regardless of the price range because I can. Nice video tho.

[@Jimbob48863]

The threaded barrel sucks. It’s not practical for carry.

[@Rubeless]

They didn’t make this for actual shooters, it’s for geeks that shoot a couple times per year and think they are James Bond.

[@FlyTour69]

Ever heard of suppressors?

[@KYSBN418]

you must not use muzzle brakes lol

[@buddysumner4022]

Hey everyone look at this new high technology just released buy glock, it’s ground breaking it’s got a optic cut, wow 🤣🤣🤣😂 what a hideous trud of a gun