The New Guy

[@JimmyMakingitwork]

42 seconds in, me: Geezus I hope this pretty box is full of tools and not only using a few draws?

[@wendellgreenidge3362]

It’s crazy when you have a box that cost more than the tools it holds and then has sooooooo much space left

[@ehud87]

Sad to see more money spent on a pretty storage box than the tools that actually make the money

[@primofx2sport]

Damn new guy for sure!!! Gotta get this guy to get on them tools before a 10k box lol. I have the same box. Very impressive!

[@AutoTechHec]

I like tours. Gives me ideas on what tools to add to my arsenal

[@Wicked_4355]

EmmCee Dee that’s what I’m doing right now, watching tours to be like oh that’s what I’m missing, lol I’ve got a bunch of stuff but always forget what I actually need when I get to a store.

[@johngrindel6822]

Just remember ... if you have to borrow a tool twice, you need to buy one. Another cool video. Glad I found your channel.

[@bobhenry8262]

That's the prettiest hoc color combo I've seen!

[@kalebloomis8906]

10/10 stopped the video to like and comment because I saw the Pibb extra can on that box and that alone deserves a like.

[@JRC54]

Dr pepper knock off😉👍

[@Toyotas_n__Tools]

@@JRC54 dude pibb has a much better taste then dr pepper, dr pepper taste cheap compared to pibb lol

[@flatratemaster]

That is a Sweet box from Cornwell, they are really stepping up on boxes

[@BigDog50001]

Very nice box and tour.

[@asmautollc]

That Cornwell box is gorgeous.

[@BuiltOverBot]

I am impressed with the box looks nicer then any snap on box I have seen

[@greggcrittermuse6347]

Hello JRC54, I Just finished watching the new guys toolbox inventory. Wow! Very nice toolbox & a nice start to a nice collection of tools. Nicely organized too. Thanks for sharing the new guys toolbox inventory with us! Gregg (Critter)Muse

[@JRC54]

Thanks for stopping in Critter👍

[@Kona5.0]

I have this same box. Absolutely love it!!

[@RipRoaringGarage]

Most of these toolbox tours make me feel so inadequate.... I dont feel so bad now with my 30 plus year tools! Welcome to the new guy, that by now...probably stacked and packed than Cornwell.

[@J-ThomasRST]

What makes the Cornwell nice are the latches, keyless entry and drawer liners, nobody comes close to the feel of the latches though.

[@Westboundandown]

I had the exact same box, loved the color. Traded it in for a box with canopy

[@18winsagin]

Top shelf Box in my opinion, hadn't seen the Cornwell man since about 83 84 when I worked for a Highway construction company in the Equipment and Truck shop, things have come a long way since then as far as the Ratchets and specialty tools, nice set.

[@PaulysAuto]

That Bluepoint torque kit is on point, I have one of them, best investment. Very nice box man! Glad to see you got a tech to help finally JRC54!!! Best of luck to you hope business is booming!!!

[@misconceptionindustries2968]

Just picked one up like that same box but lime green and a step down no power drawer or electric locks but same box I love it!!! I

[@XxVisualx]

Y’all in Georgia my corn well guy just sold one just like it this week he has had on the truck for awhile great looking box well made as well

[@ansemswrath2485]

I have a black platinum and I love it. Where are the rest of his tools tho? He could have been fine with a pro series for half the money and still not have it full.

[@lovetolearn5253]

I thought the same thing, buy a us general 56 fill that up then get a nicer box. I love his box but that could of fit in a big roll cart.

[@mgtowlegion652]

Wow I think that box is the best I have seen yet.when you think of boxes you think snapon or Matco but wow I love that box

[@xj31]

Nice looking box, hope we get another look when you fill it up some

[@JustinDowDIYcentralhighway]

Beautiful Box. Interesting really. Some guys just starting out find a nice in between (40-56”) for the first major Tool Box upgrade. It’s interesting that he jumped right to the Big Dog. I gotta Tell you that Platinum really Pops! Thanks for sharing your set up. 🍻👍

[@JRC54]

He said he had a master series snap on with work center that he dropped unloading it off a tow truck.🤯 Cornwell took the damaged box on trade if he got this one, gave him a fair trade in price too .

[@JustinDowDIYcentralhighway]

Nice!!

[@travis_b_]

I've been eyeing that box since I first saw it. I want it

[@vinny2883]

Beautiful box, congratulations!!!!

[@ClientGraphics]

That’s a sweet looking box. The top drawer with dual slides looks like it will hold up like a beast. Thanks for the tour.

[@nonya1588]

Its a great box! I've got one, but with the new drawer configuration.

[@AntonioClaudioMichael]

That box is gorgeous

[@Supra_Mickey]

I like that they have the key pad lock. I’m looking at the tool vault elite either the 72 or 84

[@prevost8686]

The Platinum Boxes are absolute tanks. If I had a stable Cornwell guy I’d step up and sign in. It’s the only boxes that would tempt me away from my 6S boxes. I love that color combo as well.

[@wayneh3021]

Sweet trim color... Thanks for sharing 👍👍

[@AntonioClaudioMichael]

Nice cornwell box brother gorgeous

[@ghostwrench2292]

Beautiful box!

[@RAGE_Snail]

That's a nice box. I like the color scheme. My matco 5s 3 bay weighed 1100 lbs empty. Probably one of the smaller 3 bays also

[@banjomcswamp8275]

The drawer layout on that thing is NICE

[@chrismargarum6863]

Who make the joint puller at 8:14, I like how you can hammer it, or use the air hammer... I need that in my box.

[@noremist8733]

@@smzx11rage sunex 9834

[@doctordiesel5467]

Lisle makes a really nice set and their usa made and have the steps aswell they are the original design of that type of pickle fork tool sunex like every other Asia tool company just copies someone else and sell it for less and kill usa companies with copied under quality tools

[@racerxnk]

Hope this guy works out, seems like a good guy who is investing in his trade.

[@phillipsmith9572]

I have all of those tools in my top drawer. You have plenty of room for growth. Looks nice.

[@williamdeaton1218]

Nice hub master set. I have the same one.

[@codysautodiagnosticsprogra8706]

That keyless pad looks pretty sweet. I like that idea Incase losing your keys or leaving them at home, you always have access

[@JRC54]

Yeah plus you can easily change the code if you want too.

[@ericswann3128]

Yeap nothing like driving a different vehicle to work one day just to instantly realize you don't have your key!

[@doctordiesel5467]

Cornwell makes some really great products there new revamped fine tooth ratchets coming out will be sweet got to test one very nice

[@stevenjones1824]

Very impressive box from cornweel, I love the branding on the mats. But my epic is smooth!!

[@RustbeltMechanic]

Nice man!! Welcome to the family Steve🤘🏻

[@whocares6283]

Tool heaven

[@doogeerugged89]

almost everything i have is kept in cases. My snap-on master series fits what i got wonderfully in the last 2 drawers. Idk if cornwell had the space... MAYBE roughly 8 min tall?

[@phillipchambers8487]

Super Nice Box!

[@T6Tarek]

That blue point bit kits runs 349 on the truck. It's a great little set

[@JRC54]

He may have got it on promo

[@T6Tarek]

I don't think it's a bad price even at 350, it's a 87 piece kit full warranty just like the snappy stuff,I was buying a couple new hex kits and my dealer was like hey for less money I can get you into a 87 piece blue point kit.. yeah I'll take it

[@alans.4167]

Beautiful box. It was a smart move for Cornwell to buy out Kennedy. To me it looks like the newer Cornwell boxers are made better compared to when they just contracted out to Kennedy and Waterloo.

[@JRC54]

The box looks very well built.

[@AntonioClaudioMichael]

Nice toolbox tour also

[@JamalDavis25]

I am a *NEW GUY* to this channel

[@BDauto86]

I dig it too, sharp looking box. I just brought a new guy on with me too. Hope you guys do well together.

[@schmidty7654]

Those Cornwell double flexes have saved me a shit ton of times. They are $375 off the truck.

[@meanoldman2000]

Wish we had Cornwell in Canada, gorgeous box !

[@js4887]

Very cool boxes thx for sharing

[@AntonioClaudioMichael]

Nice pickup steve

[@garyrobinson5719]

That thing is beautiful... And it's nice and big too .. good luck

[@wdbland0820]

Beautiful box

[@airratchet7313]

I have that spindle block kit for my press, it works a treat with Honda spindles. Then I got the otc hub grappler

[@doctordiesel5467]

I have the hub grappler elite and the sir hub master the sir tool one I like better

[@biggiefitz6275]

Cool box with cool color combo and a cool video!

[@wendellgreenidge3362]

Nice box!!!!!! Love all that space but I am hating on your snap on box lol that thing looks good

[@ChevyConQueso]

I have a buddy who is a Matco fan, and he dislikes Cornwell pretty strongly. Everything I see here says this is in the same class as Snap-on and Matco. It is certainly nicer than my Snap-on Classic 10 drawer (3 full width drawers). I absolutely love the Cornwell drawer opening mechanism compared to the one on my box; mine just feels cheap and rides across the paint to latch when it closes. It's plastic so won't do much, but you can see the marks after a while. Snap-on really missed the mark there... but I got this box 2.5 years old in excellent shape for 30% of new price, so I can't complain too much.

[@BlindBatG34]

That is a beautiful box. Cheers!

[@That_one-guy192]

A discussion about tool box drawers is the only time it’s okay to discuss another mans girth.

[@JRC54]

Haha

[@bobbygarrett9588]

Sweet Box!

[@vegasdavetv]

nice box, very nice

[@guyconnell2250]

Wow. You could play baseball in that socket drawer.

[@joshlawrence4512]

That's a lot of toolbox to have when ya don't have a lot of tools yet.... that's an awesome box though and he's spending smart money on the tools he has. Nice tools so far. That trans fill kit might be next on my shopping list. I really like that one.

[@JRC54]

I had to order that trans fill kit my self.

[@CopCat34]

Wow. Great looking box!!!

[@Andrew_Venn]

Damn that's a big ass box

[@terrellscaife2411]

One day, I will be able to afford one of these

[@cptdavidwebb]

That's a nice box

[@moonmessiah9368]

Westling socket holders are nice. solid aluminum blocks $100 for the bundle

[@samsonian]

Kobalt sells socket holders that are similar to those for a decent price.

[@chrismargarum6863]

The blue point torque set ran me $370 on the snapon truck, love the set..💯✊

[@JRC54]

Figured it was more.

[@user-dn6qy1ou1f]

You guys have a part number for that set. That's exactly what I've been looking for

[@timpope9384]

M H BLPTHC87

[@danohstoolbox]

great looking box loads of room to grow

[@subietech1.6]

Nice set up

[@jakejerdee8716]

Got a platinum box for jr tech tools..... maybe put that stuff in a roll cart and do a tour with a full box....

[@AntonioClaudioMichael]

I have them socket trays they work well

[@BobSmith-uw8fl]

How is he liking the box a year later? Beautiful box, it's a shame Cornwell boxes don't have the greatest resale value.

[@scarface97626]

where did you buy the tray to hold the socket

[@jtbowden97]

Hey JRC I got the Split top roll cart that sits same height as that box but 26 deep and about to do a updated Tool Box Tour at home since I am in oil fields now

[@JRC54]

I make sure to check out the updated video after you post.👍

[@johngibson3594]

Very nice stuff the box is nice like to see it with a hutch and a side locker. He has got plenty of room in that box. Thanks for sharing this with us

[@CravinMorehead420]

Nice looking box

[@carlosbarbosa7488]

Could y’all do a video on how to rest the code cause I have the 76 pro series box am trouble setting a new code to lock and unlocking the box

[@stefanczechorskidds5536]

very , very nice !!!

[@OmgItsCAndT]

Beautiful box bud

[@semaphro1]

Can I get the brand and part number for the ball joint kit please

[@toptech7918]

That C frame looks just like the snapon ball joint press C frame and it’s a great tool! Best ball joint press on the market imo

[@doctordiesel5467]

Snapon press is snapon made and the best press I have used so far I have Otc and that Mueller kueps and I have t Used the new matco outside ball joint press which is outside the fender well that is a good unit aswell

[@mattphillips4260]

please look in to the wrench extender i would really like to get one and some how do the money for one some how you pick how to do it

[@martinschaffmeir7729]

Hey good luck with the new guy

[@micbic008]

13.40 - Thats a Butchers Beef boning hock hold hold that in your left hand while you bone out beef with your right knife hand

[@OldeCarrGuy]

I’m not sure I’d pass the JRC toolbox tour test!

[@christimm2113]

Beautiful box, good luck with it, BTW, where are the socket racks from?, I’ve been looking for something like that Thanks

[@Andrew_Venn]

Mechanics time saver makes it for most of them.

[@kickazz9473]

Ive seen similar ones on amazon though their probably not same quality

[@dr.lmsb4456]

Great box steve . Great video jrc. #smallenginenation #keepwrenchin

[@dylankinch2735]

That ball joint / bushing press is sick. Where did that come from. Ive seen a few tools online from that company. I was looking at some special files they make for calipers but i never pulled the trigger cause i just sandblast them. But that press tool is great looking tool. The c clamp oart is a monster

[@JRC54]

I believe he got it from Cornwell pn 609 400/460 Mueller kueps

[@dylankinch2735]

Yea i found it online. Pretty expensive but what quality tool isnt expensive right bud.

[@doctordiesel5467]

The brake caliper files are a game changer another tool that will change your life from Mueller is the carbide scrapers awesome and Lisle also makes a sweet carbine scraper set

[@doctordiesel5467]

Mayhew makes that inner tie rod tool

[@kevkamo6289]

Ive literally never even seen a cornwell truck... southeastern pa

[@OmgItsCAndT]

Jrc 54,I like Cornwell tools,koon trucking lost their Cornwell truck, would like to see Cornwell tool truck tours like koon trucking done,see what on sale and such,if you have time,I'm sure your busy,God bless y'all,thanks

[@JRC54]

I'll can ask the Cornwell guys. He is a cool guy. Hope he not camera shy.

[@OmgItsCAndT]

@@JRC54 definitely,I appreciate it bud, I ordered tools off of joe when koon trucking was doing it

[@picklepee2771]

Gotta admit, this trade allows.us to buy as many toys as we want. Nice!