THE NEW NR200 ENGINE OVERVIEW

[@RCTanksTrucks247]

Nice brother!! Looks awesome. Mine is in the mail as we speak.

[@dennisdempseyradiooutofcontrol]

Cool beans brother! looking forward to your video, hey the threads on the clutch pilot shaft is bigger than the 6mm shafts that sterlingkit sells for the toyan engines I found out tonight lol, I will have to contact them to see if they have one for it.

[@cbrc4216]

I love how the idler pulley is adjustable. That way you get the most out of your belts.

[@dennisdempseyradiooutofcontrol]

Yeah I like that they added more serviceable features to this engine.

[@rcOhio]

Very nice looking little engine Dennis. I can’t wait to see your v8 project! Thanks for sharing the instruction pamphlet.. I can really appreciate some good Chenglish!

[@dennisdempseyradiooutofcontrol]

Thanks 👍 as soon as the V8 parts show up I will upload a video on it, im still laughing about that instruction pamphlet lol!

[@rexrcs]

Engine looks sweet, thanks for sharing! I’ll be getting one of these in the future as they improve! Thanks for testing them for us!

[@dennisdempseyradiooutofcontrol]

Cool to hear your going to get one, I will have more update videos on it soon 👍

[@Stirlingkit]

Dennis, i;m glad that you like this nr200 engine. love your video.

[@dennisdempseyradiooutofcontrol]

Thanks my friend!

[@been9ne991]

Nice. Ready to see it at work

[@dennisdempseyradiooutofcontrol]

You and me both!

[@jamesmagmer8929]

Geez man.... I'm into super scale rc trucks.... with electric motors. You keep posting stuff I need to install in my 20 pound rc trucks! Love your informative vids! Even with a steel flywheel, what kind of tourqe can they produce?

[@jamesmagmer8929]

Produce at a slow scale speed I should have said

[@dennisdempseyradiooutofcontrol]

As far as the torque johnnyq90 was building a dyno to test these engines, they are rated around 1.2 pz (hp) they have good torque because they are 4 strokes. I have plans on doing more scale trucks in the future 👍

[@enginediy]

Nice video,my friend.

[@dennisdempseyradiooutofcontrol]

Thanks my friend!

[@arnoldfarrugia6764]

The warranty is 120 days my friend. I've seen it in the description of the same item on eBay

[@jhawk1985]

Sup Denny. Glad to see the new engine buddy 👍

[@dennisdempseyradiooutofcontrol]

Hey brother how have you been? cant wait to stuff this engine in something, lol

[@makepartsUSA]

good stuff Dennis may as well be direct and ask them about the 18k vs. 20k rpm limit also. any updates re: the L400 yet?

[@dennisdempseyradiooutofcontrol]

Thanks! yeah I am going to ask about the rpm and warranties, I found out the clutch pilot shaft is bigger than the standard 6mm, might be 1/4 28 thread I will investigate it for everyone. also I haven't heard anything on my L400 yet.

[@nsvaluto48328]

Dennis I love this Engine, but it's sold as completely built I want to do a 2 cylinder but I I want to assemble it not it come that way any suggestions to get what I want?

[@713Ace529]

Probably gonna need a good size tank of H2O. seems to get super hot in the videos. I like the thicker belt. The head gasket is better. When I opened my L200 I found the gasket to be thin as a 12oz aluminum soda that it seemed to leak oil into the aluminum where it was cut or shaved off. Would be cool to print the wall poster size manual into a table cloth cover. LOL 😂 Thanks for sharing.

[@dennisdempseyradiooutofcontrol]

I agree these looked like they run hot at open throttle, overall it looks to be better than the L200 engines, time will tell when I get it stuffed in a project and run it lol!

[@rtalbot87]

Hello again Dennis. Nice to see you again. You ask for concerns ? My only observation is that the starter motor housing seems awful close to the exhaust manifold ! I think the starter may get cooked. Sorry to be so sceptical (or cynical) but I wonder if that is why the head gasket is so thick ! Can't wait to hear it run. Also looking forward to your comparison with the Toyan L200.

[@dennisdempseyradiooutofcontrol]

Hey how are things going? I noticed the close proximity to the starter also, guess I will make a alloy shield for the starter before I run it. The thicker head gasket is a good thing in my opinion, I believe that the L400 cranks are breaking because of the non existent compression height and no center support, I will have more updates on them soon.👍

[@rtalbot87]

@@dennisdempseyradiooutofcontrol I agree, a thicker head gasket is desirable, not only does it lower compression, it also provides a better seal, but.........

[@rtalbot87]

Hi Dennis, I just found a first report on a NR200 engine failure. It's on youtube. Big end let go; insufficient torque. You may want to check yours. Do the conrod bolts use tab washers to prevent bolts and nuts loosening ?

[@dennisdempseyradiooutofcontrol]

Yeah I seen that, im going to check mine, the con bolts just use loctite there isn't enough room for a lock tab maybe a drilled safety wire after they are torqued down might work.

[@NEOBRUNOX35]

I like it, but one thing i think is wrong is the exhaust too close to the electric motor

[@rtalbot87]

I agree. Fried starter !

[@arnoldfarrugia6764]

Hi my friend can you please tell me if the pack comes with ignition system rediater and fuel tank. I'm getting one. Thank you so much. Enjoy your hobby.

[@dennisdempseyradiooutofcontrol]

they sell the starter kit separately unfortunately,

[@arnoldfarrugia6764]

@@dennisdempseyradiooutofcontrol thank you so much my friend

[@Nico-ds9nz]

Its nonstop nuting November!

[@dennisdempseyradiooutofcontrol]

LOL!!! 👍👍👍

[@floridamangonwild]

to the one person that dislikes such a wonderful video why?

[@dennisdempseyradiooutofcontrol]

I agree lol!

[@zach8204]

Maybe exhaust is that way for turbo?

[@dennisdempseyradiooutofcontrol]

I thought about that also 👍

[@conanruisi]

Hey double d have you been hitting that devils lettuce? I use it for my insomnia just curious if it’s medical or recreational for you

[@dennisdempseyradiooutofcontrol]

I layed off the lettuce for a while, I couldn't get motivated to finish my projects lol, up here its mostly recreational getting a med card is difficult.

[@conanruisi]

@@dennisdempseyradiooutofcontrol I hear you. I don’t have a med card but I mostly just use it to go to sleep 👍🏻 I tried growing some not too long ago I did it outside wasn’t very hard at all.

[@juusifr]

where did you buy it i just had my birthday and i hope i have enough money for this

[@dennisdempseyradiooutofcontrol]

I bought mine at enginediy.com Hey Happy Birthday bro!

[@juusifr]

@@dennisdempseyradiooutofcontrol Thanks

[@Tywild327]

what happened to the 69 camaro?

[@dennisdempseyradiooutofcontrol]

Im still waiting for parts to show up, the mail is killing me lately lol.

[@gunawanfahri]

It looks like a legit dohc , is it ?

[@dennisdempseyradiooutofcontrol]

Nah its only a single cam,

[@hobbiesemgeralcarlos6542]

Show esse motor

[@crutch958]

10:16 looks like a crack in the manifold

[@dennisdempseyradiooutofcontrol]

I checked that out and its a milling mark in the flange, 👍

[@specops420]

Will Toyan FS-100g work in HSP 2 speed?

[@dennisdempseyradiooutofcontrol]

Yes it will work with the hsp 2 speed, you have to back out the second gear adjustment to shift earlier because of the lower rpm's the engine puts out.

[@specops420]

@@dennisdempseyradiooutofcontrol Im on the fence about buying HSP 94122 nitro chassis and a Toyan FS-100G Do you know if it will just bolt right in without mods and what about top speed would it get? Ive always wanted a nitro car years ago now brushless electric is king and nitro fuel is expensive but i have an electric buggy basher and want my on-road to be more of a tuner would be really nice to be able to use gasoline out the pump right across the street besides toxic expensive nitro fuel the Toyan FS-100g in the 2 speed HSP will do 30+ mph at least i was hoping

[@dennisdempseyradiooutofcontrol]

@@specops420 The Toyan FS-100 will need to be fitted to the chassis so some alterations will have to be made, if you use a large gear clutch bell and a 3 shoe clutch is a must to get most of the torque to the drivetrain, the Toyan 4 strokes have half the rpm of a 2 stroke but way more low end torque.

[@earlyculyer4103]

CISON FG-VT9 9cc V-twin V2 Engine Four-stroke Air-cooled Motorcycle RC Gasoline Engine have you seen this one?

[@dennisdempseyradiooutofcontrol]

Yeah and that is a really cool engine! I have to get one soon to check out 👍👍

[@joffreygia]

😍😍😍😍😍😍💪💪💪💪💪❤❤❤❤❤❤

[@dennisdempseyradiooutofcontrol]

Thanks my friend!! 👍👍👍👍👍👍

[@engineerpauly7480]

Bty its "ozzy" not "ossy"

[@dennisdempseyradiooutofcontrol]

I was talking about my Aussie V8, made in Australia, guess I pronounced it wrong, Im a true Ozzy fan also lol!

[@jamesdelk8926]

It's becoming now those model engines will have cb performance to double stock boxer engines slowly replacing them now it started with school noses trucks of real things now pickup trucks slowly becoming it now with stroker combination in one drivable real ones minibikes now but still pull cords motor cycles like BM Es and others next except dirt bikes bit yes people building boxer engines souped up for models sound like it too demolition derby school buses now have it like police cars use demolition derby engines yes now name changing in models you get will get super boxers sound like it too

[@engineerpauly7480]

1.2 ps (hp) yeah right 🤣 More like 0.12 ps I wish they would stop making these false power claims! A 30cc 2 stroke has about 1 hp so these tiny engines obviously don't have anywhere near 1.2 ps (hp)

[@dennisdempseyradiooutofcontrol]

lol! 👍