Thank you for helping me understand how this method works!
@Dipankar-jd7ye4 жыл бұрын
this is the most amazing thing ive ever seen in my whole education
@Nick-fn8gz Жыл бұрын
Hi, what % of concentrations did you use? And for how much time did you perform the electrospinning? I find it hard to maintain a stable taylor cone, and also to obtain a right amount of materials that can be removed from aluminum foil and be analised, do you have any tips?
@vijii93172 жыл бұрын
15 mit is enough for drying PAN ? i guess so u should allow 12hr for drying process ..then only you will get membrane
@fleureahzafe1012 жыл бұрын
Good day! May I ask how much or what will be the cost (in dollars) of the whole process of the Electrospinning to form a polymeric hydrogel?
@materialsandtechnology89562 жыл бұрын
Watch PVDF membrane synthesis using electrospinning kzbin.info/www/bejne/lZDEdZ-krs2teqc
@amirhosseinfarahani97084 жыл бұрын
Is there anyone can help to calculate the strain or stress applied to the solution through electrospinning process?
@leilym63322 жыл бұрын
May I ask about the MW of the PVA you used and what was the concentration of the solution?
@materialsandtechnology89562 жыл бұрын
Watch PVDF membrane synthesis using electrospinning kzbin.info/www/bejne/lZDEdZ-krs2teqc
@LT728844 жыл бұрын
How does the material continue to hold a charge once manufactured into something like an N95 mask? Thats the part o dont understand
@NanolabInstruments4 жыл бұрын
It will have some statics. For more content on electrospun fibers for face masks, check out: kzbin.info/www/bejne/bovddmh-jbqAaJY
@095_gloriagalores24 жыл бұрын
where did the red alligator come from? was it from the syringe pump?
@ilyasskhotbi31938 ай бұрын
it's coming from the high voltage power supply (The syringe must be connected to + terminal)
@Chrisismagical4 жыл бұрын
What can this electrospun fiber be used for? Would it be possible to incorporate it for the use of surgical facemasks?
@NanolabInstruments4 жыл бұрын
Yes, it is definitely doable. We have some formulation for incorporation of nanofiber in face masks. Please email us at info@nanolab-i.com for more info.
@hardwareful4 жыл бұрын
@@NanolabInstruments now is your time to demonstrate a simplified, scaled-up version, get it FDA approved and out into the field. Go go go :)
@NanolabInstruments4 жыл бұрын
@@hardwareful we have the scaled-up version. Stay tune for the next video on nanofiber-coated face masks :)
@komalmalla20766 жыл бұрын
I like this video. Could you tell me please can I used PLA and GEL 2:1 mixture for electrospinning
@NanolabInstruments6 жыл бұрын
Hi Komal, thanks for your interest. Please direct any questions (technical or otherwise) to info@nanolab-i.com. Thanks! :)
@maherr1 Жыл бұрын
price ?
@thangpham41966 жыл бұрын
amazing
@hardwareful4 жыл бұрын
Time to build a machine that spits out FFP3 masks :)
@imamwsinagasfamily54436 жыл бұрын
Thank you.
@capatchino5 жыл бұрын
What is the material spun??
@NanolabInstruments5 жыл бұрын
Hi Hussam. Thanks for your question. We use our PVA solution.
@capatchino5 жыл бұрын
@@NanolabInstruments do you use only water to dissolve PVA or you use another solvent as well, what's the composition of the solution? Thank you
@NanolabInstruments5 жыл бұрын
Hi Hussam. Thanks for the question. The solution consists of water and PVA only.
@ysabelamaxinenulud57824 жыл бұрын
@@NanolabInstruments Hi! Just for clarification :) Will the nanofiber dissolve with just water only? Or you have to add water and the material/solution it was made from?
@NanolabInstruments4 жыл бұрын
@@ysabelamaxinenulud5782 Hi there, the pva polymer dissolve in water only. Constant stirring and some heat are needed to make the polymer solution.
@jiong-tyx2 жыл бұрын
😷😷😷
@jimmy111356 жыл бұрын
777
@yimahuang1916 Жыл бұрын
Thank you for helping me understand how this method works!