I'm glad to see you review this amp from Orchard Audio. I don't think their amps really get the attention they deserve. I've had the Starkrimson Mono's, with the higher gain option and 300W power supplies in my main system for over 6 months now. So hard to describe just how good they sound! Very full and dynamic sound with the punching power most amps are missing, while still sounding analog. And these amps play very clean at even the highest volumes.
@Audfile Жыл бұрын
I recently bought the Starkrimson monos with the GaN power supplies. They mopped the floor with my Parasound. Great at everything. The speed and resolution and sparkle combined with the easy, non fatiguing presentation is truly high end. Also, bass control no AB could match. Its also true: i run them at healthy volumes, and they are actually cold to the touch!
@OrchardAudio Жыл бұрын
Thanks for the support, I am glad you are enjoying your purchase.
@bilguana1111 ай бұрын
Great amp! Sounds beautiful driving my ELAC Veal 409 speakers. It never gets hot.
@DANVIIL12 күн бұрын
If I diidn't have the Rogue Sphinx V3 integrated amp with 100 WPC with its tube preamp, I'd buy the Starkrimson for my .7 Magnepan speakers. The Sphinx just sounds so good with the Magnepan.7 speakers, I just don't feel the need for the more powerful amp. This Rogue/.7 Magnepan combination never leaves me feeling like I'm missing out on anything.
@riccitone11 ай бұрын
Another great and highly informative review, thank you! Really want one of these someday. Hopefully not overkill for my little Spendor Classic 4/5's, but would definitely future proof any system upgrades down the line. 🙏
@johnmorgan6724 Жыл бұрын
Thanks for sharing something with us.
@geoffreydebrito7934 Жыл бұрын
Thanks for the review. I've had my eye on the Orchard Audio MonoBlocks for a while. If I ever pull the trigger on them, I plan to match them up with a Tube preamplifier. Probably the Musical Paradise MP-701 MK2 Tube Preamp. I suspect a fine tube preamp is called for as I've noticed that none of the reviews of GanFET amps mention aspects like tonality and palpability. Even soundstage and imaging are often an afterthought. IMO, until solid state amplification matches well implemented, single ended triode tube amplification in those areas, it will continue to be a case of personal preference; Vanilla or Chocolate, Beer or Wine...
@korling99 Жыл бұрын
Another great option for Maggies. I’ve got the Peachtree Gan400 for my Magnepan LRSs. I’m impressed with the GanFET tech. This Orchard Audio would probably pair well with a Schiit Freya+ in tube mode.
@OrchardAudio Жыл бұрын
I have quite a number of customers doing exaclty that Freya+ in tube mode into my amps. Also this amp pairs great with Magnepan LRS and the 1.7 speakers. See Tom Martin's review from The Absolute Sound.
@OrchardAudio Жыл бұрын
Thank you very much for your time and effort.🙏
@Ian-wh8ut Жыл бұрын
always great to see a new vid from MOD!yesterday i got an class d sub(rsl) and the idea of class d power in the low end of things with ab power in my 2 channell amp makes sense to me. guess ill find out soon enuff . please keep em comming man!
@stephenbailey9969 Жыл бұрын
I glanced at the Starkrimson, but picked up the XTZ Edge 300 to try and save money. Very natural sound with good control, no glare at all. Class D has come a long way.
@TheGoldentrev1965 Жыл бұрын
I also started out with the edge...liked the sound size and efficiency. Still looking, I found orchard audio. Bought the dual mono and loved the sound. More open and tight....then I bought the DIY version of the dual mono starkrimson ultra....Wow! More open sounding. Soundstage is amazing, speed airy highs and tight bass...definately a step up for even the dual mono blocks. Gan fet forever.
@stephenbailey9969 Жыл бұрын
@@TheGoldentrev1965 My taste is not for the airy or transparent. I like a sound where the instruments and vocalists have flesh on the bones. That's what my current set-up delivers. Strong sounds coming out of a pitch-black background. Glad you found some components that match your needs. Until you find them, it's a hunt with lots of hit and miss.
@stephenbailey9969 Жыл бұрын
@@TheGoldentrev1965 Just as an afterthought, if you're still experimenting, the boys over at Alpha Audio channel are very into the new Hypex Nilai dyi kit's sound. They seem to think it's superior to a lot of other class d amps. There are some comparison demos on their channel.
@larryschwartz98839 ай бұрын
Great review. Very informative and helpful.
@psyphonyxaudio11 ай бұрын
Love the intro ..
@carminedesanto6746 Жыл бұрын
Having been an owner of Apogee Scintillas…sometimes you need that level of juice! But …you may not need it …but it’s nice to have. 🤣☕️🍕👍
@sonusancti7 ай бұрын
Good video. You're one of my goto reviewers and i still don't know your name. Here's my take on high wattage amps. Do you need a V8? Yes and no. Its speaker dependent and synergy ultimately but consider an imaginary 99% perfectly musical system listening at say 80dB. If i wanted to play it louder because its my favorite artist. Often we will be disappointed, either the speaker or the amp or both can't "preserve" the perfection at the loudness we crave. This is where the headroom comes in and the speaker's power handling ability is required. A 30 watt SE KT150 amp might well cut it given the right speakers. I just love this hobby with all its complexities. More power to your channel MOD!
@paulstubbs7678 Жыл бұрын
Looks nice, I'm kind of over the other manufacturers who just bung in a pair of off the shelf class D modules in a box with their name on it and call it a day.
@ramsaybolton9099 Жыл бұрын
Nice video. Firstly it depends on the room. In. 20x30 ft room, 500 watts is not all that, especially if you’re playing reggae ect. Then, hopefully you have subs with their own amp to augment the sound. At this level, music begins to sound real, like it is on stage. Secondly, lower volumes have more snap and dynamics. Lower wattages are ok, but when you want to feel the music, higher wattages are a must. Everything else is a facsimile, kinda.
@thinkIndependent202411 ай бұрын
3- 6 times a year with a Slight tech spin you be set to be one the top before you know it. Leo and I have similar backgrounds in Fire Safety & Design and HIFI Love Great laid-back trustworthy review from the heart!!!
@MODAC11 ай бұрын
Thanks
@skip1835 Жыл бұрын
Might be worth pointing out, at least as I understand it, the power needed requires doubling for every 3 db of spl (sound pressure level) gain if the rest of the system remains the same - that is, a 100 watt amp, in theory, is only going to produce 3 db more gain in spl compared to a 50 watt amp - - by the same token, a 500 watt amp is only 3db louder than a 250 watt amp - unfortunately, that's not a "night and day" difference in overall loudness which I would kinda think may be contrary to what some listeners might be expecting when considering a 500 watt amp - although, of course, I wouldn't be surprised if there are exceptions to that formula that I'm not aware of.
@OrchardAudio Жыл бұрын
You are correct a doubling of power is 3dB SPL difference. So if your speaker has an efficiency spec of 90dB , that is at 1W. So at 2W it will be 3dB more and so on... 96dB at 4W 99dB at 8W 102dB at 16W 105dB at 32W ....
@LennyAyzenshtat Жыл бұрын
@MichelLinschoten correct. Every time you double the distance you loose 6dB.
@n.lyndley.98892 ай бұрын
lose
@Audiorevue5 ай бұрын
I've heard of orchard audio for a while now and have always been curious, thanks for sharing. I will like to add though that the NAD 3020 was never about using top quality parts, far from it. If you look inside that thing and if You've ever owned one of the original 3020s you'll know that all the capacitors and everything in that thing was as cheap as could be, they did that to make it as cheap as it could be. The reason the original 3020 sounded as good as it did was all due to its circuit, it had a wonderful circuit designed by the late Bjorn Edvardsen.
@Jack969937 ай бұрын
Trust me you need 500 watts /current Especially if you own Maggie's
@MODAC7 ай бұрын
That's not my experience. Getting great results with my tube amps with 1/10th of the power.
@Jack969937 ай бұрын
@MODAC same here with my VAC PA 100 100 tube amp on 4-ohm taps and ARC LS15 tube preamp But my Spectron musical MK lll class D amp designed by John Ulrich output was 500watts@8ohm 650@4ohms and 1,200 watts@1ohm brought my Maggie's to their knees 😅
@harrisedgar Жыл бұрын
subscribed...!
@nikkipatton-mk8st Жыл бұрын
Id love to see a comparison between the star crimson and a mini gan 5 from class d audio. The mini gan 5 uses the same tech and puts out 200 watts into 8 ohms for araund 800 bucks. I have one and love it.
@jayem182611 ай бұрын
I'm on my 3rd one. The mini GaN 5 that is. Yes, it does sound great with my Maggie's too
@jayem182611 ай бұрын
How does Tom sell them so cheap compared to other hi end class D's?
@jayem182611 ай бұрын
I also have an SD250 from class d audio. It runs cool. The mini GaN 5 runs hot. Yours too?
@CarlVanDoren61 Жыл бұрын
As a 20.7s owner, switching amps won't cut the mustard Coda Ts v3 800w@4ohms Go Big or Go Home 🏡
@petekutheis3822 Жыл бұрын
THe E-Purify modules based Class D amps from France is still less costly.
@mikaelsjogren631511 ай бұрын
Thank´s for review! Is there nothing to say about soundstage and 3D experience?
@n.lyndley.98892 ай бұрын
Thanks
@siddharthbiswas9028 Жыл бұрын
Hi. I love you videos. Thanks for sharing your insights. I wanted to ask you for a favour. I love the design of your GIK Accoustic Panels on your front wall. Could you tell me which fabric and wood type you chose to get that colour combo. I would like to order the same
@MODAC Жыл бұрын
Thank you very much! This is what the order says: 4A Alpha Pro Series Bass Trap Diffusor / Absorber (4") rectangle: 2dA Nordic grey grey fabric muslin backing
@siddharthbiswas9028 Жыл бұрын
@@MODAC Thanks man. Truly appreciate your promt reply. You are a champ. Keep doing the good work.
@2023C8HTCАй бұрын
How does this amp sound compared to the Advance Paris A12?
@MODACАй бұрын
That’s apples and oranges really. The A12 is an AB integrated with a multitude of inputs w/ digital capabilities. The Orchard is a basic class D power amp. I do not have the Starkrimson anymore, so I was unable to compare. Thx
@ceylonmooney Жыл бұрын
"ferrari engine in a toyota body" is funny. that describes van alstine as well, tho hes been upgrading the look of his gear lately, even the budget preamp.
@SuperMcgenius Жыл бұрын
The Maggie’s have a crossover problem with both design and quality of parts, I like Maggie’s when mods are used well, a review with an better sorted speaker would be of use, Vandersteen 3a or Tad
@MODAC Жыл бұрын
Check out the recent video about my modded Maggies. kzbin.info/www/bejne/fHKtmoOKd9h0pck
@davidcross890 Жыл бұрын
For those that can't afford the best qualities available of ultra high end applications this could possibly fill a gap for less cost with lower qualities of ultimate performance but still producing better than average sounds
@petekutheis3822 Жыл бұрын
Dont give a ratts arse what Amir would think anyway!
@MODAC Жыл бұрын
AGREED!
@clemmtec9506 Жыл бұрын
This amp and the crown xls which one do you think sound better ?
@MODAC Жыл бұрын
This one.
@clemmtec9506 Жыл бұрын
@@MODAC Thank you
@aussie81145 ай бұрын
1 year warranty is not acceptable to me.
@sidesup8286 Жыл бұрын
Does the Class D amp have much of an electronic signature, and what is the price? Bryston amps have always sounded like they have some admirable qualities, but too much of an electronic signature.I haven't heard Bryston's latest, or maybe even the line before that; so I could be out of date. If they sound great with the new LRS+ speakers, that would make those speakers viable for a whole lot of people, who don't want to spend 3 grand on amps for such a demanding speaker. With such a long wait.
@LennyAyzenshtat Жыл бұрын
This amp is a very good match match for LRS+ and 1.7i. I have many customers with one of those.
@BoRerunn Жыл бұрын
How can you connect a sub
@MODAC Жыл бұрын
High level connections from speaker terminals
@BoRerunn Жыл бұрын
@@MODAC is it includewd on the base model
@MODAC11 ай бұрын
Yes, they all have speaker terminals
@uncleremus64 Жыл бұрын
4 different caps.
@MichelLinschoten Жыл бұрын
I'd take the bryston anyday over these china fabricated ic amps
@MODAC Жыл бұрын
@MichelLinschoten it’s not Chinese dude. Made in USA. Watch the video.
@SuperMcgenius Жыл бұрын
Wtf, 250$ for a balanced to single end in put, I would just make a cable or buy one .😵💫
@MODAC Жыл бұрын
There may be a bit more to it than that. This one is powered.
@OrchardAudio Жыл бұрын
There are three ways to get from RCA (unbalanced) to XLR (balanced) (1) Use an RCA to XLR adapter With an RCA to XLR adapter, you break the balanced input on your amplifier or pre-amp because 1/2 of the XLR input is shorted to the RCA’s shield. Depending on the design of the balanced input this can have multiple undesirable effects. (2) Use a transformer-based RCA to XLR Converter A transformer-based converter can work well as long as it is properly matched to both the RCA and XLR side impedances. However, even if it is properly matched the transformer creates AC coupling which causes bass phase shift. (3) Use an active converter With a DC-coupled active converter, all the issues associated with the first two approaches are eliminated. Our converters fall under # 3 above.
@n.lyndley.98892 ай бұрын
You are obviously not trained in electronics.
@SuperMcgenius2 ай бұрын
@@n.lyndley.9889 sorry to say , I am .
@jimbendtsen8841 Жыл бұрын
Class D is switching power on and off. Class A is always on full power. Gallium Nitride FETs switch up to 4 times faster than Mosfets, so there is less loss or lag of signal.