THE PERFECT FIT!? - LOK Grips “Bogies” - CZ SP-01

[@82luft49]

By the way, Lok grips are half the price of VZ grips with the same G10 quality.

[@apm1515]

I put these same grips on my Shadow 2. Great fit, easy install. I went for black on black. Very happy.

[@keyup2626]

I hope you contacted Jayson at lok grips as he would want to know he’s a great guy to deal with.

[@f1176]

Yes, contact Jayson definitely. Before you do any sandind, beware of the G10 (composite material) sanding dust is extremely toxic to lug causing cancer. In the past many many fabrication workers already suffered lug cancers. EPA has bulletins in this regards.

[@hardcore4476]

@@f1176So I’d imagine the have good respirators at the factory and good ventilation booths specifically for sanding.

[@BigJohnsonGG]

Take them off & see at the top on inside grip where it fits in to the pistol grip & see if there a rub area then just sand area & then reinstall. I have LOKGRIPS On all mine & love them! I have the same blue ones on my 97B. Carry On

[@InSightFreedom]

Unfamiliar with that particular model but as in 1911 grips, does adding a small rubber bushing at the set screw help?

[@hardcore4476]

Beautiful grips! I just ordered the same ones in black with neon green liner for my P-01. Can’t wait to see & feel Lok grips in person!! What did you do to remedy the fitment issue if I ever run into the same problem?

[@frankhellman6879]

If warming it up and bending it doesn't work, they won't send you a replacement or it's the frame that's out of spec, try putting one or two pieces of electrical tape on the back of the grip at the upper end. It doesn't look like you'd need much, so it shouldn't cause it to stick out. Easy to try and not permanent if you don't like it.

[@scottf.3808]

Talk to the owner as he takes care of his customers...I have Lok grips for my CZ 75D PCR and they fit awesome...Good stuff...

[@xithappens]

Hi Nolan. Did you ever fix the fit issue? I used the hex screw and o-ring LOK sent me with the grips and they fit perfectly, no room for movement. Maybe the o-ring is what fills any gaps left?

[@billpohlman803]

My "Cool Hand" black and white ops grips fit perfectly-no flex. Installed on my c100 Turkish cz75 compact clone. Kotaboy32 had the same problem with his va grips.. Wish you luck!

[@stileshumphrey4195]

I was just about to order them as they are 20% off for Black Friday. Same color and Bogie style.

[@skylerharris5563]

I have those exact grips on my shadow 2!!! Good choice....actually mine are palm swells. Same color and pattern

[@range-randy8148]

I've had wood grips that have not fit flush that a little bit of sand paper fixed. I would think would also work on polymer type grips but not sure.

[@cdenton651]

I ordered a set of crosscut for my SP-01 and they fit perfectly

[@jamesbroughton7870]

I had the same fit problem with my grips I just took off looked on the underside did a little bit of shaving off of some material underneath and then they fit fine

[@tecobyrd937]

they look good!i also have lok grips on my pcr mines are zombie green good choice

[@russelder9743]

I am looking for grips for my 75bd......like that blue, very nice looking....sorry the fit isn't 100%....let us know how it works out

[@SheepDog229]

Nice vid, thanks. I like the blue a lot. I would like to have seen a before and after of how the pistol fit in your hand. I am thinking of replacement grips for mine to improve my ability to reach the controls. Also, maybe you could use some JB weld to build up a low spot so they fit better (if you haven't already fixed this).

[@alursino3213]

You probably remedied this already but it’s an easy fix. Either take the grip off and sand the opposite side to ensure full contact is made around entire frame or custom cut and run some talon grip material on the inside of frame to eliminate any movement. Enjoy that beauty.

[@user-no9qb6lj7c]

With the current price of the sp-01 being around $750 do you still think it’s worth the price ? Ive been wanting to pull the trigger on buying one recently

[@sackmaster2469]

Just get it

[@user-no9qb6lj7c]

@@sackmaster2469 I did lol

[@sackmaster2469]

@@user-no9qb6lj7c great purchase!

[@hardcore4476]

Absolutely!

[@joejr9653]

The blue doesn't look bad but the best color is always that dirty olive you have on other gun grips.

[@Matt.Hemple]

you need to put the cajun pro package in there. i finally put it in my p07 literally made it a new gun

[@hardcore4476]

Just got pro kit for my P-01 and now I may have to try it for P-07 eventually. I have Mcarbo spring kit in my P-07 right now and helped but sure it’s not near CGW goodies!!

[@aasillak]

Blue grips looks great. But yes like Harry’s Holster said I would just contact Lok Grips.

[@DaveandDebe]

Did you send them back or call the maker??

[@arsenal_616]

The blue definitely looks nice.

[@Fugettaboutit]

Some strategically-placed pieces of electrical tape helps fill in the space between grip and frame to take away some of that flex. It can happen with a lot of different CZ grips since there is only one grip screw per panel at the back.

[@chrisimes478]

Are these the CZ 75 Thin Bogie G19’s?

[@callmecap1373]

Sanding g10 works if it's too high.

[@ulflyng]

Maybe put the grip in hot water, and form it (sightly!) after it has warmed up?

[@HarrysHolsters]

You're not making my futile search for a P01 Omega easy on me! The blue looks great! I'd contact LOK. Everybody can have an out of spec product leave the factory every now and then.

[@christopherflesner8095]

Harry's Holsters I must admit that although it sucks to see his grips not fit quite right, it does make my heart smile just a little because I still haven't been able to lock down a p-01 omega here either. I'm just a little jealous...

[@HarrysHolsters]

You and me both man!

[@minnesotanice369]

I just ordered the bogies are they as dope as the hype

[@hardcore4476]

Are they? Just ordered myself and got the regular not palm swells here.

[@kyleg1166]

Cajun gunworks aluminum grips fit so well they have a slight “snap” when installing them. I have heard everyone talk about LOK and VZ but if you like the aluminum check those out. I have to say those LOKs look good in that blue too, nice setup!

[@waltervangorden5671]

they look good,

[@YouTubeChannel-wy7yz]

I like that color.

[@bassiclogic]

Sweet!

[@waltervangorden5671]

put some white chalk on the grip to see the high spot

[@kang5920]

I have same issue on right side

[@simonkovacs5973]

Contact Jayson, he'll replace them....

[@chaoticcaninejb]

BLING!!!

[@meangene4038]

It's CZ's fault. One screw for a long grip like that? ....must drive grip makers nuts.

[@bassiclogic]

Hey idiot it's the gun manufacturers design not the grips! It's a one screw design, kinda of like you! :)