The Pink Build with Cooler Master NR200P

[@anaisabelribeiro2721]

Great video, thanks! I've been looking for an NR200P build video that doesn't skip the simple steps

[@LevelUPGamingTech]

Glad you liked it 😊

[@wapperjaw8282]

Thanks, great video on Cooler Master NR200P build. I'm building this for a friend that wanted an ITX motherboard with this case, so this will be my first ITX PC build. *I like the case BUT, the one and only thing I don't like is not having access to the power supply switch.* So I recommend a Surge Protector Strip. You also get a Huge TU for showing more detail in the shortest time build than all the others I have seen so far. And none of them have shown how to install the power supply.

[@LevelUPGamingTech]

Thanks buddy 😊

[@ahreg3417]

Going through the comments, I like how much you engage with your viewers with questions.

[@LevelUPGamingTech]

Got any? 😁 Jokes aside I tend to answer all of them 😉

[@ahreg3417]

@@LevelUPGamingTech Do you find itx cases annoying to build in due to size?

[@LevelUPGamingTech]

Sometimes yes, I find it also on full ATX cases. In both cases, it has to do with cable management 😁

[@laszlosarkozi1385]

I think if you build in a pink and white case you need to lean more heavily into the color theme of pink and white - like I did. I built a PC for my daughter in the same case last year. I built it on the B550 platform (MSI B550i gaming edge max wifi), Corsair SF 600-600W PSU, Ryzen 5600G with a Wraith Prism RGB cooler, 2 x 16Gb of Trident Z Neo RGB DDR4 @ 3600Mhz, 2 x 1TB WD SN550 Nvme SSD, PowerColor's Hellhound Spectral White RX 6650XT, and used 4 pieces of Corsair 's QL 120 RGB fans for color and cooling (2 under the GPU as intake and 2 at the top of the case as exhaust). I left all the RGB on their default "rainbow puke" color theme because it goes well with the pink and white theme of the case. The accessories are also the same color theme: Logitech M317C mouse in pink and white, Asus Tuf Gaming P1 Demon Slayer L.E. mousepad also in pink and white, Red Dragon Hades K623-P1B Mechanical RGB keyboard in - you guessed it - pink and white and Edifier R12U speakers in white. Of course the desktop background is also pink and white.

[@DarioJM]

So, the psu should be on all the time Since there is no access to the switch, right?

[@LevelUPGamingTech]

Unfortunately this is like this with all ITX cases...

[@DarioJM]

@@LevelUPGamingTech but there is no problem with that right? Because im planning on buying this case.

[@LevelUPGamingTech]

@@DarioJM Why would there be? If anything get a power strip that has a switch on it if you are afraid to leave it like that 👍

[@pigeonstrangler]

I’ve got a Raijintek Metis. You can access the power switch no problem.

[@christianorsi6487]

Great build.. Loved the house vibes throughout as well!

[@LevelUPGamingTech]

Thanks man 😊

[@EvilDeadGuy666]

Hi did you have to use custom length cables with this build?

[@user-bgw01uykfj]

Could I ask what the name of cooler and how tall the height is?

[@Vlac73]

SCYTHE FUMA 2, 154.5 high

[@v1c3_]

not a bad budget build.

[@aqwandrew6330]

The top included case fans can be plug ib directly to the psu without splitter right?

[@LevelUPGamingTech]

As I remember, to the motherboard not PSU

[@GionSnow]

Can you fit a micro/mini ATX board in this case?

[@LevelUPGamingTech]

No, just ITX

[@GionSnow]

@@LevelUPGamingTech Ok thanks!

[@Limegreenisthebest55]

Nah that's false it's given in the Amazon listing that u can fit micro atx motherboards in it

[@LevelUPGamingTech]

@@Limegreenisthebest55 If you chop it in half 😂, this case only accepts ITX boards

[@dodiauliareza4942]

Is there still a place for 2 piece 12x15 fan in bottom?

[@LevelUPGamingTech]

With the GPU that I used, barely, slim fan would fit, but not regular 25mm thick. The card I used is literally 3 slot card so that is blocking the space at the bottom...

[@dodiauliareza4942]

​@@LevelUPGamingTech Ok. Is there any spesific number in Centimeter for max GPU Height if using 12x15 slim fan in this case? i was looking for the video but can't found it.

[@LevelUPGamingTech]

@@dodiauliareza4942 Hmmm you see I never thought of it, for example those bulky MSi cards which have wider boards than usual GPUs will not fit because of the height of the card alone. Then there is thickness, if I remember correctly with this one that I used it's labeled as 2.5 slot card (but feels more like a 3 slot card), 18mm of space is left below it. You can always go with vertical mount, but in that case AIO is a must

[@reesesman8821]

I'm looking to snag this case for my gf who loves the teal color

[@anshulsingh8326]

How much do you think the weight of whole build is without gpu? Since I will be traveling every 2-3months I want to take the pc with me in the flight cabin. So if less then 7kgs it's good.

[@LevelUPGamingTech]

Should be less even with the GPU 😀

[@Lennox032]

could I squeeze a full size ATX power supply in this?

[@LevelUPGamingTech]

Nope, SFX or SFX L only

[@Lennox032]

@@LevelUPGamingTech actually just saw ATX PSU's do fit but, require a larger psu bracket to be ordered cheers,

[@LevelUPGamingTech]

@@Lennox032 Oh nice then, out of the box they don't fit, but good that there is a solution 😉

[@ykguy6379]

@@LevelUPGamingTech yeah 140mm max

[@marcosousa336]

Hello. What fans are those, if you don't mind me asking? Btw, is there still some space under the GPU to put normal 25mm fans, or would you have to put slim fans?

[@LevelUPGamingTech]

Fans are CM than came with the case, and yes there is place just enough for regular 25mm fan under the GPU 👍

[@marcosousa336]

Am considering getting this case, but wanted to use the T30 fans from Phanteks on top and bottom but I was worried that they won't fit because of being 30mm and not the normal 25mm. Do you think it be possible?

[@LevelUPGamingTech]

@@marcosousa336 You can use them on the top, but on the bottom it might be an issue, but mainly because of the GPU thickness so you need to first measure your GPU to see how much space will it take away, then add for the fans...

[@BEARDEDRUNKMANx]

Hey awesome build. Could you please say what are the temps for fuma 2? And which direction exhaust is for the cooler?

[@LevelUPGamingTech]

Temps were maxed out in mid 70s for the CPU, for the GPU in lower 70s and upper 60s most of the time. It exhaust at the back

[@พอเถอะพอ-ษ8ง]

can we place 15mm height fans like NF-A12x15 at the bottom.

[@LevelUPGamingTech]

Yes you can 😃

[@RegorForgot]

music tracklist?

[@glitteree]

doesn't the case come with a psu? i read that somewhere

[@LevelUPGamingTech]

Nope, maybe the MAX version does

[@KineticPixell]

Only the NR200P max comes with a psu

[@sweetphil4670]

Thinking of building an air cooled NR200P, as well. How are the thermals on this one?

[@LevelUPGamingTech]

For an ITX case they are pretty good, make sure you have bottom fans as intake, they help a lot. 😉 Mesh side on both sides is also better option then using the glass panel on the left...

[@sweetphil4670]

@@LevelUPGamingTech I noticed you can fit two additional fans on the side panels. Are those for behind the motherboard or on the side with the GPU? Thanks for the info! Yeah, I was wondering why you didn't put two slim 120mm fans underneath the GPU. 😂

[@LevelUPGamingTech]

No no those two are on top of the case, I could not fit fans in the bottom because the GPU is too bulky. Take that into consideration as well. You can use GPU vertically if this is a problem

[@LevelUPGamingTech]

@@sweetphil4670 OH and yes you can fit two fans on the rail on the side, I did not use it because of the glass panel, so yeah 😁

[@spare8869]

Would u say the pink colour is warmer than in photos ?

[@spare8869]

In ur video it seems a slightly darker shade than the pcitures online ^

[@LevelUPGamingTech]

It depends on the light conditions, it's a bit warm 😉

[@cantthinkofaname925]

Can these cases work with the new AMD RX 7900XTX? Great video by the way! :)

[@LevelUPGamingTech]

Depends on the card length, check my review of the case I remember mentioning the max GPU length support in the review 👍👍

[@yehudilara]

Hello, I really admire your setup and I'd like to create something similar. However, I've purchased a 7900XT with a length of 313 mm. Could you please tell me the length of your GPU? would the 313 mm GPU fit in the NR200P? Thank you for your assistance.

[@miguelmano147]

hey, your gpu will fit. Im using a 336mm 3070 ti aero and it just fits perfectly, you have the option to slide the gpu in via a hole on the bottom side of the front panel

[@sardarasif1858]

@@miguelmano147 Its so amazing that this case can really handle some BIG GPUS like that

[@miguelmano147]

@@sardarasif1858 Truly, I was desperate searching an itx case that can handle this chunky gpu, while still remaining "small"

[@NabiulAlamBappy]

​@@miguelmano147 how? I heard that this case fit highest 330mm gpu.

[@mrb3991]

Awesome, Im about to build in this case too but the Black Variant . Thanks

[@LevelUPGamingTech]

Good luck with the cables man 😊 It's a bit harder to hide them all, but doable, there is a place in the front 👍

[@mrb3991]

Ok thank , i thisnk the corsair 7 750 sfx briaded cables might help

[@LevelUPGamingTech]

This LianLi also has braided cables, but I wanted white extensions, thus adding another bunch of cables to be hidden somewhere 😂

[@cofilm1]

Is this case compatible for asus tuf gaming b550m wifi plus motherboard?

[@LevelUPGamingTech]

No dude, that would be the Micro ATX size and the case accepts only ITX boards 👍 Smaller than that one...

[@cofilm1]

@@LevelUPGamingTech Which case would you prefer compatible with my motherboard, it is more important that it is small. thank you

[@LevelUPGamingTech]

@@cofilm1 You are in a somewhat difficult position as mATX boards are not that wide spread... well DeepCool Macube 110 fits it, Azza Elise 140, Antec Draco 10, I did those cases on the channel, for others, pick what you like, go to their website and check for compatibility it needs to support mATX as biggest board supported. Check out also Fractal compact models, they also accepts mATX boards

[@cofilm1]

@@LevelUPGamingTech Thank You

[@jayveediego9430]

@@cofilm1 you can also check sama im01 or techware fusion. It looks like nr200p tho theres no pink color 😂

[@gfddgitgud3848]

Thanks for the video. Do I need extension cables? Or I can just what comes with psu or gpu? Thanks very much

[@LevelUPGamingTech]

The ones from the PSU are enough, extensions are for beauty reasons only 😁

[@gfddgitgud3848]

@@LevelUPGamingTechthanks!

[@msaylorBTC100M]

great video

[@sgtdarkest]

Hello, good video. I have a question, in the end you put the glass panel. Does this have no problem with the AIR Cooler? Or what air cooler measurements do you recommend to be able to use the glass panel? Thanks

[@LevelUPGamingTech]

0.2mm clearance left this is the max of the max air cooler size that can fit withing this case...

[@sgtdarkest]

@@LevelUPGamingTech thanks

[@mannyc.4345]

I noticed the Scythe Fuma 2 CPU cooler does not touch the RAM and the RAM seems visible, did you have to do anything special? I’m trying to determine if the cooler fan would block the RAM or if it would not fit.

[@LevelUPGamingTech]

Nothing it has enough clearance 👌

[@faudoisengard2738]

Hi, I want to know if you can fit the side bracket with duo fan setup for D12L? I'm planning my setup as below: - D12L with duo fan setup (intake) - 2 fans top as exhaust - 2 Slim bottom fans as intake - 1 140mm fan as exhaust on the side bracket (PSU side) How's your thought on this setup? Been considering non-stop for my first ever NR200P build

[@LevelUPGamingTech]

It would not fit, 10mm or so needed more ☹

[@faudoisengard2738]

@@LevelUPGamingTech so what is the max height for the cooler if the side bracket is installed? I noticed that the bracket slightly sinks inside the case so that would loose a few mm

[@Jacklew321]

Where is the air getting pulled from?

[@LevelUPGamingTech]

Negative pressure, pulling from the holes of the case

[@hereLiesThisTroper]

Hello, I really enjoyed watching your build. I'm also planning to get an nr 200p but I have a question. Was there any issues fitting the tempered glass with it hitting the fuma 2 cooling fan? Just want to be absolutely sure on this b4 getting one. Thanks!

[@LevelUPGamingTech]

0.5mm clearance, literally 😉😉

[@hereLiesThisTroper]

@@LevelUPGamingTech oh wow, so the info the cooler is indeed true! It says 154.5 mm and was skeptical on that. That's so small haha! Ok thanks for the info!

[@LevelUPGamingTech]

@@hereLiesThisTroper Yeah it's literally tightest possible fit 😉 Metal panel fits with extra space... There is Fuma rev 2 as well, but same height

[@juiciness]

Would have liked to see the last shot in focus. With the window on.

[@LevelUPGamingTech]

And that would be the reason why I ditched Panasonic and switched to Sony from there onwards... Sorry about that 😒

[@juiciness]

@@LevelUPGamingTech It was a GREAT video otherwise!

[@LevelUPGamingTech]

@@juiciness Thanks buddy 😊

[@muhammadamirfarqhan1140]

I have the same case but i just wondering where to put my 1tb 2.5 hdd. Help me

[@Alvenrik1]

There are attachment points for them just under the front pannel. You have to get the rubber pieces that look like screws, snap them into the proper holes for them and then you screw some tiny rods into the HD (Those came with the case's screws) and then those rods just snap onto the rubber mounts and there you go, a shock mounted HD.

[@muhammadamirfarqhan1140]

@@Alvenrik1 i see thanx, i thought that front panel only fit for ssd. Cs right now i install the hdd at side bracket panel that close to the glass panel. Back to regret myself and should spend buying 1tb ssd instead of hdd 😂

[@menmabmx1995]

LianLi SP750 PSU are they loud? I've read reviews about them being loud

[@LevelUPGamingTech]

It does not spin all the time, only when under load, but it's not that loud, maybe depends from unit to unit. Once you are under load and all the fans ramp up, it is less audible then the rest of the system

[@menmabmx1995]

@@LevelUPGamingTech cool thanks

[@HRAstudio]

Is it possible with ASUS TUF GAMING B660M-PLUS WIFI D4 motherboard?

[@LevelUPGamingTech]

Not possible, since you need ITX board, your board is mATX

[@nelly1963]

price of all this ? pls

[@LevelUPGamingTech]

around 1600 something like that, can't remember honestly

[@Dukitek]

So good music. Watching this video and enjoying in both music and build. 😊

[@LevelUPGamingTech]

The way it's meant to be watched 👐

[@eddyhaze8239]

fuma 3 is a beast to bad it's like 1mm to long glass panel can't be used

[@wojtekkruk3330]

I dont understand why is so hard to buy a white sfx power supply. At least in Poland.

[@LevelUPGamingTech]

They are hard to find as they are not made in larger quantities like ATX ones. Solution is to either repaint it or use vinyl wrap 👍

[@MrDutch1e]

@@LevelUPGamingTech Cooler Master and Lian Li mass produce them. They are very easy to find.

[@LevelUPGamingTech]

@@MrDutch1e Maybe they do but not all regions in the world nor retailers have them in white... I mean if one really needs it he can find a way 😉

[@carmeloanthony5267]

That gpu sag damn

[@cartoonhead5819]

! Good to Odysee you.

[@JayzBeerz]

that motherboard has horrible vrm's

[@LevelUPGamingTech]

Hmmm I haven't had any issues, yeah it does get hot, but this board was not intended for some power hungry CPU in the first place, Ryzen 7 tops for it is perfect...

[@MrDutch1e]

clearly don't have a clue what you're talking about. 6x 90a power stages + 2x 60a stages is overkill for any ryzen CPU. Literally some of the best power stages you can get lol.