At long last the pond is fully stocked for the summer...hooray 😁 but cleaning the EazyPod is causing grief. 😟
Пікірлер: 30
@johnrodgers27502 жыл бұрын
Hi excellent video of your koi looking forward to seeing them in the pond
@mykoiobsession2 жыл бұрын
Thanks John. Water is still quite green so they're a little hard to see but hopefully I get that rectified soon and post a video that shows them as they are meant to be seen.
@keepingitkoi2 жыл бұрын
Great update bud koi are looking fantastic 👍
@mykoiobsession2 жыл бұрын
Thanks. They are doing well and I'm hoping to put out another video soon once the pond water clarity improves.
@stubbsaquatics60802 жыл бұрын
Sorry again for the late response.. I didn't get the notification.. YET AGAIN.. so sorry Ken. Nice to get them all is. They are huge Nice and thick..
@mykoiobsession2 жыл бұрын
No problem. I don't get notifications at times either. I weighed the large chagoi about 9 or 10 years ago and she came in at 11 pounds then. Not sure what she weighs now but she is heavy.
@LauMagroTheFrenchKOInection2 жыл бұрын
Nice to see your koi up close. Was hoping to see them in the pond. May be next time. You can access the air fittings by removing the 3 screws where the over flows are, remove the central part and remove the media. If you look at my video called spring prep, I did exactly that
@mykoiobsession2 жыл бұрын
Hi Lau. I've taken the filter apart as you suggested in the past but only to change from pump fed to gravity fed, never to access the air fittings because that has never been an issue. Once I get my filtration additions up and running I'll have to take another look at the EazyPod. Thanks again for the advice.
@LauMagroTheFrenchKOInection2 жыл бұрын
@@mykoiobsession you must be happy to see the koi again in your pond after everything you have been through. Looking forward to seeing the next episode. Take care
@Farahcooks2 жыл бұрын
Wow Awesome sharing 😁 Stay healthy ☺️
@mykoiobsession2 жыл бұрын
Thank you. More videos to come soon.
@stubbsaquatics60802 жыл бұрын
My air pump is strong but not sure mine boils as well as yours in the Eazy pod
@mykoiobsession2 жыл бұрын
This year by adding the second pump I'm able to keep both the moving bed filters and aerated bottom drain functioning during EazyPod cleaning. Much better than previous years. Don't know why I didn't of it sooner.
@stubbsaquatics60802 жыл бұрын
@@mykoiobsession good to know
@GrahamTaylor1232 жыл бұрын
Fairly sure you can remove the whole centre section by removing the overflow tri as Lau said. Seem to recall I did it once when I first got the pod to clean it out.
@mykoiobsession2 жыл бұрын
Hi Graham. Removing the 'Y' piece at the top of the filter and the stainless centre tube is not a problem but I'm not sure if I can access/remove the broken piece even once that's done as it is between the outer side of the large stainless part and the outer wall of the filter. I'm working on some filtration additions so haven't tired the repair yet. A video about my filtration changes/additions will be coming very soon.
@LeTwistedOne2 жыл бұрын
Hi Ken my Canadian friend I would recommend bringing the water level up in the easypod for a feast better clean my friend fish look awesome 💯👌🧁👍👍👍
@stubbsaquatics60802 жыл бұрын
How are the sturgeon?
@mykoiobsession2 жыл бұрын
The sturgeon are doing well and loving the freedom of being able to swim throughout the entire indoor pond.
@stubbsaquatics60802 жыл бұрын
@@mykoiobsession I bet they are
@richardwalker66472 жыл бұрын
Hi are you aware that you get a better clean if you raise the water level
@mykoiobsession2 жыл бұрын
Hi. Yes I am aware of that. Following an entire year of the pond full but unused due to illness I have made significant modifications to my filtration system this year and am in the process of adding even more filtration components. As I do this I am still tweaking flow rates, etc which impact the levels in the Eazypod. I will get it sorted hopefully soon but do appreciate the comment. 👍🏻
@rukshan_dhananjaya2 жыл бұрын
Nice ❤️
@mykoiobsession2 жыл бұрын
Thank you.
@FARMOORKOI Жыл бұрын
Nice fish
@mykoiobsession Жыл бұрын
Thank you.
@DerbyKoi2 жыл бұрын
Hi ken you can get to the air fitting but you have to empty the media i used a wet and dry vacuum and then remove the y piece the mesh should come with it. If you look back at my video how the convert a pod to gravity fed you can see how it comes out. You should be able to do it in place and won't take long to do.I hope that helps. Andy👍link to that video here. kzbin.info/www/bejne/r4GmYoOgZ8aeZrs
@mykoiobsession2 жыл бұрын
Hi Andy. I've taken the filter apart as you showed on your video in the past but only too change from pump fed to gravity fed, never to access the air fittings because that has never been an issue before. Once I get my filtration additions up and running, hopefully soon, I'll take another look at the EazyPod. Thanks again for the advice.
@johnmartin-dd1zr2 жыл бұрын
Your measuring in centimetres not inches
@mykoiobsession2 жыл бұрын
Definitely measuring in inches. Although Canada uses the metric system for most things items like lumber, pipe and pipe fittings, etc are measured in inches, feet, etc. I grew up learning inches, feet, yards, etc and at 72 still prefer the imperial system of measurement.