The Powertec Workbench Multipress

[@TheCarterHomeGym]

Good to see the Levergym back! The multipress looks like a good option. The height of the lever arms are definitely better positioned for pressing. I wish Powertec didn't make their benches wider at the low back support area. It doesn't make sense to me, plus it is uncomfortable when doing chest supported rows. Good to see you used the sticker numbers (thanks for the shout out!) and I hope you didn't hurt your head too bad.

[@HomeGymHacksandReviews]

Thanks so much, Carter! I’m glad you caught the mention! For purely pressing and rows, I would also prefer for a “normal shaped” pad. I see the wide bottom as being advantageous for lumbar support for leg extensions and leg presses.

[@BrandonSchwartz1]

Your review was one of the deciding factors for picking up this piece. Thank you 🙏

[@HomeGymHacksandReviews]

Great to hear the review was helpful. I hope you are as happy with the MP as I am. Thank you!

[@marywalton293]

Another solid review. Definitely appreciate the time you spend sharing these.

[@HomeGymHacksandReviews]

Thanks so much! Appreciate the support!

[@Justinsox39]

Ok you convinced me. Got my machine Monday. I absolutely love it

[@HomeGymHacksandReviews]

@@Justinsox39 that is awesome to hear. Thank you for letting me know.

[@johnsfamilychannel6454]

That was an excellent review. I was wondering how my upper body and arms would measure up and you measured it for us. Nice. All of your videos are great. On sale now and will order one tomorrow Thanks ...... Powertec's equipment is great!

[@HomeGymHacksandReviews]

@@johnsfamilychannel6454 thank you. I hope you like it as much as I do. I posted a KZbin Short a week or two ago showing a lift off hack I really like.

[@steverapos3904]

Would love to see an update on this one to get converging lever arms. Also, would be nice if they made the connection point on the back height adjustable to ensure you always have an ergonomic range of motion

[@HomeGymHacksandReviews]

Converging arms are tricky. For some exercises, I don’t want the arms to converge and for other exercises, the feature would be really beneficial. If Powertec made it so the Multipress could do both, that would be awesome.

[@chrisdonnell2575]

It looks incredible! My problem is two car garage gym is full rack bikes, treadmill, sauna, titan squat max md, xmark leg curl, punching bag etc. If this thing didn't have bench attached and I could use my other one would be so sweet! I totally can see why you prefer this to lever arms faster like you said and probably better angles and can press as one or unilaterally.

[@HomeGymHacksandReviews]

@@chrisdonnell2575 thanks so much, CD. It sounds like you have an awesome set up. I would trade out the treadmill for the Multipress, but that’s just me 🤓

[@Bullseye_Strength]

I've realised with the LeverGym that: Decline = steep decline Flat = regular decline Slight incline = Flat... etc. I usually love Decline Presses, but the issue I have with Declines on the Levergym is that if I go much heavier than 2x45 a side, I start sliding up the bench.

[@HomeGymHacksandReviews]

I agree with each of those bench positions.

[@t-manballin2458]

Welcome back to the family

[@HomeGymHacksandReviews]

lol! Thanks so much! It’s good to be back.

[@leftwinger764]

it's always nice to see one of my benches (i have two because i used two rooms, the other one is from bodycraft). I used the bench with the different attachments and its a great bench. I buy after i saw your video about it in the past and your recommendation when i ask. Good video Hacky!

[@HomeGymHacksandReviews]

Thanks so much, LW! Always great to hear from you and I’m so happy some of my reviews have been helpful!

[@JoseSuarez-bk3qg]

I own a Multi press workbench (MP-16) as it’s a 2016 model. The one I have does not come with the plate that attaches to the upright tube to give you many options to set and fine tune the placement of the lever arms for bench and shoulder pressing. I wish I waited for the current model but I’m happy with what I have. Nice review.

[@HomeGymHacksandReviews]

Thanks so much! Yeah, I had the 2013, which was probably similar to the 2016. The additional settings make a huge difference in finding the perfect setting. Back when I had the 2013, I would use various sized shims to find my sweet spot if the machine didn’t offer it.

[@iang8169]

With the workbench you cant detach the bench so if you lower the bench to its lowest postion ,is it the same for squatting as the levergym ? Or you can't get low enough because you end up hitting the bench before you get low enough? I'd like to save some money and get the multi press workbench if I can squat on it

[@HomeGymHacksandReviews]

@@iang8169 squatting on the Multipress is not an exercise I recommend.

[@JoseSuarez-bk3qg]

@@iang8169 The multipress unit cannot be used for squatting movements. The Leverage gym can and would be your best option.

[@mars0494]

Hey I noticed that you mentioned doing shoulder press facing the bench. Does it work the same muscles as not facing the bench? Is it as effective while protecting your shoulder joint? Thanks!

[@HomeGymHacksandReviews]

For the most part, yes, the same muscles are involved. For me, facing the bench, just feels more shoulder friendly.

[@Stroke.survivor]

After suffering a massive stroke 18 months ago bad reaction to the vaccine this Powertec multi gym has been the road home for me perfect for training my week side I can now push 3 plates a side now together and independently this machine has saved my life fantastic peace of equipment 👍💪

[@HomeGymHacksandReviews]

Great to hear you are recovering, training, and the Multipress was a tool to help you along the way!

[@johnpain8380]

Fantastic that you have brought the powertec back. I agree with an relate to your intro in the video. A will look forward to seeing more content on the multi press and levergym. I have recently taken delivery and set up the GLS jammer arms from primal strength as they finally arrived here in the UK after a long back-order wait... Yet I still love the powertec leverage systems! If you ever get a 3x3 racking system I could recommend the Gls for a review as they have a converge option, acting almost like a pendulum to bring the arms closer together as you press. It was also great to hear you mention the prone row variation on the multi-press/multi-system lever arms with the one that hits the upper back (and rear delts). This is one I worked out and is a go to exercise when I am not deadlifting in a cycle. Keep up the good informative work buddy!

[@HomeGymHacksandReviews]

Thanks so much! The Levergym was greatly missed and I’m glad to have it back! Also, really good to hear you are liking the jammer arms. A lot of companies are just starting to make converging jammer arms and arms that adjust more easily on the rack. Up until the converging arms and easily adjustable arms, I have not been impressed with any rack-mounted lever arms…they seemed like way more trouble than what they’re worth.

[@johnpain8380]

@@HomeGymHacksandReviews I thought you would miss the levergym mate. In a time I had to downsize temporarily and the gyms were closed in 2020, I got the lever gym set up in the living room and It is testimony to how little space it takes, yet offers so much in functionality. For this reason I would never want to part with the 'little' gem, and occasionally re live a lever gym only workout back from the living room days, so to speak. Much like you did that very enjoyable mini series you filmed. Legend! Oh really? I was not aware that other companies were working on the converge option, though I figured that they will not be far behind as they want to close the gap on hammer strength and the like being involved in home use gym equipment. Like you I was not interested by rack lever arms for sure, but the converge option and ability to seated chest press, knowing It would not take up any additional floor space for the sake of several hundred pounds/dollars ended up being the deal makers. I definitely agree with how awkward the arms can be to move. I have worked on some techniques to lower the inconvenience, but If it is ease of use and adjustability we are taking about, Powertec's lever gym definitely wins on that front. It is just nice to have the options in order to find the best possible variations of the classic exercises at home i feel.

[@HomeGymHacksandReviews]

@@johnpain8380 thanks so much! I was on the fence about making that Push / Pull / Legs routine for the LG, so it’s really great to hear it was and still is well received. I’ve said it many times, if I could only have one machine, it would be the LG and great to hear you think it’s as good as I do. I’m not sure I’ll ever get Jammer Arms. I do so little barbell work that I sold my Power Rack because it took up way too much space for how little it got used.

[@johnpain8380]

@@HomeGymHacksandReviews 100% with you in the lever gym buddy. I am happy for you that you have acquired a new one and enjoy using it, despite of all the other great gear you have. I had been meaning to ask you, as being 41 now myself, I have had issues from 'heavy' freeweight training over years. I have had to retire the barbell bench press due to a long running shoulder issue (one of the reasons I find the seated chest press of good value as it bothers me less). I still have never had a problem with my knees or squatting in general, but the deadlifts had taken a toll on my lower back. I have successfully spent several months working back in the deadlift cycles, gradually and my lower back still feels fresh after years away from it. So, do you feel you could bring back the king of exercises in the barbell from ever? Or is it like my bench press, where aggravation awaits no matter what?

[@HomeGymHacksandReviews]

@@johnpain8380 sorry to hear about your shoulder issue. The deadlift (even the hex bar version), T bar rows, and barbell bent over rows always caused me trouble after my initial lower back injury. To me, the risk is not worth the reward. I have the Body Masters Low Back Machine and a few other exercises I do to take the place of it. The straight bar bench press is another exercise that I never plan to perform again; I’d much rather use dumbbells or machines.

[@justinvanscoy140]

Just got mine, noticed upper seat might wobble, I just make sure the adjuster knobs r tight and it seems to go away

[@HomeGymHacksandReviews]

Good to hear you got one. Any wobble is from the horizontal track.

[@thebodybeatdownDiTi]

yeah!! there ya go..back to some Powertec. I knew you would go missing some of it lol..Hope you get tons of use from it.

[@HomeGymHacksandReviews]

Thanks so much, BBD! I couldn’t stay away lol!

[@maolam]

Best regards from Europe, thank you for sharing.

[@HomeGymHacksandReviews]

Thanks so much!

[@clarkg5946]

As always, nice review. I'm glad your experience was better than mine. I have several Powertec pieces that I have been very happy with, Powertec rack, leg sled, leverage squat. But unfortunately this piece is not one of them due to a problem you mentioned that some people had reported. I had an old model that wasn't centered. Got rid of the old model and bought a new model. (You are right very easy to put together). But to my dismay the new model was off center as well! I tried taking it apart and putting back together several times but no luck. I think the back piece on mine is defective causing the issue. I asked for a replacement part but they sent me the wrong part which did not fix the problem. I need to go back to them again. Since the bench is attached being off centered destroys the usability/value of this machine.

[@HomeGymHacksandReviews]

Thanks so much! Great to hear you are happy with so many of Powertec’s pieces but I am sorry to hear there was an issue with the presses. I am sure Powertec will help you get everything right.

[@bdog98765]

When did u buy the new model? What year was it

[@MedStopPharmacy]

Nice Video, i ordered this recently and cant wait to use it

[@HomeGymHacksandReviews]

Thanks and great to hear! I hope you like it as much as I do.

[@christophersekerak4700]

I’d like to see a power tower/basic trainer attachment added to the bench.

[@HomeGymHacksandReviews]

That would pretty cool! In one of my videos, I mentioned I would like to see Powertec create a body weight attachment line, including a dip and pull up attachment…and your idea of a Power Tower to combine the pull-up, dip, and knee raise all together is very cool. The only issue I see is that it would be heavy and possibly difficult to attach / detach if it was an all-in-one attachment.

[@Bro-siah]

Geat review! I am definitely picking one up when I have a little more space.

[@HomeGymHacksandReviews]

Thanks so much! I hope you are as happy with it as I am.

[@nomarpierce34]

Hey, this was a great review and actually what pushed me to buy the machine. I really enjoy it! I was hoping to bug you with a quick question if you get around to it. 1) How have you found your workouts convert to free weights? On the PowerTec I'm up to 205 lbs for bench for 3 sets of 5 (so 184 effective weight using their calc). Have you found that converts well to actual bench? I finally have the opportunity to mix in some gym workouts again and want to give myself some reasonable targets.

[@HomeGymHacksandReviews]

Thanks so much. I have only done barbell bench press a couple times in the last 20 years, so I can’t really compare the two. Almost all of my training is machine based.

[@blazefury8336]

Great review. I kind of wish I had bought the multipress over the levergym. I don't really use the pulley system at all on it after buying a dedicated lat/low pulley tower. I ended up pushing my levergym in a corner to save space blocking the pulley system. They really should add band pegs to the next version of the multipress though.

[@HomeGymHacksandReviews]

Thanks so much! If I could only one, I am taking the Levergym. Squats, Calf Raises, Viking Press, ability to detach the bench, and many more reasons.

[@stormlord3309]

Ha I’m not the only one to sell equipment and later regret it and re purchase it ! Always been a big fan of powertec and all the add ons .

[@HomeGymHacksandReviews]

If I had a big enough space, I would never sell any equipment. For example, I would still like to have the Valor Chest Supported Row to compare it to the Fettle…pretty much, any time I’ve sold something, I regret it at some point lol! Really glad to hear you like your Powertec equipment!

[@stormlord3309]

@@HomeGymHacksandReviews yeah likewise , if I had more room then I wouldn’t have to wheel and deal . Saying that I’ve just acquired the spare bedroom and treated myself to an incline t-bar row which works wonders when you have lower back issues ! Keep up the good content .

[@HomeGymHacksandReviews]

@@stormlord3309 big fan of the chest-supported t-bar row for the same reason. Congratulations on adding to the home gym and thanks so much!

[@brickmissing8295]

I was wondering why the bench slide slopes down towards the pivot. I realised it’s an attempt to keep the range of lever motion during shoulder press close to the horizontal to minimise the variation in load across the exercise range of motion. However the slope isn’t enough to completely offset the difference in the user’s shoulder height between flat bench and shoulder press - so the press will always suffer from a big load variation since the lever is angled way above horizontal. So while flat bench is good I think the shoulder press will be compromised as the load will vary by ~50% across the ROM.

[@HomeGymHacksandReviews]

I think the weight feels consistent throughout the entire range of motion of the exercise.

[@brickmissing8295]

@@HomeGymHacksandReviewsIf I remember my high school physics correctly - the downward force is max when the lever is horizontal, 50% at 45 degrees, and zero when the lever is completely vertical. So the sweet spot is +-10 degrees around the horizontal. However, it’s possible that a variable load may still feel good if it meshes well with your own strength variation across the ROM.

[@HomeGymHacksandReviews]

@@brickmissing8295 next time I do the exercise, I’ll pay closer attention and see if I notice a change in the resistance profile.

[@masonthomassax]

Maaaan… great review! Debating between getting either one of these, or a smith machine. A smith machine would be more versatile, but any of the smith machines in my budget won’t be built nearly as well as this thing is!

[@HomeGymHacksandReviews]

I would pick this over a smith. One, it has the unilateral option. Two, I can take a 45 degree grip. Three, can add the attachments. Four, cost less The smith might offer more versatility for the lower body. I will say, I no longer have a smith machine, but I do still have this.

[@masonthomassax]

@@HomeGymHacksandReviews thanks! Definitely gonna take that into consideration 🤘

[@ShawntreezyBreezy]

MC_Powertech!! Next up the Power tech neck tattoo, hell yeah

[@HomeGymHacksandReviews]

MC_Titan! lol! That would be the only choice.

[@Cambslondon1]

Could this be used as an alternative to barbell bench or as well as

[@HomeGymHacksandReviews]

@@Cambslondon1 absolutely.

[@Cambslondon1]

@HomeGymHacksandReviews also does the bottom seat pad adjust to an incline position like an incline only bench press?

[@HomeGymHacksandReviews]

@@Cambslondon1 it does. It has 4 positions. At some point in this video, I think I show the seat settings.

[@BasementBrandon]

Gonna need a bigger house!

[@HomeGymHacksandReviews]

lol! My wife is giving me her office, after that, you’re right.

[@babygiantbarbell1014]

Great video man! I hope your head is ok. I know I have smoked the back of my head on the Rep nameplate a number of times, and it isn’t fun! Both of these pieces are awesome.

[@HomeGymHacksandReviews]

Thanks so much, BGB! This ol’ head wound didn’t slow me down a bit; I vacuumed the gym when I got back from the ER and lifted chest, shoulders, and triceps the next day.

[@briand5047]

I noticed you said you went to the emergency room AFTER assembly was complete. That's hardcore!

[@HomeGymHacksandReviews]

lol! I didn’t want to go, but my wife, sister-in-law, and one of our friends who is a nurse forced me to go. I was ready to start using the equipment and getting the gym arranged perfectly.

[@briand5047]

@@HomeGymHacksandReviews Probably best to go. Too much blood loss interferes with getting a pump the next workout so going to the E.R. is also hardcore!

[@HomeGymHacksandReviews]

@@briand5047 well…when you mention it like that 😂

[@briand5047]

@@HomeGymHacksandReviews A joke but serious too. One of 1st times I went back and forth on a vid of yours, I said I donate blood regularly but schedule it based on deload week. Red Cross says can exercise 24 hours later. That isn't true if you train HIT. I donate blood the day of last HIT workout prior to deload. So slightly less often than the 8 week interval of blood donation.

[@HomeGymHacksandReviews]

@@briand5047 that sounds like a good strategy and timing for donating.

[@simoneorecchioni7352]

Unfortunately my English is not good and I don't understand if you prefer this machine or the Levergym. Powertec is not perfect but it feels like a homegym 😍

[@HomeGymHacksandReviews]

For pressing, the Multipress. As an all-in-one machine, the Levergym.

[@simoneorecchioni7352]

@@HomeGymHacksandReviews thank you for the reply!

[@fatboitino2]

I really want one of these. Been looking. Went with a cheaper option for now. But, someone is selling one locally- hoping for time to save up the funds to grab it. Leverage based machines have been immensely helpful in recovering from my pec tear. And it would be great to have at home. The windchill is -21 degrees Fahrenheit. Not a good time

[@HomeGymHacksandReviews]

Great to hear you’re recovering from that injury and I agree, the Levergym and especially this new model Multipress are easy on my joints and don’t cause the muscles any unwanted stress. All the best getting the machine; please let me know if you get it.

[@fatboitino2]

@@HomeGymHacksandReviews for sure💪🏽

[@Blitz88ITA]

the bar of the multipress is compatible with the levergym?

[@HomeGymHacksandReviews]

It sure is.

[@andyplace1785]

Awesome review. Thank you

[@HomeGymHacksandReviews]

@@andyplace1785 thank you so much.

[@Charlietales2022]

You need an elevator. I agree the lg and mp complement each over. Great review and you definitely got the updated multi press.

[@HomeGymHacksandReviews]

Thanks so much! An elevator would be nice! Yeah, it’s the MP20.

[@Charlietales2022]

@@HomeGymHacksandReviews I bought my mp in 2020. That must have been the year they changed the seat settings to 7. My mp has 5. Also have you tried deadlifts or partial deadlifts on it?

[@HomeGymHacksandReviews]

@@Charlietales2022 not on the MP. I feel like I would need to stand on the bench to make it happen. If your MP has the ring on the back, I’m pretty sure you have the newest model.

[@Charlietales2022]

@@HomeGymHacksandReviews mine has the ring on the back but the seat only has 5 settings.

[@HomeGymHacksandReviews]

@@Charlietales2022 hmmm. I just double checked mine to make sure I didn’t misspeak during the review, and in the highest bench position, I can see 7.5 holes.

[@Koga_]

I would really love to see machines like this with converging arms. As someone else in the comments mentioned, the non-converging arms are imho a deal breaker. Why would you say are none of the manufacturers in the "home gym" price range offering sth like this?

[@HomeGymHacksandReviews]

I think it’s starting to happen. Kaizen / Gym Pin and Crandall are two companies who are making it happen with rack-mounted lever arm options. However, I have yet to see any rack-mounted lever arms (even ones that converge) that look as natural as Powertec’s lever arms or that adjust as quickly and easily as Powertec’s. I don’t see the lack of converging arms as a deal breaker (although it would take it to the next level). For example, the barbell bench press (don’t care for) and push ups (which I love) are not converging exercises.

[@richardbonk9294]

I own an older model but I love it. Works great!

[@HomeGymHacksandReviews]

Awesome to hear! I had two of the older models and they always did me right.

[@patrickhaley1709]

Did you ever consider getting the powertec multi system? What are your thoughts on it?

[@HomeGymHacksandReviews]

I have considered it. I can see it being especially good for someone in a low ceiling basement. The Lever Squat on the multi-system is basically the same as the stand-alone machine which is rock-solid. The press is basically the same as the Multipress, but I would like for the bench to have the capacity to disconnect. I’m not completely sold on the Pulldown or using the Pulldown as a Tricep pushdown (although, I haven’t tried it for 15+ years. When I was building my most recent home gym, I considered all Powertec products and went with the Levergym over all of the other machines and, as you may know, I love the Levergym.

[@patrickhaley1709]

@@HomeGymHacksandReviews I know what you mean. I’ve wanted the multi system for years since I saw the old vids of Lee priest using it

[@HomeGymHacksandReviews]

@@patrickhaley1709 yeah, I remember those good ol’ Lee Priest videos in the Sam’s Warehouse.

[@jessiegadison2941]

I'm 6'3 with long arms/legs will this gym work for me?

[@HomeGymHacksandReviews]

Powertec regularly features someone who is 6’3” using their products; so while I don’t want to guarantee it, I’m pretty sure it will work for you. The bench and lever arms have a lot of adjustments.

[@brianmccrum299]

I’m 6’7” and yes it works for me

[@richardmalewski953]

Do they sell the leverage part minus the bench?.. that would be sweet

[@HomeGymHacksandReviews]

No. The Levergym has a detachable bench, but even then, the machine is not sold separate of the bench. The bench’s horizontal function is helpful for getting the correct position for a lot of exercises.

[@matijsvandeneijnden4066]

Hi! Nice review, thx! Can you give me the link(s) to the video’s where you show all the extra units that are compatible with the multipress? I’m considering a one-in-all machine. Thx!

[@HomeGymHacksandReviews]

@@matijsvandeneijnden4066 thank you. It’s a lot of videos - check out my Powertec Playlist which can be found on my main KZbin page. I also uploaded 2 new videos for this machine over the last two weeks, which may be helpful.

[@matijsvandeneijnden4066]

@@HomeGymHacksandReviews thx!!!! 💪🏼. Keep up the good work!

[@funshop1]

I just got this one and assembled it. In your review, you moved the seat very easily. The seat sliding feature on my unit is VERY, VERY hard to move. Is there a way to fix that? Or could it be defective?

[@HomeGymHacksandReviews]

I would need to see it to know for certain. It should be a pretty smooth adjustment, but it does take two hands.

[@funshop1]

@@HomeGymHacksandReviews Thanks for the quick reply! Are you saying a video of the problem is what is needed? 🙂

[@HomeGymHacksandReviews]

@@funshop1 yeah. It’s really hard to diagnose without seeing it, hearing it, etc. If you think it’s defective, I would also contact Powertec. But, you should have 4 wheels that are traveling along the horizontal track. I would remove the red adjustment knob and see how it travels just to make sure the issue isn’t with the knob.

[@iang8169]

I dont need the lever gym because I've already got stuff that the high pully system offers . But want to be able to sqaut If you put the bench on its lowest setting ,do the arms work for squatting exactly the same as the more expensive level gym ? Can you get low enough or do you end up hitting the bench first ? I'm assuming if you put the bench all the way up there isnt enough room to stand and sqaut so putting it down to the lowest setting is your only option

[@HomeGymHacksandReviews]

The lever arms’ attachment site is too low for a decent squat and the bench gets in the way.

[@bpham23]

Can you possibly do dip on it like you do on the levergym?

[@HomeGymHacksandReviews]

Not really because the bench gets in the way.

[@jmagnum15]

Is the multipress a better alternative to the levergym if I already have a powertec power rack and connected lat tower?

[@HomeGymHacksandReviews]

With the lat tower, I would say, “yes.” You would be missing calf raises, squats, lunges, viking presses, shrugs without the bench, and a couple other things the LG can do, but I would go with the Multipress based on your existing equipment.

[@KoolAidMan7981]

How would you compare this to the Titan version plate loaded chest press? I have the Titan and its arms do converge however the arms are iso lateral all the time and there is no close grip bench bar option.

[@HomeGymHacksandReviews]

I have not tried the Titan version. It looks decent, but without using it, I can’t give it a fair comparison.

[@charlesvisconti4278]

Quick question on the chest supported bench rows - what is the resistance curse like? I.e. is it heaviest at top or bottom of the movement? Thanks!! Great review as always

[@HomeGymHacksandReviews]

Thank you! It gets heavier as I pull.

[@keithornstead7559]

Don't need anything else for all-around 24/7 home bodybuilding but this 😄. Except maybe a battle rope for trimming myself.

[@HomeGymHacksandReviews]

Add the attachments and I agree with that 100%

[@GoreckiFit]

I considered this over my hammer strength piece but lack of converging arms made it a pass. I think this would be incredibly useful for someone with a small bedroom since it’s very versatile and at a great price point. Nice job on the review, probably whacked your head when assembling that piece or something whacked you on the head is my guess.

[@HomeGymHacksandReviews]

Thanks so much, Tim! Precisely a lot of versatility with a small footprint and that is exactly what happened to my head.

[@DrDeusExMachina]

The Kaizen adapters combined with the rogue trolley might work for you

[@GoreckiFit]

@@DrDeusExMachina I might look into it, I have a seated row and incline press right now in my gym.

[@KramF10]

I have a low ceiling, so I wonder if you could tell me the approximate height from the floor to the top lockout shoulder press position, so I can establish if it will fit. I can factor the weight plates myself afterwards. Conscious this is a huge ask, so don't feel obligated. Your content is great! I am looking to pull the trigger on this machine in the new year, I just have very finite space, so need to be cautious.

[@HomeGymHacksandReviews]

Thanks so much. The highest the lever arms will go is 75” For the overhead press, 60” is about all you will need.

[@KramF10]

@@HomeGymHacksandReviews is that from the floor to lockout with the bench just of vertical? Thanks for your help with this, really appreciate it. I'm in the UK, so returning something like if it turns out to not fit might be a costly mistake haha.

[@HomeGymHacksandReviews]

@@KramF10 75” is from the floor to the arm reaching as high as it will go, which isn’t a position ever used for one of the lifts.

[@KramF10]

@@HomeGymHacksandReviews understood, thanks again mate, really appreciate the info.

[@HomeGymHacksandReviews]

@@KramF10 glad to help. I hope you will like the MP as much as I do.

[@LoungeAct74]

Great review! In your opinion which is better..multipress or multipower (roller smith machine)? Thx!

[@HomeGymHacksandReviews]

@@LoungeAct74 thank you! I would take the Multipress over the Roller Smith - it costs less and comes with the bench. However, I have been using the Roller Smith a lot and like it a lot too. The Roller Smith takes up less space and I really like the Smith Bar.

[@LoungeAct74]

​@@HomeGymHacksandReviewsdoing the flat bench press do you think the angle of the movement trajectory is different between multi press or roller smith? I've some shoulder problems.. Many thanks!

[@HomeGymHacksandReviews]

@@LoungeAct74 slightly different. The Multipress moves at a slight arc while the Roller Smith is on a 5 degree vertical bar path. With the Multipress, I grab at the bend in the handle which I find very shoulder friendly (more shoulder friendly than a straight bar for me). For the Roller Smith, you can start in the top position. With the Multipress, you typically have to start in the bottom position, which can be harder on the shoulders. However, if you look at one of my recent KZbin Shorts, you’ll see a hack I’m using to start in the top position on the Multipress and Levergym.

[@Simonet1309]

I had the levergym. Sold it and regretted it. I now have the exact same isolateral multi-press bench which I find very versatile and great for a garage gym. BTW, All that gym kit, taking over bedrooms, taking delivery. Your wife sounds *&£(/=ing awesome!😂

[@HomeGymHacksandReviews]

She is definitely supportive of this hobby. She’s also coming around and starting to lift more regularly (she’s always preferred running over lifting, but her hip is healing up).

[@Simonet1309]

@@HomeGymHacksandReviews That’s interesting. My wife is a marathon and ultra runner. I have often nagged her about how she should cross train! She is now starting to use the PT multi-press as she feels that it is safer and more versatile for her than a bar bell and plates. Which it probably is. PS. Love the channel and greetings from the UK

[@HomeGymHacksandReviews]

@@Simonet1309 really good to hear you and your wife are happy with the Multipress. It’s always great to get feedback from either people who have it. Also, it’s great to hear your wife is adding in some weight training too. Funny you feel the same way I felt about selling the LG. As soon as that truck pulled out of the driveway, I asked my wife, “What did I just do?” Thanks so much for checking out my videos almost 4,000 miles away. I’ve been to the UK and loved it.

[@martinbarak6903]

hallo,I also received the multipress last week. Unfortunately, mine has a few scratches and small paint defects. Was the paint ok with yours or did you have a few paint defects? Thank you

[@HomeGymHacksandReviews]

The paint job looked good and was scratch free. Was the touch up paint included in one of your boxes?

[@martinbarak6903]

@@HomeGymHacksandReviews Yes it was included. But its a new Product. I will ask Powertec. Thank you! Greets

[@HomeGymHacksandReviews]

@@martinbarak6903 sometimes the carriers are really hard on boxes. Hopefully, it’s an easy part / piece to replace.

[@mws12345]

Hey Dude I'm sorry to bother you, but do you have a hack to do a barbell row with the powertec lever gym? Can I attach something to the lever arms and lower them all the way down or something?

[@HomeGymHacksandReviews]

Yep. It feels pretty effective too. I show standing rows in my first Levergym video. It also works great if you attach the Angles 90 Grips to the handles.

[@mws12345]

@@HomeGymHacksandReviews Ty

[@rexcolt7203]

doesnt the levergym feel better on incline presses due to the higher place of the arms

[@HomeGymHacksandReviews]

I don’t think there’s a big difference between the two.

[@maximumgear]

Ever figure out a way to use bands in this for any of the exercises?

[@HomeGymHacksandReviews]

Dumbbells can be used to secure the bands. I show this in one of my older videos, Powertec Levergym Hacks 4.

[@maximumgear]

@@HomeGymHacksandReviews thanks! I knew I saw it in one of your videos but I looked back through a bunch of them this morning and couldn’t find it 🤦🏻‍♂️. Thanks!

[@HomeGymHacksandReviews]

@@maximumgear glad to help. Hopefully it works well for you.

[@Blitz88ITA]

hope they will release soon a new model that remove that ankward pin for the seat, and adopt a built-in system like the new atx bench for their multipress/levergym.

[@HomeGymHacksandReviews]

@@Blitz88ITA I would like for the bench’s adjustments to be more streamlined, but I really like how adjustable the bench is. For example, sliding the bench back one or two spots can take a press from good to great.

[@orlandopozos5119]

Brother, excellent review! I was really considering to get the Fettle ISO lateral chest press but seeing this is making me doubt now as this is way more versatile with all the incline/decline positions. Which one do you like more ? Thanks 🙏🏼

[@HomeGymHacksandReviews]

That’s a touch call. For the flat press, the Fettle because of the converging arms. However, the Multipress, like you said, is much more versatile. The Fettle is a commercial machine, whereas the Powertec is a residential machine and it’s about 1/2 the price of the Fettle.

[@orlandopozos5119]

Thanks for your quick reply man! One more question, and sorry if this sounds dumb but what are the benefits of having converging arms? Thanks! And Happy new year ! Keep up with the amazing videos!

[@HomeGymHacksandReviews]

@@orlandopozos5119 thanks so much! By converging, the chest gets a more thorough muscle contraction.

[@freskimb3996]

Would love to see a powertec leg press attachment review

[@HomeGymHacksandReviews]

I am working on something now (which I’m still on the fence about uploading), but I don’t think Powertec sells it anymore.

[@bmwofboganville456]

Can the Powertec Multi Press be used with the Ironmaster bench? TIA

[@HomeGymHacksandReviews]

No…the Multipress is a single machine / the bench doesn’t disconnect.

[@scottpater]

Would the multipress be a better option over Levergym if I’m getting the SFT too?

[@HomeGymHacksandReviews]

That is a very tough call. The LG is a high / low pulley and it can be used for a lot of leg exercises. I love squatting on the LG with wedges or converting it into a pendulum-like squat. But, for purely pressing, the flat press in particular, the Multipress is the better option. Check out a few of my KZbin Shorts to see how to enhance the SFT.

[@SaiRose15]

If you set the bench to the decline position, do you think you can do front squats facing the arms and using the close grip bar?

[@HomeGymHacksandReviews]

@@SaiRose15 it really doesn’t work well. The lever arm attachment site is too low for Squats, the bench gets in the way, and because of the bench, too wide of a stance is required.

[@SaiRose15]

​@@HomeGymHacksandReviewso thanks for your response

[@SaiRose15]

​@@HomeGymHacksandReviewsI got this multipress in Wednesday 9/18. I can do front squats facing the machine using the close grip bar. I'm 6 feet tall and standing on plates it gives me a good range of motion. It's like doing a front squat/box squat to just below parallel. Also love that my landmine swivel fits perfectly snug into the attachment tube opening up even more options.

[@HomeGymHacksandReviews]

@@SaiRose15 very good to hear. Thanks so much!

[@tulio3571]

Hi there , can i use non olympic weights ?

[@HomeGymHacksandReviews]

Powertec sells standard posts so, yes, you can swap the Olympic Posts out for Standards.

[@joemullen8453]

Great review as usual. I would definitely love if they would add a side lateral attachment. Do you know if they are considering it?

[@HomeGymHacksandReviews]

Thank you! I have suggested it, but I don’t know if anything is in the works. I think it would be a big hit!

[@user-tb2vc3gd5w]

Are you familiar with ATX (formerly Megatec)? They have German-engineered competitors to powertec, which have a much higher build quality (especially the multi-gym). If you are familiar, do you know if people are able to get them in North America?

[@HomeGymHacksandReviews]

I am familiar with ATX, but I’ve never used any of their equipment. I’ve never seen an ATX piece in the US.

[@rotemrock4774]

Levergym back awesome

[@HomeGymHacksandReviews]

Glad to have it back! Thanks so much!

[@jamestonbellajo]

Great review! Could you put a link to where you got those numbered stickers?

[@HomeGymHacksandReviews]

Thank you! I have a link to them in my Amazon Affiliate Store / Linktree

[@HomeGymHacksandReviews]

Just make sure to get the .4” stickers and not the 1” stickers. The 1” stickers are too big for the LG. The stickers don’t always peel right, so it may take a couple sheets.

[@michaelbulger1947]

Curious to know if you kept the Rhino?

[@HomeGymHacksandReviews]

Oh yeah. I have a video showing everything I sold and everything I kept, “I Sold 1/2 Of My Home Gym Equipment.”

[@Marlon2305]

Any hacks for the bench multipress?

[@HomeGymHacksandReviews]

I haven’t spent a lot of time trying to hack this machine. Turning the other way offers a new press variation. I also added spacers on the pin of my old MP to better find the correct setting for the lever arms.

[@Marlon2305]

I just ordered one! Now debating g if I should buy the leg extension. I would love to see more ideas for this workbench multipress.

[@HomeGymHacksandReviews]

@@Marlon2305 awesome! I hope you like it. The Leg Ext is a nice addition.

[@josepholiveros4115]

Did you buy the pec fly machine ??? I would love a review

[@HomeGymHacksandReviews]

The Powertec Pec Fly Attachment? If so, I reviewed that about 1.5 years ago. Thanks so much!

[@orlandopozos5119]

Do you know if the pec fly attachment is compatible with this workbench multipress?

[@HomeGymHacksandReviews]

@@orlandopozos5119 it is compatible.

[@iang8169]

Currently I mostly use hammer strength machines in the gym, and they all have converging arms for presses.. In the power Tec multi press price point all the product s don't have converging arms but in the cheaper 250 -350 price point ( valor , sidee, etc ) they do all have converging arms .since you've used both , I'm assuming you feel the advantage you get from converging arms is so small that you want to stick to the power Tec level equipment and not try the $250-350 price point product s that have converging arms . is that correct ?

[@HomeGymHacksandReviews]

I’ve only had one Valor machine and sold it within a few months. I had the Fettle Bench Press Machine which is basically the same as Hammer Strength, and I liked the Multipress better. I have a video called my Top 2 Machines / Exercises for Every Muscle Group and the Multipress came out ahead of the Fettle. There is absolutely value in converging arms, but the Multipress’ adjustability and versatility is why I like it better.

[@iang8169]

@@HomeGymHacksandReviews thankyou

[@CapUnlimited]

@@HomeGymHacksandReviewswhy do you prefer the powertec over the fettle

[@HomeGymHacksandReviews]

@@CapUnlimited more versatile, more adjustments, and when I’m doing a flat press, I prefer to be supine.

[@CapUnlimited]

@@HomeGymHacksandReviews ok thanks a lot does the powertec feel similar to barbell benching

[@Marlon2305]

Do you think you can squat with the multipress?

[@HomeGymHacksandReviews]

No. Unfortunately, it wouldn’t be a quality exercise…I tried on my last model and never found anything I would want to perform over the course of weeks and months.

[@corysgym4530]

Great video!

[@HomeGymHacksandReviews]

Thank you!!!

[@joelmcdaniel2343]

Does it build biceps????

[@HomeGymHacksandReviews]

While it’s not really meant for biceps, it will work. One of my recent KZbin Shorts shows a hack with daisy chains for a bicep exercise and the Tricep Bar can be used for Drag Curls. I recommend adding the Preacher Attachment to the bench.

[@Disclosureclips01]

Can you squat on this ?? I just purchased it

[@HomeGymHacksandReviews]

I don’t think squats works well on the Multipress. The lever arms’ attachment site is too low and the bench gets in the way.

[@vincentnicoletti]

Is this the newest model?

[@HomeGymHacksandReviews]

It is.

[@outtrigger]

why did you have to go to the ER?

[@HomeGymHacksandReviews]

I go into a little more detail in my video, “Building My Powertec Spare Bedroom Gym,” but I was finishing assembly on the Levergym and the lever arms swung down and hit me in the back of the head.

[@pedronavas213]

We need a vídeo comparing the multipress and the levergym.

[@HomeGymHacksandReviews]

Thanks so much. I tried to include quite a few comparisons between the two in this video without taking the focus off the Multipress. I will definitely have a future video comparing the two further.

[@elba9444]

It looks like the handles are positioned too near your shoulders, in particular if you are tall.

[@HomeGymHacksandReviews]

I’ve read quite a few reviews for this machine and I haven’t heard that being an issue. Also, Powertec shows one of their athletes who is around 6’2” using this machine and it looks like it fits him well. Hopefully, someone who has this and is over 6’ can chime in.

[@elba9444]

@@HomeGymHacksandReviews thank you for the answer. Anyway great video and explanation as always 💪🏻

[@HomeGymHacksandReviews]

@@elba9444 thanks so much!

[@pgs4870]

Anyone tall tried this? Im 185 cm (i think its 6'1 in american xD) im interested in buy this, but kinda afraid it feels awkward to train

[@HomeGymHacksandReviews]

6’1” will be fine. I hope a few people who are your height will reply to share their experience.

[@zacharypower3292]

I have one, am 183 cm and find nothing awkward about any movements. Arms don't bottom out on chest supported rows, although it is close.

[@HomeGymHacksandReviews]

@@zacharypower3292 thanks so much for the reply.

[@brianmccrum299]

I’m 6’7” and it feels good to train on it. It’s actually nice because the bench is higher off the ground than a standard bench, so for those of us who are tall it works. I bought it from someone who was selling because they were shorter and the bench height was too much for them. Couldn’t get any leg drive.

[@HomeGymHacksandReviews]

@@brianmccrum299 thanks for the info…that is very helpful. I think I showed in this video how to get leg drive for people who are shorter.

[@naodman2734]

Hello how are you please help me WB-MP13 dimension please tell me my frend full dimension

[@HomeGymHacksandReviews]

Dimensions (L x W x H): 77.8" x 55.6" x 41.3"

[@oooo5072]

Another Levergym??? You have a problem 😅

[@HomeGymHacksandReviews]

lol! I guess you could say that, but a lot of this equipment is largely to keep the reviews flowing. I could easily get by with just the Levergym or IM 2000, or even a set of dumbbells and the Rhino.

[@warriorpower5528]

would you be able to do skull crushers on it with the bar?

[@HomeGymHacksandReviews]

I just went and tried and, yes, it works. I tried facing the lever arms and facing away and both work. Facing away from the lever arms felt more like a JM Press and I had my lower body off the bench.

[@warriorpower5528]

@@HomeGymHacksandReviews sick! 👍