The procedure for making carbon fiber aircraft ribs part 2 of 3

The procedure for making carbon fiber aircraft ribs part 2 of 3

[@dundas9222]

Your a craftsman!

[@stevewhite3083]

second video of yours I've have watched, short but so much information

[@omegaman3593]

Great content and methods for constructing CF ribs

[@99kevin99]

Pure genius...pure genius.

[@foesfly3047]

You have so thoroughly developed this process, the tooling and every method involved. It’s a wonderful thing to see ♠️♠️♠️

[@Tracks777]

lovely content

[@flyingmonkey3822]

What’s the name of the red tape? I know electrical tape somewhat resists resin sticking

[@ejb_channel]

Can I apply as your apprentice?

[@lorenzofedeli5611]

Why you not use a mask , your epoxy is not toxic ? What resin is using?

[@foesfly3047]

I’m pretty sure he’s using Total Boat brand 5:1 (or very similar ratio) epoxy resin, which is very similar to West System epoxy. You don’t want it in your eyes and it’s best to avoid skin contact. But most epoxy resin vapors are not nearly as harmful as those produced by polyester and VinylEster resins. Reasonable precautions such as working in an open, well ventilated area, and staying arms length and upwind of the work is usually considered enough. But make your own decision on this as there are some who disagree.