The proper way to install race harnesses - step by step

  Рет қаралды 8,701

BimmerWorld

BimmerWorld

Күн бұрын

Пікірлер: 8
@McR45
@McR45 Жыл бұрын
The amount of information you guys provide in your videos is awesome.
@milliebays1801
@milliebays1801 4 ай бұрын
Thanks for the vid. Does the schroth sub belt design with the kinks do anything for comfort?
@christoph7395
@christoph7395 10 ай бұрын
Great video! Well done.
@JohnBauknight
@JohnBauknight 4 ай бұрын
Great video. How do you install the Sub belts with the adjustable seat slider? If mounted to the floor or non-moving bracket, wouldn't the sub belt need to be re-adjusted for drivers of different height? We have drivers of different heights on our team and looking for a safe solution for the Sub belt without having to adjust because it will be under the seat. Thanks for any suggestions.
@BimmerWorldMedia
@BimmerWorldMedia 2 ай бұрын
We definitely don't recommend an adjustable seat slider in a dedicated track car if you can help it. The sub belt is absolutely a problem due to the length needing to be different when the seat moves as you mentioned. Theres no correct way to short cut this other than readjusting the most difficult to adjust belt with every seat movement. I know people don't do this though so what happens is either the taller person usually ends up with a sub belt far too high on their body for proper use. Some have used a cross bar that attaches to the seat slider so it moves WITH the seat and the length stays the same, but its also not the safest route. No short cuts should ever be taken with harness installation/safety.
@martynrudd6070
@martynrudd6070 Ай бұрын
he didnt explain the front 2 fixing points which angle or where to fit them like he did with the side ones????
@jonnyb2532
@jonnyb2532 4 ай бұрын
This would be a lot better if you used a real car.
@BimmerWorldMedia
@BimmerWorldMedia 4 ай бұрын
Yea, we thought of that as well, but too many cars have too many differences so we tried to cover the basics that apply to just about anything you'd be installing harnesses into. Also very hard to get proper views with a camera of the areas down beside a seat. The only differences would be mounting locations for your lap and sub belt depending on the chassis, but the rules still apply the same. If you ever had any questions in how to install harnesses always reach out to the professionals to answer your questions. We'd be happy to help and with something like race harnesses its best not to have any doubts!
SCHROTH Training #1 How to Wrap Your Harnesses Correctly
6:30
HMS Motorsport
Рет қаралды 312 М.
Best Race Harness? Lifeline Copse FIA 6pt - But why...
7:08
BimmerWorld
Рет қаралды 2,5 М.
Каха и дочка
00:28
К-Media
Рет қаралды 3,4 МЛН
It works #beatbox #tiktok
00:34
BeatboxJCOP
Рет қаралды 41 МЛН
How to Install Racing Seats
21:30
ChrisFix
Рет қаралды 5 МЛН
Don't Waste Money On The Wrong Dampers/Shocks. PS: Don't Call Them 'Shocks' Either.
12:01
UPGRADING Our BMW M2 to the NEXT LEVEL!
13:26
Misha Charoudin
Рет қаралды 68 М.
$450 Racing Seats vs. $900 Racing Seats | HiLow
13:01
Donut
Рет қаралды 2,9 МЛН
6 Point Harness Install in the FRS
8:20
Kevin Vo
Рет қаралды 22 М.
REBUILDING A PORSCHE 911 GT3RS FROM SCRATCH
45:52
Mat Armstrong
Рет қаралды 3,1 МЛН
Supercharged MX-5 - Is the BBR MX5 worth it?
9:31
Our Tim
Рет қаралды 57 М.