THE PROPER WAY TO REPLACE OLD ANGLE STOPS

[@MrBean1100-v1w]

Thank you !!! I'm a young 22 year old male. Learning plumbing from drains first and sprouting my knowledge from videos like these. I've been doing drains for 2 years and always wondered how you replace those.

[@1951Roy]

Thanks for sharing, new plumbing tool tricks with us. I have to place mine soon. 24 year old house.

[@PLUMBINGWITHTIM]

Take care

[@plumbbuild6517]

Great video and pointers thanks for taking the time to record your work. As a plumber - tile - builder man I appreciate your videos.

[@PLUMBINGWITHTIM]

Thank you my friend.

[@everythinghomerepair1747]

I always enjoy these real world videos that show how things actually work in the field. Thanks.

[@javiergalvan242]

Another great video Tim, remain blessed and keep the video's coming ☝ 🙏

[@PLUMBINGWITHTIM]

Thanks for watching

[@jofromnyc]

Thank you this was very helpful for my project.

[@fidelindigenousbrother6612]

Very helpful video I really loved it

[@shovelhead8]

Thank you for the lesson, Tim. Stay safe and stay warm/cool/dry

[@PLUMBINGWITHTIM]

You too Sean thanks and take care

[@ernestoescamilla4751]

Thank you for the knowledge Awesome!!!! Good man 🙌👏👏👍

[@realSamAndrew]

2 questions please. What is the purpose of tapping on the valve while heating it up? Also, why not install new 1/4 turn valves? Thanks.

[@randyriggs5463]

I do the same thing. Gut the angle stop, sweat it off,and replace escutcheon if you can. Then replace angle stop with compression type! Good job 👍

[@PLUMBINGWITHTIM]

Thanks for watching

[@andresdelacruz604]

Great video SR thanks

[@honolulu1476]

What camera do you use ?

[@PLUMBINGWITHTIM]

My iPhone 12 plus lol

[@johnsutter1497]

Do you have a video on how to take off a compression valves?

[@louietheplumber3609]

Any thoughts on slowing down

[@denniscordova9920]

I just did the same thing today. So smart removing the stem, much quicker because you don't have that water built up.

[@adamhicks5550]

How long house been empty unoccupied

[@charlescoates5761]

Hey Tim they make a wrench with 1/2 x 3/8 ends that screw onto those threads for the supply lines it's a Pasco #4525 that's what I use

[@tannerwest6823]

Very knowledgeable

[@TheSlipperyNoodle]

Great video.

[@Hvac-dude]

Hey Tim how do u know when a hot water heater is filled and ready to turn on !!

[@PLUMBINGWITHTIM]

When filling the tank make sure you have a faucet open on the hot side When the tank is filled up the faucet will start running

[@Hvac-dude]

@@PLUMBINGWITHTIM thanku tim !!!

[@adrianmorales7396]

Mr. Tim good work 🇺🇸🇺🇸🇺🇸 If you don’t mind me asking how much do you charge for replacing shutoff valves? Thank you in advance for your time and keep Plumbing my amigo 😎

[@geoffjohnson6555]

great video, thanks

[@ginoa1663]

Hey Tim, what other way or tool can you use to take off the old ring without the blowtorch? Thanks! Great video!

[@everythinghomerepair1747]

You can use a tubing cutter if you have enough room. Also, you should consider rebuilding the valve with a simple kit they sell at the store. That way you don’t have to remove the valve at all.

[@DrainMedic]

Use the same torch and wrench good stuff (Shelly)

[@williamstewart1883]

That wrench is a God send for those 90 compression valves.

[@armandomadrigal9793]

when the copper pipe stub out is long i just cut the pipe and install the angle stop without taking the angle stop apart

[@thefloridaplumber2631]

I second that angle stop wrench. You can used it to take shower heads off and compression coupling.

[@tomdale1313]

Tim you seem to be a tool guy, purchase a pair of Douglass pliers p-813 10 inch a great str jaw pliers that are made for plumbing tasks

[@Ryanrock2]

Douglas channel locks are the best!

[@chrispixx]

How is that drain pipe not leaking where it goes into the wall? It looks like there's a plastic nut missing, it could be glued but there are clearly male threads in plain sight.

[@PLUMBINGWITHTIM]

Someone glued it in lol

[@Ryanrock2]

Should have replaced the escutcheons

[@iranewton8416]

Great job Tim, Nice time to also change out the escutcheon if you have them. Clean and sand is a great lesson so that the Ferrell can bite into the pipe and if you Would rather use a shark bite angle stop.

[@PLUMBINGWITHTIM]

Thanks for watching

[@Patriot6421]

Why don't you leave the knob on the angle stop and just turn the packing nut. This way you can use the knob to turn it if it's seized alittle. Just my thought as a useless motion.

[@PLUMBINGWITHTIM]

Thanks for watching you are right More efficient of a job your way 😉

[@ryandelaney4320]

If you’re a KZbin plumber, you better look out cause you’re gonna flood some s**t. This is just a warning all you people with your comments so obvious you don’t know Jack just be careful. (you don’t know what you are doing)

[@user-br3ou2cs9o]

Have you used or have any thoughts on sharkbites brass push-to-connect valves vs soldering/brazing? Have you used or thought about adding an induction heating tool to your tool kit for copper soldering/brazing vs flame? kzbin.info/www/bejne/kJXEhZWZfL6tnbM

[@rickkelly1241]

Why not just put on MIP's with threaded stops? Not my job. Your job. Your call. Just wondering...

[@richardzepeda2220]

You do all that and don’t change the chrome flange there only 20 cents more

[@Resist_JWO_1984]

It's a shame that in order to save yourself 20 cents, you're not using quarter turn. 👎

[@greencolombiano]

Could have just replaced the guts on the old sweated valve why change for compression ?

[@spectraldrew]

Never cool your hot valve in the toilet bowl, especially with that little water. I have seen a fellow plumber do this and it caused a crack in the toilet. Be a little more careful please, these videos are formatted as how-to videos and I quite enjoy your channel. At least issue a disclaimer.

[@revydoer1478]

dope and tape is unnecessary on the threads

[@plumbbuild6517]

I use megaloc on my treads and ferrel and you could say it unnecessary but , it lubricants it and keeps it from binding and seizing. I didn't use to use megaloc but I learned from another great old timer plumber many years ago. If you try it you may continue using it.