The REAL Story Behind Identical Looking 80cc Motorized Bike Engines- Engine Teardown

[@jimjensen1096]

Thank you for the breakdown, very useful!

[@DogsaladSalad]

I love my wildcat. Runs like champ. Seriously a great motor

[@TheNightmare217]

Mo power baby 🍼

[@althomas7977]

As of 12/7/24, I can't find the one piece cylinder/head motors on Ebay, so I was surprised to see this video. Will look for a link provided by you.

[@darnelljackson233]

Is there a way to get the one piece cylinder without buying a new motor?? If so where can I get it? Thanks in advance

[@althomas7977]

I just checked again and I can't find the one piece cylinder/head motors anywhere on Ebay. I have been using one for more than three years with no problems, but I don't treat it rough.

[@DontCryAboutIt]

Just because something is heavier doesn't make it better or vice versa E.G titanium vs carbon steel.That said your point is proven .

[@neoboost6377]

Yeah, especially a heavier piston isn't really desireable, even though here the wildcats one is probably higher quality.

[@zsfabricating]

@@neoboost6377 the fraction of the ounce of weight difference I believe is attributed to the pins on the piston, which are not well seated on the lower quality piston. This means that the low quality piston is more likely for the pins to fail and cause the top end of the engine to have a catastrophic failure.

[@dustinandtarynwolfe5540]

Ive never once seen one of these engines in any trim be something i was impressed by. They all seem like they were engineered and manufactured in pakistan on a dirt floor.

[@ManiacRacing]

Grubee GT5 engines used to be the best standard chinadolls, mostly due to Don Grube spending a lot of time in China overseeing production. His biggest problem was keeping the chinese factory from substituting lesser quality parts to increase profits. Nowadays, Olyin seems to be one of the best around....but china is gonna china, so I ALWAYS go through any new engine before use.

[@zsfabricating]

@@ManiacRacing if you haven’t tried California motorbikes yet, you should give it a shot. Quality is the best out there anywhere in the price range

[@Scottaaa]

Id like to get a wildcat pk80 so thanks for the review

[@bigjay6743]

The bottom ends lighter plus it doesn't even have balanced crank And I've balanced a few of these and you take out quite a bit of material.

[@TheShivABC]

Put a 5lb weight on the scale then zero (the tare button) it, then put the engine on the scale, take the number from the scale plus the weight you added to get the weight of your engine

[@zsfabricating]

@@TheShivABC thank you! I recently bought a scale good up past 50 pounds and was able to determine that the engines weigh about a pound different, around half of this weight difference is from the heavier bottom end with the slightly larger flywheel and denser internals and the larger surface area on the cylinder/cylinder head made up the rest of the difference in weight. Thanks for your comment.

[@TheShivABC]

@@zsfabricating No problem, I'm a small engine mechanic, this cheapening of engines is everywhere, kohler engines is about to fold under

[@pawe7789]

I have wildcat mixed with Amazon - Ebay version lol

[@razor1uk610]

This video is a perfect insight and description of the CCP's/PRC's manufacturing 'quality products' for Amazon's & Ebay's recommended/sellers sales advertisements. Spread the word, don't be fooled by CCP technical & mechanical 'quality' products, whenever possible, avoid.

[@zsfabricating]

Yes, better to buy through American company like California motorbikes that can set standards and do thorough quality control before anything gets sent out.

[@dustinh4175]

The flying horse is an odd ball

[@carlosoruna7174]

The chineese use cheap conponents as specified by their customers.. Look at tolerences, bearings, thats where the game is ..

[@zsfabricating]

Exactly. The eBay/amazon engine sellers don’t have strong brand loyalty, therefore their goal is to get the price absolutely as low as possible, as they aren’t worried about return customers and want to maximize profit. The wildcat engine is made in a different factory with a higher quality capacity and is also set to a higher standard. The truth is, with Chinese manufacturing really low or really high-quality can be achieved, it depends on the price required for the market. For some people, saving $30 may be something they’re willing to do, but in the long run you don’t save money and you have to deal with a low quality engine having constant issues, unreliability, and lower performance. These engines now having the smaller flywheels to save money is basically a nail in the coffin, as people might be willing to tough out low quality but when it comes to even having to deal with a slower engine, people don’t want to deal with that. It’s just not worth the savings.

[@mi_rx7]

Fun fact, this Chinese engine, copy of USSR engine д6/д8. And i use piston and cylinder from Chinese engine to repair my soviet moped riga 13

[@masterhacker1989]

Gasket thickness has shti to do with shit

[@zsfabricating]

@@masterhacker1989 first of all it’s an indicator of quality. Secondly, the crank case gasket will blow out in that weak spot within a few weeks and all your crank case pressure is gone and so is your performance. Also, when you want to work on the engine, the gaskets will rip when you try to takeoff your covers.

[@TheNightmare217]

I have both motors this is my 4th build.. my first bike leaked at the bottom right where he showed. The other gasket looks so much better along with everything else 100 miles in still looks relatively brand new

[@jeffbrinkerhoff5121]

Bought one years ago, watched it disintegrate.. Chinese motor, bike by Schwinn... Ride it out, push it in...

[@CharlesC-c8z]

AND YOU FAIL TO MENTION ON PURPOSE SO YOU CAN MAKE UR LITTLE MISINFORMED VIDEO THAT ONE IS A 80CC AND THE OTHER IS 49CC COME ON MAN

[@zsfabricating]

@@CharlesC-c8z no. They are both 80/66 cc. You can see in the video that the size of the pistons is exactly the same.