How to Install a Minarelli Vertical Cylinder on your Motorized Bike Engine

[@LAHover]

Looking forward to trying one of these kits in the future. Thanks for posting this video :)

[@teepee2090]

I'm on ur KZbin LA that would be cool to see I talk to his dad on Facebook bike group

[@mozezcen-valley7555]

There fun u should

[@traymoney8989]

I wanna buy a complete motor

[@halethewhale]

Hey bro what clutch pads have you used previously in this engine? I noticed you have made the holes for the pads larger I just wondered whats a good replace over stock, thanks 👍🏻

[@vanderley43]

Quero comprar como eu faço?

[@jerryb1234]

Nobody has done a video series yet about the longevity of these expensive parts, normal riding, not just racing that is.

[@kjsmolik]

They are much more reliable than normal china cylinders

[@evanknight3629]

I have no experience with running a minerelli top end on an 80cc bike but I know when they are on the scooters they are designed for they are very reliable, you could easily use a cheaper kit also I think naraku has one pretty cheap

[@DirectCurrent4u]

Great video! Your products are awesome! I really appreciate you taking the time to make these videos for us to better the performance of these bikes! 👍🏻

[@thewonderfulwizardofcodsaq3472]

The minarelli jug at the ware house getting packed: wow I can’t wait to see what kind of sick zuma im gonna be on Minarelli being installed: well this isn’t what I had planned

[@rogerstafford-wakeinc.2088]

Still waiting for the engine. I want from you guys. That’s a proper definition of being a lower crank case but either way it was 6-8 months now. Kind of sucks my brother just died and I was really waiting around that thing.

[@JonnyDuzzit]

Hell yeah! Im over here working on my horizontal mina and looking at my MTB thinking if a mina vert adapter exists for a bike engine. I need one of these kits!

[@2bit2strokes38]

Nice! I'm definitely going to upgrade to one of these in the very near future.

[@jeffwalters6044]

I like my chinarelli

[@2strokecarbtuningportingin187]

Great vid

[@sleepered7692]

for which reason you dont put the base gasket under shim and cylinder ,because better seal whit grey stuff thanks

[@garagerebuilds1604]

Another great video u are very Knowledgeable about these little China girls keep up the great work u do I am thinking about mine upgrading to that

[@rylibritton8406]

could i put this on a bt100?

[@whatsyurprob158]

Where the studs screw into the bottom, did you use any loctite ?

[@jeromecabral192]

Will the carburetor that is used for this type of engine work for the zeda 66 cc high performance engine?

[@kennethmeese]

Just wondering why you don't use any oil or assembly lube in the cylinder or bearing before putting the piston in. Is dry startup, not a concern?

[@whatsyurprob158]

That exhaust adapter part >>>> will it fit an expansion that's not a Minarelli? I just purchased the Wildcat Ultra kit from CMB yesterday, and, I have a very lot to learn >>>> like that exhaust adapter so I'm not limited. I'll be checking you put.

[@davidrussell8918]

No assemble lube ?

[@nicolaslefebvre9699]

no gasket between the spacer/cylinder?

[@bartonbrown4172]

I’m new to the motorized bicycle world - regarding the Minarelli Vertical Cylinder kit, I have some questions: 1. What motor does the Minarelli Vertical Cylinder kit fit on? 2. How much does the Minarelli Vertical Cylinder kit cost, and do you also sell the complete motor with the Minarelli kit installed? If so, how much is it? 3. I plan on mounting the motor on my Cannondale aluminum-frame road bike, which has a down tube 51mm in diameter, and a seat tube 32mm in diameter (the two frame tubes to which the motor would mount). Would these dimensions present a motor mounting problem? 4. Dumb question of the month: my Cannondale has a 3-chainwheel front (bottom bracket) gearset, and a 7-cog rear wheel hub gearset. Has anyone successfully mounted a gasoline motor in the Vee of the tubes, and still managed to use the derailleur gears of the front (bottom bracket) gears and/or the rear wheel hub gears? Thanks - your videos are the best on the subject on KZbin. Bart Brown

[@mystealthlife6991]

Will this fit in a OCC Stingray?

[@Austin.1390]

can you use a belly pipe exhaust meant for a mororised bike

[@SherryHeim-xv8ne]

Why was a squish gap not mentioned?

[@roybray8741]

Can I put this on a bbr stage 4 kit I Wana buy a kit for it

[@EastCoast5066]

Hey would like to buy one of the engine builds that u did in this video..exact same if u have one build and ready to go..just need to know what the price is?

[@pelotamendes6223]

Sends to Brazil? I work with a Phantom v3 now, and looking for an upgrade. Im almost installing a Honda 100cc there, but its 800usd here, so expensive XD

[@gsxrsht5613]

You should get the stage 6 big reed intake and a 21mm SWR PWK, I would love to see how much power it would make

[@smolikperformance3867]

I have a stage6 big reed already, will be getting more carbs as well

[@gsxrsht5613]

Can't wait to see it, I build these scooter and can see the power they make, I'd definitely recommend a pwk 21, on the pre bugs that the best carb for a 70cc set up

[@gsxrsht5613]

Also for the vertical minarelli I highly recommend the Black Trophy cylinder on scootertuning.ca

[@smolikperformance3867]

@@gsxrsht5613 thanks for then info. I have ran the black trophy, performed well

[@mozezcen-valley7555]

How fast do thay go 50cc ?? All stock just basic

[@smolikperformance3867]

With a 40t it will go about 40mph, 36t will do 50mph

[@mozezcen-valley7555]

@@smolikperformance3867 thanks just can't belive 4 teeth changes 10mph

[@mozezcen-valley7555]

Is the 70cc a lot faster

[@smolikperformance3867]

@@mozezcen-valley7555 70cc is a bit faster. 55-60mph with a 36t. Its overall power curve is much higher, especially down low.

[@mozezcen-valley7555]

@@smolikperformance3867 yes I'm thinking to do a 50 mile per hour bike build very soon going to try to put it on a board track replica bike I build parsley rear end is stock on a late 40s bike ,

[@roybray8741]

Where is ur link to buy stuff

[@pewpewbbqs]

Recommended exhaust?

[@lucianlucian1116]

I could mount an 80 cylinder and piston on a 100 engine because in Romania there are no 100 cylinder and pistons, I want to point out that it fits in holes only that the 100 cylinder and piston is 50 mm and the 80 has 47mm? .

[@I.H.D135]

Great video

[@jonathanguillory8321]

That's good looking motor

[@djodjodubois9458]

What the cc motor?? The head motor your compatible niome 100??..end me motor guizmo 80cc..clutch jamed..very very jamed what i rebuilt clutch very jamed??

[@smolikperformance3867]

This is a standard 66/80cc bottom end.

[@cameronramirez8447]

What clutch is that

[@haydn5754]

if i were to buy this, where would i go about getting a good quality VM20 carb?

[@smolikperformance3867]

Treatland.tv

[@ericbonapartesr6384]

How do you buy one with everything I'm looking to buy can you send me a link

[@smolikperformance3867]

Smolikperformance.com

[@ericbonapartesr6384]

Thanks for the help man I found it I will be ordering one

[@rubentrevino2372]

Nice! Just subscribed to your channel. I was just curious what type of performance (speed)she'll perform? I live in RockyMountain high Colo.

[@kjsmolik]

These are rated at about 10hp..lots of torque and high revving.. The cheapest cylinder is capable of 50-55mph with higher end cylinders 70+..

[@donewithyoutube275]

where did you get that clutch? with the bigger pads?

[@walterpollard5398]

What do your cylinder kids along with the adapters cost

[@smolikperformance3867]

Links are in the description

[@MaikolMinecraft42]

Nesesito uno de esos dnd lo consigo

[@BuildBreakFix]

I got to say I was skeptical on these builds. First one ever saw close up I now find out is just poorly matched parts to the build. Lot a lot money for a bad setup. I got to see one of these guys kits run with matched pipe and carb and such a month ago in NC the thing was a complete monster lol! Thing was very impressive.

[@mikemiller3303]

Where can I get one of these kits I'll put on my pk80 it already has a cnc high compression head what is a good carburetor for this build I'll put it on my zada screaming demon another question do mz65 clone expansion chamber pipe bolt on to them

[@smolikperformance3867]

Smolikperformance.com You need to modify the headers to fit

[@mikemiller3303]

@@smolikperformance3867 got a question I have a cnc high performance compression head with 8mm holes can I use that head if the minaralli I ordered has 6mm head bolts?

[@smolikperformance3867]

@@mikemiller3303 yes, i recommend getting some 8mm to 6mm bushings. You can find on amazon

[@mikemiller3303]

@@smolikperformance3867 how thick they have 4mm 6mm 10mm

[@smolikperformance3867]

@@mikemiller3303 however deep your stud holes are on the head. 4mm is fine

[@mikemiller3303]

Back again have a question about the minaralli hybrid do these engines tend to run hot mine has 130 miles on her just switched from 32:1 down to 40:1 after a 5 mile trip she's 330 degrees sound about right and she likes to 4 stroke after about 19 mph and she stops and is ready to go at around 30 mph

[@smolikperformance3867]

Because of how much power they make, if improperly tuned or cooled. They will overheat. Around 300f is the temp you're shooting for

[@mikemiller3303]

@@smolikperformance3867 will they run hot when they are still breaking in mine has a little over a hundred miles on her she's running 330 degrees now that's just going 15 to 20 mph what I was told and 32:1 first gallon of fuel then drop down to 40:1 did the dropping down oil ratio today

[@kevinrice4909]

Cool and the gang... great vid kid

[@doug42780]

Shouldn't u put a little oil on the rings before you put it in. I do

[@dr.weaver6011]

Is it compatible with just about any 40mm stroke kit or is it only compatible for the Zeda 80cc kit? Also is there any modifications that have to be made to the motor to accept the new cylinder case like porting and balancing the crank?

[@smolikperformance3867]

Any standard 66/80cc engine will work. Both 38 and 40mm stroke, we prefer long rod cranks. No modifications are necessary, however, case porting and crank balancing is highly recommended

[@dr.weaver6011]

@@smolikperformance3867 Thank you very much!!!

[@عصفورالليالي-ع8و]

Can you ship it to Middle East (the spacers)

[@smolikperformance3867]

Yes I can

[@franciscoholguin8018]

Question about clutch and the clutch pad .did you cut out the clutch your self an were do you get long clutch pads like that

[@kjsmolik]

The clutch is custom and the pads are cut to fit.

[@michaelmarcketti3102]

Does kaos customs make a header for the minarelli

[@smolikperformance3867]

Yes

[@ccmadness]

I want to buy the CNC Racing 70cc Minarelli Vertical Engine for a build with the f-zero bike and i want to know if it is compatible with it

[@smolikperformance3867]

Yes it is. You will want to chose the 1.65" and 1.25" mount option

[@chuckingram5966]

Have you ever tried running that motor without the read cage? And if so what kind of results did you get.

[@smolikperformance3867]

No you cannot run it without reeds. It has a rear transfer port that goes directly from case to intake. Without the reed it will all backflow through the carb

[@deleted203]

I have a kx85 exhaust from Steve at kaos kustom garage for the 40mm cylinders. Would it bolt to this cylinder or would I need one with a different header welded on? Would save me some money if it did. Lol thanks for the video.

[@smolikperformance3867]

The header needs to be specifically for a minarelli. It has larger bolt spacing and different angles

[@deleted203]

@@smolikperformance3867 that's what I was thinking. Thanks

[@jameswilliamson6532]

I seen the 70cc and also a 90cc one. Will the 90cc,50mm bore fit on my bottom end? Anyone know please help me out .and where do I get the 10mm spacer it dont come with the kit off Ebay????

[@smolikperformance3867]

90cc kets require a stroke crank and will not fit a jormal china bottom end. The spacer can be found on my website smolikperformance.com

[@whatsyurprob158]

Excuse me, but what about the 'clutch tree', and the lack of clearance between the same, and the VM 20 Carb? 😡

[@smolikperformance3867]

@whatsyurprob158 No clearance issues, the cable stay falls below the carb.

[@whatsyurprob158]

​@@smolikperformance3867Thank You! How about installing the studs. Mine screw in with just my fingers until they bottom out. Using red loctite, is that the way to seat the studs so they're all the same height, or, do I have to put a nut on them, and tighten them more before using the loctite? Mof, if I tighten them more than just with my fingers, how will I know they will all be the same height? Thanx, again!

[@leandroborgesgoncalves363]

hi friend where did you buy the cylinder kit from this? tell me the site please

[@smolikperformance3867]

Smolikperformance.com

[@chuckingram5966]

You said in the video you sell that as a kit how much are they? And what is the availability?

[@smolikperformance3867]

All products are listed on my website Smolikperformance.com

[@Bull3tBikes]

Do you have a link for that cyl head? I’ve seen a few people using them and they look nicer than the china cnc heads being offered

[@smolikperformance3867]

I do not. They were a limited run a year or so ago. They're no longer made from what I know

[@joneserupinsmoke9161]

What's the price for the Set up.I have a few engine kits and looking to upgrade one and if its worth it probably end uo doing em all

[@smolikperformance3867]

The conversion kit is about $300, or a complete engine is $500-600. They can be found on smolikperformance.com

[@smky7211]

Will you have to port your case to match the spacer port?

[@smolikperformance3867]

While not required it is recommended

[@tegotypu7492]

Where u get that spacer :0

[@smolikperformance3867]

I manufacturer them. You can buy one on Smolikperformance.com

[@600bubba]

Hell yeah is that Kurt's motor he wrinkl painted

[@smolikperformance3867]

It is!

[@kjsmolik]

Lol yep..gonna be my beater engine..

[@elpepewow4825]

Hacen envíos a México?? Me gustaría comprar algunas productos de tu tienda,, muchas gracias amigo

[@aurore3473]

Where i Can buy this cylinder please ?

[@smolikperformance3867]

Smolikperformance.com ill have them in stock soon

[@keeganhache6667]

You should make a spacer plate for 38 mm Stroke. Because that would make it more universal

[@smolikperformance3867]

Yes we have been making 38mm stroke spacers for quite a while now. smolikperformance.com/products/minarelli-vertical-long-rod-spacer

[@keeganhache6667]

@@smolikperformance3867 thanks man that well help me out because I have a af80 rod which is a short rod The only thing I’m worried about is if I build a Minnrelli I might need to do it on a totally different bike. Because most of my builds are either mountain bikes or cruiser bikes. Like I might just save up and get a felt faker frame

[@y.molina7887]

How you buy that?

[@smolikperformance3867]

Smolikperformance.com

[@p.k.motorsports5104]

Can you replace a one piece jug with one of these?

[@smolikperformance3867]

Not that I'm aware of. One peice have different stud spacing

[@p.k.motorsports5104]

@@smolikperformance3867 damn thought so sometimes I regret buying the bt80 nothing is compatible

[@teriongkalasvlog2890]

How to buy that kit bro

[@smolikperformance3867]

Smolikperformance.com

[@jessem3553]

is there any chance you will be producing anymore minarelli kits i would like to purchase one.

[@smolikperformance3867]

Yes, I'll update website this weekend.

[@kristiankj7026]

Will this fit on a bt 100. There stroke is 40 mm

[@smolikperformance3867]

I am unsure

[@reinierperez8235]

Dónde compro un kit así ?

[@smolikperformance3867]

smolikperformance.com/products/70cc-minarelli-vertical-conversion-kit?

[@gregorykeith7998]

What kit?

[@Baldys_projects]

So this swap right onto my yd100 engine? Subscribed.

[@smolikperformance3867]

Not sure about YD. I am unfamiliar with their geometry

[@michaelbrinks8089]

@@matouslitera8073 Does YD100 engine kit use a 50mm piston and what size piston does this mineralli kit use?

[@royhernandez1899]

I read the comments saying something about the 50 MMS spread and this one has a 45 millimeter spread maybe you can use a 90 CC conversion kit you'll just have to make a custom spacer there's a guy on KZbin that made one out of aluminum stock

[@jeffreydavis8599]

Is it just reliability that makes it worth upgrading or is there performance gains?

[@smolikperformance3867]

Both! Lots of performance gains as well as reliability. Its a real cast iron yamaha cylinder

[@jray4957]

You still selling drill press tops?

[@smolikperformance3867]

Drill press tops? Sorry I dont know what you mean?

[@jray4957]

@@smolikperformance3867 I thought you said you was selling them for minarelli

[@smolikperformance3867]

@@jray4957 do you mean drilled cylinders for 8mm threads? If so then yes I do

[@jray4957]

@@smolikperformance3867 👍🏾 yes ? You think it’s better than the phantom? I just got..I want to do 50+ or close like 42/43 mph now

[@smolikperformance3867]

@@jray4957 100% better than the phantom. Phantom is about 3hp, minarelli is 6-7hp out of the box, 8-9hp with some porting

[@vohnholden6203]

Badass! I'ma buy a conversion from your links! Where can I get the custom clutch setup you have? I know of one website but curious about the particular one you have

[@smolikperformance3867]

The clutch setup in the video is no longer sold. We do have upgraded internal springs and pads that work better

[@jgbelmont]

Where do you find aluminum that thick? Paypal if possible.

[@smolikperformance3867]

I cnc mill it from billet aluminum blocks. All on Smolik Performance

[@jgbelmont]

@@smolikperformance3867 Where do you source your stock materials?

[@smolikperformance3867]

@@jgbelmont local metal supplier

[@jonnyc2.047]

hay how much my mom just passed away covic19 aaaand i am geting foodd and stuff whith my bike i have a back up 66cc i like to mod and i dont no if u wood work out cost for the parts i wood need i can buy the head my self but the spacer i wood not be abull to make

[@smolikperformance3867]

Check out my website smolikperformance.com. everything you need is listed there

[@michaelmarcketti3102]

Do you have a link for a good pipe?

[@smolikperformance3867]

Used 60-80cc dirt bike pipes on ebay, ebay jog pipe, or look on maxiscoot for the best scooter pipes

[@dragosmith9522]

What other intake will adapt to this engine

[@smolikperformance3867]

At this time I only have vm20 and vm18 adapters. That is all I would recommend.

[@dragosmith9522]

@@smolikperformance3867 I was asking if i could use a different intake besides the one you offer and if so what kind?

[@smolikperformance3867]

@@dragosmith9522 there are many intakes that will work, however I will not recommend them.

[@dragosmith9522]

I'll just order one of yours and a reed peddle

[@SpACeCruizeR2o3]

thats a pretty motor u should do a giveaway or contest raffel

[@michaelmarcketti3102]

Will a mz65 pipe work for this application

[@smolikperformance3867]

It will have to have a modified header. Even then, a better pipe is ideal

[@jaayse]

@@smolikperformance3867 what would be better than an mz65??

[@smolikperformance3867]

@@jaayse a real dirtbike pipe modified to fit

[@julioramirez4047]

How many hp on that set up?

[@smolikperformance3867]

The Racing Minarelli 70cc is 8-10hp

[@deleted203]

Guy named Don butler charging $750 for a china doll with falcon 911 cylinder and saf clutch. These people are crazy charging that much when we can get an engine 10 times better plus cheaper from Ethan or Ryan. Best deals around compared to anyone. Especially these back yards builders on the Facebook groups. I understand trying to make money but $750 for a china doll you can build yourself for half the cost is ridiculous. Ethan will Def be the go to guy for now on for motors.

[@guslebolideur8736]

here in France we have crazy access to a lot of 70cc cylinder like polini,top perf FOR not too much money. I'm making a Minarelli build , and I have spent less than 120$ for all the things. using second hand piece like carb and admission , and with brand new cylinder

[@bobjeffersonjeffy7968]

@@guslebolideur8736what type of stuff did you use to build

[@michaelmarcketti3102]

Will a Jake's head have a good "squish "

[@smolikperformance3867]

Yes decent. You will still have to make sure the squish clearance is set properly

[@michaelmarcketti3102]

What do you mean by the swish clearance?

[@smolikperformance3867]

@@michaelmarcketti3102 minimum distance from piston to head at compressed tdc

[@cipunx13-gasbike]

Spacer how milimeter?

[@smolikperformance3867]

47mm bore

[@cipunx13-gasbike]

I mean, how many millimeters of thickness aluminum spacer for a 70cc Minarelli cylinder

[@smolikperformance3867]

@@cipunx13-gasbike long rod 40mm stroke uses 10mm spacer

[@cipunx13-gasbike]

Oh ok..friend thank you 👍😁

[@maxscianimanico7279]

What’s the name of your website

[@smolikperformance3867]

Smolikperformance.com

[@mikemiller3303]

Nice video what is the name brand of that head cause I have one of them minaralli hybrid engine and I couldn't get my cdhpower cnc high performance compression head to work when tightening the head bolts down you could see a small gap or is that normal because of the small raised lip on the high compression head? Next question I was torqueing the head bolts down to 10 pounds and stripped out one of the holes in the engine block will a heli coil work to fix it?

[@smolikperformance3867]

The gap under the head is normal, there is a compression ring if you look at the bottom. Helicoil yes. Only go hand tight

[@mikemiller3303]

@@smolikperformance3867 I removed the head from my pk80 with G4 cylinder and it was sitting flush on there I was just curious why it was different why one had a gap and the other don't

[@smolikperformance3867]

@@mikemiller3303 just depends on the manufacturer

[@mikemiller3303]

@@smolikperformance3867 ok I was just curious cause they're both 80cc thanks for the info

[@mikemiller3303]

@@smolikperformance3867 one more question when I get this motor fixed and running what is a good starting point for break in oil ratio 32:1 ?

[@vanderley43]

Quero comprar sou do Brasil

[@backyardrestorations]

Would this work with a MZ65 pipe?

[@smolikperformance3867]

Not without welding the header to fit. And even then there are better options. A real 65cc to 80cc mx pipe

[@backyardrestorations]

@@smolikperformance3867 I’m not worried about welding. If you can check out my latest video (3 mins) can you tell me if it would work? I’m worried about the frame working.

[@backyardrestorations]

@@smolikperformance3867 I’m on the fence about buying it and it sounds good and it has a decent price. If you could tell me if it would work with my current setup I could really look into buying it.

[@smolikperformance3867]

@@backyardrestorations itll work but do not recommend. The mz65 is a low level pipe

[@backyardrestorations]

@@smolikperformance3867 yeah I figured. The carb will work ok right? 21mm PWK?

[@fabianmurray7230]

How much do you sell your kits for

[@smolikperformance3867]

Prices are listed on Smolikperformance.com

[@cuper1monta496]

Everybody oil your wrist pin, and piston bore, wipe off oil on mating surface, add your ultra Gray,

[@sergeygedzenko4192]

что за серия мотора он явно отличается от ф80?

[@jamiebouchard9862]

Are some of the channels cut out of a stock clutch plate in order to allow a wider clutch pads?

[@smolikperformance3867]

Yes, this was an old style clutch from many years back before stronger springs existed

[@cassianolima663]

Onde consigo essa flange?

[@smolikperformance3867]

Smolikperformance.com

[@michaelmarcketti3102]

What size studs in the exhaust

[@smolikperformance3867]

M6

[@johnnykjaersgaard7978]

Great and informative video I have just ordered an Italjet KR cylinder for the same vertical engine. Will it be able to run with the dellorto 16mm sha - is it ok to run Stock clutch just with a stronger spring

[@kjsmolik]

Highly recommend using a Mikuni vm20 and a stock clutch is ok with stronger spring.

[@jonfuller5764]

How does the 70cc your building compare to a gt90 case induction 50mm sleeve cylinder?

[@smolikperformance3867]

Not even a comparison. Minarelli has superior ports and quality to any china doll cylinder.

[@jonfuller5764]

I do like your setup. Has it been tested on a dyno? I am curious about it's performance...mainly its top speed? ( I know top speed isn't everything ) I am interested in it's performance, I would Not want to buy a beautifully designed , Non China-doll, that does not outperform anything China has to offer, as far as top ends on 66-69.4cc motors. Tell me... what makes your motor setup better? Aside from its obvious better looks.

[@jonfuller5764]

I personally dont like china dolls. I just wanna know I'm getting the performance and quality that does not compare to a China doll. To see if it's worth the investment.

[@smolikperformance3867]

@@jonfuller5764 yes it has been tested on the dyno once. Even with a poor tune it made 8 hp and 6 ftlbs. It is definitely better performing and will outlast anything china 100×. The cylinder itself is a real yamaha performance scooter cylinder. Its cast iron so it lasts for 10s of thousands of miles, and is designed to withstand 11k rpms constantly.

[@johncarlo1273]

Smelli pochelli minelli yeller belly

[@frantisekskudrna9232]

Hi, What cylinder do you use??

[@Mike-GreaseMonkey]

Nice brraaaaap 👀

[@Bigade51]

I have been building 2 stroke scoot motors for years .. never seen one built without any form of lube .. first run it will be dry and score the crap out of the barrel .. maybe just an oversight but not good in a tutorial which others will copy ...

[@smolikperformance3867]

Fair. All cylinders come prelubed.

[@Bigade51]

@@smolikperformance3867 thats good but still no lube on little end bearing or wrist pin .. also maybe wise using a torque wrench on head bolts to ensure even pressure on all studs..

[@smolikperformance3867]

@@Bigade51 yes, bearings and wristpins come prelubed as well. Torquring is something I do take for granted as I go by "hand tight". Never used a torque wrench for these engines