The RIGHT Way to Install a Strap Button on Your Acoustic Guitar

Download my 20 Top DIY Guitar Maintenance Tools: tonypolecastro...
Installing a strap button in your acoustic guitar (it's not as scary as it seems!)

[@KevinCGleason]

Thanks for the great information delivered with humor. I would install the button today, but it will take months to grow the beard which I am required to get out of the way 1st.

[@offbrandplanb]

I would never be able to because I don't have the ability to grow a beard lol

[@biancamacias7476]

😂😂😂

[@robertlaube574]

@@offbrandplanb i guess women with beards werent as common 2years ago as they are today

[@edwardebel1847]

How's that beard-growing going?

[@metalman2943]

LOL

[@jasonc3803]

I have wanted an extra strap button on my acoustic for literally 25 years. I never had the guts to drill into my guitar. Thanks to the pandemic and this video, I got it done. Great video.

[@Rilez616]

I practiced on an old guitar I had and I just drilled a useless hole into the guitar, thank god I didn't try on my new one....

[@kevinmoulton2480]

I performed this major surgery on my Yamaha today. Thank you for the useful tips. The patient is recovering comfortably.

[@FromMyEyesToYours]

What amazes me is how many people mount a strap pin on the bass side of the neck, which, as Tony says, "does you no good whatsoever". Like, none. It creates the entirely wrong angle and causes the strap to pop off of the pin almost instantly. Fortunately, for those who are attempting do add a neck pin, this instructional shows the correct position for it. Nice video, Tony.

[@kevinmoulton2480]

One of those rubber stoppers would help if the button is on the wrong side.

[@ukuleleeddie1953]

Thank you! I purchased an older Fender guitar that only had one strap button. I don’t like tying a string to the strap, so I decided to add a second strap button. I was a bit worried since my Fender has a very glossy finish. Following your directions, I had the button installed in a few minutes. Very easy.

[@utub333]

Things to consider before installation: 1. Will the guitar still fit in its case if it has a new strap button installed? Some cases are so snug they cannot accomodate a strap button without be altered. 2. Do you like playing guitar with a strap and is it comfortable to you? Maybe try someone's else guitar with a strap, or hit your local guitar store and try one there -- just to be sure.

[@duxxxhm]

My guitar came with strap button in similar position from factory, and I hated it. I just realized that once I removed it.

[@arnolddealiii4259]

I would make one suggestion. Get some wax or some soap and coat the threads of the screw by scraping the threads across it. This will coat the threads of the screw and will act as a lubricant so that the screw goes in easily. I have seen stripped screw heads because the didn't lubricate the treads. The screw will not back out. I have also seen screw heads twist off as a result of too much friction. It's a major step and I wouldn't put any screw into a piece of wood without some type of lubricant to help the screw along the path.

[@tacguitar]

+Arnold Deal Great tip thank you for sharing!!!

[@Rehdman6444]

Very good advice. I have used that trick many times. I think that a novice might want to take the time to practice on a piece of scrap hardwood before installing the strap button on a good guitar and, YES, use the strap button screw to practice on.

[@PastorMike02]

Yes, use some wax or soap!

[@ALayne08]

@Arnold Deal Great tip, thanks

[@arnolddealiii4259]

Waters soap and wax has worked for me. I don't have a problem with your method but I've installed screws in hundreds of instruments and never had a problem or for that matter a return.

[@RafaelReiPizarro]

I was amazed for a second on how fast he used the screw driver lmao

[@LonestarLunkers]

Rafael Rei lmaooooo💀

[@RealPantera]

😭😭

[@ericgugliuzza4789]

John Petrucci came in to do that part I think.

[@penguinpie5056]

couple of protips for you. be careful about the tape on the drillbit as it can get pushed up when you get to depth if you keep pushing too much and second, use a brad point drill bit for minimal breakage at the hole. a third point is to use a drill bit that's around the size of the screw shaft. too large can let the screw get too loose but too small can also cause the wood (at the body strap button location) buckle a little and come up or break off altogether..

[@JohnShalamskas]

Great tips!

[@brntrssll]

Regarding the 3rd point, for anyone who isn't sure: yes, the drill bit should be the diameter of the screw shaft... not the outer diameter of the screw threads. The threads will cut into the wood but the shaft needs a clean hole. If the hole is too large, the threads won't have anything to hold onto. If the hole is too small, the shaft will be forced to splinter the wood.

[@LANSPERADOmusic]

the real pro tip is not placing the button where it will directly interfere with your fingers lol

[@zant5721]

Just finished installation myself. Was a little squeamish at first, but as I moved forward, got er done. Thank you for the clear and easy instructions. Now I can concentrate on playing my guitar. Again, thanks👍🏽

[@nicolasaldunate7894]

Thanks bro! Recently i found my grandma's old acoustic guitar and i'm trying to fix it, and because of your tutorial i was able to put a strap on it. Keep rocking, man

[@thedevilinthecircuit1414]

The only caution is to first take a peek into the sound hole and see if the neck is installed with threaded steel fasteners. Many guitars these days use one or two hanger screws with washers and nuts, or bolts with threaded anchor sleeves to secure the neck to the body. If there is steel hardware in the neck joint, you do not want to drill into it. Even if your guitar is made this way, you can still install the strap button by measuring before you drill so you don't drill into steel.

[@chriswareham]

"Keep your beard clear of the drill bit". There speaks the voice of experience :-D More seriously, thanks for the succinct guide to fitting a strap button. Just followed your steps and installed one on a Loar archtop and it went fine despite my apprehension about being anywhere near my guitar with an electric drill!

[@sandsedge]

I always wondered how to do this, as I had left over strap button hardware from a locking kit I put on another guitar. This video made it super simple... done in 5 minutes to my Washburn Acoustic, so now I will play it more!

[@damonking3435]

sandsedge I also have a Washburn Acoustic! 😁

[@DominguezMusica]

Thank you for explaining it so clearly. In case it’s helpful for people who read this comment, I think I never used a drill before and just following the instructions shared in the video I got it! 😍 Now is going to be much more comfortable to play with the guitar in my gigs! 🤩

[@mattpolapink1520]

Great video - just got my second button and your instructions worked like a charm. I prefer this quite a bit over connecting other end of strap with string.

[@JohnShalamskas]

I agree, the string or leather strap at the head of the guitar gets in the way of my left hand, so I much prefer a strap button on the heel of the neck. But on a guitar with light body and heavy neck, using a cheap nylon strap that's slippery, the neck is always rotating towards the floor if I use my preferred method, so on this guitar I use the shoelace at the head to attach the strap. I did install a button on the heel so I can use it with a leather strap that has enough grip to resist the heavy neck's tendency to swing down.

[@georgelang7023]

Very good point, and for more than just one reason. I've played electric guitar professionally for many years (too many to want to mention here). I only recently started playing Live with an electric acoustic and the strap at the neck end tends to affect the tuning of the instrument as well as make the position difficult. Thanks, for this great instructional video! ...g

[@MrVinny873]

Great instructional video.. especially when you caution to get the beard out of the way.. experience is a great teacher isn't it? lol!

[@JohnShalamskas]

"I wonder how he knew about that tip?"

[@SP4313]

I laughed when you went though the first step... putting the button on the high E side of the neck. Great job on this video. I once had a pickup installed professionally on my very first acoustic guitar when I was a kid. When I picked it up the input jack was drilled on the top side of the body. I tuned in to see the proper location of the top button and you answered my question. Thanks.

[@Lancefrei]

This method worked for me. I practiced on a scrap piece of 2x4 to make sure the bit was the right size for the screw. For 53 cents I bought 2 strap buttons from China and now can use a strap on my J Reynolds acoustic.

[@stephaniewayward6336]

Great vid, but one thing forgotten/missing… this size of the drill bit… when I do these, I measure the screw, then use two sizes down for the drill bit… so, a screw measuring 9/64”, I will use a bit that is 7/64”… conversely, one screw measuring 1/8”, I will use a 3/32” bit…

[@ffhorrorfan9722]

THANK YOU FOR THIS!

[@Tr0llHunt3r]

Thank you so much, this was a life changer. I've never owned a guitar that didn't have a strap button on the heel until my first Martin. I hated how it would always slide around and put so much pressure on my neck. Now it feels locked in and I can cant it slightly like I'm used to! Also, no, this was not at scary as I thought it would be.

[@stevepolaski5643]

I just did it tonight and am really happy with the result. Thank you for the instructions -- really spot on!

[@robertwalsh1032]

Perfect results following you Tony. I'm also a student at TAC which has GREATLY improved my playing and enjoyment! Thanks Bro!

[@honourrolle]

Thanks, I don't have a drill but a still managed to get my strap buttons properly installed by screwdriver. It was very easy. Especially after learning the proper placement. Thanks again.

[@julietissue8528]

Thanks!! It worked great. I had to use a 3/32 bit for the strap buttons that I had. I can't believe I have been paying for this all these years. Couldn't have done it without your help! This stay-at-home situation has really showed me that I can do more on my guitar than I knew. I even installed a K&K pure mini in my new 000-18. However, the store drilled the endpin out for me, so I didn't do it all on my own!! But I will the next time! Take care and be safe.

[@ryancox5775]

I just added a strap peg to my baby, a Martin 00028-EC. Your guidance made it easy, THANKS. With calm and confidence, I added a peg in 5 min. Love it. Thanks again.

[@keckojones3324]

Excellent video! I just took the plunge and popped it into my guitar. Came out perfect. Much more enjoyable to play this way.

[@JoeKrol]

The only thing I would ad is to take a nail set or even a finish nail and tap it with a light hammer so the drill bit is less likely to slip when you are starting. But GREAT VID.

[@dudeman1455]

This is the first thing I thought. I use a scratch awl and make a dent for the drill bit pretty easily with that. That way the drill bit won’t walk around on the surface.

[@ccarter302]

Tony, you have the skills to build...your capable and you already are ahead of the game because of your knowledge of acoustic instruments. I've been building for sometime now and I kno a builder when I see one..take that next step

[@Bliggick]

I think that sometimes those felt washers cause more problems than they prevent. It's like you can never get that strap button locked up tight against the guitar body and it always works it's way loose. I think the right material would a plastic disc that is slightly flexible or rubbery, maybe one can be made from a guitar pick.

[@charlie-obrien]

A very short piece of surgical tubing, like they now use on electric guitar pick up adjusters is exactly what you described there. Don't run out and buy 12 feet of tubing though. Guitar Center will have what you're looking for.

[@ynreflect]

Thanks, I just installed the extra button today using your instructions. I was careful about the beard, but I learned the hard way. I was drilling holes (with a 120 volt plugged in kind of drill) in a wall to install some mirrors. I got a little too close and the next thing I knew, my beard got caught in the chuck and the drill was pulled up against my face. I was afraid to look at the damage - I thought that it had ripped a chunk of my cheek off. But it only ripped out some of my beard. It took a few minutes to untangle it from the chuck.

[@michaelorgera181]

Great Instructional Vid! I looked at a few and yours just streamlined the entire process. I have a very old Gibson J45 and doing it right was critical. Thank you for the tips! Awesome, Simple and to the point!

[@jacobus67gt]

If you use the higher frets, This puts the strap button right in the way

[@ulrap1202]

Yeah I think it's better to place it away from the fretboard, about 2/3 of the way over. That's where Martin puts it.

[@kevinmoulton2480]

Nice. I have a Martin with a strap button just where you indicated, and I bought a second hand Yamaha with no strap button. I thought I could live with the strap tied at the headstock, but I hate it. The guitar moves all over the place. I will definitely be attempted this surgery.

[@crashputer]

Simple, straightforward, thorough. Thank you.

[@robertclarke4587]

Thanks for the video! Knew what to do, but lacked the confidence. Did it yesterday and it looks and works GREAT!

[@wagnerrichard2043]

You have fantastic subtle sense of humor. Love it! Thank you for the lesson..

[@ingresskerensky6957]

Being a bearded man, I appreciate the advice my brother.

[@luisangelsmusic]

Thank you so much for this guide. I was about to mess this up so bad if I didn't watch this. I was going to put it on the butt end of the neck hilt, like an SG guitar. Also, it took me 3 pilot holes on another piece of wood to find the correct depth before I drilled my guitar neck. Also another tip to find the right spot to drill. Get someone else to help you mark on the piece of tape the spot where the hole of the strap is against the neck of the guitar while you hold it and have it on you like you would normally use it. Makes it easy to get a really good mark.

[@jaynormal]

Followed the directions and my guitar now has a strap. Thanks for the easy to follow directions. I used electrical tape as my non tack tape.

[@Intheshed123]

jaynormal, At times when you dont want tape of any sort to be very sticky, Just stick it to your jeans once or twice first. If you look at the tape after you rub it on your jeans you can see the lint on it. It works well for many projects when the tape is only being used as a protector. You can put a few layers on top of the first lint piece for extra safety. The lint will allow it to pull right off without peeling the finish off. Try it, you will like it. :) PEACE...

[@clarkbarcelo4694]

How bout the other strap end?

[@ianatendido]

Normally, the other end already has it.

[@JS-oi5jt]

Doesn't answer the question. I'm here for the other end as well..

[@Andrew-ii8dl]

For the other end you just want to find the exact middle of the bottom of the guitar and do the same thing there.

[@nicolasaldunate7894]

@@Andrew-ii8dl exactly, i did the same and it works great

[@larry6686st]

The other end doesn't need it. That one button hangs on the beard

[@TommySG1]

I love your videos Tony, you crack me up at times. I'm planning to retire next year God willing, first thing I'm planning to do is join your acoustic crew since I'll have all the time in the world then! Thanks for all the great content man.

[@SantaClaw]

Thanks, I just started learning how to play the guitar. I bought a cheap beginners guitar, put on a set of quick disconnect buttons, and this video of yours was of great help, just knowing where to install it.

[@bennyshaversmusic590]

Tony *all* of your links and input are incredibly useful.

[@stuartdocherty8409]

I likes the cut of this guys jib..... I'd also advocate marking the hole location with a scratch awl or similarly pointy object, applying that tape to your trouser leg a few times, to consolidate the low tac of the adhesive, starting the drill in reverse, to centre the drill and crease the timber in the area you want to drill and... using a leather washer... You can make a bunch from a scrap of leather with a hole punch and a blunt nail.....

[@El_Dean_M]

Thanks...clear and simple instructions that just reinforced what I thought I'd need to do.

[@benjaminwells2985]

already knew how to kinda do this, but watched your video to triple check. was pleased with the subtle humor. thank you sir!

[@xaptronic]

thanks to you, I repurposed the strap buttons from my bass which I replaced with a locking system and added them to both my acoustics! :D

[@PriyanshuBharadwa]

Thank you!! 4 years after you posted, I just installed the strap lock. Your video helped a lot and saved me from a lot of anxiety. 🫶❤️

[@Marc_Schuster]

Followed the instructions and it worked perfectly! Thank you!

[@ekids.bassment]

I knew something was up the first time i watched an instruction video how to do it. Even in the guitarshop they told me, "just screw in the middle". luckily i watched your video before installing. thnx

[@Ronjesse1]

i know in all his vids he explane everything pefectly even a child can do it but i say" hurray another good man that helps others and save them money.. and that is a good thing.. u go man thanks for all the video's greetzz RJ

[@ChavisFlagg]

Yes to the intro tune

[@DavidCriner-i7i]

Tony, this is David Criner I totally by accident. Just found your video because I am attaching a strap to my Gibson. Thanks so much!

[@mygirlzrock652]

Thanks Tony - I was having some serious anxiety about drilling into my pristine buddy . . . and I didn't want to resort to the old string-around-the-headstock option.

[@adammiller3774]

Followed your directions - worked perfectly. Thank you, Sir!

[@ALayne08]

*Running With Guitars* I think you coined a new phrase, lol I needed this info for a mandolin. Thanks

[@lvl99raidboss]

Outstanding tutorial. Very helpful. Only caveat is that if you don't have a gnarly beard on hand, find a skirt of any length and put it on before you begin work. Otherwise, no issues encountered and I am very happy with my strap button.

[@jacobwilson6976]

Um, am i Missing something? A strap needs 2 buttons. Where does the back one go? This is incomplete.

[@philipaklonis7906]

Hi Tony, I followed along and installed the strap button! Yes! Success. Thank you for a great video! Phil

[@Ocean8881]

Thanks for sharing with such clear explanation! I was wondering why you did nt continue with the installation of the button at the bottom then I noticed It s pretty self explanatory and my guitar already has one at the base.

[@Gongasoso]

My Takamine came from factory with a strap button a bit off from that spot, but I don't think it's a flaw. Because the placement of the strap button showed here could get in the way of the hand when playing in the higher frets

[@charlie-obrien]

I put the strap button on the low "E" side. Because when I tried the setup (before drilling anything) the button did impede the reach on my cut away and it caused the guitar to tilt slightly away from my body when standing. So I put the strap button with a lock, onto the low "E" side and it cured that. After all that is said, I will still use a strap attached to the headstock by a cord most times. Yes, I'm that old.

[@j.graves8062]

I feel like the beard in the drill story was personal. Made me literally laugh out loud!

[@GarethRidout]

Thanks. Even though I've done this before it still was helpful to review.

[@markspencer352]

Sure appreciate your videos...clear and helpful!

[@kevdadd1976]

Very informative, I just acquired a new Martin and for some odd reason Martin doesn’t have the strap button at the base of the neck like my other acoustic does. Bit of a let down, no worries you tube to the rescue. Thanks

[@steved4677]

Excellent video. About to install a strap button on a very expensive archtop & just needed a quick sanity check

[@popoaggie]

Drill Baby Drill! Was waiting for that bit to pop up through the finger board.

[@AntonthebantoN]

Really appreciate this video, thank you! It gave me the confidence to go at this myself and it got me out of a pickle too. Thanks again 👌

[@robtoma5650]

I just installed on my D28, Simple to do, but nice to have a guide.Thanks!

[@peterspears1]

Thank you - this was very helpful. Love the beard - no visible evidence of past experiences of getting it wrapped up in the drill bit 🤣

[@davidreitnecht7348]

Thanks for the vid. A StewMac vid showed several other locations but not the way you installed. Your method makes sense to me.

[@warrenmusic]

Yo Tony, I just met you at LAS Airport at the security line! Btw, nice to meet a fellow KZbinr IRL, hah. I used to make a bunch of Radiohead tutorials but pivoted to music theory and ear-training more recently. Not sure what my channel will become next, but thought I’d reach out in case you were interested in connecting sometime.

[@nathanshinder5314]

I don't entirely agree. First, I would plan it, trying the strap on the (usually) existing strap button on the bottom of the bout. Try the strap by the bottom button, and temporarily tying the strap to the neck, around the proposed area for the second strap. The area shown for the top strap is probably best, but maybe not! Sit & stand with your test spot. Try to play a little. I might place the #2 an inch, or two centimeters further from the bout, where the curve of the neck is a little less severe. I would use a lot more tape. Masking tape is cheap, scratches are NOT! Tools slip on a regular basis. Tape should cover 3" to 4", use 3 layers masking, with the mark somewhere near the middle of the tape. Mark the spot with a sharpie, or ball point. STOP! Pick up the instrument AGAIN, and make sure that the spot is 'pointing' to you, and the angle is DOWN. Feel free to change your mind about the spot! Make sure it's right for YOU! I AVOID AT ALL COSTS, USING ANY POWER TOOL ON MY GUITAR, OR UKULELE. Power tools are mindless eaters of fine items. Look for a 'push drill.' This sort of tool (Not normally sold by supplier of musical products) looks sort of like a long screwdriver. It has a very small drill chuck, and mine will only take up to an 1/8" twist drill. I get out TWO twist drills. The first one is much smaller, maybe 1/16" or less. This drills a 'pilot hole', and prevents some of the slipping. Install the small drill, far enough into the chuck, that the exposed part of the twist drill is SHORTER than the screw threads. Drill in ONLY far enough to get a good start on the hole- like 3/16". Careful NOT to break either twist drill, they can be hard to extract. Small twist drills break all the time!! Pump the drill in an out, by the handle, and the chuck will magically spin back and forth. Make sure it's at a right angle to the surface, & think if there is a possibility of going THROUGH the neck! The second drill can go in just a tad longer than the screw threads. There could be a lot of pressure in the area of the screw, and there is a remote possibility of splitting the neck. After the hole is drilled, LEAVE THE TAPE ON FOR A WHILE!! Start screwing the button in, WITH THE TAPE STILL IN PLACE!! When the button is most of the way down, then peel the tape up, right around it, with your fingernail, but leave the margin of the tape in place. Finish torquing down the screw. Now, did your guitar get the slightest scratch? No, because that would be impossible! Does not take a lot of force or strength, you are not making furniture! Remove the tape, and the residue, using Goo Gone. (It is much safer than lighter fluid.)

[@jimdoner3443]

I was trimming really tall grass today with a gas powered weed tracker. Of course grass wrapped around it and I had to stop and clean it out. Made me think of you Tony.( that was supposed to be whacker not tracker.)

[@knguye11]

Thanks for the demo. I installed this on mine new Martin M00-15M.

[@catherineanne1097]

Thanks! Useful video and fun to watch, too! Q... The peg on the lower bout of the guitar that holds the other end of the strap, what can I do since mine is loose? Would you advise glueing it in? Thanks!

[@EdGloss]

Great video. Cost me $3.50 for the button and installed it perfectly myself. Sam Ash wanted $40 to do it.

[@jeffweaver955]

Beard tip was a good one!

[@ZackDaly]

"first things first, make sure you get yer *beard* outta the way..." hehe. luh u, sir.

[@nickalmand]

Just bought a Collings CJ and they forgot to install the strap button for me...thanks to this video I didn't completely FREAK OUT when I had to do it myself! *OH MY GOD I'M DRILLING INTO MY NEW COLLINGS!!! WTF IS WRONG WITH ME!!!* Thanks!

[@florianverhagen4414]

This video is sponsored by philips you have to have a philips screwdriver otherwise you cant do this

[@Ronjesse1]

phillis betekent kruiskop schroevedraaier Florian

[@bobsullivan5714]

Florian, Fortunatly, I have a Whitworth screwdriver.

[@philthyphil3324]

Um phillips is not a brand of screwdriver, its a type of screw head. Think much?

[@bmxbear729]

Philthy Phil sarcasm much jackass? It’s PhillipsHEAD.. that’s why he made the joke. Jesus Christ.

[@CedricSatterfield]

Ha, that sounds like experience talking (moving the beard). Great video.

[@MrAdamNTProtester]

Probably a good idea to use a drop of Super Glue as well just to ensure that the low cycle fatigue of placing the strap on/taking it off, tension/ untensioning >>> does not allow the screw assembly to move at all

[@locar12]

Sorry for asking, do you have a video for the 2nd strap button? (The one on the body/bottom) I liked how you demonstrated the 1st button here 👍🏽

[@jalder]

Excellent, and very charming. Thanks.

[@arthurneeman]

Thank you for the tips. Your video encouraged me to do this first surgery. I installed both buttons on a white Kirkland using D'Addario buttons. A package comes with a little bit thicker screws, so I used 3 mm drill bit. Did you made felt protector by yourself? Is it a rubber or what? I used two layers of dermatin that I quickly found at home.

[@todtodster2133]

Just done it now, thanks for your video, it definitely helped my confidence. 👍🏻🙂

[@mikesimms4859]

...personally i'd put the button on the heel of the neck to keep strap away from hand when playing high up the neck...this button position will affect how guitar sits in a case but prefer it this way when playing...

[@commonfilms9678]

Thank You So Much! Doing This To My 3/4 Acosutic Guitar, Ppreciate It!

[@beetlebrows]

Thanks for the vid! The beard comment at 3:27 had me laughing my ass off

[@michaelmassaro3483]

Great video! I know this is 7 years later, but do you happen to know which brand of strap button you used here specifically?

[@atocox166]

Lol with the beard joke, because I actually have a beard now.I purchased my first ever guitar strap today (Tuesday, May 9th 2017, after nearly five years since first purchasing and playing a guitar) and, although it turns out my "Hohner" acoustic cutaway guitar already has the strap button on it now, this video is still good to know for a future purchase. I was originally searching for/double checking how to put a strap on(I assume the part with the brand "Levy" goes to the back/body/other side that already has the button when purchased on your guitar) then this video came up instead, so I watched it.

[@MacMcCaskill]

"First, make sure your beard is out of the way." Lol. Great advice! Thanks for a very useful and concise video.

[@jimjacobs1961]

This was perfect! Thanks.

[@markstrain8989]

Ok. So, first, I figured out what works best as a neck support. Choose a pillow from the wife's expensive, designer couch. Next up, I watched this video 3x more. Took notes. Then I installed neck strap buttons on 6 guitars. Only messed up on the second try. Sheered off the head of the screw flush with the wood's surface. Oh, well, looks like a dot. Picked another spot, used the next size up drill bit, guitar survived, plays fine, all good. All the others went smoothly.

[@mpoborsky]

Thanks for the info! Super simple.

[@jimdoner3443]

I had to put one on a Martin 00015M you'd think for that much money it'd be standard.(I bought it used ) VERY EASY I thought about putting a little wax on the screw but didn't.

[@Soldier1287]

Installed. Great Success.

[@planninegoodtimes]

I don’t recommend getting a slow start with your drill. Your risk the drill bit hopping out of the hole and damaging the guitar at a slow speed. Another option to ensure the bit doesn’t hop out of the hole is to, rather than mark the install point with a drill bit, create a starter hole with a hammer and an awl. Just just pound it hard enough to create a small dent to seat the drill bit.