The ROLAND JX-08 synthesizer complete Deep Dive guide tutorial

[@floyd101954]

I’ve had my JX-08 for over a year now and I still learned a few things I didn’t quite know from watching your deep dive video. Thank you again for all of your great videos and the time and details you put into them.

[@angelomedi]

same here

[@XNBeatsMusic]

It's is a great synth, Roland is getting better with these boutique synths and the small AIRA. Thanks for the comment, glad you like the videos :)

[@saardean4481]

Damn. I came here and hoped to see the Fx explained as i find them confusing but they are not mentioned … Thanks for hte video though. Very useful

[@freejazzbone]

amazing synth, thanks for your usual expertise XNB!

[@XNBeatsMusic]

My pleasure!

[@kalpeshkpanchal]

What an amazing detailed explanation. Hats off to you. Thank you very much.

[@XNBeatsMusic]

Glad to hear it was useful. Thanks for the comment. it helps.

[@kalpeshkpanchal]

@@XNBeatsMusic Hi I am planning to buy one and not able to make a decision between JX-08, D-05 and JD-08. Which one would you recommend?

[@festivalmiami]

your explanations are spot on. The eq visualization are extremly helpful .. you re the one on yt

[@XNBeatsMusic]

Hey !! Thanks for the comment. Yeah, people really like the Oscilloscope and Spectrum. Why removing it if guys like it right ?. Thanks again for the comment.

[@gacekwilkooki]

I like the sound of this synth a lot!

[@glenesis]

Thanks! This will be very helpful. Paging around is a pain, but this one is much easier than the JD-08. Cheers! - Glenn

[@XNBeatsMusic]

You bet! Thanks for the comment.

[@Dobroz99]

Great explanation. I will return to this several times I am sure. Thank you.

[@tblv9300]

powerful synth and the dual sequencers are great

[@nashosrheney8902]

Great video ! Thx a lot ! It helped me so much ! Can't wait for the next video 🥳

[@XNBeatsMusic]

Thanks for the comment. Next week is the sequencer one.

[@remka2000]

This is extremely useful, thank you!

[@XNBeatsMusic]

Glad you enjoyed it and thanks for the comment !!!

[@bicycleninja1685]

I've got my JX-08 here and ready to attend class on time and on task

[@maracuder]

Thank you - looking forward to watch it in full length. Possibly you could also do the JD-08?

[@_Rasdin_]

great video tutorial. I learned a lot. Thx for sharing, mate ...

[@XNBeatsMusic]

No, thank you sir/ma'am for the comment.

[@HenryThaler]

Great video, lots to rewatch and learn. Can the presets respond to MIDI program change commands? Just got this unit today, will buy a coffee for sure, thanks!

[@funnzie]

Thank you so much! Excellent. Any thoughts of a deep dive video into the Roland JD-08 boutique? I have already seen everything on YT, none are a complete DEEP dive.

[@kinetic-cybernetic]

I love this synth so much. It's so complete and unique. Yet there is something so mysterious to me: Why does the ENVs retrigger whenever any of the DCO's pitch, shape, or modulations are edited? Have you noticed? It kinda ruins the fun if you want some slow pads to change over time subtly by tweaking.

[@monsieursolitaire6214]

Hello there, do you know if there is a legato solo mode? Apart from pitch bending the notes of course? By the way, thanks a lot for this vid!

[@petergrummich730]

midi thru don t keep the velocity correct ,is there a filter ? ,great video again, thanks

[@boni-music]

Great job! Thanks!

[@XNBeatsMusic]

Glad you enjoyed it!. Thanks for the comment.

[@user-or3ce4gt2r]

Thank you 🎉

[@XNBeatsMusic]

Thank you then for the comment & support :)

[@paulhorsley8922]

Brilliant, thank you ❤

[@XNBeatsMusic]

Thank you !!! Glad you liked it. Cheers.

[@analogdriver8635]

Thank you so much for this great tutorial!!, much better explained than the manual provided by Roland. It's an excellent synth both for the price and for the sound, to my ears I find it much closer to a Juno than to a real jx, then with that chorus! One thing I don't understand, when I use it with headphones the audio quality is excellent, while if I connect it via jack to the sound card it's as if it doesn't have the same audio quality. What could it depend on?

[@Optical_Ollusion]

Are you using a stereo cable(s)? I believe it'll sound out of phase if you're trying to run it in mono. It sounded terrible when I did it

[@LDJITA]

​​@@Optical_OllusionI'm the same person but I'm answering from a second account, I use the 3.5 jack cable 1/4 trs, there are bands on the cable so I assume it's stereo

[@stew-i1g]

how do you get to bpm on arp, when i press SEQ after ARP light on i get four dash and a dot by the third not a number for BPM, i have reset it many times but i cannot get BPM at all on arp

[@mudi2000a]

Nice tutorial!! Only thing I don't understand is why they did not add PWM. I know the original also didn't have PWM but I don't like synths without PWM.The underlying engine can do it and other manufacturers also enhance their recreations, even Roland themselves (ACB plugin e.g. of Juno 60 has 2 envelopes, for example). Otherwise it's a really nice hardware and also not that expensive.

[@LDJITA]

You can do PWM by using the second oscillator, so you use square wave in Sync Mod and modulate the pitch by LFO.

[@Dobroz99]

Question, there is one set of controls for the volume envelope, but you have two envelopes. Once you st the first one it’s remembered when you change to set the second envelope? Envelope one always goes with the first oscillator and VCF and the same for the second filter? Thx.

[@lovecraftmusic8717]

Maybe I missed it but does this synth have the "hold chord memory" mode like on the Korg poly 800 where you basically play a chord and then when you turn on that mode you can just play a key and it will play the entire chord?

[@maracuder]

Did somebody else notice an odd arpeggiator behaviour in dual or split mode? When playing the non arpeggiated part, played notes seem to interfere with the arpeggio pattern in the other arpeggiated part by omitting arpeggio notes and breaking up the arpeggio pattern. For instance playing low notes in the lower part - outside of the higher part's keyrange - should normally not interfere with the upper part arpeggio, but it does. Is this a known bug?

[@TariganSuper]

Does it have sensitivity velocity from midi controller

[@ageshero]

Is there a voice limit setting to limit voice count? Say instead of 20- have 6-8

[@bat-powmusic4925]

Do you know, why in some patches the Chorus 2 LED/Button is blinking - I thought that this shows an activated Chorus 1+2 (Chorus-Mode 1_2), but this is not true…

[@Spartanx163x]

You need a midi splitter to play part a and b on separate midi controllers correct?

[@XNBeatsMusic]

if you are using two midi devices, then yes, because the synth has one input and needs to listen for two sourcers. It depends on what you are using with it. With a DAW, you don't need a splitter, just point the DAW track to MIDI 1 , and a different track to MIDI 2. If you are using a MIDI controller like a keystep pro for example, you have 4 tracks. Same idea, target each track to MIDI 1 & 2.

[@hugocaldeiravinagre]

thanks for the video. it's great. is it possible to assign the modwheel of a midi controller to the filter cut off? does it have any kind of mod matrix ?

[@XNBeatsMusic]

Thanks for the comment !! Nope you cannot, or I tried at least and I could not do it. Checked the manual and it seems it is not possible. But that would be great.

[@Stas3g]

i don't own it. but thank you to making a videos about Boutique series :)

[@XNBeatsMusic]

Thanks for the comment then :)

[@xvnvs8673]

Can i add some sample and synth it up?

[@XNBeatsMusic]

Hello. No, it's not a sampler. Just a synth :)