The secret of the third slot on a Victorinox PLUS Scale /SAK customize & maintenance Workshop(10/15)

Links for my books, Swiss Army Knives and equipment 👇👇👇
🇩🇪 🇦🇹 🇨🇭 Mein Amazon Shop: www.amazon.de/...
🇺🇸 My Amazon Shop: www.amazon.com...
🇬🇧 My Amazon Shop: www.amazon.co....
Compared to the "normal" scales, the Victorinox PLUS scales have a shaft for the ballpoint pen on the backside scale. This PLUS scales also have another slot. But the entrance to this slot is closed...at least on the most of the models. The only models were this slot is open are those models with a screen on the front scale. I will show you how to open this slot and how I use it.
Here you can order the Firefly Firesteel:
tortoisegear.com/
Here you find the playlist to my Swiss Army Knife customize and maintenance series: • Victorinox customize &...
Store for new scales: www.schweizerm...
Facebook:
/ felix.immler
Website:
feliximmler.ch
Used Equipment:
Victorinox Huntsman

[@duanebledsoe7566]

I think since it’s not going to look completely flawless anyway, then rather than shortening the toothpick from the head end, I would cut it from the tip end and reshape the tip, preserving the original head and avoiding the need for glue to recreate it, and then just file it to be rounded evenly on both sides. Also, cutting from the tip end gives the option to reshape it however you want, possibly making it into something besides a toothpick. Maybe a small plastic scraper to use on surfaces where you don’t want a metal tip to mar it up. I read once where someone used the toothpick to adjust dip switches on an electronic device. Maybe reshape the tip for better use with that.

[@samuels.4622]

It might be just right for a lock pick

[@D3nn1s]

@@samuels.4622 most likely not strong enough unless its a really crappy lock

[@jakefearing6640]

The rounding of the head of the pick would still be off you fucking idiot

[@MrDkgio]

Small tweezers, modded for lock picking, as per Felix’s video on lock-picking? You could lock other tool between tweezers, I’ve seen a video where someone “gripped” a needle (nykGyver channel?) other implements could be gripped using same trick?

[@MrDkgio]

kzbin.info/www/bejne/lZ7VdpmFgK6sm8U

[@funnguy6117]

Victorinox needs to start implementing this into their plus scales.

[@FelixImmler]

Thats my opinion too!

[@TheJoePiper]

I like that we crafts it all using a Swiss Army knife also! 👌

[@FelixImmler]

Thanks a lot Joe!

[@michaelafton9916]

Yep

[@Far-North-Bushcraft-Survival]

I have the regular Trekker model of Victorinox Swiss Army Knife. After watching this video I finally got the nerve to pop the scales off to see what it looked like inside. Plenty of room in there for some fish hooks and monofilament fishing line. Thanks for all you do and share.

[@FelixImmler]

Thank you so much my friend. Just let me know if you need new Plus scales.

[@cgraham1968]

This is great! Two guys I follow commenting on the same page! Really learn about from you, Lonnie!

[@Far-North-Bushcraft-Survival]

@@cgraham1968 Thanks Chris

[@wjf213]

Far North, did you come up with any way to store those fish hooks? Thanks.

[@Far-North-Bushcraft-Survival]

@@wjf213 To tell you the truth i had forgot all about this video and what it shared. However I have lost my Swiss Army Knife that I have had for many years when the belt sheath came off of my belt and dropped somewhere out in the woods last summer.

[@jgbsweeper7325]

Victorinox “Felix Immler” Model They would sell thousands !!!

[@FelixImmler]

To make a own model...that would be a dream 🤣🤣

[@keithwaite5026]

JGB Sweeper I would buy that one 👍

[@archivist17]

I'd buy one!

[@william_alba]

Count me in too!

[@MaddMystro]

Who's taking orders? I'll take 3. Felix will you be signing them?

[@dracamon]

Great video, Felix! I didn't even know the third slot was there until I watched this. I took this one step further. I cut off the end of the vertical edges where the pen slot and the original toothpick slot meet. This allows me to slide in a toothpick from a 58mm Swiss Army Knife without having to shorten it. The 58mm toothpick just touches the pen.

[@FelixImmler]

Super Trick! Thanks a lot!

[@matthewallen1715]

Definitely trying that! Did the head of the tooth pick already line up with the curvature if the scale or did you have to file it still?

[@dracamon]

@@matthewallen1715 The 58mm toothpicks have a straight head, not curved, so it would have to be filed.

[@grayintheuk8021]

I love that you are so happy and positive. This coupled with such well presented and excellent videos makes your videos my new watch list. Thanks so much Felix.

[@inkybinkyschpinky]

No joke, when you filed the bit out, I went to blow the filings off!! I'm going mad 😂😂

[@FelixImmler]

Thanks a lot for your funny comment!

[@hobojesus9817]

So glad I am not the only one...

[@paddymurphy-oconnor8255]

I don’t think it’s a hidden slot, but rather the channel is designed to add strength to the scales.

[@Pinki2019]

A lot of us have some extra free time due to the craziness in the world. A great opportunity to try some of these tips and modifications from Felix! And get out in the woods, too, for some extra social distancing!

[@FelixImmler]

I agree 100% !!!!!! 😃😃😃😃😃

[@wjf213]

This is a great idea. I've been looking at those slots and thinking about taking a plastic coffee stir straw and turning that into a tiny storage container to fit in one of those slots, and inside the straw I wanted to fill it with potassium permanganate for extreme emergency water treatment. Just seal up the straw and forget it as the PP has an indefinite shelf life, and that is enough PP to treat dozens of gallons of water in a very tiny package. I bet you could even fill the straw with part of vaseline soaked cotton ball for fire starting along with that ferro rod. Keep up the great work.

[@thierrygyde6490]

Hi Felix ! I found another way to carry the firefly AND the toothpick, with no modification of the toothpick. There's enough place inside the SECOND scale to carve a slot for the toothpick, parallel to the other slot. Then you can use the third and hidden slot of the other scale to carry a second pair of tweezers, with pointed ends of course ! Best regards.

[@FelixImmler]

Thanks a lot for this super idea!! Greetings from Switzerland

[@chrecky76]

Kannst du das bitte auch in einem Video zeigen!!! PLS PLS PLS

[@Treppiede]

Yes please, could you show this in a follow-up video? Thank you Thierry and Felix.

[@ministryoftruth8588]

No need to cut to shorten, then glue the head back on the 91mm model toothpick. Just buy a pack of shorter toothpicks for the 58mm Victorinox models. They're JUST short enough to fit in the hidden slot, whereas the angled tip of the toothpick rests over the center of the diameter of the pen in the pen slot. Just the plastic 'V' rail in the scale needs to be carved out because it gets in the way of the tip of the toothpick. Then file to round the head of the toothpick to fit the contour of the round scale.

[@timlarson1142]

Great video. I opened the hidden slot but instead of modifying the toothpick I just cut down the firefly and put it in the new slot. Much easier imho.

[@FelixImmler]

Super idea!

[@Florian_Ueberlebt_Australien]

That's exactly what I had in mind too and was just about to ask if someone had done that. Which size firefly did you use? The smaller or larger one?

[@jefferydoty5141]

Felix, You are an amazing man. The way you educate on all things Swiss Army knive. Your humor & knowledge is awesome. Thank you.

[@Ian.stearns]

I’ve seen that extra slot before and wondered what it was for especially since it was closed off. Thanks for explaining they used it for models with displays on the opposite side. I love firefly Ferro rods and this mod let’s you have all the tools! Now they are Plus-Plus scales or Plus+ or ++ 😁

[@FelixImmler]

Yes Ian...now i have PLUS PLUS scales 😂😂

[@garyhubbartt8351]

It's for stability, witch makes the handle scale stronger!

[@Andrew-en4zx]

You are such a loveable Swiss Army dork, Felix. Keep doing what you do, we love you!

[@FelixImmler]

Thanks lot for this woderful compliment!!!

[@gbro1988]

I love my Sak more and more every time I watch your video

[@FelixImmler]

Thant makes me happy. Thank you so much Gabriel!

[@nosreuter]

If I liked it?? Absolutely LOVED it !! It's awesome to see you use the actual SAK knives so naturally to do the modifications 👌

[@FelixImmler]

Thank you very much Simon!

[@nosreuter]

@@FelixImmler New subscriber for sure 👍

[@ronitsingh85]

holy crap, thats an amazing hack!!!!! i will put a small tweezer in there just for the fun of it, it will look cool with 3 tools tucked away in there. What I have is a cyber tool SAK. Its special cause on the back side (same side that has the hidden slot), the Cross badge is instead of the other side. The reason for this is because its got something long printed on that side (sequoia heritage) requested by some company to victorinox to do. I plan to take the front out and replace with another scale that traditionally will have the cross badge on it. It will become one unique SAK.

[@Flashahol]

Extra secret compartments! This is going from a SAK doctorate into a SAK spy secrets. Can't wait for when you show us how to turn the toothpick into an arrow! Seriously, great channel!

[@FelixImmler]

Ha ha haaaaaa, what a fantastic idea!

[@62Cristoforo]

That’s nothing. Just wait till he shows us how to access the GPS/Glanos transceiver found in the lanyard section

[@steverat4687]

After watching Felix I was inspired to try a slight variation, by continuing a cut further into the scale, increasing the length of the channel until it starts to cross into the pen channel. This lets you put in a normal 58mm size toothpick without modifications. It doesn't interfere with the pen at all, and saves the cutting and gluing of the 91mm size toothpick.

[@matthewallen1715]

Hey, that’s awesome! Probably going to do that next. Did the head line up with the curvature of the scale?

[@Scozzy_23]

I watch these videos in class during my TA block and so I have to keep the volume low and the captions on, and for a while I was confuse why it said “to speak” but now I realize you’re saying tooth pick and the captions just don’t know any accent but American 😂

[@FelixImmler]

Thanks for your funny comment!

[@keitharoo1962]

The joke about needing your glasses caught me off guard and made me laugh out loud. Thanks for the video.

[@FelixImmler]

Glad you enjoyed it 😀😀

[@Veldvaardigheden]

Hahaaa The firefly ! , replaces my toothpick but we talked about that last week or so. You replace nothing instead just adding tools ! Big thumbs up Felix ........thanks !

[@FelixImmler]

Thank you so much Martin!!

[@gianni231283]

How can i find that firefly file?My search is empty on google

[@gianni231283]

@Michael Harris already ordered, thanks!

[@fadingmargins]

I won't pretend that I have done every mod, indeed the one with the pin didn't work for me - I guess I made the slot too large. But every Friday there is expert tuition, simply and expertly delivered - a Friday institution - Thank you Felix.

[@FelixImmler]

Was the pin falling out?

[@fadingmargins]

@@FelixImmler Indeed it was falling out and as I have not found a generic supply of these pins too expensive to carry on with.

[@outlaweduk]

@@fadingmargins i used a different pin on mine it had the slot though,the pin that victoinox sell has a flat head i cant get to it, so mine has an embroidary pin with a round head looks like a ball on it as its larger it rests against body of knife (duh i never thought of of using tweezers to get pin out)

[@johnearhart8811]

You are amazing craftsmanship on SAK. Congratulations. Love your videos

[@FelixImmler]

That makes me happy. Thanks a lot John!

[@Valentin-vd8gz]

When I see the notification, I'm very excited to see what I can learn about my favorite object !! My SAK il already in my pocket !! 🇨🇭🇨🇭

[@FelixImmler]

Hello Valentin. Thanks a lot for your comment!

[@parkinsontatak]

I love this guy, he is so funny and watching him feels like I'm actually talking to a friend :))

[@DPRoberts70]

Thanks Felix. You’re always happy and it makes watching your videos fun 😀

[@thomasbaptist]

Second glue. How nice !

[@WEKM]

It's nice to see Vetrinox modifications. I've seen so many Leatherman modification videos.

[@FelixImmler]

Thanks for watching my videos.. may be you get also an inspiration for a leatherman mod.

[@outdoor-buddy]

Hey Felix. Wusste gar nicht dass da nochn Slot ist. Bin wieder mal begeistert

[@FelixImmler]

Danke mein lieber Freund!!

[@Indy1701e]

Sehr schön! Bis vor kurzem wusste ich nicht mal, dass es einen Slot für ne Nadel gibt und nun auch noch das. Genial!

[@FelixImmler]

Vielen Dank!

[@richardrogers7]

Thank you so much. I had given up my Victorinox for my Leatherman Charge. You have changed my mind and I am looking to use it as my EDC. Be Well and Good Journey Richie

[@KEIL450]

Wie geil ist das denn bitte!!! Das man die Pinzette spitz umschleifen kann mach ich schon seit 20 Jahren für meine Kunden. Aber das Kürzen vom Zahnstocher is ja mal echt GENIAL

[@FelixImmler]

Danke! Cool, dass du auch Spitzpinzetten magst!

[@KEIL450]

@@FelixImmler das sollte mal Victorinox überdenken

[@ralfheyn7649]

Danke für Deine Videos. Danke auch an Deinem Team.

[@FelixImmler]

Vielen Dank lieber Ralf..werde ich gerne meinem Kameramann ausrichten!!

[@mustafakemal62]

Hey Felix, this one is really a fantastic video. I learn a lot from your channel. Thanks man.

[@thomaschainey3230]

Great modifications thanks

[@mendoeta]

Thank you very much FelixMeister. Your tips are always rewarding.

[@FelixImmler]

Thank you so much my friend!!

[@zzzebulon]

Next step : built a sak with a sak. This guy is awesome !

[@FelixImmler]

Haa ha haa, good idea :-D

[@ianrtilley]

Another great Video Felix, I have just fitted two side handle (scales) on a 91 mm pocket knife that I carry all the time, I Brought the "see through" red.... It has made it look like a new Knife. I didn't realise that the Black handles had the pen slot... very useful tips again.... keep them coming , All the best Ian (the palm weaver)

[@FelixImmler]

Thanks a lot dear palm weaver artist!

[@topgunhorse]

It's not just the black scales. You can get most scales in what they call +scales, these are standard on knives with a pen.

[@timsummers870]

I didn't know about Firefly until I watched this video. Felix always surprises us. I'll definitely buy a pack as soon as the coronavirus scare is over. Thanks again for the awesome video.

[@scottmcintosh2988]

Genius the best of both worlds ! We need Generals in NATO like you !

[@FelixImmler]

Thank you Scott

[@johndoe-id2uh]

BRAVOOOO u really the only one who has. A vid on the modification I wanted. plus scales and with this set up on a Swiss champ I feel like thanos with the infinity gauntlet

[@rompommespiekerk3034]

Ja super die ide hatte ich noch nicht danke fur die triks Felix

[@FelixImmler]

Vielen Dank für den Besuch auf meinem Kanal!!

[@Joe.kazinsky]

Aprendi muchos trucos con mis saks gracias a vos. Excelente canal. Saludos desde argentina.

[@alex-loxa]

Nicht nur, dass sie ein Schweizer Taschenmesser modifizieren, sondern sie modifizieren es auch noch mit einem Schweizer Taschenmesser und zeigen somit die vielen Anwendungsmöglichkeiten dazu. Super Video

[@FelixImmler]

Herzlichen Dank!

[@sojournerdelaterra6144]

@1:40 ".......and my glasses". I tell you they save me tons of frustration too LOL.

[@FelixImmler]

🤣 🤣 🤣

[@philipw7557]

Nice one Felix another good trick 🇳🇿😎👍

[@FelixImmler]

Thanks a lot dear Phil!

[@claudegiguere8731]

Many thanks for your very interesting and funny videos Felix 😊

[@FelixImmler]

Thanks a lot for watching!

[@45auto]

I had never heard of the PLUS scales, thanks.

[@FelixImmler]

Thanks a lot for your comment. The first reason why i like the PLUS Scales ist the slot for the Pen.

[@tranquildoe]

Genius! I'm definitely going to do this.

[@seenochasm7101]

Finished this mod today. I’m not that experienced with this stuff so it took me a couple days of short sessions, but it is great! Thank you!

[@bormatnor]

Like the changes, like the ferocium addition. Not sure on gluing the toothpick, I hope it holds up good. I'm thinking light sanding would hold up better in extreme cold weather. Good videos I enjoy watching them.

[@FelixImmler]

Thanks a lot for your honest feedback!!

[@Andmclnpl]

Hey Felix, just discovered your channel and I'm loving it! A question that maybe is naive: why don't you cut the toothpick on the other side, so you don't have to glue it back together? Cheers from Geneva and congrats for the great content! :)

[@paulhorn24]

@@Andmclnpl Weil der „Kopf“ vom Zahnstocher wie erwähnt falsch herum ist, also die Rundung. Der echte Schacht für den Zahnstocher ist ja auf der anderen Seite der „Kurve“.

[@micha5645]

Genialer Trick, Felix! Habe mich noch über den verdeckten Schacht gewundert, als ich die Plus-Schalen an mein Huntsman anbrachte. Bleib gesund! LG Micha

[@RUMCYCO]

Hi Felix!!. I've got a .....suggestion with the toothpick mod .Don't cut the tip/ head off and then superglue to re -atttach. Just cut the "pick " shorter and then shape . Much love from Australia 🤩🙏👍😁.

[@davidkurle5418]

Thank you for the great video Felix! That's a neat modification!

[@FelixImmler]

Thanks a lot for watching David!!

[@remowo_]

Great mod Felix! Needless to say that @5:05 when the plastic part flew away your reaction was priceless and funny. Cheers mate

[@FelixImmler]

Thank you!

[@rafaelperez1111]

Nice video thanks for showing 👍🏼🇨🇭👍🏼

[@FelixImmler]

Hello Rafael. Thanks a lot for watching!

[@william_alba]

Wow, this is *precisely* the modification I attempted last weekend and will try again now that the work week has ended! I initially used the small blade to open up the slot, but found the metal saw is much better, as you demonstrated here. I do also use my toothpick slot for the Firefly firestarter. And I also found that I had to shorten the toothpick, but I just snipped off the tip with scissors before rounding the head of the toothpick with a file. One suggestion: the scale scuffs easily, so this time I'll apply masking tape to it.

[@william_alba]

By the way, I shortened a *short* toothpick (the one for the 58mm knives and the SwissCard). The head of the short toothpick is symmetric, so it's easier to shape to match the curvature of the slot opening. However, if you snip the tip, the new working end of the toothpick is thicker, because you're working with the former shaft. Right now I myself actually prefer this stronger tip.

[@william_alba]

One more note: Tortoise Gear, the people who make the Firefly firestarter, have a Kickstarter campaign going on right now. They're making a FireAnt firestarter and Helix tinder, both of thread into the corkscrew. I'm actually more excited about the Helix tinder, because I already have a Firefly and like the Victorinox mini screwdriver, but the FireAnt is certainly clever too.

[@FelixImmler]

Thanks a lot for your comment. Yes the trick with the tape is a good idea!

[@FelixImmler]

Thanks a lot for this valuable tip!

[@FelixImmler]

Yes, i saw this FireAnt. Seems to be a good idea!!

[@Captain-Electro]

That knife is packed full of goodies!

[@FelixImmler]

Thanks a lot brother!

[@billythepigeon7345]

Another neat trick/mod. Best vids on KZbin, keep up the good work.

[@FelixImmler]

Thank you so much Jim!

[@JeremiahMyers-o9b]

Great video, very appreciated and thank you.

[@MSnow-1967]

I have added the Firefly ferro stick to all of my SAK’s, they are great!

[@kingtoad2234]

Cool dude don’t even have a Swiss Army knife but toad approves

[@FelixImmler]

Thanks for your visit on my channel!

[@anthonybarra2391]

Thanks for another informative and very interesting video, great work as always , hi from 🇬🇧 UK

[@FelixImmler]

Thanks a lot Anthony!!

[@ehoenig]

Hey Felix! There are two things I celebrate every week! The first thing is the Apfelfunk Podcast coming every Tuesday (with the swiss guy Jean-Claude Frick) - the second thing I celebrate each Friday is *DrumRoll* - your video coming every Friday! so I can say - you guys from Switzerland really make my week! Another really great video, thank you very much. I did it a bit differently: I bought on ebay Woodscales and carved slots in it for tweezers, toothpick, pen and Firefly, but on different position, because I was not aware of this. I was just a bit upset to have it all nicely finished and glued together and then watched your video about the second needle - I just have one needle :-/

[@FelixImmler]

Hallo Elmar. Danke für Deinen super interessanten Kommentar! Ich würde deine Variante aus Holz der Plastikgriffschale bevorzugen. Wie hast Du die Schlitze ins Holz gefräst?

[@ehoenig]

@@FelixImmler gar nicht gefräst; ich habe vom Cybertool L auf der Rückseite den "Holzmeissel" genommen für die Vorarbeiten und speziell für die Ränder. Den Rest mit Schmirgelpapier und das Ergebnis ist toll geworden. Ich wollte das gleiche mit meinem Forester machen, aber hier funktioniert das nicht, da die Schalen nicht aus einem ganzen Stück Holz sind sondern Furnier. Hier muß ich wohl Schalen auch selbst fertigen (mit meinem Cybertool L natürlich 😀).

[@snowjoe43]

Excellent mod. Felix! Thank you, keep them coming.

[@FelixImmler]

Hello Joe. Thanks a lot for your valuable support!!

[@xst-k6]

great idea! I would have personally filed down the firesteel instead of trimming the toothpick

[@FelixImmler]

Thanks for your feedback!

[@pnyarrow]

Hi Felix. Danke fürs mitteilen, die videos sind imm(l)er gut. Bleib gesund. ATB. Nigel

[@FelixImmler]

Haa ha haaa danke Nigel!

[@Kai-pq9lg]

Hallo Felix, Super Tipp. Hab ja jetzt viel Zeit um deine Ideen nachzubauen, da die Zwerkstatt gezwungenermaßen geschlossen ist.😭 Alles Gute für dich und deine Familie, bleibt gesund. 👍 Gruß aus der Zwerkstatt

[@FelixImmler]

Vielen Dank! Das wüsche ich Dir und Deiner Familie auch!

[@KernowEDC]

Dude, I always love your videos and how fun you are. Thank you and keep the great videos coming!

[@saviom8166]

Only a couple of weeks ago, I spied this in my AVT scales, and the translucent plus scales. I wanted to do this exact same thing to my plus scales.

[@FelixImmler]

Super. Good luck for this project!

[@matthewshannon6946]

Nicely done!!!

[@e.s.l5861]

Nice job! I wish though that they’d make a ferro rod that fit the little slot or wheee the tweezers go. That way a guy could get the short tweezers and be good to go. I find I use the tooth pick on my Swisschamp way to much to jack it up

[@la_trastienda]

Very resourceful and ingenious my friend. Thanks a lot

[@FelixImmler]

Thanks a lot for your positiv feedback!

[@marcodesantis3760]

This is the best mod I’ve ever seen

[@FelixImmler]

Thanks a lot!

[@OdeeOz]

Something I never knew, & I have had Victorinox folders since the 60s

[@FelixImmler]

Super, your comment makes me happy. Thanks a lot for your Feedback!

[@andreborsch2266]

Hallo Felix! Tolle Idee. Wie immer! :-) Alles Gute, André

[@FelixImmler]

Vielen dank lieber Andre!

[@nesvarog14]

Bravo, excelent up grade. Mr. Felix Thanks

[@FelixImmler]

Thanks a lot for watching!!

[@SVtgr8]

you sir, are a genius

[@FelixImmler]

Thanks a lot Peter!

[@sanyablogger]

Good ideas and thanks for a interesting video Felix 👍

[@FelixImmler]

Thanks a lot for watching!

[@sanyablogger]

@@FelixImmler 🤝

[@pigsnuck]

Your tips are amazing! Thank you!

[@FelixImmler]

Thanks a lot!

[@reconty2133]

Great video! I’ve got to try this one. Really enjoy those tips and tricks. Keep ‘em coming!

[@musicandcoffee2853]

Absolutely fantastic brother👍🏼

[@FelixImmler]

Thanks a lot my friend!

[@dtroutmann]

I like your idea that said you can Skip One Step and not move the head of the toothpick just cut it to Lake reshape the tip and reshape the head done the Integrity of the entire tool would remain higher quality and stronger you shouldn't snap the head off and then glue it back on just leave the head on and reshape it you're doing it in the next step to anyway reshaping the tip of the toothpick is also beneficial because you can get a custom tip shape for your teeth that work better this is a case of less is more again thanks for the video great idea you're just adding steps that aren't necessary and then actually compromised the tool

[@FelixImmler]

Super idea. Thanks a lot for your hint!

[@gvigil609]

excellent job

[@FelixImmler]

Thanks a lot!!

[@lizn2565]

Already did this one last year. It's a good mod! The only thing I did different was to shorten the pointy end of toothpick and round existing pull end to fit contour. Might try your way as I have plenty of toothpicks.

[@FelixImmler]

Your way is probably lot easyer!

[@lizn2565]

@@FelixImmler Made a new one same as above got to thinking. If the width was decreased a bit on the sides where it was hidden inside the scale, thread or dental floss could be wound. Haven't tried yet.

[@robhead22]

What an inspiring video!! Thank you!

[@FelixImmler]

Thanks a lot Robert!

[@JENNISWISS]

alles ausgenützt. clever felix👍

[@FelixImmler]

Danke mein lieber Freund!

[@tinsoldier5621]

Why didn't you just turn the toothpick over? Then shorten and reshape the tip instead of cutting it into pieces and wearing it and using glue that will eventually fail and cause problems? Also can you fit the tweezers toothpick the pen and the fire steel onto the scales on the compact? Thank you

[@FelixImmler]

Because then the bevel looks on the wrong side if i do it like you said. But it's also a good way to go...no doupt.

[@divineantiwokegangster]

this is ahead of victorinox designer team

[@FelixImmler]

Thanks a lot for your comment

[@Explorerwolf]

Great Felix, good modification a greeting!

[@FelixImmler]

Mille grazie amigo!

[@levinskki3825]

Hey Felix, great Video as always! Why don‘t you put the Firesteel into the tweezers slot and just use the small tweezers instead? Then you wouldn‘t have to modify anything.. Fründlichi Grüess usem schöne Thurgau :-)

[@FelixImmler]

Das isch di best Lösig!! Dankä!

[@Happyheart146]

You're nuts but very clever! Subscribed :) Great video, thank you.

[@josercarlucci]

Nice job Felix, thank you!

[@FelixImmler]

Thanks a lot my friend!!

[@akbirtchison6573]

I kept my full sized tweezers and shortened the tooth pick to fit in new slot. I cut off point of tooth pick and built up the head with instant glue and baking soda. Then reshaped head as needed.

[@FelixImmler]

Wowwwwwww, what a fantastic Trick!! Thanks a lot for this valuable hint!

[@vicioussalta]

There's another option for modifying the toothpick. Recently I bought a replacement toothpick for my 36 years old Champion (it was my dad's EDC), but the seller sent the smaller ones for the classic instead. The head is smaller and the cutout is straight, so I used baking soda and a drop of superglue. Then I filed it to shape and got a much stronger toothpick head.

[@МаксимКиевский-г4щ]

Спасибо за ролик! Очень полезно!!! У вас хорошо получается))) Привет из Сталинграда!

[@spartan4428]

Максим что он сделал, я не понял

[@dcc222]

It's some very new:-) nice:-) Thank you

[@FelixImmler]

Thanks a lot for watching!