ShopJimmyO.com Support the build!! / jimmyoakes / jimmyoakes Send some sub mail!! Jimmy Oakes PMB 169 61 N. Plains Industrial Rd. Wallingford, CT 06492
Пікірлер: 337
@b.rod363 жыл бұрын
"It's got more seat time than the red Z!" LOL
@zector03 жыл бұрын
I've been a subscriber for a few years now, and I have never seen any of the Z's run
@marcuscooke40333 жыл бұрын
@@zector0 zs ent ran since he moved shops
@kurtseyffert66493 жыл бұрын
@@marcuscooke4033 well thats a lie he drove it last yr he posted it on ig he just doesn't vlog it
@willydmankal3 жыл бұрын
@@kurtseyffert6649 didn't he put a cam in the red z not that long ago?
@alicastro62623 жыл бұрын
The Sr20 Z runs. Not sure about the LS swapped.
@tylerhess91353 жыл бұрын
RJ is such a huge asset. He’s working hard for this channels success
@240justin73 жыл бұрын
jimmy: ka transmissions are getting hard to come by also jimmy: has 10+ transmissions in the corner
@kasper_4293 жыл бұрын
Kinda like Adam with the Blitz 03s. They're hard to come by because he has all of them, lmao.
@240justin73 жыл бұрын
@@kasper_429 pretty much lmao
@rowaldwousie52893 жыл бұрын
This is the most awesome firend group channel type on youtube in my opinion, and also all share the passion of cars. This guy deserve's more subs just like the unfiltered channel of this! Keep it up boys
@kylehampshire7493 жыл бұрын
That far wall needs to have like 4- 4 post lifts to store cars that don't move lol. Would open up more room in the shop also
@lazy11263 жыл бұрын
some day itll be that way
@wfcmusicandskatecrew16453 жыл бұрын
“Plenty of people have drivers license n can’t drive for shit”🤣 I don’t think truer words have been spoken
@samuelvaleriano51863 жыл бұрын
I may not be first I may not be last but when I see a jimmy Oakes video I click fast
@bushtruck3 жыл бұрын
My channel is way better than these guys and I could beat them at pretty much anything.
@finhouston75003 жыл бұрын
@@bushtruck what are you 5?
@DNASocial3 жыл бұрын
@@bushtruck your comment alone tells me that your channel is not better
@Apollo57523533 жыл бұрын
@@bushtruck you sound like a high schooler that just got their first car, get off your high horse
@bushtruck3 жыл бұрын
@@DNASocial To each his own opinion. Thanks for the comment!
@misty_slidez3 жыл бұрын
Suggestion: ask Adam if you can sell his steering wheels. That would be dope, they would look so awesome in the store
@ritenour123 жыл бұрын
Adam does such limited stocking of those might not be worth it since jimmys gata profit
@joellabrecque56963 жыл бұрын
When Jimmy's shop is getting more equipment than my job lmao good job Jimmy
@mediawalldisplays30563 жыл бұрын
Welcome to Jimmy oaks bendpac instalation channel Good freaking work boys
@bryan_turner3 жыл бұрын
"The thing don't fit in the hole" "Spit on it"
@cainthornburgh66303 жыл бұрын
Jimmy get more promotional banners for your background behind the lifts, especially ones for your business 👀 use that giant background that is in every video ❤❤
@JustinJehle3 жыл бұрын
Making some big freaking moves. Happy to see you killing it.
@Belialzero3 жыл бұрын
Literally the only you tube videos I'll watch until they stop. Keep up the great work and thanks for the content Jimmy and crew.
@alicastro62623 жыл бұрын
Engr. Jimmy is so satisfying to watch and listen to, this is why finishing a college degree really pays off at the end. If you can't make it on KZbin you can still be an engineer or whatever you took in college.. :)
@thewastedlama23243 жыл бұрын
Need to sort out some racking for all them boxes and motors, Third lift should definitely go where Sammy's car is, definitely wouldn't want to block the last loading dock..
@zkjel1253 жыл бұрын
Jimmy and crew have quickly become my favorite group to watch on KZbin. Love to see the fun you all have every day!
@user-tw9su8rb9j3 жыл бұрын
Visine works wonders 😂😂, loving the progress 👌🏽
@Mojoqwerts183 жыл бұрын
A new lift is always a big deal, but Jimmy went from several days/videos of install to a nonchalant vlog install! You love to see it.
@thatguyroute763 жыл бұрын
See jimmy oakes and Mikemyke are my two top must watch Just cause I feel like I'm there with them 🤣 they make u feel like you're family
@davidfloener75393 жыл бұрын
Congrats on the sick shop upgrades, things are looking good over there! Btw Djnoway's channel is pure stoner gold!! Nice work fellas
@kylesettles96823 жыл бұрын
union ironworker here always thread your nut all the way up when hitting in wedge anchors to prevent mushrooming the tip.
@thg_garage3 жыл бұрын
Love the way the shop looks , looking better by day🔥🔥🔥
@initialspeed3 жыл бұрын
Super official now !! Good job man. You have come a long way. We are just getting started.👍🏾
@jamesvesely1313 жыл бұрын
Proud of you Jimmy! Hard work pays off and it looks amazing!
@todd_macdonald3 жыл бұрын
This video was very “uplifting” !!!! A thank you.
@haithamalbalushi88373 жыл бұрын
looks awesome you need a 4 post and heavy duty shelves to organize the shop a bit more
@icyphilippe3 жыл бұрын
idea : get the lift back from DJ's bay, but it where the 4 posts is, use the 4 posts and the dinon against the wall in front of the last dock and get the short man a short lift
@MikeyMikeTHRoriginal3 жыл бұрын
When you don’t want to take your project cars off the lift so you just buy a new one.
@gerrymilidantri64573 жыл бұрын
Nice looking shop James , really laid out well
@nelsonvb37863 жыл бұрын
I learn more from these videos than I did ever on school
@Colyers3 жыл бұрын
Your shop is so official!
@jamesryder29613 жыл бұрын
3rd lift by the new one and then another 4 post by the other so you don’t lose any storage and the shop would look even more sick
@deeeekayyy46663 жыл бұрын
Move the 4 post into the middle of the lifts for the dyno and put the new lift where the 4 post is and ki!! 2 birds with one stone
@BenjySparky3 жыл бұрын
Jimmy and crew y'all rock and are a bunch of great friends! Love the channel and content keep up the great work! I'm here for the algorithm! Peace easy and get that v!
@ericgreen56053 жыл бұрын
The front of that scissor lift also comes out there should be latches on the rail closest to the floor of it stomp it and push it forward
@juumoro59783 жыл бұрын
3rd lift to left next to lift#2. Imagine the wideangle picture when you enter the shop
@Godzilla323 жыл бұрын
Well done Jimmy, love your work!
@waterlover3 жыл бұрын
Time for a pair of double stack lifts to clear up some room and have four cars in two lifts
@mitchisevil56713 жыл бұрын
Need a picture of the s14 on one lift, s15 on the other, an the s13 on the dyno be legendary
@iquad12343 жыл бұрын
Now you just need more 4 post lifts to get floor space or ship a couple cars to the LZ compound
@ritenour123 жыл бұрын
Jimmy has an entire new shop why would he ship cars off to florida
@iquad12343 жыл бұрын
@@ritenour12 have you seen Adam’s compound? If I had multiple drift cars like jimmy I would send at least one down there. Besides the other shop is more garage space for DJ.
@charliel-v31243 жыл бұрын
Torque spec is 150ft lbs for the concrete lags. . inspection torque at 85 ft lbs for sign off on safety sheet.
@BrokenSilvia3 жыл бұрын
Shops looking good man!
@Mojoqwerts183 жыл бұрын
Maybe put the third lift where the dyno is and move the dyno over to the space next to the office.
@FBkid4153 жыл бұрын
Jimmy bro hear me out. Put a lift where the z32’s are at and move the 4 post and get 2 more 4 post on the wall that’s “storage” 🔥🔥🔥🔥
@nelsonbeaumont45153 жыл бұрын
Next time u put a lift in measure the lag bolts and go 1inch less then the length of lag thats how deep you should drill its supposed to crush when you hit the bottom of the hole then the lag crushes and mushrooms out to plug the hole Shop is coming along nice
@fallenbullseye3 жыл бұрын
love to see it - happy for you jimmy
@cd5sircoupe3 жыл бұрын
I'm feelin the other comments recommending another 4 post or two along that side wall. Gives more room for activities, or rather, ability to have more cars in there.
@shorty666_73 жыл бұрын
Gotta give it to RJ with his precise forklift skills
@LucasKuerten3 жыл бұрын
a pic with the s13 on the dyno would look so freakin cool
@anthonysterling13 жыл бұрын
Need to do a four post lift out side the dyno door to be able to to dyno low azz cars (might have to build small ramps to bridge the gap of to the dyno )and can use it to be able to wash the under side of the cars before you start too take them apart
@congratsshinji40133 жыл бұрын
13:15 hurt me Jimbo, hopefully whoever does your annual sprinkler inspection is chill lmao half my coworkers would write it up
@gerrymilidantri64573 жыл бұрын
James go with a 4 post lift you can work on it and have double storage
@jerrythao52813 жыл бұрын
Put the other 2 Schassis in the middle and that’ll be a Perfect Picture
@tarasenko423 жыл бұрын
Put a lift angled by the office side then mirror in the other side, 4 lifts in a diamond would be sick
@ronniesawyer22133 жыл бұрын
Lmao 😂 said DJ: TOO EASY TURN THE DIFFICULTY UP RJ 😂😂
@jackdavignon38893 жыл бұрын
Congrats jimmy, keep it up man
@blahblahblah55343 жыл бұрын
you guys should put the z lifts against the wall with all the cars and make that a "storage" wall where you keep cars. kinda like illiminate?
@thenjmway3 жыл бұрын
It’s always good when Ants dad pops by!
@jamesfcookjr3 жыл бұрын
Jimmy you should’ve squeezed some Apoxsee in the holes before you put the anchors in I’ve witnessed cars on the left because the bolts tear through the foundation 🤯😱😊👍
@enzorichon99563 жыл бұрын
If he know how to balance a car properly and don't remove big chunk like an engine without reajusting it he'll be alright
@DarkFire98893 жыл бұрын
Nice guest appearance from "Jimmy The Foot"
@jukkaliukkonen35123 жыл бұрын
3rd lift infront of the bathroom, between the post and the office.
@shanekdiesel3 жыл бұрын
The growth!!! I love it!! Congrats!!!
@dd100883 жыл бұрын
The shop is looking SICK! Nice job boys.
@4XFAMILYADVENTURES3 жыл бұрын
We need a yayaya Derrick shirt
@danielodling86363 жыл бұрын
Stacker or 2 needed and will look mint and make more space as we know you we goin tp see another car b4 the Silvia or 2 are done 🤙
@34cooldog3 жыл бұрын
Now there “Oakes Garage” and the shop is Oakes “Garaaaage Garaaaaage”
@itsfqndave3 жыл бұрын
Fuck yes. New lift time! Let's. Fucking. Goooooo!!
@AlaskaTony3 жыл бұрын
so pumped for the upgrades!
@bengeisser3 жыл бұрын
Next one of those ultra flat welding tables!
@wilfredotuzonrps133 жыл бұрын
Imagine his S13 Silvia on the dyno, with the s14 and s15 with their frontends... 🤤🤤🤤 we need to see that
@shawnneidecker6903 жыл бұрын
Aye I see that lucky.labo flag shoutout to lucky for being the best in Arkansas
@bigolbeee3 жыл бұрын
Rj on that lift game n Dj full zoot mode 24/7
@ardennielsen37613 жыл бұрын
need to have enough wire coiled on the lift post, so that if the lift fails... it wont rip the electrical cable causing more problems.
@Mojoqwerts183 жыл бұрын
You should paint the wall behind the lifts!!
@halfameatballz3 жыл бұрын
Jimmy "Da Foot" returns!
@hrk4703 жыл бұрын
Also super pumped to see other shop getting a lift also!
@stephenwilson39993 жыл бұрын
I wanna see 2 or 3 more 4 post lifts for the cars on the side it would look so sick and give more room for activities!!
@foamdataservices3 жыл бұрын
I hear there is a guy in Florida with a whole warehouse full of storage lifts that he might sell....
@jimshort65763 жыл бұрын
Big moves! Cant wait for the new merch designs!
@paullongsden94133 жыл бұрын
Getting a top shop together 👍
@xXxNI7R0xXx3 жыл бұрын
Should put the s13 on the dyno so it's a full s chassis line up 😉
@froggytv23 жыл бұрын
Throw some grease on the cables👍🏻
@ABomB42o3 жыл бұрын
I had the same forklift but it had a 6k counter weight. Great machine. Only issue I had in 10yrs of daily use was the propane diaphragm needed to be replace.
@LeninVera3 жыл бұрын
Looks great!
@davidyarbrough21973 жыл бұрын
You will have to do a shot with the clean s13 on the dyno with the s14 and s15 on the lifts.
@IluvzShuffle3 жыл бұрын
B Hall with the fresh trim looking spicy
@pipero20133 жыл бұрын
Take a pic of the 2 fairladys on the lifts
@420architecMindNDesign3 жыл бұрын
I wait patiently everyday for a jimmy video, thanks James
@atm51463 жыл бұрын
Beautiful car shop 🤟🏼
@MrSimulatedsanity3 жыл бұрын
Nothing more exciting than new shop equipment!
@TheNanGod3 жыл бұрын
8:11 hahahah we need more z32 love
@itzju-baru3 жыл бұрын
Put a lift for the storage cars for more space for more cars.
@Turtlewang753 жыл бұрын
I think putting a lift where the s13 is would be perfect
@tommytsg77423 жыл бұрын
Great job Jimmy :) you definitely need a second 4post lift (maybe two :D) to save some car space :)
@shona55123 жыл бұрын
Yeah definitely two more. One next to the current one where the S13 is sitting, and another one in the area where Nissonda is. Then one more 2 post lift where Sammy's car is. It would leave the shop perfect.
@joshfullbright76783 жыл бұрын
LTL home boy killed it
@tylerelliott63073 жыл бұрын
I think you need too put front ends on the cars and load s13 onto dyno for pics 👌
@Almightyrastus3 жыл бұрын
I think we need a project scissor lift at some point. Full service, and......... well I was just about to say paint job, but yeah... ;-)
@KaneLidster3 жыл бұрын
3rd lift has to go on the left side some what angled like the others! Even if its just used to store a car on top and one under 😂
@murderedjku3 жыл бұрын
jimmy needs to get himself some pallet racks..get those engines and transmissions off the floor!