The Slynx: Singapore's 300fps Bullpup Nerf Sniper!

[@mainstay.]

I have to give a thumbs up and respect to Kimchi for releasing the files, free of charge. Once again I thank you Bradley for bringing us a blaster that I wouldn't have discovered otherwise. I love my 'standard' Lynx but am definitely printing a Slynx. I think I will have to do a bit of research on finding a compatible spring for here in the USA as it looks like it might be too expensive getting one from Carousell.

[@BradleyPhillipsYT]

Guessing you could just use your standard springs but longer

[@mainstay.]

Could you give a rough length of that new spring, yes I can handle metric :)@@BradleyPhillipsYT

[@zenden9]

He wants to promote the nerf dart hobby. It's a good intention to give out the design.

[@BradleyPhillipsYT]

​@@mainstay.23cm

[@kahwengliew7697]

It basically an extended Long shot spring. Here are the specs in metrics: Wire 2.2mm x OD 30mm x L 250mm x Coils 20- 270fps Wire 2.3mm x OD 30mm x L 250mm x Coils 20 - 300fps if you find this useful pls pay it fwd by making a donation to your charity of choice . Merry Xmas to you and happy holidays.

[@FortycadeConcept]

if they make this shell just like the harrier, will be the best blaster ever. i get it next day.

[@ethanjones1551]

This is amazing! I love my lynx and it’s my favorite blaster I own. If Worker or some other company would make an injection molded Slynx (hopefully styled like the harrier), then I wouldn’t care if it cost $300; I would just give them my moneys!

[@BradleyPhillipsYT]

Agreed, would love one of these injection molded

[@jemeljordan-butler4510]

That first shot on the accuracy test, though! Whoo!

[@GrandmasterHobbyist]

Showing air volume of all those blasters was exactly what i was looking for! Do you know the volume of the harrier/seagul or any other popular blasters not on ur list at 3:20

[@TheSybermedic]

I love my Lynx that I got from Silverfox Industries here in the states. I agree with you, if someone makes an injection molded or metal Lynx or Slynx I would gladly buy it.

[@rmfberry261]

the one and a half banaanas had me laughing. the sd is impressive

[@m00k61]

Man I really need a printer. I love my Lynx and this looks like a really awesome improvement.

[@NepDouble07]

All aluminum BCARS should be designed with that clamping mechanism. It's fantastic. Using set screws or friction fitting sucks.

[@callsign_bred755]

singapore pride!!!!

[@cutsleeve117]

of course the singapore mod is a bullpup, it's what we're trained on!

[@jonmandelbaum5395]

I heard someone is working on a Lynx AEB. If that’s possible then hopefully it could be done with this. Re injection molded, I got a unicorn last year and it got me hooked on reinforced nylon. Also it came in white but that’s ideal because then you can dye it any color at all, which ends up more durable than any paint

[@HiepLe-pe5hu]

I printed a Lynx in full nylon carbon fiber and nylon glass filled. I am tempted to make one of these in those materials

[@kahwengliew7697]

so am I

[@runesrensen8551]

its an amasing blaster. the easy prime VS the FPS is quite incredible.

[@chrisschemmer1978]

I think if the plastic parts were injection molded with an aluminum cap or insert for the sling mounts with an aluminum trigger, you’d have a fairly affordable easy to mass produce product that would be highly sought after.

[@BradleyPhillipsYT]

If it was made injection molded with the same quality as a Worker Harrier or Seagull I think it would be incredibly popular. The other issue it has currently besides being 3D printed is that no one is selling it, so it's hard for people to access.

[@chrisschemmer1978]

@@BradleyPhillipsYT I definitely agree that it would be very popular. Kind of a bummer that no one is selling it yet.

[@jmgerraughty]

Is it possible to modify a Lynx into a Slynx by swapping the Kimchi-modded parts in for the originals?

[@rothmel3]

Im stuck.. everything is good to go except the trigger/ sear mechanism. when I install the sear it forces the trigger all the way back in the "fired" position. I cant figure out how to fix this issue, please help if you have any insight.

[@dot0verdrive]

Hey I think you should do an accuracy vid using the same bcar. You are using that 18 bearing bcar with the apex prime, but only a 12 or 15 bearing bcar with the harrier, slynx, or even kirin. Assuming that the apex prime is more accurate, but having the prime be the only blaster to use that $115, 18-bearing bcar seems like faulty testing.

[@BradleyPhillipsYT]

I used the BCAR recommended and provided by Kimchi. But yes, a $115 BCAR is going to perform pretty much the same with every blaster given the same velocity and darts.

[@seniorxj2931]

Would love to see if this can handle a heavier spring!

[@BradleyPhillipsYT]

It definitely could, the original could handle a 20kg. You'd need an even longer barrel to make the most of that though which kinda takes away from the good part of this blaster.

[@seniorxj2931]

@@BradleyPhillipsYT, true but it would be cool to see how much more fps you could get out of it.

[@kahwengliew7697]

@@seniorxj2931, the platform was designed to max out at 300fps because that is the FPX cap which we typically play for high FPS game over in Singapore. If you would like more Juice, try the Lonx. My other go to highblaster blasters are Sabre Xgenesis, perhaps you can consider the Apex Prime if you are after FPS and if you do not mind if it is not a bullpup.

[@ScienceFoxxy]

For any changed hardware , it would be nice to know for building

[@kahwengliew7697]

I don't understand your question. Do you mean swap it from Metric to Imperial?

[@ScienceFoxxy]

The files explain the different hardware, but I am not quite sure what different pieces I should get to construct it

[@aidenzhang4324]

There is a blaster called the Lonx, or longer lynx, its basically the same ac the slynx but I would love to see a comparison

[@BradleyPhillipsYT]

I believe the Lonx is even longer than the Slynx from what I hear, so a little more power at the expense of having a longer blaster and longer barrel to utilise it.

[@aidenzhang4324]

@@BradleyPhillipsYT Where do you find the hardware for the slynx?

[@kevinschuurmans7738]

Could you be kind enough to post a link for a metric hardware kit for my lynx. Can this slynx be built with original lynx 3d parts. Cheers in advance

[@KingSqrl]

Brad, did you share with Sabre? How awesome would a Sabre APEX bullpup be!?

[@jemeljordan-butler4510]

I got a Lynx because of you, Bradley. I’m going to get one of these, too. I wonder how hard it will be to source the hardware in the U.S.?

[@BradleyPhillipsYT]

Good question, would definitely be harder for you I think

[@kahwengliew7697]

I need some time to convert the some parts to imperial so that you guys in US can start your own build.

[@TheDeathReava]

Where did u find the spring its the last piece of the puzzle I cannot find

[@BradleyPhillipsYT]

Best to ask Kimchi, he sent it to me already assembled

[@samdavidson6483]

I know some1 who would make you a Metal SLYNX. They are making me one.

[@BradleyPhillipsYT]

Oh, who?

[@samdavidson6483]

@BradleyPhillipsYT I will ask them they are in Malaysia. I will let you know on Discord.

[@Lockdrew17]

8:30 poor guy....

[@A1dan_12]

Do we know if and when full hardware kits will be available for the Slynx?

[@BradleyPhillipsYT]

No we don't, currently you can only print it yourself and source the hardware yourself

[@L6Kevin-s5j]

China did make a 50 dollor injection molded lynx. rlly light, has built in return spring and does also have metal upgrade parts. it's called 山猫

[@L6Kevin-s5j]

and it actually came out 3 yr's ago and is still in sale. has a stock flat hair trigger that is rlly light. the stock fps is 180 with 1.8 spring

[@gfc9102]

​@@L6Kevin-s5jdo you have a link on where to buy it? Would love to get one

[@blakbuzzrd]

@@L6Kevin-s5j Yeah, but that was IP theft - Dan from Orion didn't license that design. It's not like Shellington Labs getting the Kirin made, or Captain Slug licensing the Caliburn to Worker.

[@L6Kevin-s5j]

Oh yh, not just the licensed Caliburn from Worker(that was only half injection molded)@@blakbuzzrd The same company that made the unlicensed lynx also made a fully injection molded caliburn as well as a zinc 1.0

[@L6Kevin-s5j]

Yeah well, I'm just saying it's out there @@blakbuzzrd

[@LifewithLewi]

Super cool Brad thanks, would really love one but dont have a 3d printer 😭 so the Apex might be the better option for my primary sniper but for cqb dont know if itll be small enough??...unless i find someone in NSW that can help me get my hands on Slynx tyen best of both worlds?

[@BradleyPhillipsYT]

Check with the Nerfers at your group whether any could print it for you

[@FortycadeConcept]

THIS BLASTER MUST COME OUT INJECTION MOLDED SHELL.

[@BradleyPhillipsYT]

It's a red dot sight from Holosun

[@blakbuzzrd]

@8:26 Saddest panda tag ever.

[@noelnicholas8430]

When are you gonna come down to Melbourne for a game?

[@BradleyPhillipsYT]

Would love to come play again, did back in 2019. Maybe sometime in 2024.

[@David_R._8108]

I thought the Sweetheart storm was the best blaster you owned?

[@BradleyPhillipsYT]

Technically it is, but it's pretty long compared to the Slynx.

[@jarodkim6271]

Hey Bradley, where do you find generic (non-threaded) barrels of that length? (i.e. 600mm+)

[@atToebiscuit]

What if you put your old 18kg spring into the Slynx? 330 FPS?

[@BradleyPhillipsYT]

Would be a little too short to get the most out of it

[@m00k61]

Lolol trouble gettin it in

[@wooohooo103]

Is anyone aware if the hardware from the China injection lynx will work in this?

[@BradleyPhillipsYT]

If it's the same specs as a regular Lynx then no, this blaster is longer so most parts are also longer.

[@johnmurcott1273]

the injection molded one is a stolen design

[@zenden9]

​​@@johnmurcott1273 But they sell those lynx at highly affordable price which allows the masses to get access to it. Otherwise , those 3D printed one prices are out of touch with reality. The very reason why these slynx are deems as free for anybody to download. Becos the maker want this hobby to reach a wider audience not trying to make a killing instead.

[@pointhot]

Any source for these springs?

[@kahwengliew7697]

they are custom specs for Slynx but I have released the specs in response to the comment above. You can consider getting your local manufacturer to produce them to you. I have them on my carousell if you are keen, but they are out of stock. Don't recommend you get these spring unless it is for a Slynx.

[@tomfoolery4024]

11th. is your 76 still functional?

[@BradleyPhillipsYT]

Haven't used it since I got the Sweetheart Storm. Kinda made it redundant.

[@darrengreer2600]

Good one brad

[@ihavstupid9232]

The reload looks a bit awkward😂

[@BradleyPhillipsYT]

I'm sure you could get used to it with practice

[@ck2503]

"IM TOO ELITE FOR SLAMFIRE" A dollar for how many times he slamfired in this video.

[@BradleyPhillipsYT]

Not a single shot in this video was slamfire. For every dart fired there was a corresponding trigger reset and pull.

[@FelixstoweFoamForge]

Bullpups are good. But "Bananas"? Is that really an American unit of measurement? Actually, hold that thought... anything is possible withtthat lot.

[@BradleyPhillipsYT]

Pretty sure it's the national unit of measurement there.

[@noelnicholas8430]

first

[@PureIceChill]

Lol no 😂😂