THE SNAP ON JUNKIE TRUCK TOUR AND TOOL BOX TOUR MUST SEE!!!

[@jtplumbing6592]

Appreciate the information at the end there bud. I was leaning towards getting them. But I don't think they would be that practical for my needs.

[@chrissmith6726]

this dude has put 3 of the snap on guy's kids through Harvard law school

[@justind6039]

Awesome video Justin! Hey I just did some research. Snap On used to make those speed wrenches with double open ends. One end was a regular open end with the flank drive plus, the other side was the speed open end. They made them in MM and SAE. Just type in snap on speed wrench on eBay and you'll see them. I keep checking for a complete set of SAE and I'll buy them in a heartbeat. Not only line fittings like you mentioned, these would be fantastic for replacing grease fittings. And I do a ton of those basterds! Thanks Junkie, keep it up!

[@JUSTINSTURGILLTRUCKING]

Justin D thanks Justin I might have to look those up to see because the ones in our waste of money

[@justind6039]

The Snap-On Junkie!!! Agree. Where you need these are places you can't get a closed end on so why make these with the box ratchet side? The double open end with one side flank drive the other speed makes all the sense in the world. Why SO pulled those from production is annoying. Oh well, that's why there is eBay. 👍

[@Fordsuperduty6]

You should do a full tour of your snap on dealers tool box. That would be cool to see!!

[@OffroadTrucker740]

nice video. truck tours are one of my favorites on the tool channels, but touring his peronal garage has just raised the bar.

[@JUSTINSTURGILLTRUCKING]

OffroadTrucker740 thank you I will tell Jason you like it

[@thecomanchekid]

good to have an honest review! i probably wouldnt even bother with them. do you have a set of the extra long zero degree offset wrench from snap on? one of my favorites

[@JUSTINSTURGILLTRUCKING]

Wesley Schafer oh yeah I got those I did a review on

[@bryanbethea8335]

Dude, that toolbox is nuts. I can see those wrenchs being useful on hydraulic fittings too. Those times it's broke loose but has oil on it and you still can't turn it by hand. It would need to be double ended and really short for that though. Happy birthday bro.

[@scottnei]

YOU MY FRIEND ARE VERY LUCKY YOU HAVE A COOL SNAP ON REP. I'M FROM CHICAGO AND BEEN THREW 5 SNAP ON REPS IN SIX YEARS AND HAVE NO ONE NOW

[@JUSTINSTURGILLTRUCKING]

Scott Nei yeah my dude Jason is really cool

[@dashow92]

traded in my regular ratcheting wrenches for the ones in this video probably 6 months ago or so and they are probably the most used tool in my kart, other than air tools. ratcheting end is great for wherever my impact wont go and the open end is awsome for holding a nut on the backside while impacting. doesnt matter where the wrench goes on the nut it'll find a home once you hit the gun, therefore you dont need as much room and its faster.

[@Trucker123.]

Could see the speed wrenches being good for alignments

[@chrisohare1030]

they did make them without the ratcheting end which had a normal box end instead I've got a set i picked up a few year ago. 4.37 in my old toolbox tour video

[@JustinHolloway307]

I agree on those wrenches make them double open ended but still nice set I keep looking at epics but can’t see trading my mr big master series in on one

[@jeremymay8753]

Do you have a part number on those pocket screwdrivers with the valve core remover or know where to buy one? I have been looking everywhere for one of those. I work in a tire shop and am constantly looking for the shop's valve core remover.

[@JUSTINSTURGILLTRUCKING]

Jeremy May On my snap on guy gave it to me I am I will ask him for a part number the next time I see him and get back to you but he gave it to me oh that was like his free screwdriver giveaway that they have on the truck so you might want to ask your snap on guy if they have one

[@jaye1675]

For hydraulic and Trucks air line brass fittings .speed.

[@uhhuh3462]

Love the Snap-On Junkie!

[@DriveShaftDrew]

seen you onThe Disgruntled Mechanic live subbed

[@JUSTINSTURGILLTRUCKING]

DriveShaft Drew thank you

[@speeddr2000]

looks like it would be nice for tight spaces. Where you wrench would get stuck .

[@HardKnocksForge]

I've made a set of those with an older chinese set that were SAE just for one job. Thought I might need them in the future but I've NEVER had to use them again and I think all I used was the 5/8. I like and understand the concept but it's just not really practical unless you work on hydroids or some other kind of fitting like those. I'm sure a guy with a couple of dump trucks could use them every now and again. Might save his ass one day...

[@Garage732]

Nice video but they made these as regular combos years ago. They are great when you can't get a ratcheting box end on the nut.

[@darrenmessenger5655]

What did you get buy off the truck Justin ?

[@geoffclark9820]

I have those speed wrenches. Save your money. If they were in standard I think they would be more useful.

[@lkasdio]

such an empty truck. i guess I'm spoiled with my snap on truck

[@kohl1724]

They make them with a non ratcheting 12 point box end as well. I have one.

[@woodsracing13]

I think those wrenches would be better with a just a normal box end so you can break the bolt loose. I don't like to use ratcheting wrenches for breaking a blot or nut loose. just my opinion. but I don't ever see myself buying those wrenches anyways. haha

[@samrijsmus]

What is the part number for these wrenches.

[@gabriellord7556]

Whats your view on Blue Point? I have been looking into the cheaper prices but are they the same?

[@JUSTINSTURGILLTRUCKING]

Gabriel Lord no the Bluepoint is not the same as snap on they are the Taiwan made tools there kind of similar to like a gear wrench type stuff what if you're an entry-level technician there a good choice to get you started

[@TheSnapOnToolReview]

Definitely not a fan of those wrenches. Too expensive for A very specific use.

[@tomelliott83]

Sweet video. Nice review on those speed wrenches

[@JUSTINSTURGILLTRUCKING]

Thomas Elliott thanks man

[@Garage732]

Also, they previously made these in SAE

[@matthewcox4594]

You can get them in standard box end I have them the start of the part number is SRXM## the the number for the size you want

[@charlieoakes6469]

I have the facom equivalent of those ratchet spanners and they are my daily use spanners. Cant say enough about them

[@davidyoung6608]

Awesome tool box tour.

[@JUSTINSTURGILLTRUCKING]

David Young thanks man

[@CursedPurse]

Holy shit ratcheting open end wrenches finally!

[@JamesBigica]

Awsome vid

[@mike4food]

junky thouse Ratcheting wrenches are on the website it in the wrong place. under the wrench section at the bottom it's under Ratcheting wrenches combination.

[@JUSTINSTURGILLTRUCKING]

mike4food thanks for the info

[@motobum2001]

I have a Craftsman wrench set similar in principle to these. I hate them. Good vid tho.

[@ToolBoxTours]

Amazing toolbox can we showcase your video on our toolbox tours channel?

[@JUSTINSTURGILLTRUCKING]

Is your channel monetized

[@ToolBoxTours]

Yes

[@JUSTINSTURGILLTRUCKING]

ToolBox Tours OK then no

[@ToolBoxTours]

Thanks anyway. great videos by the way I spent almost 3 hours watching your videos today 👍

[@betmon5986]

Grind the speed side off then itl b a decent wrench

[@tomgatschet7848]

Where are you in Ohio? Your trucks look really familiar...

[@JUSTINSTURGILLTRUCKING]

Tom Gatschet Cincinnati

[@adamlemus7585]

I would never be able to sleep if I ran a tool truck. I would sleep in it with a 12guage

[@kylefraser5490]

great video dude can u do a review on bahco sockets

[@JUSTINSTURGILLTRUCKING]

Kyle Fraser they r the same as snap on sockets go to Garnet tools he has one already up

[@kylefraser5490]

The Snap-On Junkie!!! ok dude thanks

[@DOYLECLEVERLOBE1]

Your guy's box is bigger than his truck.

[@johngibson3594]

Very nice video.

[@JUSTINSTURGILLTRUCKING]

John Gibson thanks

[@earlpener]

useful info thanks.

[@harleyadam4813]

I'll be honest, there are other ratcheting open-end wrenches that work slightly better than these, but I doubt I'd buy any of them. All I can say is "gimmicky".

[@gavinsanks5417]

like your vids

[@JUSTINSTURGILLTRUCKING]

Gavin Sanks thanks

[@davidhotz8995]

Awesome Video thanks for the Tool Porn!! FIX....

[@JUSTINSTURGILLTRUCKING]

David Hotz np

[@jameslund221]

I need a valve stem remover

[@B.E.Long.63]

Their just a gimmick, not really good for anything. Best thing about em is it says Snap On,, on the handle....

[@justinclark6053]

Nice video as always. If you guys like the Epic Series check out my 84" Tour!

[@betmon5986]

Speed wrenches r nutin but a bullshit sales pitch

[@bryanbethea8335]

Dude, that toolbox is nuts. I can see those wrenchs being useful on hydraulic fittings too. Those times it's broke loose but has oil on it and you still can't turn it by hand. It would need to be double ended and really short for that though. Happy birthday bro.

[@JUSTINSTURGILLTRUCKING]

Bryan Bethea hey thank you yeah I would buy those wrenches but they need to make them double ended your right and they would be way better