The Supermount - A T700 masterpiece!

[@nickabrahams1]

Nice, You got a link to your shop mate

[@Nerb1]

It should be in the description. sasmcshop.square.site/

[@nickabrahams1]

@@Nerb1 cheers mate, I didn’t realise i on an iPhone that you could see more info by expanding the description

[@Nerb1]

@@nickabrahams1 Ahh. I just pinned your comment so it would be at the top and people can see the link in the comments to because someone else couldnt find the link either. Iphone might be the problem! ;)

[@nickabrahams1]

@@Nerb1 the iPhones not the problem, it’s the dumb asses like me behind it 😉

[@TheRiderGuider]

Ordered. Not too concerned re the vibration … for me the mounting of stuff will be useful 😎

[@wayde4192]

Thanks Nerb , mine fits perfectly, easy to throw on & nice quality & finish. Dash now not jumping around like it’s mounted on a jellyfish. ✅

[@Astonvanquishs]

oh Yeah!!!!!! I need those stickers on my 990!!!

[@bazza8947]

Stickers ordered! I just need to buy a T7 so I can buy the mount now :)

[@Nerb1]

Haha, good onya Bazza.

[@jeffvndeperre1262]

Hope those welds dont break ! as a welder myself i would weld it both sides of the tube. but then again maybe i am overengineering things. keep up the great work love the channel !

[@elderrider9298]

Nice Design

[@MichaelShaw206]

I'm going to purchase a T700 (thank you for your comment reply a few days ago - it helped with my decision). And this bracket is brilliant. But you had me a stickers. :) If I'm out in the mountains, crash and get trapped under the bike and then eaten by a bear, however, I will curse your name. Thanks again for your videos.

[@adv-moto-rider7216]

Happy to help the channel for the content you make knowing what goes into the Videos.. Some stickers always brighten the bike up...

[@Nerb1]

Thanks! They are on their way.

[@michaelcameron8559]

I’ll definitely keep this in mind when I get my T7 next spring!

[@NoobRoutz]

Nice product!.... need a T7 now 😂

[@tahirsharif9461]

Nice simple design and solves a couple of issues.

[@TheRiderGuider]

Ordered. Not too concerned re the vibration … for me the mounting of stuff will be useful 😎

[@lostagain2992]

If I had a T7 I’d buy one! 👍

[@AusJase]

Nice one mate, if I didnt already have the “other” one I would have grab one of yours.......but will grab a couple of stickers......👍

[@Nerb1]

Yeah, the other one is fine and works and a lot of people already have it. There is a lot of T7's sold every day though ;)

[@wobblysauce]

Nicely done.

[@JonibarTeam]

Stickers ordered. I’ll pick them up from you next time. No need to ship, I’ll come and get them!!! “Can probably be used to cover up some scratches from the rides I’ve been doing lately!” 😜

[@Nerb1]

Too late... I just posted all orders and didnt see this comment. We will have to see how long for aus post to deliver ;)

[@cruisin650]

That's a really great idea. Can't imagine how or why they made a dashboard that rattled and moved like that though.

[@Nerb1]

Rubber mounted.... but rubbers were just a bit big!

[@castrejo67]

@7:33 "A bit of a stiffener at the front" LOL, yes I am being extremely childish LMAO , cheers mate, great solution 👍

[@Nerb1]

Unfortunately I cant provide any of those type of stiffeners, but if you come across one, let me know ;)

[@castrejo67]

@@Nerb1 HAHAHAHA 👍

[@slakk5093]

That's a good design...

[@inkironmojo775]

sticker & mount ordered

[@Nerb1]

Packaged. Hopefully I can sneak to the post office tomorrow without getting arrested. Wish me luck.

[@ktm4betarider127]

Yep, good onya!,

[@wonkywheels103]

The speedo and headlight move as one. Just not sure. These types of brackets may create other issues due not allowing flexibility within the securing points of the headlight and speedo. I'm assuming the headlight and speedo are rubber mounted hence the movement.

[@Nerb1]

They are rubber and still are. The cluster just has some excessive movement imo. My bracket doesnt touch the headlight mounts at all. I dont think its an issue, but easier not to do anything if it concerns you.

[@wonkywheels103]

@@Nerb1 I've order one. I like the larger cross bar.

[@Nerb1]

@@wonkywheels103 Whats your initials? I'll make sure yours in a longer one.

[@wonkywheels103]

SW

[@yorkchris10]

Nice clockwork. I think people are wondering about Yamaha's chassis dyno. parameter's.

[@perfectmotoadventurespaulf1968]

Love it

[@billcollins9058]

Nice neat idea will be getting one soon. Ps what tyres do you run on your t7? Cheers

[@Nerb1]

I currently have a motoz rallz front and mitas mc23 rear. Nothing special ;)

[@toby7504]

If l had a t7 l would ordered this, but l dont, so l will order some stickers even if my tiger beak are filled with that old black Nerb1 👍🏻😊 Channel support ofcause mate👍🏻👍🏻

[@Nerb1]

Haha... dont make your bike heavy with too many stickers!

[@toby7504]

@@Nerb1 hehehe l think the bikes weight lies with the rider in my case.

[@johnhoyle7542]

Hi Nerb (AKA Bren), I’ve got your super mount fitted, works well. I’m likely to upgrade from HEMA maps on a phone and quad lock to a Garman Zumo XT and if you have a moment, I’m not sure about the best mount bracket etc for that GPS to the Supermount. I think my options are the Touratech lockable mount or a ram mount, do you have any other suggestions, thoughts or advice? Merry Christmas 🎄 🎅 Thanks John 🙏

[@Nerb1]

Hi John, I have emailed you some options. Let us know which (if any) you go with.

[@ssamorfati]

@@Nerb1 Hi Nerb, I also purchased your super mount which is awesome, however am now looking to mount a Zumo XT2 to it and trying find a suitable mount. So if you or anyone else out there has some options, please let me know. I have found lots of mounts, but none that are large enough for the super mount (which I really like and do not want to change). Thanks in advance, Cheers, Sime

[@Nerb1]

Sime@@ssamorfati Here is a cut and past from an email I sent to someone else about the zumo. If it helps, maybe post back on your youtube post which solution you used so that it helps others. Cheers The zumo usually attaches with a ram ball mount, so you would have something like this: www.ja-gps.com.au/RAM/ram-b-408-75-1u/ attached to the zumo plate with a ball mount and the short arm between them. www.ja-gps.com.au/RAM/ram-347u/ But I think that would stick out too far. I think you would be better with something like: motogps.com.au/25mm-1-handlebar-clamp-gps-mount/ But the price of that is pretty high! This one would be perfect (select 25mm) but is in the USA www.motopumps.com/shop/gps-mount Perun Moto also have one, but it says 28.6mm bars, so you would need a 2mm thick rubber to grip a 25mm bar. Torimoto here in Vic imports Perun Moto stuff: www.perunmoto.com/collections/2021-ktm-1290-super-adventure-r-s/products/handlebar-amps-clamp Im sure there are more options around, but thats the type of thing you are looking for... a low profile mount with the AMPS bolt pattern.

[@JustTex]

Pretty slick design , when is the mudguard lift design coming! Finally i can get a sticker Cheers

[@Nerb1]

Yes, I will make something for that, for sure!

[@JustTex]

@@Nerb1 i knew ya would, just needed some outback qld mud

[@mtscott]

Interestingly the TFT on my BMW doesn’t do that. Just saying 😏 I wonder why Yammie didn’t brace it like that? Sometime stiffness isn’t your friend - it might transfer stresses elsewhere. But well done for your ingenuity.

[@Nerb1]

How much was the beemer?

[@-Luke78-]

These not available anymore?

[@Nerb1]

No. Too expensive. But I make a 3d printed version if you want to try one. Email me.

[@cliveparsons7674]

Bit of trouble finding your shop?could you point me to it.cheers

[@cliveparsons7674]

Found a earlier blog...order placed.🙂

[@Nerb1]

Is there a reason you didnt see it in the video description? I want people to be able to find it, so let me know if you couldnt see it there or reading comments is easier for some reason? I will pin that other comment so people can see that easy also. PS, due to this damn lockdown, I cant go to the workshop and pick up some new brackets. Postage might be a few days away. Hope thats ok. Cheers.

[@dutchie7302]

Nerb could you please provide me with the info on your two light bars? Watts / costs / recommendation, place purchased? Thanks mate

[@Nerb1]

Ebay purchase, 37 bucks the pair, supposed to be 36W each... they have NOTHING on the Rigid Industries SRQ's that i had on the 1190. They work and are ok. I may have been spoiled by the RI pair. I should have kept them and not sold them with the bike :( eBay item number:402488505343

[@JohannesDalenMC]

Nerb, may I ask you which tie-down points you use on your mosko moto r80? I too have a high exhaust and no racks, and I’m finding it hard. Also, which notch on the r80 do you use? Many thanks!

[@Nerb1]

send me an email and I'll send you a photo. I removed the passenger pegs and made up little brackets that bolt to that spot.

[@JohannesDalenMC]

@@Nerb1 Thank you, if you connected to the passenger pegs thats enough information. On the pipe side the pipe rundt too close to the peg, so secured it to the frame next to the engine. Again, thanks :)

[@arnandegans]

I'd probably make the tube/bar a bit longer so it's as wide as the original between the plastic. Edit: But the phone covers it pretty good...

[@Nerb1]

If you want a special order with a full width one, let me know. ;)

[@WrightWayAround]

will u post to uk

[@Nerb1]

Yes... did you buy a T7?

[@WrightWayAround]

@@Nerb1 no I wish out my price range. My 1190 not sell with "hightmiles" only get $9.198.06 for it private. Cam chain now needing replacing it make whird noises on Saturday. Said oil was low I check lot oil left got me home I was 90 miles away when happoned. U lucky not spare bikes here for egeine swap.

[@WrightWayAround]

@@Nerb1 I asking more about stickers add to awesome player collection

[@Nerb1]

@@WrightWayAround oh, of course! Yes, I'll post stickers to you.

[@WrightWayAround]

@@Nerb1 ok I Oder them then

[@kennyatkins6448]

👍🥃🏴󠁧󠁢󠁳󠁣󠁴󠁿